powerpc: add security.config, enforcing lockdown=integrity
PATCH 1/1 powerpc: add security.config, enforcing lockdown=integrity
It's sometimes handy to have a config that boots a bit like a system under secure boot (forcing lockdown=integrity, without needing any extra stuff like a command line option).
This config file allows that, and also turns on a few assorted security and hardening options for good measure.
Suggested-by Michael Ellerman <[email protected]>
Signed-off-by Daniel Axtens <[email protected]>
--- arch/powerpc/configs/security.config | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 arch/powerpc/configs/security.config
arch/powerpc/configs/security.config new file +15 -0
@@ -0,0 +1,15 @@ +# This is the equivalent of booting with lockdown=integrity +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_LOCKDOWN_LSM=y +CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y +CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY=y + +# These are some general, reasonably inexpensive hardening options +CONFIG_HARDENED_USERCOPY=y +CONFIG_FORTIFY_SOURCE=y +CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y + +# UBSAN bounds checking is very cheap and good for hardening +CONFIG_UBSAN=y +# CONFIG_UBSAN_MISC is not set
Signature · 1 line
2.25.1
Michael Ellerman
AppliedQuoted 6 lines · Daniel Axtens
It's sometimes handy to have a config that boots a bit like a system under secure boot (forcing lockdown=integrity, without needing any extra stuff like a command line option).
This config file allows that, and also turns on a few assorted security and hardening options for good measure.
Applied to powerpc/next.
[1/1] powerpc: add security.config, enforcing lockdown=integrity
https://git.kernel.org/powerpc/c/ed2bbd2b8581313ca18a7c586a947f6cdd93a52a
cheers