hwmon:Driver for Delta power supplies Q54SJ108A2
Subsystems (2)
PATCH v10 1/1 hwmon:Driver for Delta power supplies Q54SJ108A2
From: "xiao.ma" <[email protected]>
The driver supports Q54SJ108A2 series modules of Delta. Standard attributes are in sysfs, and other attributes are in debugfs.
---
Notes:
Patch v2 changelog:
Add delta.rst in Documentation/hwmon.
Tristate "DELTA" in Kconfig is changed to "DELTA_POWER_SUPPLIED".
Modify code: drop the excessive empty lines, correct the comment content, adjust indent, remove extra brackets.
Patch v3 changelog:
Add delta.rst to Documentation/hwmon/index.rst.
Tristate "DELTA_POWER_SUPPLIES" in Kconfig is changed to "Delta Power Supplies".
Patch v4 changelog:
Correct the spelling "Temperature" in the delta.rst.
Add Write_protect when write command VOUT_OV_RESPONSE and IOUT_OC_FAULT_RESPONSE.
Patch v5 changelog:
Add some non-standard attributes in sysfs system.
Patch v6 changelog:
delta.c and delta.rst are renamed to q54sj108a2.c and q54sj108a2.rst.
Add q54sj108a2 to index.rst.
Tristate in Kconfig is changed to "Delta Power Supplies Q54SJ108A2".
The non-standard attributes are added to debugfs.
Patch v7 changelog:
Use standard fuctions bin2hex and hex2bin.
The return of debugfs write is changed to count.
Drop the error checking of debugfs fuctions.
Use probe_new fuction.
Remove the .remove fuction.
Patch v8 changelog:
Use kstrtou8_from_user instead of hex2bin.
Remove included head files which are not used.
Done label in debugfs_read fuction is deleted.
Change email to send the patch.
Patch v9 changelog:
Fix the compile errors and warnings.
Patch v10 changelog:
Fix the reports from checkpatch.
Name of driver is changed to "q54sj108a2".
Documentation/hwmon/index.rst | 1 + Documentation/hwmon/q54sj108a2.rst | 54 ++++ drivers/hwmon/pmbus/Kconfig | 9 + drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/q54sj108a2.c | 422 +++++++++++++++++++++++++++++ 5 files changed, 487 insertions(+) create mode 100644 Documentation/hwmon/q54sj108a2.rst create mode 100644 drivers/hwmon/pmbus/q54sj108a2.c
Documentation/hwmon/index.rst +1 -0
@@ -148,6 +148,7 @@ Hardware Monitoring Kernel Drivers powr1220 pxe1610 pwm-fan + q54sj108a2 raspberrypi-hwmon sch5627 sch5636
Documentation/hwmon/q54sj108a2.rst new file +54 -0
54 lines not on this page · raw message
drivers/hwmon/pmbus/Kconfig +9 -0
@@ -229,6 +229,15 @@ config SENSORS_PXE1610 This driver can also be built as a module. If so, the module will be called pxe1610. +config SENSORS_Q54SJ108A2 + tristate "Delta Power Supplies Q54SJ108A2" + help + If you say yes here you get hardware monitoring support for Delta + Q54SJ108A2 series Power Supplies. + + This driver can also be built as a module. If so, the module will + be called q54sj108a2. + config SENSORS_TPS40422 tristate "TI TPS40422" help
drivers/hwmon/pmbus/Makefile +1 -0
@@ -26,6 +26,7 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o +obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
drivers/hwmon/pmbus/q54sj108a2.c new file +422 -0
422 lines not on this page · raw message
Signature · 1 line
2.25.1
Quoted 6 lines · xiao.ma
From: "xiao.ma" <[email protected]>
The driver supports Q54SJ108A2 series modules of Delta. Standard attributes are in sysfs, and other attributes are in debugfs.
Signed-off-by xiao.ma <[email protected]>
Applied.
Thanks,
Guenter
Quoted 578 lines
---
Notes:
Patch v2 changelog:
Adddelta.rstinDocumentation/hwmon.
Tristate "DELTA" inKconfigis changed to "DELTA_POWER_SUPPLIED".
Modify code: drop the excessive empty lines, correct the comment content, adjust indent, remove extra brackets.
Patch v3 changelog:
Adddelta.rsttoDocumentation/hwmon/index.rst.
Tristate "DELTA_POWER_SUPPLIES" inKconfigis changed to "Delta Power Supplies".
Patch v4 changelog:
Correct the spelling "Temperature" in thedelta.rst.
AddWrite_protectwhen write commandVOUT_OV_RESPONSEandIOUT_OC_FAULT_RESPONSE.
Patch v5 changelog:
Add some non-standard attributes in sysfs system.
Patch v6 changelog:
delta.canddelta.rstare renamed toq54sj108a2.candq54sj108a2.rst.
Add q54sj108a2 toindex.rst.
Tristate inKconfigis changed to "Delta Power Supplies Q54SJ108A2".
The non-standard attributes are added to debugfs.
Patch v7 changelog:
Use standard fuctions bin2hex and hex2bin.
The return of debugfs write is changed to count.
Drop the error checking of debugfs fuctions.
Useprobe_newfuction.
Remove the .remove fuction.
Patch v8 changelog:
Usekstrtou8_from_userinstead of hex2bin.
Remove included head files which are not used.
Done label indebugfs_readfuction is deleted.
Change email to send the patch.
Patch v9 changelog:
Fix the compile errors and warnings.
Patch v10 changelog:
Fix the reports from checkpatch.
Name of driver is changed to "q54sj108a2".Documentation/hwmon/index.rst | 1 + Documentation/hwmon/q54sj108a2.rst | 54 ++++ drivers/hwmon/pmbus/Kconfig | 9 + drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/q54sj108a2.c | 422 +++++++++++++++++++++++++++++ 5 files changed, 487 insertions(+) create mode 100644 Documentation/hwmon/q54sj108a2.rst create mode 100644 drivers/hwmon/pmbus/q54sj108a2.cDocumentation/hwmon/index.rst +1
-0@@ -148,6 +148,7 @@ Hardware Monitoring Kernel Drivers powr1220 pxe1610 pwm-fan + q54sj108a2 raspberrypi-hwmon sch5627 sch5636Documentation/hwmon/q54sj108a2.rst new file +54
-0@@ -0,0 +1,54 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver q54sj108a2 +===================== + +Supported chips: + + * DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH, Q54SJ108A2NCPG, Q54SJ108A2NCPH + + Prefix: 'Q54SJ108A2' + + Addresses scanned: - + + Datasheet: https://filecenter.delta-china.com.cn/products/download/01/0102/datasheet/DS_Q54SJ108A2.pdf + +Authors: + Xiao.ma <[email protected]> + + +Description +----------- + +This driver implements support for DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH, +Q54SJ108A2NCPG, and Q54SJ108A2NCPH 1/4 Brick DC/DC Regulated Power Module +with PMBus support. + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + + +Sysfs entries +------------- + +===================== ===== ================================================== +curr1_alarm RO Output current alarm +curr1_input RO Output current +curr1_label RO 'iout1' +in1_alarm RO Input voltage alarm +in1_input RO Input voltage +in1_label RO 'vin' +in2_alarm RO Output voltage alarm +in2_input RO Output voltage +in2_label RO 'vout1' +temp1_alarm RO Temperature alarm +temp1_input RO Chip temperature +===================== ===== ==================================================drivers/hwmon/pmbus/Kconfig +9
-0@@ -229,6 +229,15 @@ config SENSORS_PXE1610 This driver can also be built as a module. If so, the module will be called pxe1610. +config SENSORS_Q54SJ108A2 + tristate "Delta Power Supplies Q54SJ108A2" + help + If you say yes here you get hardware monitoring support for Delta + Q54SJ108A2 series Power Supplies. + + This driver can also be built as a module. If so, the module will + be called q54sj108a2. + config SENSORS_TPS40422 tristate "TI TPS40422" helpdrivers/hwmon/pmbus/Makefile +1
-0@@ -26,6 +26,7 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o +obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.odrivers/hwmon/pmbus/q54sj108a2.c new file +422
-0@@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* +* Driver for Delta modules, Q54SJ108A2 series 1/4 Brick DC/DC +* Regulated Power Module +* +* Copyright 2020 Delta LLC. +*/ + +#include <linux/debugfs.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +#define STORE_DEFAULT_ALL 0x11 +#define ERASE_BLACKBOX_DATA 0xD1 +#define READ_HISTORY_EVENT_NUMBER 0xD2 +#define READ_HISTORY_EVENTS 0xE0 +#define SET_HISTORY_EVENT_OFFSET 0xE1 +#define PMBUS_FLASH_KEY_WRITE 0xEC + +enum chips { + q54sj108a2 +}; + +enum { +Q54SJ108A2_DEBUGFS_OPERATION =0 , +Q54SJ108A2_DEBUGFS_CLEARFAULT , +Q54SJ108A2_DEBUGFS_WRITEPROTECT , +Q54SJ108A2_DEBUGFS_STOREDEFAULT , +Q54SJ108A2_DEBUGFS_VOOV_RESPONSE , +Q54SJ108A2_DEBUGFS_IOOC_RESPONSE , +Q54SJ108A2_DEBUGFS_PMBUS_VERSION , +Q54SJ108A2_DEBUGFS_MFR_ID , +Q54SJ108A2_DEBUGFS_MFR_MODEL , +Q54SJ108A2_DEBUGFS_MFR_REVISION , +Q54SJ108A2_DEBUGFS_MFR_LOCATION , +Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE , +Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET , +Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET , +Q54SJ108A2_DEBUGFS_BLACKBOX_READ , +Q54SJ108A2_DEBUGFS_FLASH_KEY , +Q54SJ108A2_DEBUGFS_NUM_ENTRIES +}; + +struct q54sj108a2_data { +enum chips chip; +struct i2c_client *client; + +int debugfs_entries[Q54SJ108A2_DEBUGFS_NUM_ENTRIES ]; +}; + +#define to_psu (x, y) container_of((x), struct q54sj108a2_data, debugfs_entries[(y)]) + +static struct pmbus_driver_info q54sj108a2_info[] = { + [q54sj108a2] = { + .pages =1 , + +/* Source : Delta Q54SJ108A2 */ + .format[PSC_TEMPERATURE ] = linear, + .format[PSC_VOLTAGE_IN ] = linear, + .format[PSC_CURRENT_OUT ] = linear, + + .func[0 ] =PMBUS_HAVE_VIN | +PMBUS_HAVE_VOUT |PMBUS_HAVE_STATUS_VOUT | +PMBUS_HAVE_IOUT |PMBUS_HAVE_STATUS_IOUT | +PMBUS_HAVE_TEMP |PMBUS_HAVE_STATUS_TEMP | +PMBUS_HAVE_STATUS_INPUT , + }, +}; + +static ssize_t q54sj108a2_debugfs_read (struct file *file,char __user *buf, +size_t count,loff_t *ppos) +{ +int rc; +int *idxp = file->private_data; +int idx = *idxp; +struct q54sj108a2_data *psu =to_psu (idxp, idx); +char data[I2C_SMBUS_BLOCK_MAX +2 ] = {0 }; +char data_char[I2C_SMBUS_BLOCK_MAX +2 ] = {0 }; +char *res; + +switch (idx) { +case Q54SJ108A2_DEBUGFS_OPERATION : + rc =i2c_smbus_read_byte_data (psu->client,PMBUS_OPERATION ); +if (rc <0 ) +return rc; + + rc =snprintf (data,3 ,"%02x" , rc); +break ; +case Q54SJ108A2_DEBUGFS_WRITEPROTECT : + rc =i2c_smbus_read_byte_data (psu->client,PMBUS_WRITE_PROTECT ); +if (rc <0 ) +return rc; + + rc =snprintf (data,3 ,"%02x" , rc); +break ; +case Q54SJ108A2_DEBUGFS_VOOV_RESPONSE : + rc =i2c_smbus_read_byte_data (psu->client,PMBUS_VOUT_OV_FAULT_RESPONSE ); +if (rc <0 ) +return rc; + + rc =snprintf (data,3 ,"%02x" , rc); +break ; +case Q54SJ108A2_DEBUGFS_IOOC_RESPONSE : + rc =i2c_smbus_read_byte_data (psu->client,PMBUS_IOUT_OC_FAULT_RESPONSE ); +if (rc <0 ) +return rc; + + rc =snprintf (data,3 ,"%02x" , rc); +break ; +case Q54SJ108A2_DEBUGFS_PMBUS_VERSION : + rc =i2c_smbus_read_byte_data (psu->client,PMBUS_REVISION ); +if (rc <0 ) +return rc; + + rc =snprintf (data,3 ,"%02x" , rc); +break ; +case Q54SJ108A2_DEBUGFS_MFR_ID : + rc =i2c_smbus_read_block_data (psu->client,PMBUS_MFR_ID , data); +if (rc <0 ) +return rc; +break ; +case Q54SJ108A2_DEBUGFS_MFR_MODEL : + rc =i2c_smbus_read_block_data (psu->client,PMBUS_MFR_MODEL , data); +if (rc <0 ) +return rc; +break ; +case Q54SJ108A2_DEBUGFS_MFR_REVISION : + rc =i2c_smbus_read_block_data (psu->client,PMBUS_MFR_REVISION , data); +if (rc <0 ) +return rc; +break ; +case Q54SJ108A2_DEBUGFS_MFR_LOCATION : + rc =i2c_smbus_read_block_data (psu->client,PMBUS_MFR_LOCATION , data); +if (rc <0 ) +return rc; +break ; +case Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET : + rc =i2c_smbus_read_byte_data (psu->client,READ_HISTORY_EVENT_NUMBER ); +if (rc <0 ) +return rc; + + rc =snprintf (data,3 ,"%02x" , rc); +break ; +case Q54SJ108A2_DEBUGFS_BLACKBOX_READ : + rc =i2c_smbus_read_block_data (psu->client,READ_HISTORY_EVENTS , data); +if (rc <0 ) +return rc; + + res =bin2hex (data, data_char,32 ); + rc = res - data; + +break ; +case Q54SJ108A2_DEBUGFS_FLASH_KEY : + rc =i2c_smbus_read_block_data (psu->client,PMBUS_FLASH_KEY_WRITE , data); +if (rc <0 ) +return rc; + + res =bin2hex (data, data_char,4 ); + rc = res - data; + +break ; +default : +return -EINVAL ; + } + + data[rc] ='\n' ; + rc +=2 ; + +return simple_read_from_buffer (buf, count, ppos, data, rc); +} + +static ssize_t q54sj108a2_debugfs_write (struct file *file,const char __user *buf, +size_t count,loff_t *ppos) +{ +u8 flash_key[4 ]; +u8 dst_data; +ssize_t rc; +int *idxp = file->private_data; +int idx = *idxp; +struct q54sj108a2_data *psu =to_psu (idxp, idx); + + rc =i2c_smbus_write_byte_data (psu->client,PMBUS_WRITE_PROTECT ,0 ); +if (rc) +return rc; + +switch (idx) { +case Q54SJ108A2_DEBUGFS_OPERATION : + rc =kstrtou8_from_user (buf, count,0 , &dst_data); +if (rc <0 ) +return rc; + + rc =i2c_smbus_write_byte_data (psu->client,PMBUS_OPERATION , dst_data); +if (rc <0 ) +return rc; + +break ; +case Q54SJ108A2_DEBUGFS_CLEARFAULT : + rc =i2c_smbus_write_byte (psu->client,PMBUS_CLEAR_FAULTS ); +if (rc <0 ) +return rc; + +break ; +case Q54SJ108A2_DEBUGFS_STOREDEFAULT : + flash_key[0 ] =0x7E ; + flash_key[1 ] =0x15 ; + flash_key[2 ] =0xDC ; + flash_key[3 ] =0x42 ; + rc =i2c_smbus_write_block_data (psu->client,PMBUS_FLASH_KEY_WRITE ,4 , flash_key); +if (rc <0 ) +return rc; + + rc =i2c_smbus_write_byte (psu->client,STORE_DEFAULT_ALL ); +if (rc <0 ) +return rc; + +break ; +case Q54SJ108A2_DEBUGFS_VOOV_RESPONSE : + rc =kstrtou8_from_user (buf, count,0 , &dst_data); +if (rc <0 ) +return rc; + + rc =i2c_smbus_write_byte_data (psu->client,PMBUS_VOUT_OV_FAULT_RESPONSE , dst_data); +if (rc <0 ) +return rc; + +break ; +case Q54SJ108A2_DEBUGFS_IOOC_RESPONSE : + rc =kstrtou8_from_user (buf, count,0 , &dst_data); +if (rc <0 ) +return rc; + + rc =i2c_smbus_write_byte_data (psu->client,PMBUS_IOUT_OC_FAULT_RESPONSE , dst_data); +if (rc <0 ) +return rc; + +break ; +case Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE : + rc =i2c_smbus_write_byte (psu->client,ERASE_BLACKBOX_DATA ); +if (rc <0 ) +return rc; + +break ; +case Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET : + rc =kstrtou8_from_user (buf, count,0 , &dst_data); +if (rc <0 ) +return rc; + + rc =i2c_smbus_write_byte_data (psu->client,SET_HISTORY_EVENT_OFFSET , dst_data); +if (rc <0 ) +return rc; + +break ; +default : +return -EINVAL ; + } + +return count; +} + +static const struct file_operations q54sj108a2_fops = { + .llseek = noop_llseek, + .read = q54sj108a2_debugfs_read, + .write = q54sj108a2_debugfs_write, + .open = simple_open, +}; + +static const struct i2c_device_id q54sj108a2_id[] = { + {"q54sj108a2" , q54sj108a2 }, + { }, +}; + +MODULE_DEVICE_TABLE (i2c, q54sj108a2_id); + +static int q54sj108a2_probe (struct i2c_client *client) +{ +struct device *dev = &client->dev; +u8 buf[I2C_SMBUS_BLOCK_MAX +1 ]; +enum chips chip_id; +int ret, i; +struct dentry *debugfs; +struct dentry *q54sj108a2_dir; +struct q54sj108a2_data *psu; + +if (!i2c_check_functionality (client->adapter, +I2C_FUNC_SMBUS_BYTE_DATA | +I2C_FUNC_SMBUS_WORD_DATA | +I2C_FUNC_SMBUS_BLOCK_DATA )) +return -ENODEV ; + +if (client->dev.of_node) + chip_id = (enum chips )(unsigned long )of_device_get_match_data (dev); +else + chip_id =i2c_match_id (q54sj108a2_id, client)->driver_data; + + ret =i2c_smbus_read_block_data (client,PMBUS_MFR_ID , buf); +if (ret <0 ) { +dev_err (&client->dev,"Failed to read Manufacturer ID\n" ); +return ret; + } +if (ret !=5 ||strncmp (buf,"DELTA" ,5 )) { + buf[ret] ='\0' ; +dev_err (dev,"Unsupported Manufacturer ID '%s'\n" , buf); +return -ENODEV ; + } + +/* +* The chips support reading PMBUS_MFR_MODEL. +*/ + ret =i2c_smbus_read_block_data (client,PMBUS_MFR_MODEL , buf); +if (ret <0 ) { +dev_err (dev,"Failed to read Manufacturer Model\n" ); +return ret; + } +if (ret !=14 ||strncmp (buf,"Q54SJ108A2" ,10 )) { + buf[ret] ='\0' ; +dev_err (dev,"Unsupported Manufacturer Model '%s'\n" , buf); +return -ENODEV ; + } + + ret =i2c_smbus_read_block_data (client,PMBUS_MFR_REVISION , buf); +if (ret <0 ) { +dev_err (dev,"Failed to read Manufacturer Revision\n" ); +return ret; + } +if (ret !=4 || buf[0 ] !='S' ) { + buf[ret] ='\0' ; +dev_err (dev,"Unsupported Manufacturer Revision '%s'\n" , buf); +return -ENODEV ; + } + + ret =pmbus_do_probe (client, &q54sj108a2_info[chip_id]); +if (ret) +return ret; + + psu =devm_kzalloc (&client->dev,sizeof (*psu),GFP_KERNEL ); +if (!psu) +return 0 ; + + psu->client = client; + + debugfs =pmbus_get_debugfs_dir (client); + + q54sj108a2_dir =debugfs_create_dir (client->name, debugfs); + +for (i =0 ; i <Q54SJ108A2_DEBUGFS_NUM_ENTRIES ; ++i) + psu->debugfs_entries[i] = i; + +debugfs_create_file ("operation" ,0644 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_OPERATION ], + &q54sj108a2_fops); +debugfs_create_file ("clear_fault" ,0200 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_CLEARFAULT ], + &q54sj108a2_fops); +debugfs_create_file ("write_protect" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_WRITEPROTECT ], + &q54sj108a2_fops); +debugfs_create_file ("store_default" ,0200 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_STOREDEFAULT ], + &q54sj108a2_fops); +debugfs_create_file ("vo_ov_response" ,0644 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_VOOV_RESPONSE ], + &q54sj108a2_fops); +debugfs_create_file ("io_oc_response" ,0644 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_IOOC_RESPONSE ], + &q54sj108a2_fops); +debugfs_create_file ("pmbus_revision" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_PMBUS_VERSION ], + &q54sj108a2_fops); +debugfs_create_file ("mfr_id" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_ID ], + &q54sj108a2_fops); +debugfs_create_file ("mfr_model" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_MODEL ], + &q54sj108a2_fops); +debugfs_create_file ("mfr_revision" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_REVISION ], + &q54sj108a2_fops); +debugfs_create_file ("mfr_location" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_LOCATION ], + &q54sj108a2_fops); +debugfs_create_file ("blackbox_erase" ,0200 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE ], + &q54sj108a2_fops); +debugfs_create_file ("blackbox_read_offset" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET ], + &q54sj108a2_fops); +debugfs_create_file ("blackbox_set_offset" ,0200 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET ], + &q54sj108a2_fops); +debugfs_create_file ("blackbox_read" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_READ ], + &q54sj108a2_fops); +debugfs_create_file ("flash_key" ,0444 , q54sj108a2_dir, + &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_FLASH_KEY ], + &q54sj108a2_fops); + +return 0 ; +} + +static const struct of_device_id q54sj108a2_of_match[] = { + { .compatible ="delta,q54sj108a2" , .data = (void *)q54sj108a2 }, + { }, +}; + +MODULE_DEVICE_TABLE (of, q54sj108a2_of_match); + +static struct i2c_driver q54sj108a2_driver = { + .driver = { + .name ="q54sj108a2" , + .of_match_table = q54sj108a2_of_match, + }, + .probe_new = q54sj108a2_probe, + .id_table = q54sj108a2_id, +}; + +module_i2c_driver (q54sj108a2_driver); + +MODULE_AUTHOR ("Xiao.Ma <[email protected]>" ); +MODULE_DESCRIPTION ("PMBus driver for Delta Q54SJ108A2 series modules" ); +MODULE_LICENSE ("GPL" );