xhci features for usb-next
Subsystems (3)
cover xhci features for usb-next
Hi Greg
A few patches for usb-next, a bit late in the cycle but nice if they can make 5.11.
-Mathias
Hans de Goede (1):
xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP
Li Jun (1):
xhci: Give USB2 ports time to enter U3 in bus suspend
Mika Westerberg (1):
xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI
Tejas Joglekar (2):
usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
usb: xhci: Use temporary buffer to consolidate SG
drivers/usb/host/xhci-hub.c | 4 ++ drivers/usb/host/xhci-pci.c | 6 +- drivers/usb/host/xhci-plat.c | 3 + drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.c | 129 ++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 5 ++ 6 files changed, 146 insertions(+), 3 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/5 usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
From: Tejas Joglekar <[email protected]>
This commit uses the private data passed by parent device to set the quirk for Synopsys xHC. This patch fixes the SNPS xHC hang issue when the data is scattered across small buffers which does not make atleast MPS size for given TRB cache size of SNPS xHC.
--- drivers/usb/host/xhci-plat.c | 3 +++ drivers/usb/host/xhci.h | 1 + 2 files changed, 4 insertions(+)
drivers/usb/host/xhci-plat.c +3 -0
@@ -333,6 +333,9 @@ static int xhci_plat_probe(struct platform_device *pdev)if (priv && (priv->quirks &XHCI_SKIP_PHY_INIT )) hcd->skip_phy_initialization =1 ; +if (priv && (priv->quirks &XHCI_SG_TRB_CACHE_SIZE_QUIRK )) + xhci->quirks |=XHCI_SG_TRB_CACHE_SIZE_QUIRK ; + ret =usb_add_hcd (hcd, irq,IRQF_SHARED );if (ret) goto disable_usb_phy;
drivers/usb/host/xhci.h +1 -0
@@ -1878,6 +1878,7 @@ struct xhci_hcd {#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)#define XHCI_SKIP_PHY_INIT BIT_ULL(37)#define XHCI_DISABLE_SPARSE BIT_ULL(38) +#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)unsigned int num_active_eps;unsigned int limit_active_eps;
Signature · 1 line
2.25.1
PATCH 2/5 usb: xhci: Use temporary buffer to consolidate SG
In reply to Mathias NymanFrom: Tejas Joglekar <[email protected]>
The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8 for HS. The controller loads and updates the TRB cache from the transfer ring in system memory whenever the driver issues a start transfer or update transfer command.
For chained TRBs, the Synopsys xHC requires that the total amount of bytes for all TRBs loaded in the TRB cache be greater than or equal to 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
If this requirement is not met, the controller will not be able to send or receive a packet and it will hang causing a driver timeout and error.
This can be a problem if a class driver queues SG requests with many small-buffer entries. The XHCI driver will create a chained TRB for each entry which may trigger this issue.
This patch adds logic to the XHCI driver to detect and prevent this from happening.
For every (TRB_CACHE_SIZE - 2), we check the total buffer size of the SG list and if the last window of (TRB_CACHE_SIZE - 2) SG list length and we don't make up at least 1 MPS, we create a temporary buffer to consolidate full SG list into the buffer.
We check at (TRB_CACHE_SIZE - 2) window because it is possible that there would be a link and/or event data TRB that take up to 2 of the cache entries.
We discovered this issue with devices on other platforms but have not yet come across any device that triggers this on Linux. But it could be a real problem now or in the future. All it takes is N number of small chained TRBs. And other instances of the Synopsys IP may have smaller values for the TRB_CACHE_SIZE which would exacerbate the problem.
--- drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.c | 129 ++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 4 ++ 3 files changed, 133 insertions(+), 2 deletions(-)
drivers/usb/host/xhci-ring.c +1 -1
@@ -3325,7 +3325,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, full_len = urb->transfer_buffer_length;/* If we have scatter/gather list, we use it. */ -if (urb->num_sgs) { +if (urb->num_sgs && !(urb->transfer_flags &URB_DMA_MAP_SINGLE )) { num_sgs = urb->num_mapped_sgs; sg = urb->sg; addr = (u64 )sg_dma_address (sg);
drivers/usb/host/xhci.c +128 -1
153 lines not on this page · raw message
drivers/usb/host/xhci.h +4 -0
@@ -1330,6 +1330,10 @@ enum xhci_setup_dev {#define TRB_SIA (1<<31)#define TRB_FRAME_ID (p) (((p) & 0x7ff) << 20) +/* TRB cache size for xHC with TRB cache */ +#define TRB_CACHE_SIZE_HS 8 +#define TRB_CACHE_SIZE_SS 16 +struct xhci_generic_trb {__le32 field[4 ]; };
Signature · 1 line
2.25.1
PATCH 3/5 xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP
In reply to Mathias NymanFrom: Hans de Goede <[email protected]>
The xHCI controller on Alpine Ridge LP keeps the whole Thunderbolt controller awake if the host controller is not allowed to sleep. This is the case even if no USB devices are connected to the host.
Add the Intel Alpine Ridge LP product-id to the list of product-ids for which we allow runtime PM by default.
--- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/host/xhci-pci.c +2 -0
@@ -47,6 +47,7 @@#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6 +#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI 0x15c1#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9
@@ -232,6 +233,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
Signature · 1 line
2.25.1
PATCH 4/5 xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI
In reply to Mathias NymanFrom: Mika Westerberg <[email protected]>
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge.
--- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-pci.c +3 -1
@@ -56,6 +56,7 @@#define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 +#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
@@ -240,7 +241,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device ==PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI || pdev->device ==PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI || pdev->device ==PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI)) + pdev->device ==PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI)) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
Signature · 1 line
2.25.1
Greg KH
maintainerRe: [PATCH 4/5] xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI
Quoted 7 lines · Mathias Nyman
From: Mika Westerberg <[email protected]>
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge.
Quoted 5 lines
Signed-off-by Mika Westerberg <[email protected]>Signed-off-by Mathias Nyman <[email protected]>--- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
Should this be backported to stable kernels too?
thanks,
greg k-h
Re: [PATCH 4/5] xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI
Quoted 8 lines · Greg KH
Quoted 7 lines · Mathias Nyman
From: Mika Westerberg <[email protected]>
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge.
Quoted 7 lines
Quoted 5 lines
Signed-off-by Mika Westerberg <[email protected]>Signed-off-by Mathias Nyman <[email protected]>--- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)Should this be backported to stable kernels too?
I guess that wouldn't hurt.
Hardware is fresh but distros probably base their releases on older stable kernels. This would enable xhci runtime pm as default on those as well
Thanks
Mathias
PATCH 5/5 xhci: Give USB2 ports time to enter U3 in bus suspend
In reply to Mathias NymanFrom: Li Jun <[email protected]>
If a USB2 device wakeup is not enabled/supported the link state may still be in U0 in xhci_bus_suspend(), where it's then manually put to suspended U3 state.
Just as with selective suspend the device needs time to enter U3 suspend before continuing with further suspend operations (e.g. system suspend), otherwise we may enter system suspend with link state in U0.
--- drivers/usb/host/xhci-hub.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/usb/host/xhci-hub.c +4 -0
@@ -1712,6 +1712,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd) hcd->state =HC_STATE_SUSPENDED ; bus_state->next_statechange = jiffies +msecs_to_jiffies (10 );spin_unlock_irqrestore (&xhci->lock, flags); + +if (bus_state->bus_suspended) +usleep_range (5000 ,10000 ); +return 0 ; }
Signature · 1 line
2.25.1