Skip to contentSkip to conversation

PCI/PM: Do not generate wakeup event when runtime resuming bus

PATCH In review Mika Westerberg 2 participants 3 messages Nov 25, 2020 – Dec 4, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 PCI/PM: Do not generate wakeup event when runtime resuming bus

When a PCI bridge is runtime resumed from D3cold the underlying bus is walked and the attached devices are runtime resumed as well. However, in addition to that we also generate a wakeup event for these devices even though this actually is not a real wakeup event coming from the hardware.

Normally this does not cause problems but when combined with /sys/power/wakeup_count like using the steps below:

# count=$(cat /sys/power/wakeup_count)

  # echo $count > /sys/power/wakeup_count
  # echo mem > /sys/power/state

The system suspend cycle might fail at this point if a PCI bridge that was runtime suspended (D3cold) was runtime resumed for any reason. The runtime resume calls pci_wakeup_bus() and that generates wakeup event increasing wakeup_count.

Since this is not a real wakeup event we can prevent the above from happening by removing the call to pci_wakeup_event() in pci_wakeup_bus().

---
Previous version can be found here:

https://www.spinics.net/lists/linux-pci/msg101083.html

Changes from the previous version:

- Split the patch in two. The second patch only does the rename.
- Tried to improve the commit message a bit
- Added Rafael's reviewed-by tag

 drivers/pci/pci.c | 1 -
 1 file changed, 1 deletion(-)
drivers/pci/pci.c +0 -1
index e578d34095e9..6f7b33998fbe 100644
@@ -1181,7 +1181,6 @@ EXPORT_SYMBOL_GPL(pci_platform_power_transition);
  */
 static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
 {
-	pci_wakeup_event(pci_dev);
 	pm_request_resume(&pci_dev->dev);
 	return 0;
 }
Signature · 1 line
2.29.2
#1 lore raw

PATCH v2 2/2 PCI: Rename pci_wakeup_bus() to pci_resume_bus()

The previous commit changed the pci_wakeup_bus() to not to signal wakeup event anymore so rename the function to better match what it does.

---
This is new patch as suggested by Bjorn. This one only does the rename. I added Rafael's tag here too as there are no other changes than the split. Let me know if it's not OK.

 drivers/gpu/vga/vga_switcheroo.c |  2 +-
 drivers/pci/pci.c                | 15 +++++----------
 include/linux/pci.h              |  2 +-
 3 files changed, 7 insertions(+), 12 deletions(-)
drivers/gpu/vga/vga_switcheroo.c +1 -1
index 087304b1a5d7..8843b078ad4e 100644
@@ -1039,7 +1039,7 @@ static int vga_switcheroo_runtime_resume(struct device *dev)
 	mutex_lock(&vgasr_mutex);
 	vga_switcheroo_power_switch(pdev, VGA_SWITCHEROO_ON);
 	mutex_unlock(&vgasr_mutex);
-	pci_wakeup_bus(pdev->bus);
+	pci_resume_bus(pdev->bus);
 	ret = dev->bus->pm->runtime_resume(dev);
 	if (ret)
 		return ret;
drivers/pci/pci.c +5 -10
index 6f7b33998fbe..0102cc973783 100644
@@ -1174,25 +1174,20 @@ int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
 }
 EXPORT_SYMBOL_GPL(pci_platform_power_transition);
 
-/**
- * pci_wakeup - Wake up a PCI device
- * @pci_dev: Device to handle.
- * @ign: ignored parameter
- */
-static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
+static int pci_resume_one(struct pci_dev *pci_dev, void *ign)
 {
 	pm_request_resume(&pci_dev->dev);
 	return 0;
 }
 
 /**
- * pci_wakeup_bus - Walk given bus and wake up devices on it
+ * pci_resume_bus - Walk given bus and runtime resume devices on it
  * @bus: Top bus of the subtree to walk.
  */
-void pci_wakeup_bus(struct pci_bus *bus)
+void pci_resume_bus(struct pci_bus *bus)
 {
 	if (bus)
-		pci_walk_bus(bus, pci_wakeup, NULL);
+		pci_walk_bus(bus, pci_resume_one, NULL);
 }
 
 static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
@@ -1255,7 +1250,7 @@ int pci_power_up(struct pci_dev *dev)
 		 * may be powered on into D0uninitialized state, resume them to
 		 * give them a chance to suspend again
 		 */
-		pci_wakeup_bus(dev->subordinate);
+		pci_resume_bus(dev->subordinate);
 	}
 
 	return pci_raw_set_power_state(dev, PCI_D0);
include/linux/pci.h +1 -1
index 22207a79762c..9256ef2e4327 100644
@@ -1271,7 +1271,7 @@ bool pci_dev_run_wake(struct pci_dev *dev);
 void pci_d3cold_enable(struct pci_dev *dev);
 void pci_d3cold_disable(struct pci_dev *dev);
 bool pcie_relaxed_ordering_enabled(struct pci_dev *dev);
-void pci_wakeup_bus(struct pci_bus *bus);
+void pci_resume_bus(struct pci_bus *bus);
 void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state);
 
 /* For use by arch with custom probe code */
Signature · 1 line
2.29.2
#2 lore raw
In reply to Mika Westerberg
Quoted 18 lines · Mika Westerberg

When a PCI bridge is runtime resumed from D3cold the underlying bus is walked and the attached devices are runtime resumed as well. However, in addition to that we also generate a wakeup event for these devices even though this actually is not a real wakeup event coming from the hardware.

Normally this does not cause problems but when combined with /sys/power/wakeup_count like using the steps below:

# count=$(cat /sys/power/wakeup_count)

  # echo $count > /sys/power/wakeup_count
  # echo mem > /sys/power/state

The system suspend cycle might fail at this point if a PCI bridge that was runtime suspended (D3cold) was runtime resumed for any reason. The runtime resume calls pci_wakeup_bus() and that generates wakeup event increasing wakeup_count.

Quoted 7 lines

Since this is not a real wakeup event we can prevent the above from happening by removing the call to pci_wakeup_event() in pci_wakeup_bus().

I reversed the order of these since I think it's more obvious that pci_wakeup_event() doesn't fit in pci_resume_one() and applied both to pci/pm for v5.11, thanks!

Quoted 29 lines

---
Previous version can be found here:

https://www.spinics.net/lists/linux-pci/msg101083.html

Changes from the previous version:

- Split the patch in two. The second patch only does the rename.
- Tried to improve the commit message a bit
- Added Rafael's reviewed-by tag

 drivers/pci/pci.c | 1 -
 1 file changed, 1 deletion(-)
drivers/pci/pci.c +0 -1
index e578d34095e9..6f7b33998fbe 100644
@@ -1181,7 +1181,6 @@ EXPORT_SYMBOL_GPL(pci_platform_power_transition);
  */
 static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
 {
-	pci_wakeup_event(pci_dev);
 	pm_request_resume(&pci_dev->dev);
 	return 0;
 }
Signature · 1 line
2.29.2