Skip to contentSkip to conversation

x86: edison: Use dwc3-generic driver for Intel Edison

PATCH Superseded Andy Shevchenko 2 participants 3 messages Dec 3, 2020

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 x86: edison: Use dwc3-generic driver for Intel Edison

Use generic Synopsys DesignWare 3 driver on Intel Edison. For now it's just a stub which allows future refactoring.

---
 arch/x86/cpu/tangier/Kconfig    | 3 +++
 arch/x86/dts/edison.dts         | 4 ++++
 drivers/usb/dwc3/dwc3-generic.c | 1 +
 3 files changed, 8 insertions(+)
arch/x86/cpu/tangier/Kconfig +3 -0
index d2b7edecd604..94d9d74a325c 100644
@@ -10,8 +10,11 @@ config INTEL_TANGIER
 	imply MMC_SDHCI
 	imply MMC_SDHCI_SDMA
 	imply MMC_SDHCI_TANGIER
+	imply MISC
 	imply USB
+	imply USB_XHCI_HCD
 	imply USB_DWC3
+	imply USB_DWC3_GENERIC
 
 if INTEL_TANGIER
 
arch/x86/dts/edison.dts +4 -0
index 97cc6ec386c2..600d6d256246 100644
@@ -105,6 +105,10 @@
 		reg = <0xff009000 0x1000>;
 	};
 
+	usb: usb at f9100000 {
+		compatible = "intel,tangier-dwc3";
+	};
+
 	watchdog: wdt at 0 {
 		compatible = "intel,tangier-wdt";
 	};
drivers/usb/dwc3/dwc3-generic.c +1 -0
index a936f71d2e5d..222358d39593 100644
@@ -449,6 +449,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "rockchip,rk3328-dwc3" },
 	{ .compatible = "rockchip,rk3399-dwc3" },
 	{ .compatible = "qcom,dwc3" },
+	{ .compatible = "intel,tangier-dwc3" },
 	{ }
 };
 
Signature · 1 line
2.29.2
#1 lore raw

PATCH 2/2 x86: edison: Switch to DM_USB_GADGET

DM is the modern default approach for the drivers in U-Boot. It also allows to configure code via Device Tree.

Move Intel Edison to use DM_USB_GADGET and drop hard coded values.

---
 arch/x86/dts/edison.dts     |  8 ++++++++
 board/intel/edison/edison.c | 35 -----------------------------------
 configs/edison_defconfig    |  1 +
 3 files changed, 9 insertions(+), 35 deletions(-)
arch/x86/dts/edison.dts +8 -0
index 600d6d256246..8d245bffc2f3 100644
@@ -107,6 +107,14 @@
 
 	usb: usb at f9100000 {
 		compatible = "intel,tangier-dwc3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		dwc3: dwc3 {
+			reg = <0xf9100000 0x100000>;
+			maximum-speed = "high-speed";
+			dr_mode = "peripheral";
+		};
 	};
 
 	watchdog: wdt at 0 {
board/intel/edison/edison.c +0 -35
index 652f9755155f..11e7f74e47cc 100644
@@ -3,15 +3,10 @@
  * Copyright (c) 2017 Intel Corporation
  */
 #include <common.h>
-#include <dwc3-uboot.h>
 #include <env.h>
 #include <init.h>
 #include <mmc.h>
 #include <u-boot/md5.h>
-#include <usb.h>
-#include <watchdog.h>
-
-#include <linux/usb/gadget.h>
 
 #include <asm/cache.h>
 #include <asm/pmu.h>
@@ -27,36 +22,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-static struct dwc3_device dwc3_device_data = {
-	.maximum_speed = USB_SPEED_HIGH,
-	.base = CONFIG_SYS_USB_OTG_BASE,
-	.dr_mode = USB_DR_MODE_PERIPHERAL,
-	.index = 0,
-};
-
-int usb_gadget_handle_interrupts(int controller_index)
-{
-	dwc3_uboot_handle_interrupt(controller_index);
-	WATCHDOG_RESET();
-	return 0;
-}
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	if (index == 0 && init == USB_INIT_DEVICE)
-		return dwc3_uboot_init(&dwc3_device_data);
-	return -EINVAL;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	if (index == 0 && init == USB_INIT_DEVICE) {
-		dwc3_uboot_exit(index);
-		return 0;
-	}
-	return -EINVAL;
-}
-
 static void assign_serial(void)
 {
 	struct mmc *mmc = find_mmc_device(0);
configs/edison_defconfig +1 -0
index ab2811eca9dc..304a172a1b9f 100644
@@ -37,6 +37,7 @@ CONFIG_DFU_TIMEOUT=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Intel"
 CONFIG_USB_GADGET_VENDOR_NUM=0x8087
Signature · 1 line
2.29.2
#2 lore raw

PATCH 2/2 x86: edison: Switch to DM_USB_GADGET

Quoted 5 lines · Andy Shevchenko

DM is the modern default approach for the drivers in U-Boot. It also allows to configure code via Device Tree.

Move Intel Edison to use DM_USB_GADGET and drop hard coded values.

Missed one more file to be slightly cleaned up.

I'll send v2 soon.

Signature · 2 lines
With Best Regards,
Andy Shevchenko