Skip to contentSkip to conversation

powerpc/pci: Remove LSI mappings on device teardown

PATCH Applied Alexey Kardashevskiy 4 participants 4 messages Dec 2, 2020 – Dec 10, 2020 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 powerpc/pci: Remove LSI mappings on device teardown

From: Oliver O'Halloran <[email protected]>

When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed.

This problem can be fixed by adding the corresponding unmap operation when the device is removed. There's no pcibios_* hook for the remove case, but the same effect can be achieved using a bus notifier.

Because INTx are shared among PHBs (and potentially across the system), this adds tracking of virq to unmap them only when the last user is gone.

---
Changes:
v3:
* free @vi on error path

v2:
* added refcounter

---
 arch/powerpc/kernel/pci-common.c | 82 ++++++++++++++++++++++++++++++--
 1 file changed, 78 insertions(+), 4 deletions(-)
arch/powerpc/kernel/pci-common.c +78 -4
index be108616a721..2b555997b295 100644
@@ -353,6 +353,55 @@ struct pci_controller *pci_find_controller_for_domain(int domain_nr)
 	return NULL;
 }
 
+struct pci_intx_virq {
+	int virq;
+	struct kref kref;
+	struct list_head list_node;
+};
+
+static LIST_HEAD(intx_list);
+static DEFINE_MUTEX(intx_mutex);
+
+static void ppc_pci_intx_release(struct kref *kref)
+{
+	struct pci_intx_virq *vi = container_of(kref, struct pci_intx_virq, kref);
+
+	list_del(&vi->list_node);
+	irq_dispose_mapping(vi->virq);
+	kfree(vi);
+}
+
+static int ppc_pci_unmap_irq_line(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct pci_dev *pdev = to_pci_dev(data);
+
+	if (action == BUS_NOTIFY_DEL_DEVICE) {
+		struct pci_intx_virq *vi;
+
+		mutex_lock(&intx_mutex);
+		list_for_each_entry(vi, &intx_list, list_node) {
+			if (vi->virq == pdev->irq) {
+				kref_put(&vi->kref, ppc_pci_intx_release);
+				break;
+			}
+		}
+		mutex_unlock(&intx_mutex);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_pci_unmap_irq_notifier = {
+	.notifier_call = ppc_pci_unmap_irq_line,
+};
+
+static int ppc_pci_register_irq_notifier(void)
+{
+	return bus_register_notifier(&pci_bus_type, &ppc_pci_unmap_irq_notifier);
+}
+arch_initcall(ppc_pci_register_irq_notifier);
+
 /*
  * Reads the interrupt pin to determine if interrupt is use by card.
  * If the interrupt is used, then gets the interrupt line from the
@@ -361,6 +410,12 @@ struct pci_controller *pci_find_controller_for_domain(int domain_nr)
 static int pci_read_irq_line(struct pci_dev *pci_dev)
 {
 	int virq;
+	struct pci_intx_virq *vi, *vitmp;
+
+	/* Preallocate vi as rewind is complex if this fails after mapping */
+	vi = kzalloc(sizeof(struct pci_intx_virq), GFP_KERNEL);
+	if (!vi)
+		return -1;
 
 	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
 
@@ -377,12 +432,12 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 		 * function.
 		 */
 		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
-			return -1;
+			goto error_exit;
 		if (pin == 0)
-			return -1;
+			goto error_exit;
 		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
 		    line == 0xff || line == 0) {
-			return -1;
+			goto error_exit;
 		}
 		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
 			 line, pin);
@@ -394,14 +449,33 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 
 	if (!virq) {
 		pr_debug(" Failed to map !\n");
-		return -1;
+		goto error_exit;
 	}
 
 	pr_debug(" Mapped to linux irq %d\n", virq);
 
 	pci_dev->irq = virq;
 
+	mutex_lock(&intx_mutex);
+	list_for_each_entry(vitmp, &intx_list, list_node) {
+		if (vitmp->virq == virq) {
+			kref_get(&vitmp->kref);
+			kfree(vi);
+			vi = NULL;
+			break;
+		}
+	}
+	if (vi) {
+		vi->virq = virq;
+		kref_init(&vi->kref);
+		list_add_tail(&vi->list_node, &intx_list);
+	}
+	mutex_unlock(&intx_mutex);
+
 	return 0;
+error_exit:
+	kfree(vi);
+	return -1;
 }
 
 /*
Signature · 1 line
2.17.1
Reviewed-by on v3 1/1
#1 lore raw
Quoted 15 lines · Alexey Kardashevskiy

From: Oliver O'Halloran <[email protected]>

When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed.

This problem can be fixed by adding the corresponding unmap operation when the device is removed. There's no pcibios_* hook for the remove case, but the same effect can be achieved using a bus notifier.

Quoted 7 lines

Because INTx are shared among PHBs (and potentially across the system), this adds tracking of virq to unmap them only when the last user is gone.

---

Looks ok to me.

Quoted 135 lines

Changes:
v3:
* free @vi on error path

v2:
* added refcounter

---
  arch/powerpc/kernel/pci-common.c | 82 ++++++++++++++++++++++++++++++--
  1 file changed, 78 insertions(+), 4 deletions(-)
arch/powerpc/kernel/pci-common.c +78 -4
index be108616a721..2b555997b295 100644
@@ -353,6 +353,55 @@ struct pci_controller *pci_find_controller_for_domain(int domain_nr)
  	return NULL;
  }
 
+struct pci_intx_virq {
+	int virq;
+	struct kref kref;
+	struct list_head list_node;
+};
+
+static LIST_HEAD(intx_list);
+static DEFINE_MUTEX(intx_mutex);
+
+static void ppc_pci_intx_release(struct kref *kref)
+{
+	struct pci_intx_virq *vi = container_of(kref, struct pci_intx_virq, kref);
+
+	list_del(&vi->list_node);
+	irq_dispose_mapping(vi->virq);
+	kfree(vi);
+}
+
+static int ppc_pci_unmap_irq_line(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct pci_dev *pdev = to_pci_dev(data);
+
+	if (action == BUS_NOTIFY_DEL_DEVICE) {
+		struct pci_intx_virq *vi;
+
+		mutex_lock(&intx_mutex);
+		list_for_each_entry(vi, &intx_list, list_node) {
+			if (vi->virq == pdev->irq) {
+				kref_put(&vi->kref, ppc_pci_intx_release);
+				break;
+			}
+		}
+		mutex_unlock(&intx_mutex);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_pci_unmap_irq_notifier = {
+	.notifier_call = ppc_pci_unmap_irq_line,
+};
+
+static int ppc_pci_register_irq_notifier(void)
+{
+	return bus_register_notifier(&pci_bus_type, &ppc_pci_unmap_irq_notifier);
+}
+arch_initcall(ppc_pci_register_irq_notifier);
+
  /*
   * Reads the interrupt pin to determine if interrupt is use by card.
   * If the interrupt is used, then gets the interrupt line from the
@@ -361,6 +410,12 @@ struct pci_controller *pci_find_controller_for_domain(int domain_nr)
  static int pci_read_irq_line(struct pci_dev *pci_dev)
  {
  	int virq;
+	struct pci_intx_virq *vi, *vitmp;
+
+	/* Preallocate vi as rewind is complex if this fails after mapping */
+	vi = kzalloc(sizeof(struct pci_intx_virq), GFP_KERNEL);
+	if (!vi)
+		return -1;
 
  	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
 
@@ -377,12 +432,12 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
  		 * function.
  		 */
  		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
-			return -1;
+			goto error_exit;
  		if (pin == 0)
-			return -1;
+			goto error_exit;
  		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
  		    line == 0xff || line == 0) {
-			return -1;
+			goto error_exit;
  		}
  		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
  			 line, pin);
@@ -394,14 +449,33 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 
  	if (!virq) {
  		pr_debug(" Failed to map !\n");
-		return -1;
+		goto error_exit;
  	}
 
  	pr_debug(" Mapped to linux irq %d\n", virq);
 
  	pci_dev->irq = virq;
 
+	mutex_lock(&intx_mutex);
+	list_for_each_entry(vitmp, &intx_list, list_node) {
+		if (vitmp->virq == virq) {
+			kref_get(&vitmp->kref);
+			kfree(vi);
+			vi = NULL;
+			break;
+		}
+	}
+	if (vi) {
+		vi->virq = virq;
+		kref_init(&vi->kref);
+		list_add_tail(&vi->list_node, &intx_list);
+	}
+	mutex_unlock(&intx_mutex);
+
  	return 0;
+error_exit:
+	kfree(vi);
+	return -1;
  }
 
  /*
Reviewed-by Tested-by on v3 1/1
#2 lore raw
In reply to Alexey Kardashevskiy
Quoted 15 lines · Alexey Kardashevskiy

From: Oliver O'Halloran <[email protected]>

When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed.

This problem can be fixed by adding the corresponding unmap operation when the device is removed. There's no pcibios_* hook for the remove case, but the same effect can be achieved using a bus notifier.

Quoted 6 lines

Because INTx are shared among PHBs (and potentially across the system), this adds tracking of virq to unmap them only when the last user is gone.

I did some PHB hotplug tests on a KVM guest and a LPAR using only LSIs.

Thanks Alexey,

C.

Quoted 136 lines

---
Changes:
v3:
* free @vi on error path

v2:
* added refcounter

---
 arch/powerpc/kernel/pci-common.c | 82 ++++++++++++++++++++++++++++++--
 1 file changed, 78 insertions(+), 4 deletions(-)
arch/powerpc/kernel/pci-common.c +78 -4
index be108616a721..2b555997b295 100644
@@ -353,6 +353,55 @@ struct pci_controller *pci_find_controller_for_domain(int domain_nr)
 	return NULL;
 }
 
+struct pci_intx_virq {
+	int virq;
+	struct kref kref;
+	struct list_head list_node;
+};
+
+static LIST_HEAD(intx_list);
+static DEFINE_MUTEX(intx_mutex);
+
+static void ppc_pci_intx_release(struct kref *kref)
+{
+	struct pci_intx_virq *vi = container_of(kref, struct pci_intx_virq, kref);
+
+	list_del(&vi->list_node);
+	irq_dispose_mapping(vi->virq);
+	kfree(vi);
+}
+
+static int ppc_pci_unmap_irq_line(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct pci_dev *pdev = to_pci_dev(data);
+
+	if (action == BUS_NOTIFY_DEL_DEVICE) {
+		struct pci_intx_virq *vi;
+
+		mutex_lock(&intx_mutex);
+		list_for_each_entry(vi, &intx_list, list_node) {
+			if (vi->virq == pdev->irq) {
+				kref_put(&vi->kref, ppc_pci_intx_release);
+				break;
+			}
+		}
+		mutex_unlock(&intx_mutex);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_pci_unmap_irq_notifier = {
+	.notifier_call = ppc_pci_unmap_irq_line,
+};
+
+static int ppc_pci_register_irq_notifier(void)
+{
+	return bus_register_notifier(&pci_bus_type, &ppc_pci_unmap_irq_notifier);
+}
+arch_initcall(ppc_pci_register_irq_notifier);
+
 /*
  * Reads the interrupt pin to determine if interrupt is use by card.
  * If the interrupt is used, then gets the interrupt line from the
@@ -361,6 +410,12 @@ struct pci_controller *pci_find_controller_for_domain(int domain_nr)
 static int pci_read_irq_line(struct pci_dev *pci_dev)
 {
 	int virq;
+	struct pci_intx_virq *vi, *vitmp;
+
+	/* Preallocate vi as rewind is complex if this fails after mapping */
+	vi = kzalloc(sizeof(struct pci_intx_virq), GFP_KERNEL);
+	if (!vi)
+		return -1;
 
 	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
 
@@ -377,12 +432,12 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 		 * function.
 		 */
 		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
-			return -1;
+			goto error_exit;
 		if (pin == 0)
-			return -1;
+			goto error_exit;
 		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
 		    line == 0xff || line == 0) {
-			return -1;
+			goto error_exit;
 		}
 		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
 			 line, pin);
@@ -394,14 +449,33 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 
 	if (!virq) {
 		pr_debug(" Failed to map !\n");
-		return -1;
+		goto error_exit;
 	}
 
 	pr_debug(" Mapped to linux irq %d\n", virq);
 
 	pci_dev->irq = virq;
 
+	mutex_lock(&intx_mutex);
+	list_for_each_entry(vitmp, &intx_list, list_node) {
+		if (vitmp->virq == virq) {
+			kref_get(&vitmp->kref);
+			kfree(vi);
+			vi = NULL;
+			break;
+		}
+	}
+	if (vi) {
+		vi->virq = virq;
+		kref_init(&vi->kref);
+		list_add_tail(&vi->list_node, &intx_list);
+	}
+	mutex_unlock(&intx_mutex);
+
 	return 0;
+error_exit:
+	kfree(vi);
+	return -1;
 }
 
 /*
#3 lore raw
In reply to Alexey Kardashevskiy
Quoted 10 lines · Alexey Kardashevskiy

When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed.

[...]

Applied to powerpc/next.

[1/1] powerpc/pci: Remove LSI mappings on device teardown

      https://git.kernel.org/powerpc/c/450be4960a0fb89b931a6bb3c3f0bb538ac4c03c

cheers