rtw88: declare hw supports ch 144
Ping-Ke Shih
maintainerPATCH 1/1 rtw88: declare hw supports ch 144
From: Zong-Zhe Yang <[email protected]>
When driver was developed, FCC regulation didn't enable channel 144 and there was no demand for channel 144 at that time. Although HW actually supports channel 144, driver didn't announce channel 144. Therefore, channel 144 (20 MHz), channel 142 (40 MHz) and channel 138 (80 MHz) couldn't be used.
Today, channel 144 has been enabled by regulations and is gradually being supported. With test requirements, we declare hw supports channel 144.
--- drivers/net/wireless/realtek/rtw88/main.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/realtek/rtw88/main.c +1 -0
@@ -67,6 +67,7 @@ static struct ieee80211_channel rtw_channeltable_5g[] = { {.center_freq = 5660, .hw_value = 132,}, {.center_freq = 5680, .hw_value = 136,}, {.center_freq = 5700, .hw_value = 140,}, + {.center_freq = 5720, .hw_value = 144,}, {.center_freq = 5745, .hw_value = 149,}, {.center_freq = 5765, .hw_value = 153,}, {.center_freq = 5785, .hw_value = 157,},
Signature · 1 line
2.21.0
Quoted 8 lines · Ping-Ke Shih
From: Zong-Zhe Yang <[email protected]>
When driver was developed, FCC regulation didn't enable channel 144 and there was no demand for channel 144 at that time. Although HW actually supports channel 144, driver didn't announce channel 144. Therefore, channel 144 (20 MHz), channel 142 (40 MHz) and channel 138 (80 MHz) couldn't be used.
Quoted 6 lines
Today, channel 144 has been enabled by regulations and is gradually being supported. With test requirements, we declare hw supports channel 144.
Signed-off-by Zong-Zhe Yang <[email protected]>Signed-off-by Ping-Ke Shih <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
5e38884152ba rtw88: declare hw supports ch 144
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches