ARM: dts: armada-385-linksys: fix usage with newer devices
PATCH 1/1 ARM: dts: armada-385-linksys: fix usage with newer devices
Newer Linksys boards might come with a Winbond W29N02GV which can be configured in different ways. Make sure we configure it the same way as the older chips so everything keeps working.
Signed-off-by Imre Kaloz <[email protected]>
Signed-off-by Rosen Penev <[email protected]>
--- arch/arm/boot/dts/armada-385-linksys.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/armada-385-linksys.dtsi +2 -0
@@ -148,6 +148,8 @@ nand: nand@0 { reg = <0>; label = "pxa3xx_nand-0"; nand-rb = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; marvell,nand-keep-config; nand-on-flash-bbt; };
Signature · 7 lines
2.28.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Rosen,
Quoted 6 lines
Newer Linksys boards might come with a Winbond W29N02GV which can be configured in different ways. Make sure we configure it the same way as the older chips so everything keeps working.
Signed-off-by Imre Kaloz <[email protected]>Signed-off-by Rosen Penev <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 20 lines
--- arch/arm/boot/dts/armada-385-linksys.dtsi | 2 ++ 1 file changed, 2 insertions(+)arch/arm/boot/dts/armada-385-linksys.dtsi +2
-0@@ -148,6 +148,8 @@ nand: nand@0 { reg = <0>; label = "pxa3xx_nand-0"; nand-rb = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; marvell,nand-keep-config; nand-on-flash-bbt; };Signature · 1 line
2.28.0
Signature · 8 lines
Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel