Skip to contentSkip to conversation

scsi: ufs: Enable WB flush during suspend only if WB is enabled

PATCH In review Stanley Chu 2 participants 3 messages Dec 7, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 scsi: ufs: Enable WB flush during suspend only if WB is enabled

WriteBootser flush during suspend is not necessary to be enabled if WriteBooster feature is disabled. Simply adding a check to prevent unexpected power drain.

---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index 4879e87577e1..89fa8b9ac11d 100644
@@ -5458,7 +5458,7 @@ static bool ufshcd_wb_need_flush(struct ufs_hba *hba)
 	u32 avail_buf;
 	u8 index;
 
-	if (!ufshcd_is_wb_allowed(hba))
+	if (!ufshcd_is_wb_allowed(hba) || !hba->wb_enabled)
 		return false;
 	/*
 	 * The ufs device needs the vcc to be ON to flush.
Signature · 1 line
2.18.0
#1 lore raw
Quoted 22 lines · Stanley Chu

WriteBootser flush during suspend is not necessary to be enabled if WriteBooster feature is disabled. Simply adding a check to prevent unexpected power drain.

---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index 4879e87577e1..89fa8b9ac11d 100644
@@ -5458,7 +5458,7 @@ static bool ufshcd_wb_need_flush(struct ufs_hba
 *hba)
        u32 avail_buf;
        u8 index;
 
-       if (!ufshcd_is_wb_allowed(hba))
+       if (!ufshcd_is_wb_allowed(hba) || !hba->wb_enabled)
                return false;
        /*
Quoted 1 line

* The ufs device needs the vcc to be ON to flush.

Hi Stanley

In the 3.1 Spec:

"If the fWriteBoosterEn flag is set to zero, data written to any logical unit is written in normal storage.
If the fWriteBoosterEn flag is set to one and the device is configured in “shared buffer” mode, data written to any logical unit is written in the shared WriteBooster Buffer."

so, IMO, fWriteBoosterEn is independant with WB buffer flush.

as for the flush:

"There are two methods for flushing data from the WriteBooster Buffer to the normal storage: one is using an explicit flush command, the other enabling the flushing during link hibernate state. If the fWriteBoosterBufferFlushEn flag is set to one, the device shall flush the data stored in the WriteBooster Buffer to the normal storage. If fWriteBoosterBufferFlushDuringHibernate is set to one, the device flushes the WriteBooster Buffer data automatically whenever the link enters the hibernate (HIBERN8) state."

IMO, for the flush, it is controlled by fWriteBoosterBufferFlushEn and fWriteBoosterBufferFlushDuringHibernate.

how do you understand the above two paragraphs from Spec?

thanks,
Bean

_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek

#2 lore raw

Hi Bean,

Quoted 49 lines · Bean Huo
Quoted 22 lines · Stanley Chu

WriteBootser flush during suspend is not necessary to be enabled if WriteBooster feature is disabled. Simply adding a check to prevent unexpected power drain.

---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index 4879e87577e1..89fa8b9ac11d 100644
@@ -5458,7 +5458,7 @@ static bool ufshcd_wb_need_flush(struct ufs_hba
 *hba)
        u32 avail_buf;
        u8 index;
 
-       if (!ufshcd_is_wb_allowed(hba))
+       if (!ufshcd_is_wb_allowed(hba) || !hba->wb_enabled)
                return false;
        /*
Quoted 1 line

* The ufs device needs the vcc to be ON to flush.

Hi Stanley

In the 3.1 Spec:

"If the fWriteBoosterEn flag is set to zero, data written to any logical unit is written in normal storage.
If the fWriteBoosterEn flag is set to one and the device is configured in “shared buffer” mode, data written to any logical unit is written in the shared WriteBooster Buffer."

so, IMO, fWriteBoosterEn is independant with WB buffer flush.

as for the flush:

"There are two methods for flushing data from the WriteBooster Buffer to the normal storage: one is using an explicit flush command, the other enabling the flushing during link hibernate state. If the fWriteBoosterBufferFlushEn flag is set to one, the device shall flush the data stored in the WriteBooster Buffer to the normal storage. If fWriteBoosterBufferFlushDuringHibernate is set to one, the device flushes the WriteBooster Buffer data automatically whenever the link enters the hibernate (HIBERN8) state."

Quoted 4 lines

IMO, for the flush, it is controlled by fWriteBoosterBufferFlushEn and fWriteBoosterBufferFlushDuringHibernate.

how do you understand the above two paragraphs from Spec?

Thanks for your review and feedback! : )

Actually this patch is not motivated by any limitation in spec. I was thinking that if host disables WriteBooster, which may imply that host does not want any WB related operations in device during the disabled period.

However I may be wrong because host may only want not consuming any WB buffer in device during the disabled time, but still want the "flush" operation in device to clean WB buffer as quickly as possible to fulfill future high-throughput requirement after WB is re-enabled.

So, I would drop this patch.

Thanks,
Stanley Chu

Quoted 6 lines

thanks,
Bean