add custom hinge sensor support
Subsystems (3)
Here three separate iio devices are presented which presents angle for hinge, keyboard and screen.
This driver works on devices with Intel integrated sensor hub, where hinge sensor is presented using a custom sensor usage id.
Here the angle is presented in degrees, which is converted to radians.
Changes since v2:
- use 1 iio device instead of 3 for hinge sensor.
- use indexed channel instead of modified channel and added channel labels.
- remove 2,3 patch in last version, add a document patch to describe the hinge channels.
- hid-sensor-custom: use meaningful return value in get_known_custom_sensor_index and checked in call side.
- hid-sensor-ids.h: use HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(x) to define custom sensor value.
Changes since v1:
- fixed errors reported by lkp
Ye Xiang (3):
HID: hid-sensor-custom: Add custom sensor iio support
iio: hid-sensors: Add hinge sensor driver iio:Documentation: Add documentation for hinge sensor channels
Documentation/ABI/testing/sysfs-bus-iio | 17 + drivers/hid/hid-sensor-custom.c | 181 ++++++++ .../hid-sensors/hid-sensor-attributes.c | 2 + drivers/iio/position/Kconfig | 16 + drivers/iio/position/Makefile | 1 + .../position/hid-sensor-custom-intel-hinge.c | 393 ++++++++++++++++++ include/linux/hid-sensor-ids.h | 14 + 7 files changed, 624 insertions(+) create mode 100644 drivers/iio/position/hid-sensor-custom-intel-hinge.c
Signature · 1 line
2.17.1
PATCH v3 1/3 HID: hid-sensor-custom: Add custom sensor iio support
Currently custom sensors properties are not decoded and it is up to user space to interpret.
Some manufacturers already standardized the meaning of some custom sensors. They can be presented as a proper IIO sensor. We can identify these sensors based on manufacturer and serial number property in the report.
This change is identifying hinge sensor when the manufacturer is "INTEL". This creates a platform device so that a sensor driver can be loaded to process these sensors.
--- drivers/hid/hid-sensor-custom.c | 181 ++++++++++++++++++++++++++++++++ include/linux/hid-sensor-ids.h | 14 +++ 2 files changed, 195 insertions(+)
drivers/hid/hid-sensor-custom.c +181 -0
@@ -4,6 +4,7 @@* Copyright (c) 2015, Intel Corporation. */ +#include <linux/ctype.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h>
@@ -21,6 +22,7 @@#define HID_CUSTOM_TOTAL_ATTRS (HID_CUSTOM_MAX_CORE_ATTRS + 1)#define HID_CUSTOM_FIFO_SIZE 4096#define HID_CUSTOM_MAX_FEATURE_BYTES 64 +#define HID_SENSOR_USAGE_LENGTH (4 + 1)struct hid_sensor_custom_field {int report_id;
@@ -50,6 +52,8 @@ struct hid_sensor_custom {struct kfifo data_fifo;unsigned long misc_opened;wait_queue_head_t wait; +struct platform_device *custom_pdev; +bool custom_pdev_exposed; };/* Header for each sample to user space via dev interface */
@@ -746,11 +750,164 @@ static void hid_sensor_custom_dev_if_remove(struct hid_sensor_custom } +/* +* use sensors luid which is defined in FW, such as ISH, +* to identify sensor. +*/ +static const char *const known_sensor_luid[] = {"020B000000000000" }; + +static int get_luid_table_index (unsigned char *usage_str) +{ +int i; + +for (i =0 ; i <ARRAY_SIZE (known_sensor_luid); i++) { +if (!strncmp (usage_str, known_sensor_luid[i], +strlen (known_sensor_luid[i]))) +return i; + } + +return -1 ; +} + +static int get_known_custom_sensor_index (struct hid_sensor_hub_device *hsdev) +{ +struct hid_sensor_hub_attribute_info sensor_manufacturer = {0 }; +struct hid_sensor_hub_attribute_info sensor_luid_info = {0 }; +int report_size; +int ret; +u16 *w_buf; +char *buf; +int w_buf_len =sizeof (u16) *HID_CUSTOM_MAX_FEATURE_BYTES ; +int buf_len =sizeof (char ) *HID_CUSTOM_MAX_FEATURE_BYTES ; +int i; +int index; + + w_buf =kzalloc (w_buf_len,GFP_KERNEL ); +if (!w_buf) { + ret = -ENOMEM ; + goto error_out2; + } + + buf =kzalloc (buf_len,GFP_KERNEL ); +if (!buf) { + ret = -ENOMEM ; + goto error_out1; + } +/* get manufacturer info */ + ret =sensor_hub_input_get_attribute_info ( + hsdev,HID_FEATURE_REPORT , hsdev->usage, +HID_USAGE_SENSOR_PROP_MANUFACTURER , &sensor_manufacturer); +if (ret <0 ) { + ret = -ENODEV ; + goto error_out; + } + + report_size = +sensor_hub_get_feature (hsdev, sensor_manufacturer.report_id, + sensor_manufacturer.index, w_buf_len, + w_buf); +if (report_size <=0 ) { +hid_err (hsdev->hdev, +"Failed to get sensor manufacturer info %d\n" , + report_size); + ret = -ENODEV ; + goto error_out; + } + +/* convert from wide char to char */ +for (i =0 ; i < buf_len -1 && w_buf[i]; i++) + buf[i] = (char )w_buf[i]; + +/* ensure it's ISH sensor */ +if (strncmp (buf,"INTEL" ,strlen ("INTEL" ))) { + ret = -ENODEV ; + goto error_out; + } + +memset (w_buf,0 , w_buf_len); +memset (buf,0 , buf_len); + +/* get real usage id */ + ret =sensor_hub_input_get_attribute_info ( + hsdev,HID_FEATURE_REPORT , hsdev->usage, +HID_USAGE_SENSOR_PROP_SERIAL_NUM , &sensor_luid_info); +if (ret <0 ) { + ret = -ENODEV ; + goto error_out; + } + + report_size =sensor_hub_get_feature (hsdev, sensor_luid_info.report_id, + sensor_luid_info.index, w_buf_len, + w_buf); +if (report_size <=0 ) { +hid_err (hsdev->hdev,"Failed to get real usage info %d\n" , + report_size); + ret = -ENODEV ; + goto error_out; + } + +/* convert from wide char to char */ +for (i =0 ; i < buf_len -1 && w_buf[i]; i++) + buf[i] = (char )w_buf[i]; + +if (strlen (buf) !=strlen (known_sensor_luid[0 ]) +5 ) { +hid_err (hsdev->hdev, +"%s luid length not match %zu != (%zu + 5)\n" , __func__, +strlen (buf),strlen (known_sensor_luid[0 ])); + ret = -ENODEV ; + goto error_out; + } + +/* get table index with luid (not matching 'LUID: ' in luid) */ + index =get_luid_table_index (&buf[5 ]); +if (index >=0 ) + ret = index; +else + ret = -ENODEV ; + +error_out: +kfree (buf); +error_out1: +kfree (w_buf); +error_out2: +return ret; +} + +static struct platform_device * +hid_sensor_register_platform_device (struct platform_device *pdev, +struct hid_sensor_hub_device *hsdev, +int index) +{ +char real_usage[HID_SENSOR_USAGE_LENGTH ] = {0 }; +struct platform_device *custom_pdev; +const char *dev_name; +char *c; + +/* copy real usage id */ +memcpy (real_usage, known_sensor_luid[index],4 ); + +/* usage id are all lowcase */ +for (c = real_usage; *c !='\0' ; c++) + *c =tolower (*c); + +/* HID-SENSOR-INT-REAL_USAGE_ID */ + dev_name =kasprintf (GFP_KERNEL ,"HID-SENSOR-INT-%s" , real_usage); +if (!dev_name) +return NULL ; + + custom_pdev =platform_device_register_data (pdev->dev.parent, dev_name, +PLATFORM_DEVID_NONE , hsdev, +sizeof (*hsdev)); +kfree (dev_name); +return custom_pdev; +} +static int hid_sensor_custom_probe (struct platform_device *pdev) {struct hid_sensor_custom *sensor_inst;struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;int ret; +int index; sensor_inst =devm_kzalloc (&pdev->dev,sizeof (*sensor_inst),GFP_KERNEL );
@@ -764,6 +921,25 @@ static int hid_sensor_custom_probe(struct platform_device *pdev) sensor_inst->pdev = pdev;mutex_init (&sensor_inst->mutex);platform_set_drvdata (pdev, sensor_inst); + + index =get_known_custom_sensor_index (hsdev); +if (index >=0 && index <ARRAY_SIZE (known_sensor_luid)) { + sensor_inst->custom_pdev = +hid_sensor_register_platform_device (pdev, hsdev, index); + + ret =PTR_ERR_OR_ZERO (sensor_inst->custom_pdev); +if (ret) { +dev_err (&pdev->dev, +"register_platform_device failed\n" ); +return ret; + } + + sensor_inst->custom_pdev_exposed = true; +return 0 ; + }else if (index <0 && index != -ENODEV ) { +return index; + } + ret =sensor_hub_register_callback (hsdev, hsdev->usage, &sensor_inst->callbacks);if (ret <0 ) {
@@ -802,6 +978,11 @@ static int hid_sensor_custom_remove(struct platform_device *pdev)struct hid_sensor_custom *sensor_inst =platform_get_drvdata (pdev);struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; +if (sensor_inst->custom_pdev_exposed) { +platform_device_unregister (sensor_inst->custom_pdev); +return 0 ; + } +hid_sensor_custom_dev_if_remove (sensor_inst);hid_sensor_custom_remove_attributes (sensor_inst); sysfs_remove_group(&sensor_inst->pdev->dev.kobj,
include/linux/hid-sensor-ids.h +14 -0
@@ -128,6 +128,10 @@#define HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND 0x15/* Common selectors */ +#define HID_USAGE_SENSOR_PROP_DESC 0x200300 +#define HID_USAGE_SENSOR_PROP_FRIENDLY_NAME 0x200301 +#define HID_USAGE_SENSOR_PROP_SERIAL_NUM 0x200307 +#define HID_USAGE_SENSOR_PROP_MANUFACTURER 0x200305#define HID_USAGE_SENSOR_PROP_REPORT_INTERVAL 0x20030E#define HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS 0x20030F#define HID_USAGE_SENSOR_PROP_SENSITIVITY_RANGE_PCT 0x200310
@@ -159,4 +163,14 @@#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x200840#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x200841 +/* Custom Sensor (2000e1) */ +#define HID_USAGE_SENSOR_HINGE 0x20020B +#define HID_USAGE_SENSOR_DATA_FIELD_LOCATION 0x200400 +#define HID_USAGE_SENSOR_DATA_FIELE_TIME_SINCE_SYS_BOOT 0x20052B +#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_USAGE 0x200541 +#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE_BASE 0x200543 +/* Custom Sensor data 28=>x>=0 */ +#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (x) \ + (HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE_BASE + (x)) +#endif
Signature · 1 line
2.17.1
Jonathan Cameron
maintainerRe: [PATCH v3 1/3] HID: hid-sensor-custom: Add custom sensor iio support
Quoted 7 lines · On Thu, 3 Dec 2020 11:53:50 +0800 Ye Xiang <[email protected]> wrote:
Currently custom sensors properties are not decoded and it is up to user space to interpret.
Some manufacturers already standardized the meaning of some custom sensors. They can be presented as a proper IIO sensor. We can identify these sensors based on manufacturer and serial number property in the report.
Quoted 5 lines
This change is identifying hinge sensor when the manufacturer is "INTEL". This creates a platform device so that a sensor driver can be loaded to process these sensors.
Signed-off-by Ye Xiang <[email protected]>
Hi,
A few little comments inline.
Others are much more familiar with this code than I am though so I'm sure they will give a more in depth review!
Quoted 26 lines
--- drivers/hid/hid-sensor-custom.c | 181 ++++++++++++++++++++++++++++++++ include/linux/hid-sensor-ids.h | 14 +++ 2 files changed, 195 insertions(+)drivers/hid/hid-sensor-custom.c +2
-0@@ -4,6 +4,7 @@* Copyright (c) 2015, Intel Corporation. */ +#include <linux/ctype.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -21,6 +22,7 @@#define HID_CUSTOM_TOTAL_ATTRS (HID_CUSTOM_MAX_CORE_ATTRS + 1)#define HID_CUSTOM_FIFO_SIZE 4096#define HID_CUSTOM_MAX_FEATURE_BYTES 64 +#define HID_SENSOR_USAGE_LENGTH (4 + 1)struct hid_sensor_custom_field {int report_id;
drivers/hid/hid-sensor-custom.c struct hid_sensor_custom { · line 56
Quoted 5 lines
drivers/hid/hid-sensor-custom.c +2
-0@@ -50,6 +52,8 @@ struct hid_sensor_custom {struct kfifo data_fifo;unsigned long misc_opened;wait_queue_head_t wait; +struct platform_device *custom_pdev; +bool custom_pdev_exposed;
Note on this below. I'm not sure the boolean brings us any advantages.
drivers/hid/hid-sensor-custom.c static void hid_sensor_custom_dev_if_remove(struct hid_sensor_custom · line 755
Quoted 10 lines
drivers/hid/hid-sensor-custom.c +3
-0};/* Header for each sample to user space via dev interface */ @@ -746,11 +750,164 @@ static void hid_sensor_custom_dev_if_remove(struct hid_sensor_custom } +/* +* use sensors luid which is defined in FW, such as ISH, +* to identify sensor.
Perhaps rephrase as
luid defined in FW (e.g. ISH). May be used to identify sensor.
Quoted 166 lines
drivers/hid/hid-sensor-custom.c +154
-0+*/ +static const char *const known_sensor_luid[] = {"020B000000000000" }; + +static int get_luid_table_index (unsigned char *usage_str) +{ +int i; + +for (i =0 ; i <ARRAY_SIZE (known_sensor_luid); i++) { +if (!strncmp (usage_str, known_sensor_luid[i], +strlen (known_sensor_luid[i]))) +return i; + } + +return -1 ; +} + +static int get_known_custom_sensor_index (struct hid_sensor_hub_device *hsdev) +{ +struct hid_sensor_hub_attribute_info sensor_manufacturer = {0 }; +struct hid_sensor_hub_attribute_info sensor_luid_info = {0 }; +int report_size; +int ret; +u16 *w_buf; +char *buf; +int w_buf_len =sizeof (u16) *HID_CUSTOM_MAX_FEATURE_BYTES ; +int buf_len =sizeof (char ) *HID_CUSTOM_MAX_FEATURE_BYTES ; +int i; +int index; + + w_buf =kzalloc (w_buf_len,GFP_KERNEL ); +if (!w_buf) { + ret = -ENOMEM ; + goto error_out2; + } + + buf =kzalloc (buf_len,GFP_KERNEL ); +if (!buf) { + ret = -ENOMEM ; + goto error_out1; + } +/* get manufacturer info */ + ret =sensor_hub_input_get_attribute_info ( + hsdev,HID_FEATURE_REPORT , hsdev->usage, +HID_USAGE_SENSOR_PROP_MANUFACTURER , &sensor_manufacturer); +if (ret <0 ) { + ret = -ENODEV ; + goto error_out; + } + + report_size = +sensor_hub_get_feature (hsdev, sensor_manufacturer.report_id, + sensor_manufacturer.index, w_buf_len, + w_buf); +if (report_size <=0 ) { +hid_err (hsdev->hdev, +"Failed to get sensor manufacturer info %d\n" , + report_size); + ret = -ENODEV ; + goto error_out; + } + +/* convert from wide char to char */ +for (i =0 ; i < buf_len -1 && w_buf[i]; i++) + buf[i] = (char )w_buf[i]; + +/* ensure it's ISH sensor */ +if (strncmp (buf,"INTEL" ,strlen ("INTEL" ))) { + ret = -ENODEV ; + goto error_out; + } + +memset (w_buf,0 , w_buf_len); +memset (buf,0 , buf_len); + +/* get real usage id */ + ret =sensor_hub_input_get_attribute_info ( + hsdev,HID_FEATURE_REPORT , hsdev->usage, +HID_USAGE_SENSOR_PROP_SERIAL_NUM , &sensor_luid_info); +if (ret <0 ) { + ret = -ENODEV ; + goto error_out; + } + + report_size =sensor_hub_get_feature (hsdev, sensor_luid_info.report_id, + sensor_luid_info.index, w_buf_len, + w_buf); +if (report_size <=0 ) { +hid_err (hsdev->hdev,"Failed to get real usage info %d\n" , + report_size); + ret = -ENODEV ; + goto error_out; + } + +/* convert from wide char to char */ +for (i =0 ; i < buf_len -1 && w_buf[i]; i++) + buf[i] = (char )w_buf[i]; + +if (strlen (buf) !=strlen (known_sensor_luid[0 ]) +5 ) { +hid_err (hsdev->hdev, +"%s luid length not match %zu != (%zu + 5)\n" , __func__, +strlen (buf),strlen (known_sensor_luid[0 ])); + ret = -ENODEV ; + goto error_out; + } + +/* get table index with luid (not matching 'LUID: ' in luid) */ + index =get_luid_table_index (&buf[5 ]); +if (index >=0 ) + ret = index; +else + ret = -ENODEV ; + +error_out: +kfree (buf); +error_out1: +kfree (w_buf); +error_out2: +return ret; +} + +static struct platform_device * +hid_sensor_register_platform_device (struct platform_device *pdev, +struct hid_sensor_hub_device *hsdev, +int index) +{ +char real_usage[HID_SENSOR_USAGE_LENGTH ] = {0 }; +struct platform_device *custom_pdev; +const char *dev_name; +char *c; + +/* copy real usage id */ +memcpy (real_usage, known_sensor_luid[index],4 ); + +/* usage id are all lowcase */ +for (c = real_usage; *c !='\0' ; c++) + *c =tolower (*c); + +/* HID-SENSOR-INT-REAL_USAGE_ID */ + dev_name =kasprintf (GFP_KERNEL ,"HID-SENSOR-INT-%s" , real_usage); +if (!dev_name) +return NULL ; + + custom_pdev =platform_device_register_data (pdev->dev.parent, dev_name, +PLATFORM_DEVID_NONE , hsdev, +sizeof (*hsdev)); +kfree (dev_name); +return custom_pdev; +} +static int hid_sensor_custom_probe (struct platform_device *pdev) {struct hid_sensor_custom *sensor_inst;struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;int ret; +int index; sensor_inst =devm_kzalloc (&pdev->dev,sizeof (*sensor_inst),GFP_KERNEL );@@ -764,6 +921,25 @@ static int hid_sensor_custom_probe(struct platform_device *pdev) sensor_inst->pdev = pdev;mutex_init (&sensor_inst->mutex);platform_set_drvdata (pdev, sensor_inst); + + index =get_known_custom_sensor_index (hsdev); +if (index >=0 && index <ARRAY_SIZE (known_sensor_luid)) { + sensor_inst->custom_pdev =
drivers/hid/hid-sensor-custom.c static int hid_sensor_custom_probe(struct platform_device *pdev) · line 937
Quoted 10 lines
drivers/hid/hid-sensor-custom.c +10
-0+hid_sensor_register_platform_device (pdev, hsdev, index); + + ret =PTR_ERR_OR_ZERO (sensor_inst->custom_pdev); +if (ret) { +dev_err (&pdev->dev, +"register_platform_device failed\n" ); +return ret; + } + + sensor_inst->custom_pdev_exposed = true;
Do we need an additional boolean or can we just use the existence of custom_pdev?
Quoted 50 lines
drivers/hid/hid-sensor-custom.c +10
-0+return 0 ; + }else if (index <0 && index != -ENODEV ) { +return index; + } + ret =sensor_hub_register_callback (hsdev, hsdev->usage, &sensor_inst->callbacks);if (ret <0 ) {@@ -802,6 +978,11 @@ static int hid_sensor_custom_remove(struct platform_device *pdev)struct hid_sensor_custom *sensor_inst =platform_get_drvdata (pdev);struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; +if (sensor_inst->custom_pdev_exposed) { +platform_device_unregister (sensor_inst->custom_pdev); +return 0 ; + } +hid_sensor_custom_dev_if_remove (sensor_inst);hid_sensor_custom_remove_attributes (sensor_inst); sysfs_remove_group(&sensor_inst->pdev->dev.kobj,include/linux/hid-sensor-ids.h +14
-0@@ -128,6 +128,10 @@#define HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND 0x15/* Common selectors */ +#define HID_USAGE_SENSOR_PROP_DESC 0x200300 +#define HID_USAGE_SENSOR_PROP_FRIENDLY_NAME 0x200301 +#define HID_USAGE_SENSOR_PROP_SERIAL_NUM 0x200307 +#define HID_USAGE_SENSOR_PROP_MANUFACTURER 0x200305#define HID_USAGE_SENSOR_PROP_REPORT_INTERVAL 0x20030E#define HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS 0x20030F#define HID_USAGE_SENSOR_PROP_SENSITIVITY_RANGE_PCT 0x200310@@ -159,4 +163,14 @@#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x200840#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x200841 +/* Custom Sensor (2000e1) */ +#define HID_USAGE_SENSOR_HINGE 0x20020B +#define HID_USAGE_SENSOR_DATA_FIELD_LOCATION 0x200400 +#define HID_USAGE_SENSOR_DATA_FIELE_TIME_SINCE_SYS_BOOT 0x20052B +#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_USAGE 0x200541 +#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE_BASE 0x200543 +/* Custom Sensor data 28=>x>=0 */ +#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (x) \ + (HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE_BASE + (x)) +#endif
PATCH v3 2/3 iio: hid-sensors: Add hinge sensor driver
In reply to Ye XiangThe Hinge sensor is a common custom sensor on laptops. It calculates the angle between the lid (screen) and the base (keyboard). In addition, it also exposes screen and the keyboard angles with respect to the ground. Applications can easily get laptop's status in space through this sensor, in order to display appropriate user interface.
--- .../hid-sensors/hid-sensor-attributes.c | 2 + drivers/iio/position/Kconfig | 16 + drivers/iio/position/Makefile | 1 + .../position/hid-sensor-custom-intel-hinge.c | 393 ++++++++++++++++++ 4 files changed, 412 insertions(+) create mode 100644 drivers/iio/position/hid-sensor-custom-intel-hinge.c
drivers/iio/common/hid-sensors/hid-sensor-attributes.c +2 -0
@@ -71,6 +71,8 @@ static struct { {HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_UNITS_DEGREES, 1000, 0}, {HID_USAGE_SENSOR_HUMIDITY, 0, 1000, 0}, + {HID_USAGE_SENSOR_HINGE, 0, 0, 17453293}, + {HID_USAGE_SENSOR_HINGE, HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293}, }; static void simple_div(int dividend, int divisor, int *whole,
drivers/iio/position/Kconfig +16 -0
@@ -16,4 +16,20 @@ config IQS624_POS To compile this driver as a module, choose M here: the module will be called iqs624-pos. +config HID_SENSOR_CUSTOM_INTEL_HINGE + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Hinge" + help + This sensor present three angles, hinge angel, screen angles + and keyboard angle respect to horizon (ground). + Say yes here to build support for the HID custom + intel hinge sensor. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-custom-hinge. + endmenu
drivers/iio/position/Makefile +1 -0
@@ -4,4 +4,5 @@ # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE) += hid-sensor-custom-intel-hinge.o obj-$(CONFIG_IQS624_POS) += iqs624-pos.o
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +393 -0
393 lines not on this page · raw message
Signature · 1 line
2.17.1
Jonathan Cameron
maintainerRe: [PATCH v3 2/3] iio: hid-sensors: Add hinge sensor driver
Quoted 7 lines · On Thu, 3 Dec 2020 11:53:51 +0800 Ye Xiang <[email protected]> wrote:
The Hinge sensor is a common custom sensor on laptops. It calculates the angle between the lid (screen) and the base (keyboard). In addition, it also exposes screen and the keyboard angles with respect to the ground. Applications can easily get laptop's status in space through this sensor, in order to display appropriate user interface.
Signed-off-by Ye Xiang <[email protected]>
A few new comments inline. This is coming together nicely now.
No great rush btw as IIO is effectively closed for this cycle (merge window opens in about a week and everything needs some time in linux-next).
We should be good to line this up early in the next cycle.
Thanks,
Jonathan
Quoted 100 lines
--- .../hid-sensors/hid-sensor-attributes.c | 2 + drivers/iio/position/Kconfig | 16 + drivers/iio/position/Makefile | 1 + .../position/hid-sensor-custom-intel-hinge.c | 393 ++++++++++++++++++ 4 files changed, 412 insertions(+) create mode 100644 drivers/iio/position/hid-sensor-custom-intel-hinge.cdrivers/iio/common/hid-sensors/hid-sensor-attributes.c +2
-0@@ -71,6 +71,8 @@ static struct { {HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_UNITS_DEGREES, 1000, 0}, {HID_USAGE_SENSOR_HUMIDITY, 0, 1000, 0}, + {HID_USAGE_SENSOR_HINGE, 0, 0, 17453293}, + {HID_USAGE_SENSOR_HINGE, HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293}, }; static void simple_div(int dividend, int divisor, int *whole,drivers/iio/position/Kconfig +16
-0@@ -16,4 +16,20 @@ config IQS624_POS To compile this driver as a module, choose M here: the module will be called iqs624-pos. +config HID_SENSOR_CUSTOM_INTEL_HINGE + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Hinge" + help + This sensor present three angles, hinge angel, screen angles + and keyboard angle respect to horizon (ground). + Say yes here to build support for the HID custom + intel hinge sensor. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-custom-hinge. + endmenudrivers/iio/position/Makefile +1
-0@@ -4,4 +4,5 @@ # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE) += hid-sensor-custom-intel-hinge.o obj-$(CONFIG_IQS624_POS) += iqs624-pos.odrivers/iio/position/hid-sensor-custom-intel-hinge.c new file +38
-0@@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* HID Sensors Driver +* Copyright (c) 2020, Intel Corporation. +*/ +#include <linux/hid-sensor-hub.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/platform_device.h> + +#include "../common/hid-sensors/hid-sensor-trigger.h" + +enum hinge_channel { +CHANNEL_SCAN_INDEX_HINGE_ANGLE , +CHANNEL_SCAN_INDEX_SCREEN_ANGLE , +CHANNEL_SCAN_INDEX_KEYBOARD_ANGLE , +CHANNEL_SCAN_INDEX_MAX , +}; + +#define CHANNEL_SCAN_INDEX_TIMESTAMP CHANNEL_SCAN_INDEX_MAX + +static const u32 hinge_addresses[CHANNEL_SCAN_INDEX_MAX ] = { +HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (1 ), +HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (2 ), +HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (3 ) +}; + +struct hinge_state { +struct iio_dev *indio_dev; +struct hid_sensor_hub_attribute_info hinge[CHANNEL_SCAN_INDEX_MAX ]; +struct hid_sensor_hub_callbacks callbacks; +struct hid_sensor_common common_attributes; +const char *labels[CHANNEL_SCAN_INDEX_MAX ]; +struct { +u32 hinge_val[3 ]; +u64 timestamp__aligned(8) ; + } scan; +
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 48
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+int scale_pre_decml; +int scale_post_decml; +int scale_precision; +int value_offset; +u64 timestamp; +}; + +/* Channel definitions */ +static const struct iio_chan_spec hinge_channels[] = { + { .type =IIO_ANGL ,
Probably better to indent this a bit more (and don't worry too much about line length
{
.indexed = 1,...
}, {
}Quoted 27 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +27
-0+ .indexed = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_HYSTERESIS), + + .scan_index = CHANNEL_SCAN_INDEX_HINGE_ANGLE }, + { .type = IIO_ANGL, + .indexed = 1, + .channel = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = +BIT (IIO_CHAN_INFO_OFFSET ) |BIT (IIO_CHAN_INFO_SCALE ) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_SCREEN_ANGLE }, + { .type = IIO_ANGL, + .indexed = 1, + .channel = 2, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = +BIT (IIO_CHAN_INFO_OFFSET ) |BIT (IIO_CHAN_INFO_SCALE ) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = CHANNEL_SCAN_INDEX_KEYBOARD_ANGLE }, + + IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP) +};
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 85
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+ +/* Adjust channel real bits based on report descriptor */ +static void hinge_adjust_channel_bit_mask (struct iio_chan_spec *channels, +int channel,int size) +{ + channels[channel].scan_type.sign ='s' ; +/* Real storage bits will change based on the report desc. */ + channels[channel].scan_type.realbits = size *8 ; +/* Maximum size of a sample to capture is u32 */ + channels[channel].scan_type.storagebits =sizeof (u32) *8 ;
Why are we 'adjusting' this or the sign marker above? They appear to be fixed. From this code I'd expect this function to only be changing realbits. The rest should be in the channel array template you have above.
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 95
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+} + +/* Channel read_raw handler */ +static int hinge_read_raw (struct iio_dev *indio_dev, +struct iio_chan_spec const *chan,int *val,int *val2, +long mask) +{ +struct hinge_state *st =iio_priv (indio_dev); +struct hid_sensor_hub_device *hsdev; +int report_id =-1 ;
Is there a path in which this is used where it isn't set before use?
Quoted 4 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +4
-0+int ret_type; +s32 min; + + hsdev = st->common_attributes.hsdev;
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 109
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+ + *val =0 ; + *val2 =0 ; +switch (mask) { +case IIO_CHAN_INFO_RAW : +hid_sensor_power_state (&st->common_attributes, true); + report_id = st->hinge[chan->scan_index].report_id; + min = st->hinge[chan->scan_index].logical_minimum; +if (report_id <0 ) { + *val =0 ;
If you return an error code the *val won't be used for anything so no need to clear it.
Likewise, if you set type to IIO_VAL_INT, *val2 is not used by the core so no need to ensure that is 0 either.
Quoted 25 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +25
-0+hid_sensor_power_state (&st->common_attributes, false); +return -EINVAL ; + } + + *val =sensor_hub_input_attr_get_raw_value ( + st->common_attributes.hsdev, hsdev->usage, + hinge_addresses[chan->scan_index], report_id, +SENSOR_HUB_SYNC , min <0 ); + +hid_sensor_power_state (&st->common_attributes, false); + ret_type =IIO_VAL_INT ; +break ; +case IIO_CHAN_INFO_SCALE : + *val = st->scale_pre_decml; + *val2 = st->scale_post_decml; + ret_type = st->scale_precision; +break ; +case IIO_CHAN_INFO_OFFSET : + *val = st->value_offset; + ret_type =IIO_VAL_INT ; +break ; +case IIO_CHAN_INFO_SAMP_FREQ : + ret_type =hid_sensor_read_samp_freq_value ( + &st->common_attributes, val, val2); +break ;
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 144
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+case IIO_CHAN_INFO_HYSTERESIS : + ret_type =hid_sensor_read_raw_hyst_value ( + &st->common_attributes, val, val2); +break ; +default : + ret_type = -EINVAL ; +break ; + } + +return ret_type;
Use returns in the switch statement. Shorter more readable code. (slightly!)
Quoted 15 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +15
-0+} + +/* Channel write_raw handler */ +static int hinge_write_raw (struct iio_dev *indio_dev, +struct iio_chan_spec const *chan,int val,int val2, +long mask) +{ +struct hinge_state *st =iio_priv (indio_dev); +int ret; + +switch (mask) { +case IIO_CHAN_INFO_SAMP_FREQ : + ret =hid_sensor_write_samp_freq_value (&st->common_attributes, + val, val2); +break ;
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 169
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+case IIO_CHAN_INFO_HYSTERESIS : + ret =hid_sensor_write_raw_hyst_value (&st->common_attributes, + val, val2); + +break ; +default : + ret = -EINVAL ; + } + +return ret;
Might as well use direct returns in the switch statement. Saves a few lines of code and isn't any harder to read.
Quoted 18 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +18
-0+} + +static int hinge_read_label (struct iio_dev *indio_dev, +struct iio_chan_spec const *chan,char *label) +{ +struct hinge_state *st =iio_priv (indio_dev); + +return sprintf (label,"%s\n" , st->labels[chan->channel]); +} + +static const struct iio_info hinge_info = { + .read_raw = hinge_read_raw, + .write_raw = hinge_write_raw, + .read_label = hinge_read_label, +}; + +/* +* Callback handler to send event after all samples are received
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 197
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+* and captured. +*/ +static int hinge_proc_event (struct hid_sensor_hub_device *hsdev, +unsigned int usage_id,void *priv) +{ +struct iio_dev *indio_dev =platform_get_drvdata (priv); +struct hinge_state *st =iio_priv (indio_dev); + +dev_dbg (&indio_dev->dev,"%s timestamp:%llu scan_bytes:%d\n" , __func__, + st->timestamp, indio_dev->scan_bytes);
This feels like left over debug that won't make a huge amount of sense in a production driver. I'd drop it.
Quoted 28 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +28
-0+ +if (atomic_read (&st->common_attributes.data_ready)) { +if (!st->timestamp) + st->timestamp =iio_get_time_ns (indio_dev); + +iio_push_to_buffers_with_timestamp (indio_dev, &st->scan, + st->timestamp); + + st->timestamp =0 ; + } +return 0 ; +} + +/* Capture samples in local storage */ +static int hinge_capture_sample (struct hid_sensor_hub_device *hsdev, +unsigned int usage_id,size_t raw_len, +char *raw_data,void *priv) +{ +struct iio_dev *indio_dev =platform_get_drvdata (priv); +struct hinge_state *st =iio_priv (indio_dev); +int offset; + +switch (usage_id) { +case HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (1 ): +case HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (2 ): +case HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (3 ): + offset = usage_id -HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (1 ); + st->scan.hinge_val[offset] = *(u32 *)raw_data;
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 235
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+return 0 ; +case HID_USAGE_SENSOR_TIME_TIMESTAMP : + st->timestamp =hid_sensor_convert_timestamp ( + &st->common_attributes, *(int64_t *)raw_data); +return 0 ; +default : +return -EINVAL ; + } + +return 0 ;
Can't get here that I can see so drop this final return.
Quoted 9 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +9
-0+} + +/* Parse report which is specific to an usage id */ +static int hinge_parse_report (struct platform_device *pdev, +struct hid_sensor_hub_device *hsdev, +struct iio_chan_spec *channels, +unsigned int usage_id,struct hinge_state *st) +{ +int ret;
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 254
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+int i; + +for (i =0 ; i <CHANNEL_SCAN_INDEX_MAX ; ++i) { + ret =sensor_hub_input_get_attribute_info ( + hsdev,HID_INPUT_REPORT , usage_id, hinge_addresses[i], + &st->hinge[i]); +if (ret <0 ) +return ret; + +hinge_adjust_channel_bit_mask (channels, i, st->hinge[i].size);
Superficially doesn't seem to be anything to do with a bit_mask? Perhaps rename.
Quoted 33 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +33
-0+ } + + st->scale_precision =hid_sensor_format_scale ( +HID_USAGE_SENSOR_HINGE , + &st->hinge[CHANNEL_SCAN_INDEX_HINGE_ANGLE ], + &st->scale_pre_decml, &st->scale_post_decml); + +/* Set Sensitivity field ids, when there is no individual modifier */ +if (st->common_attributes.sensitivity.index <0 ) { +sensor_hub_input_get_attribute_info ( + hsdev,HID_FEATURE_REPORT , usage_id, +HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | +HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE (1 ), + &st->common_attributes.sensitivity); +dev_dbg (&pdev->dev,"Sensitivity index:report %d:%d\n" , + st->common_attributes.sensitivity.index, + st->common_attributes.sensitivity.report_id); + } + +return ret; +} + +/* Function to initialize the processing for usage id */ +static int hid_hinge_probe (struct platform_device *pdev) +{ +struct hinge_state *st; +struct iio_dev *indio_dev; +struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; +int ret; + + indio_dev =devm_iio_device_alloc (&pdev->dev,sizeof (*st)); +if (indio_dev ==NULL ) +return -ENOMEM ;
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 297
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+ +platform_set_drvdata (pdev, indio_dev); + + st =iio_priv (indio_dev); + st->common_attributes.hsdev = hsdev; + st->common_attributes.pdev = pdev; + st->indio_dev = indio_dev; + st->labels[0 ] ="hinge" ; + st->labels[1 ] ="screen" ; + st->labels[2 ] ="keyboard" ;
As these are const, you should be fine I think to put them in a static const array and just assign a pointer here.
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 308
Quoted 11 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +11
-0+ + ret =hid_sensor_parse_common_attributes (hsdev, hsdev->usage, + &st->common_attributes); +if (ret) { +dev_err (&pdev->dev,"failed to setup common attributes\n" ); +return ret; + } + + indio_dev->num_channels =ARRAY_SIZE (hinge_channels); + indio_dev->channels = +kmemdup (hinge_channels,sizeof (hinge_channels),GFP_KERNEL );
devm_kmemdup - see below.
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 315
Quoted 7 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +7
-0+ + ret =hinge_parse_report (pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, + hsdev->usage, st); +if (ret) { +dev_err (&pdev->dev,"failed to setup attributes\n" ); + goto error_out;
With devm_kmemdup will be able to return directly here.
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 328
Quoted 13 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +13
-0+ } + + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &hinge_info; + indio_dev->name ="hinge" ; + indio_dev->modes =INDIO_DIRECT_MODE ; + +atomic_set (&st->common_attributes.data_ready,0 ); + ret =hid_sensor_setup_trigger (indio_dev, indio_dev->name, + &st->common_attributes); +if (ret <0 ) { +dev_err (&pdev->dev,"trigger setup failed\n" ); + goto error_out;
return directly with change as suggested above.
Quoted 14 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +14
-0+ } + + ret =iio_device_register (indio_dev); +if (ret) { +dev_err (&pdev->dev,"device register failed\n" ); + goto error_remove_trigger; + } + + st->callbacks.send_event = hinge_proc_event; + st->callbacks.capture_sample = hinge_capture_sample; + st->callbacks.pdev = pdev; + ret =sensor_hub_register_callback (hsdev, hsdev->usage, &st->callbacks); +if (ret <0 ) { +dev_err (&pdev->dev,"callback reg failed\n" );
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 352
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+ goto error_iio_unreg; + } +return ret; + +error_iio_unreg: +iio_device_unregister (indio_dev); +error_remove_trigger: +hid_sensor_remove_trigger (indio_dev, &st->common_attributes); +error_out: +kfree (indio_dev->channels);
As mentioned below, use devm_kmemdup
Quoted 4 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +4
-0+return ret; +} + +/* Function to deinitialize the processing for usage id */
drivers/iio/position/hid-sensor-custom-intel-hinge.c line 366
Quoted 10 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +10
-0+static int hid_hinge_remove (struct platform_device *pdev) +{ +struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; +struct iio_dev *indio_dev =platform_get_drvdata (pdev); +struct hinge_state *st =iio_priv (indio_dev); + +sensor_hub_remove_callback (hsdev, hsdev->usage); +iio_device_unregister (indio_dev); +hid_sensor_remove_trigger (indio_dev, &st->common_attributes); +kfree (indio_dev->channels);
As this is last, we could have ended up with the same order using a devm_kmemdup for indio_dev->channels and had same result with slightly simpler error handling etc.
Quoted 27 lines
drivers/iio/position/hid-sensor-custom-intel-hinge.c new file +27
-0+ +return 0 ; +} + +static const struct platform_device_id hid_hinge_ids[] = { + { +/* Format: HID-SENSOR-INT-usage_id_in_hex_lowercase */ + .name ="HID-SENSOR-INT-020b" , + }, + {/* sentinel */ } +}; +MODULE_DEVICE_TABLE (platform, hid_hinge_ids); + +static struct platform_driver hid_hinge_platform_driver = { + .id_table = hid_hinge_ids, + .driver = { + .name =KBUILD_MODNAME , + .pm = &hid_sensor_pm_ops, + }, + .probe = hid_hinge_probe, + .remove = hid_hinge_remove, +}; +module_platform_driver (hid_hinge_platform_driver); + +MODULE_DESCRIPTION ("HID Sensor Hinge" ); +MODULE_AUTHOR ("Ye Xiang <[email protected]>" ); +MODULE_LICENSE ("GPL" );
PATCH v3 3/3 iio:Documentation: Add documentation for hinge sensor channels
In reply to Ye XiangAdd channel description for hinge sensor, including channel label attribute and raw data description.
--- Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
Documentation/ABI/testing/sysfs-bus-iio +17 -0
@@ -1802,3 +1802,20 @@ Contact: [email protected] Description: Unscaled light intensity according to CIE 1931/DIN 5033 color space. Units after application of scale are nano nanowatts per square meter. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw +KernelVersion: 5.12 +Contact: [email protected] +Description: + Angle of rotation for channel Y. Units after application of scale + and offset are radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label +KernelVersion: 5.12 +Contact: [email protected] +Description: + Optional symbolic label for channel Y. + For Intel hid hinge sensor, the label values are: + hinge, keyboard, screen. It means the three channels + each correspond respectively to hinge angle, keyboard angle, + and screen angle.
Signature · 1 line
2.17.1
Srinivas Pandruvada
maintainerRe: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
Quoted 19 lines · Ye Xiang
Add channel description for hinge sensor, including channel label attribute and raw data description.
Signed-off-by Ye Xiang <[email protected]>--- Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)Documentation/ABI/testing/sysfs-bus-iio +0
-0@@ -1802,3 +1802,20 @@ Contact: [email protected] Description: Unscaled light intensity according to CIE 1931/DIN 5033color space.
Units after application of scale are nano nanowatts per
square meter.
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1806
Quoted 2 lines
Documentation/ABI/testing/sysfs-bus-iio +2
-0+ +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw
Channel "Y" doesn't sound to be a variable. Why not just say "*"
Thanks,
Srinivas
Quoted 17 lines
Documentation/ABI/testing/sysfs-bus-iio +4
-0+KernelVersion: 5.12 +Contact: [email protected] +Description: + Angle of rotation for channel Y. Units afterapplication of scale
Documentation/ABI/testing/sysfs-bus-iio +10
-0+ and offset are radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label +KernelVersion: 5.12 +Contact: [email protected] +Description: + Optional symbolic label for channel Y. + For Intel hid hinge sensor, the label values are: + hinge, keyboard, screen. It means the three channels + each correspond respectively to hinge angle, keyboardangle,
Documentation/ABI/testing/sysfs-bus-iio +1
-0+ and screen angle.
Jonathan Cameron
maintainerRe: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
Quoted 9 lines · On Fri, 04 Dec 2020 03:40:15 -0800 Srinivas Pandruvada…
Quoted 8 lines · Ye Xiang
Add channel description for hinge sensor, including channel label attribute and raw data description.
Signed-off-by Ye Xiang <[email protected]>--- Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
Quoted 14 lines
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1806
Quoted 13 lines
Documentation/ABI/testing/sysfs-bus-iio +0
-0@@ -1802,3 +1802,20 @@ Contact: [email protected] Description: Unscaled light intensity according to CIE 1931/DIN 5033color space.
Units after application of scale are nano nanowatts per
square meter.Documentation/ABI/testing/sysfs-bus-iio +2
-0+ +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_rawChannel "Y" doesn't sound to be a variable. Why not just say "*"
Long term convention. More generally you need a way to refer to the individual wild cards. Sometimes there are more than the two we have here.
Not entirely sure where the convention comes from but it is used throughout this file and I doubt I invented it.
Jonathan
Quoted 22 lines
Thanks,
SrinivasQuoted 17 lines
Documentation/ABI/testing/sysfs-bus-iio +4
-0+KernelVersion: 5.12 +Contact: [email protected] +Description: + Angle of rotation for channel Y. Units afterapplication of scale
Documentation/ABI/testing/sysfs-bus-iio +10
-0+ and offset are radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label +KernelVersion: 5.12 +Contact: [email protected] +Description: + Optional symbolic label for channel Y. + For Intel hid hinge sensor, the label values are: + hinge, keyboard, screen. It means the three channels + each correspond respectively to hinge angle, keyboardangle,
Documentation/ABI/testing/sysfs-bus-iio +1
-0+ and screen angle.
Jonathan Cameron
maintainerRe: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
In reply to Ye XiangQuoted 13 lines · On Thu, 3 Dec 2020 11:53:52 +0800 Ye Xiang <[email protected]> wrote:
Add channel description for hinge sensor, including channel label attribute and raw data description.
Signed-off-by Ye Xiang <[email protected]>--- Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)Documentation/ABI/testing/sysfs-bus-iio +0
-0
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1811
Quoted 10 lines
Documentation/ABI/testing/sysfs-bus-iio +7
-0@@ -1802,3 +1802,20 @@ Contact: [email protected] Description: Unscaled light intensity according to CIE 1931/DIN 5033 color space. Units after application of scale are nano nanowatts per square meter. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw +KernelVersion: 5.12 +Contact: [email protected] +Description: + Angle of rotation for channel Y. Units after application of scale + and offset are radians.
This entry is already mostly in the doc around line 200, just without the index. Please just add the What: line to that block to reduce repetition. If you want to add... "Where present, Y indexes the channel." or something like that feel free.
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1821
Quoted 10 lines
Documentation/ABI/testing/sysfs-bus-iio +10
-0+ +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label +KernelVersion: 5.12 +Contact: [email protected] +Description: + Optional symbolic label for channel Y. + For Intel hid hinge sensor, the label values are: + hinge, keyboard, screen. It means the three channels + each correspond respectively to hinge angle, keyboard angle, + and screen angle.
Makes sense to keep this block separate given the additional info provided. Alternative would be to add it to the one with in_voltageY_label which would be odd given what follows!
Thanks,
Jonathan
Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
Hi Jonathan
Thanks for review and comments.
Quoted 23 lines · Jonathan Cameron
Quoted 20 lines · On Thu, 3 Dec 2020 11:53:52 +0800 Ye Xiang <[email protected]> wrote:
Add channel description for hinge sensor, including channel label attribute and raw data description.
Signed-off-by Ye Xiang <[email protected]>--- Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)Documentation/ABI/testing/sysfs-bus-iio +4
-0@@ -1802,3 +1802,20 @@ Contact: [email protected] Description: Unscaled light intensity according to CIE 1931/DIN 5033 color space. Units after application of scale are nano nanowatts per square meter. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw +KernelVersion: 5.12 +Contact: [email protected]
Quoted 8 lines
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1811
Quoted 3 lines
Documentation/ABI/testing/sysfs-bus-iio +3
-0+Description: + Angle of rotation for channel Y. Units after application of scale + and offset are radians.This entry is already mostly in the doc around line 200, just without the index. Please just add the What: line to that block to reduce repetition. If you want to add... "Where present, Y indexes the channel." or something like that feel free.
When adding in_anglY_raw to in_angl_raw block, Should I update the KernelVersion form 4.17 to 5.12? Like blow:
What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw
What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw
KernelVersion: 5.12
Contact: [email protected]
Description:
Angle of rotation. Units after application of scale and offset are radians. Where present, Y indexes the channel.
Quoted 16 lines
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1821
Quoted 12 lines
Documentation/ABI/testing/sysfs-bus-iio +10
-0+ +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label +KernelVersion: 5.12 +Contact: [email protected] +Description: + Optional symbolic label for channel Y. + For Intel hid hinge sensor, the label values are: + hinge, keyboard, screen. It means the three channels + each correspond respectively to hinge angle, keyboard angle, + and screen angle.Makes sense to keep this block separate given the additional info provided. Alternative would be to add it to the one with
in_voltageY_labelwhich would be odd given what follows!
Ok, Then I will keep the in_anglY_label block here. BTW, I didnot see in_voltageY_label in sysfs-bus-iio in current kernel master branch.
Quoted 5 lines
Thanks,
Jonathan
Thanks
Ye, Xiang
Quoted 1 line
Jonathan Cameron
maintainerRe: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
Quoted 39 lines · Xiang
Hi Jonathan
Thanks for review and comments.
Quoted 23 lines · Jonathan Cameron
Quoted 20 lines · On Thu, 3 Dec 2020 11:53:52 +0800 Ye Xiang <[email protected]> wrote:
Add channel description for hinge sensor, including channel label attribute and raw data description.
Signed-off-by Ye Xiang <[email protected]>--- Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)Documentation/ABI/testing/sysfs-bus-iio +4
-0@@ -1802,3 +1802,20 @@ Contact: [email protected] Description: Unscaled light intensity according to CIE 1931/DIN 5033 color space. Units after application of scale are nano nanowatts per square meter. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw +KernelVersion: 5.12 +Contact: [email protected]Quoted 8 lines
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1811
Quoted 3 lines
Documentation/ABI/testing/sysfs-bus-iio +3
-0+Description: + Angle of rotation for channel Y. Units after application of scale + and offset are radians.This entry is already mostly in the doc around line 200, just without the index. Please just add the What: line to that block to reduce repetition. If you want to add... "Where present, Y indexes the channel." or something like that feel free.
When adding
in_anglY_rawtoin_angl_rawblock, Should I update the KernelVersion form 4.17 to 5.12? Like blow:
Quoted 7 lines
What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw
What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw
KernelVersion: 5.12
Contact: [email protected]
Description:
Angle of rotation. Units after application of scale and offset are radians. Where present, Y indexes the channel.
No. This is an unfortunate limitation of these files unless we keep duplicating nearly identical text.
I'm not that worried about documenting an optional bit of ABI as apparently being in an earlier kernel than it actually was. That way any userspace will work. The other way around is more likely to cause problems.
Quoted 17 lines
Quoted 17 lines
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1821
Quoted 13 lines
Documentation/ABI/testing/sysfs-bus-iio +10
-0+ +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label +KernelVersion: 5.12 +Contact: [email protected] +Description: + Optional symbolic label for channel Y. + For Intel hid hinge sensor, the label values are: + hinge, keyboard, screen. It means the three channels + each correspond respectively to hinge angle, keyboard angle, + and screen angle.Makes sense to keep this block separate given the additional info provided. Alternative would be to add it to the one with
in_voltageY_labelwhich would be odd given what follows!
Quoted 2 lines
Ok, Then I will keep the
in_anglY_labelblock here. BTW, I didnot seein_voltageY_labelin sysfs-bus-iio in current kernel master branch.
It was part of the series that added the support for per channel labels to the core. 3079188f821c ("iio:Documentation: Add documentation for label channel attribute") so will only going into current master in the merge window that will open shortly.
Thanks,
Jonathan
Quoted 9 lines
Quoted 6 lines
Thanks,
Jonathan
Thanks
Ye, XiangQuoted 1 line
Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
Quoted 50 lines · Jonathan Cameron
Quoted 39 lines · Xiang
Hi Jonathan
Thanks for review and comments.
Quoted 23 lines · Jonathan Cameron
Quoted 20 lines · On Thu, 3 Dec 2020 11:53:52 +0800 Ye Xiang <[email protected]> wrote:
Add channel description for hinge sensor, including channel label attribute and raw data description.
Signed-off-by Ye Xiang <[email protected]>--- Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)Documentation/ABI/testing/sysfs-bus-iio +4
-0@@ -1802,3 +1802,20 @@ Contact: [email protected] Description: Unscaled light intensity according to CIE 1931/DIN 5033 color space. Units after application of scale are nano nanowatts per square meter. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw +KernelVersion: 5.12 +Contact: [email protected]Quoted 8 lines
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1811
Quoted 3 lines
Documentation/ABI/testing/sysfs-bus-iio +3
-0+Description: + Angle of rotation for channel Y. Units after application of scale + and offset are radians.This entry is already mostly in the doc around line 200, just without the index. Please just add the What: line to that block to reduce repetition. If you want to add... "Where present, Y indexes the channel." or something like that feel free.
When adding
in_anglY_rawtoin_angl_rawblock, Should I update the KernelVersion form 4.17 to 5.12? Like blow:Quoted 7 lines
What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw
What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw
KernelVersion: 5.12
Contact: [email protected]
Description:
Angle of rotation. Units after application of scale and offset are radians. Where present, Y indexes the channel.
Quoted 6 lines
No. This is an unfortunate limitation of these files unless we keep duplicating nearly identical text.
I'm not that worried about documenting an optional bit of ABI as apparently being in an earlier kernel than it actually was. That way any userspace will work. The other way around is more likely to cause problems.
Got it, then I will keep KernelVersion 4.17. will send the next version out for review soon. Thanks again for the review.
Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Quoted 4 lines
Documentation/ABI/testing/sysfs-bus-iio Contact: [email protected] · line 1821
Quoted 10 lines
Documentation/ABI/testing/sysfs-bus-iio +10
-0+ +What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label +KernelVersion: 5.12 +Contact: [email protected] +Description: + Optional symbolic label for channel Y. + For Intel hid hinge sensor, the label values are: + hinge, keyboard, screen. It means the three channels + each correspond respectively to hinge angle, keyboard angle, + and screen angle.Makes sense to keep this block separate given the additional info provided. Alternative would be to add it to the one with
in_voltageY_labelwhich would be odd given what follows!
Quoted 5 lines
Quoted 2 lines
Ok, Then I will keep the
in_anglY_labelblock here. BTW, I didnot seein_voltageY_labelin sysfs-bus-iio in current kernel master branch.It was part of the series that added the support for per channel labels to the core.
3079188f821c("iio:Documentation: Add documentation for label channel attribute") so will only going into current master in the merge window that will open shortly.
got it.
Quoted 1 line
Thanks
Ye, Xiang
Srinivas Pandruvada
maintainerQuoted 3 lines · Ye Xiang
Here three separate iio devices are presented which presents angle for
hinge, keyboard and screen.
You are presenting one IIO device now with three channels.
Quoted 40 lines
This driver works on devices with Intel integrated sensor hub, where hinge sensor is presented using a custom sensor usage id.
Here the angle is presented in degrees, which is converted to radians.
Changes since v2:
- use 1 iio device instead of 3 for hinge sensor.
- use indexed channel instead of modified channel and added channel labels.
- remove 2,3 patch in last version, add a document patch to
describe the
hinge channels.
- hid-sensor-custom: use meaningful return value inget_known_custom_sensor_indexand checked in call side.
-hid-sensor-ids.h: useHID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(x)
to
define custom sensor value.Changes since v1:
- fixed errors reported by lkpYe Xiang (3):
HID: hid-sensor-custom: Add custom sensor iio support
iio: hid-sensors: Add hinge sensor driver iio:Documentation: Add documentation for hinge sensor channelsDocumentation/ABI/testing/sysfs-bus-iio | 17 + drivers/hid/hid-sensor-custom.c | 181 ++++++++ .../hid-sensors/hid-sensor-attributes.c | 2 + drivers/iio/position/Kconfig | 16 + drivers/iio/position/Makefile | 1 + .../position/hid-sensor-custom-intel-hinge.c | 393 ++++++++++++++++++ include/linux/hid-sensor-ids.h | 14 + 7 files changed, 624 insertions(+) create mode 100644 drivers/iio/position/hid-sensor-custom-intel-
hinge.c