Skip to contentSkip to conversation

remove obsolete option CONFIG_JFFS2_CMDLINE

PATCH New Holger Brunck 3 participants 3 messages Nov 5, 2020 – Dec 3, 2020 Arm STM32

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 remove obsolete option CONFIG_JFFS2_CMDLINE

This option is obsolete since 2009 and can be removed globally.

---
 include/configs/ethernut5.h     | 1 -
 include/configs/km/km-powerpc.h | 2 --
 include/configs/kmp204x.h       | 3 ---
 include/configs/pm9263.h        | 1 -
 include/configs/stmark2.h       | 1 -
 scripts/config_whitelist.txt    | 1 -
 6 files changed, 9 deletions(-)
include/configs/ethernut5.h +0 -1
index b513b4bc68..ca249d9d2b 100644
@@ -62,7 +62,6 @@
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif
 
include/configs/km/km-powerpc.h +0 -2
index 7bfe12fecb..3be926c103 100644
@@ -9,8 +9,6 @@
 
 /* Do boardspecific init for all boards */
 
-#define CONFIG_JFFS2_CMDLINE
-
 /* EEprom support 24C08, 24C16, 24C64 */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3  /* 8 Byte write page */
include/configs/kmp204x.h +0 -3
index ec1254e747..d1eb7b574b 100644
@@ -337,9 +337,6 @@ int get_scl(void);
  * additionnal command line configuration.
  */
 
-/* we don't need flash support */
-#undef CONFIG_JFFS2_CMDLINE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is
include/configs/pm9263.h +0 -1
index 0ed4b1aaa2..6c882b6ff9 100644
@@ -190,7 +190,6 @@
 
 #endif
 
-#define CONFIG_JFFS2_CMDLINE		1
 #define CONFIG_JFFS2_NAND		1
 #define CONFIG_JFFS2_DEV		"nand0" /* NAND device jffs2 lives on */
 #define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
include/configs/stmark2.h +0 -1
index d9a2f75e73..da162cbb11 100644
@@ -49,7 +49,6 @@
 #define CONFIG_SYS_MCFRRTC_BASE		0xFC0A8000
 
 /* spi not partitions */
-#define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_DEV		"nor0"
 
 /* Timer */
scripts/config_whitelist.txt +0 -1
index a9508448d4..be3a4b3e9a 100644
@@ -848,7 +848,6 @@ CONFIG_IRAM_STACK
 CONFIG_IRAM_TOP
 CONFIG_IRDA_BASE
 CONFIG_IS_ENABLED
-CONFIG_JFFS2_CMDLINE
 CONFIG_JFFS2_DEV
 CONFIG_JFFS2_LZO
 CONFIG_JFFS2_NAND
Signature · 1 line
2.26.0
#1 lore raw

PATCH 1/1 remove obsolete option CONFIG_JFFS2_CMDLINE

Quoted 4 lines · Holger Brunck

This option is obsolete since 2009 and can be removed globally.

Thanks,
Stefan

Quoted 78 lines
---
  include/configs/ethernut5.h     | 1 -
  include/configs/km/km-powerpc.h | 2 --
  include/configs/kmp204x.h       | 3 ---
  include/configs/pm9263.h        | 1 -
  include/configs/stmark2.h       | 1 -
  scripts/config_whitelist.txt    | 1 -
  6 files changed, 9 deletions(-)
include/configs/ethernut5.h +0 -1
index b513b4bc68..ca249d9d2b 100644
@@ -62,7 +62,6 @@
 
  /* JFFS2 */
  #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
  #define CONFIG_JFFS2_NAND
  #endif
 
include/configs/km/km-powerpc.h +0 -2
index 7bfe12fecb..3be926c103 100644
@@ -9,8 +9,6 @@
 
  /* Do boardspecific init for all boards */
 
-#define CONFIG_JFFS2_CMDLINE
-
  /* EEprom support 24C08, 24C16, 24C64 */
  #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
  #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3  /* 8 Byte write page */
include/configs/kmp204x.h +0 -3
index ec1254e747..d1eb7b574b 100644
@@ -337,9 +337,6 @@ int get_scl(void);
   * additionnal command line configuration.
   */
 
-/* we don't need flash support */
-#undef CONFIG_JFFS2_CMDLINE
-
  /*
   * For booting Linux, the board info and command line data
   * have to be in the first 64 MB of memory, since this is
include/configs/pm9263.h +0 -1
index 0ed4b1aaa2..6c882b6ff9 100644
@@ -190,7 +190,6 @@
 
  #endif
 
-#define CONFIG_JFFS2_CMDLINE		1
  #define CONFIG_JFFS2_NAND		1
  #define CONFIG_JFFS2_DEV		"nand0" /* NAND device jffs2 lives on */
  #define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
include/configs/stmark2.h +0 -1
index d9a2f75e73..da162cbb11 100644
@@ -49,7 +49,6 @@
  #define CONFIG_SYS_MCFRRTC_BASE		0xFC0A8000
 
  /* spi not partitions */
-#define CONFIG_JFFS2_CMDLINE
  #define CONFIG_JFFS2_DEV		"nor0"
 
  /* Timer */
scripts/config_whitelist.txt +0 -0
index a9508448d4..be3a4b3e9a 100644

scripts/config_whitelist.txt CONFIG_IRAM_STACK · line 853

Quoted 7 lines
scripts/config_whitelist.txt +0 -1
@@ -848,7 +848,6 @@ CONFIG_IRAM_STACK
  CONFIG_IRAM_TOP
  CONFIG_IRDA_BASE
  CONFIG_IS_ENABLED
-CONFIG_JFFS2_CMDLINE
  CONFIG_JFFS2_DEV
  CONFIG_JFFS2_LZO
  CONFIG_JFFS2_NAND

Viele Gr??e,
Stefan

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
#2 lore raw

PATCH 1/1 remove obsolete option CONFIG_JFFS2_CMDLINE

In reply to Holger Brunck
Quoted 5 lines · Holger Brunck

This option is obsolete since 2009 and can be removed globally.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201203/70d1618a/attachment.sig>