dt-bindings: regulator: Add pf8x00 regulator bindings
Subsystems (3)
Jagan Teki
maintainerPATCH 1/2 dt-bindings: regulator: Add pf8x00 regulator bindings
Add NXP PF8100/PF8121A/PF8200 regulators bindings.
--- .../regulator/nxp,pf8x00-regulator.yaml | 211 ++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml new file +211 -0
@@ -0,0 +1,211 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PF8100/PF8121A/PF8200 PMIC regulators + +maintainers: + - Jagan Teki <[email protected]> + - Troy Kisky <[email protected]> + +description: | + PF8100/PF8121A/PF8200 is a PMIC designed for highperformance consumer + applications. It features seven high efficiency buck converters, four + linear and one vsnvs regulators. It has built-in one time programmable + fuse bank for device configurations. + +properties: + compatible: + enum: + - nxp,pf8x00 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^ldo[1-4]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^ldo[1-4]$" + description: + should be "ldo1", ..., "ldo4" + + unevaluatedProperties: false + + "^buck[1-7]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^buck[1-7]$" + description: + should be "buck1", ..., "buck7" + + nxp,ilim-ma: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 2100 + maximum: 4500 + description: + BUCK regulators current limit in mA. + + Listed current limits in mA are, + 2100 (default) + 2600 + 3000 + 4500 + + nxp,phase-shift: + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 45 + maximum: 0 + description: + BUCK regulators phase shift control in degrees. + + Listed phase shift control values in degrees are, + 45 + 90 + 135 + 180 + 225 + 270 + 315 + 0 (default) + + unevaluatedProperties: false + + "^vsnvs$": + type: object + $ref: regulator.yaml# + description: + Properties for single VSNVS regulator. + + properties: + regulator-name: + pattern: "^vsnvs$" + description: + should be "vsnvs" + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "nxp,pf8x00"; + reg = <0x08>; + + regulators { + reg_ldo1: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_ldo3: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_ldo4: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <1500000>; + }; + + reg_buck1: buck1 { + nxp,ilim-ma = <4500>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck2: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck3: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck4: buck4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck5: buck5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck6: buck6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <400000>; + }; + + reg_buck7: buck7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + }; + + reg_vsnvs: vsnvs { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + }; + }; + }; + };
Signature · 1 line
2.25.1
Jagan Teki
maintainerPATCH 2/2 regulator: Add NXP PF8X00 regulator driver
Add NXP PF8100/PF8121A/PF8200 regulator driver.
PF8100/PF8121A/PF8200 is PMIC designed for highperformance consumer applications. It features seven high efficiency buck, four linear and one vsnvs regulators.
Tested in Engicam i.Core MX8M Mini SOM platform boards.
---
Note: driver referenced from nxp sources, so I kept the initial author and licence as it is. any comments on this regard would appreciated?
MAINTAINERS | 6 + drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/pf8x00-regulator.c | 496 +++++++++++++++++++++++++++ 4 files changed, 511 insertions(+) create mode 100644 drivers/regulator/pf8x00-regulator.c
MAINTAINERS +6 -0
@@ -12672,6 +12672,12 @@ S: Maintained F: Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml F: drivers/gpu/drm/imx/dcss/ +NXP PF8100/PF8121A/PF8200 PMIC REGULATOR DEVICE DRIVER +M: Jagan Teki <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +F: drivers/regulator/pf8x00-regulator.c + NXP PTN5150A CC LOGIC AND EXTCON DRIVER M: Krzysztof Kozlowski <[email protected]> L: [email protected]
drivers/regulator/Kconfig +8 -0
@@ -812,6 +812,14 @@ config REGULATOR_PCF50633 Say Y here to support the voltage regulators and converters on PCF50633 +config REGULATOR_PF8X00 + tristate "NXP PF8100/PF8121A/PF8200 regulator driver" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the regulators found on the NXP + PF8100/PF8121A/PF8200 PMIC. + config REGULATOR_PFUZE100 tristate "Freescale PFUZE100/200/3000/3001 regulator driver" depends on I2C
drivers/regulator/Makefile +1 -0
@@ -102,6 +102,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o +obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
drivers/regulator/pf8x00-regulator.c new file +496 -0
496 lines not on this page · raw message
Signature · 1 line
2.25.1
Mark Brown
maintainerQuoted 1 line · Jagan Teki
Add NXP PF8100/PF8121A/PF8200 regulators bindings.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] regulator: Add pf8x00 regulator bindings
commit: 4b748fb3448b5d39a58cdea55d72e8dcd128f4c6
[2/2] regulator: Add NXP PF8X00 regulator driver
commit: d3795d6321ecaa55d94dc24c3b1e3cce608aabd6All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark