Skip to contentSkip to conversation

Remove auth_user_pass.wait_for_push variable

PATCH In review Arne Schwabe 2 participants 2 messages Dec 2, 2020

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Remove auth_user_pass.wait_for_push variable

This variable was first introduce in earlier attempt to fix the auth-token problems with auth-nocache before user_password and auth_token were split into two variables. The idea of the variable it is being set if --pull is in use. However the variable was not always set correctly, especially if username/password are queried after an expired auth-token. Instead using that variable use session->opt->pull directly.

Patch V2: rename delayed_auth_pass_purge to ssl_clean_user_pass to give
a more fitting name since this function is not only used in the dealyed code path and also the new name aligns with ssl_clean_auth_token. Also fix a leftover wait_for_push in that function

---
 src/openvpn/init.c   |  2 +-
 src/openvpn/manage.c |  1 -
 src/openvpn/misc.h   |  1 -
 src/openvpn/ssl.c    | 10 ++++------
 src/openvpn/ssl.h    |  5 ++++-
 5 files changed, 9 insertions(+), 10 deletions(-)
src/openvpn/init.c +1 -1
index 2291a89a..27a4170d 100644
@@ -1615,7 +1615,7 @@ initialization_sequence_completed(struct context *c, const unsigned int flags)
      */
     if (c->options.mode == MODE_POINT_TO_POINT)
     {
-        delayed_auth_pass_purge();
+        ssl_clean_user_pass();
     }
 
     /* Test if errors */
src/openvpn/manage.c +0 -1
index 68b136fb..446b82f4 100644
@@ -3579,7 +3579,6 @@ management_query_user_pass(struct management *man,
         {
             /* preserve caller's settings */
             man->connection.up_query.nocache = up->nocache;
-            man->connection.up_query.wait_for_push = up->wait_for_push;
             *up = man->connection.up_query;
         }
         secure_memzero(&man->connection.up_query, sizeof(man->connection.up_query));
src/openvpn/misc.h +0 -1
index 8c3a1227..e4342b0d 100644
@@ -64,7 +64,6 @@ struct user_pass
 {
     bool defined;
     bool nocache;
-    bool wait_for_push; /* true if this object is waiting for a push-reply */
 
 /* max length of username/password */
 #ifdef ENABLE_PKCS11
src/openvpn/ssl.c +4 -6
index 950bf421..efbf688f 100644
@@ -434,8 +434,6 @@ ssl_set_auth_nocache(void)
 {
     passbuf.nocache = true;
     auth_user_pass.nocache = true;
-    /* wait for push-reply, because auth-token may still need the username */
-    auth_user_pass.wait_for_push = true;
 }
 
 /*
@@ -2414,14 +2412,15 @@ key_method_2_write(struct buffer *buf, struct tls_session *session)
         }
         /* if auth-nocache was specified, the auth_user_pass object reaches
          * a "complete" state only after having received the push-reply
-         * message.
+         * message. The push message might contain an auth-token that needs
+         * the username of auth_user_pass.
          *
          * For this reason, skip the purge operation here if no push-reply
          * message has been received yet.
          *
          * This normally happens upon first negotiation only.
          */
-        if (!auth_user_pass.wait_for_push)
+        if (!session->opt->pull)
         {
             purge_user_pass(&auth_user_pass, false);
         }
@@ -4195,8 +4194,7 @@ done:
 }
 
 void
-delayed_auth_pass_purge(void)
+ssl_clean_user_pass(void)
 {
-    auth_user_pass.wait_for_push = false;
     purge_user_pass(&auth_user_pass, false);
 }
src/openvpn/ssl.h +4 -1
index f3032dab..56034540 100644
@@ -592,7 +592,10 @@ void extract_x509_field_test(void);
  */
 bool is_hard_reset_method2(int op);
 
-void delayed_auth_pass_purge(void);
+/**
+ * Cleans the saved user/password unless auth-nocache is in use.
+ */
+void ssl_clean_user_pass(void);
 
 
 /*
Signature · 1 line
2.26.2
Acked-by on v2 1/1
#1 lore raw

I have pre-tested these changes extensively yesterday, trying to find new and exciting ways to break the combination of (async) plugin-auth, gen-auth-token, and --auth-nocache on the client - and this patchset finally makes this all work correctly :-)

(my suggestion how to tackle this would have always stored the auth username, even if no token auth in use, which seems to violate the original principle of --auth-nocache)

Tested again with pristine master sources with only this patch applied, and it still works.

Your patch has been applied to the master, release/2.5 and release/2.4 branch (bugfix).

commit dfd624b52bce7ddd0eeaab516df9848e432f3242 (master) commit 570f0564afb34ede41c99bf66f1f369bcf38b138 (release/2.5) commit 607dfa9648e9967f89d2ce5bf949e90503011522 (release/2.4)

Author: Arne Schwabe
Date:   Wed Dec 2 12:59:28 2020 +0100
     Remove auth_user_pass.wait_for_push variable

     Signed-off-by: Arne Schwabe <[email protected]...>
     Acked-by: Gert Doering <[email protected]...>
     Message-Id: <[email protected]...>
     URL: https://www.mail-archive.com/[email protected]/msg21297.html
     Signed-off-by: Gert Doering <[email protected]...>

--
kind regards,

Gert Doering