Skip to contentSkip to conversation

SCSI: fix transfer limits for SCSI passthrough

PATCH Superseded Maxim Levitsky 4 participants 12 messages Dec 9, 2020 – Dec 17, 2020 Block layer

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover SCSI: fix transfer limits for SCSI passthrough

This patch series attempts to provide a solution to the problem of the transfer limits of the raw file driver (host_device/file-posix), some of which I already tried to fix in the past.

I included 2 patches from Tom Yan which fix two issues with reading the limits correctly from the */dev/sg* character devices in the first place.

The only change to these patches is that I tweaked a bit the comments in the source to better document the /dev/sg quirks.

The other two patches in this series split the max transfer limits that qemu block devices expose in two:
One limit is for the regular IO, and another is for the SG_IO (aka bdrv_*_ioctl), and the two device drivers (scsi-block and scsi-generic) that use the later are switched to the new interface.

This should ensure that the raw driver can still advertise the unlimited transfer length, unless it is used for SG_IO, because that yields the highest performance.

Also I include a somewhat unrelated fix to a bug I found in qemu's SCSI passthrough while testing this:
When qemu emulates the VPD block limit page, for a SCSI device that doesn't implement it, it doesn't really advertise the emulated page to the guest.

I tested this by doing both regular and SG_IO passthrough of my USB SD card reader.

That device turned out to be a perfect device for the task, since it has max transfer size of 1024 blocks (512K), and it enforces it.

Also it didn't implement the VPD block limits page,
(transfer size limit probably comes from something USB related) which triggered the unrelated bug.

I was able to see IO errors without the patches, and the wrong max transfer size in the guest, and with patches both issues were gone.

I also found an unrelated issue in /dev/sg passthrough in the kernel. It turns out that in-kernel driver has a limitation of 16 requests in flight, regardless of what underlying device supports.

With a large multi-threaded fio job and a debug print in qemu, it is easy to see it, although the errors don't do much harm to the guest as it retries the IO, and eventually succeed.
It is an open question if this should be solved.

V2: fixed an issue in a patch from Tom Yan (thanks), and removed refactoring from last patch according to Paulo's request.

Maxim Levitsky (3):
block: add max_ioctl_transfer to BlockLimits
block: use blk_get_max_ioctl_transfer for SCSI passthrough block/scsi: correctly emulate the VPD block limits page

Tom Yan (2):
file-posix: split hdev_refresh_limits from raw_refresh_limits
file-posix: add sg_get_max_segments that actually works with sg

 block/block-backend.c          | 12 ++++++
 block/file-posix.c             | 77 +++++++++++++++++++++++++++-------
 block/io.c                     |  2 +
 block/iscsi.c                  |  1 +
 hw/scsi/scsi-generic.c         | 12 ++++--
 include/block/block_int.h      |  4 ++
 include/sysemu/block-backend.h |  1 +
 7 files changed, 90 insertions(+), 19 deletions(-)
Signature · 1 line
2.26.2
#1 lore raw

PATCH v2 1/5 file-posix: split hdev_refresh_limits from raw_refresh_limits

From: Tom Yan <[email protected]>

We can and should get max transfer length and max segments for all host devices / cdroms (on Linux).

Also use MIN_NON_ZERO instead when we clamp max transfer length against max segments.

---
 block/file-posix.c | 59 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 16 deletions(-)
block/file-posix.c +43 -16
index d5fd1dbcd2..226ddbbdad 100644
@@ -1162,6 +1162,12 @@ static void raw_reopen_abort(BDRVReopenState *state)
 
 static int sg_get_max_transfer_length(int fd)
 {
+    /*
+     * BLKSECTGET for /dev/sg* character devices incorrectly returns
+     * the max transfer size in bytes (rather than in blocks).
+     * Also note that /dev/sg* doesn't support BLKSSZGET ioctl.
+     */
+
 #ifdef BLKSECTGET
     int max_bytes = 0;
 
@@ -1175,7 +1181,22 @@ static int sg_get_max_transfer_length(int fd)
 #endif
 }
 
-static int sg_get_max_segments(int fd)
+static int get_max_transfer_length(int fd)
+{
+#if defined(BLKSECTGET)
+    int sect = 0;
+
+    if (ioctl(fd, BLKSECTGET, &sect) == 0) {
+        return sect << 9;
+    } else {
+        return -errno;
+    }
+#else
+    return -ENOSYS;
+#endif
+}
+
+static int get_max_segments(int fd)
 {
 #ifdef CONFIG_LINUX
     char buf[32];
@@ -1230,23 +1251,29 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
 {
     BDRVRawState *s = bs->opaque;
 
-    if (bs->sg) {
-        int ret = sg_get_max_transfer_length(s->fd);
+    raw_probe_alignment(bs, s->fd, errp);
+    bs->bl.min_mem_alignment = s->buf_align;
+    bs->bl.opt_mem_alignment = MAX(s->buf_align, qemu_real_host_page_size);
+}
 
-        if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
-            bs->bl.max_transfer = pow2floor(ret);
-        }
+static void hdev_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+    BDRVRawState *s = bs->opaque;
 
-        ret = sg_get_max_segments(s->fd);
-        if (ret > 0) {
-            bs->bl.max_transfer = MIN(bs->bl.max_transfer,
-                                      ret * qemu_real_host_page_size);
-        }
+    int ret = bs->sg ? sg_get_max_transfer_length(s->fd) :
+                       get_max_transfer_length(s->fd);
+
+    if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
+        bs->bl.max_transfer = pow2floor(ret);
     }
 
-    raw_probe_alignment(bs, s->fd, errp);
-    bs->bl.min_mem_alignment = s->buf_align;
-    bs->bl.opt_mem_alignment = MAX(s->buf_align, qemu_real_host_page_size);
+    ret = get_max_segments(s->fd);
+    if (ret > 0) {
+        bs->bl.max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
+                                           ret * qemu_real_host_page_size);
+    }
+
+    raw_refresh_limits(bs, errp);
 }
 
 static int check_for_dasd(int fd)
@@ -3601,7 +3628,7 @@ static BlockDriver bdrv_host_device = {
     .bdrv_co_pdiscard       = hdev_co_pdiscard,
     .bdrv_co_copy_range_from = raw_co_copy_range_from,
     .bdrv_co_copy_range_to  = raw_co_copy_range_to,
-    .bdrv_refresh_limits = raw_refresh_limits,
+    .bdrv_refresh_limits = hdev_refresh_limits,
     .bdrv_io_plug = raw_aio_plug,
     .bdrv_io_unplug = raw_aio_unplug,
     .bdrv_attach_aio_context = raw_aio_attach_aio_context,
@@ -3725,7 +3752,7 @@ static BlockDriver bdrv_host_cdrom = {
     .bdrv_co_preadv         = raw_co_preadv,
     .bdrv_co_pwritev        = raw_co_pwritev,
     .bdrv_co_flush_to_disk  = raw_co_flush_to_disk,
-    .bdrv_refresh_limits = raw_refresh_limits,
+    .bdrv_refresh_limits = hdev_refresh_limits,
     .bdrv_io_plug = raw_aio_plug,
     .bdrv_io_unplug = raw_aio_unplug,
     .bdrv_attach_aio_context = raw_aio_attach_aio_context,
Signature · 1 line
2.26.2
#2 lore raw

Re: [PATCH v2 1/5] file-posix: split hdev_refresh_limits from raw_refresh_limits

Quoted 20 lines · Maxim Levitsky

From: Tom Yan <[email protected]>

We can and should get max transfer length and max segments for all host devices / cdroms (on Linux).

Also use MIN_NON_ZERO instead when we clamp max transfer length against max segments.

---
 block/file-posix.c | 59 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 16 deletions(-)
block/file-posix.c +0 -0
index d5fd1dbcd2..226ddbbdad 100644

block/file-posix.c static void raw_reopen_abort(BDRVReopenState *state) · line 1169

Quoted 8 lines
block/file-posix.c +5 -0
@@ -1162,6 +1162,12 @@ static void raw_reopen_abort(BDRVReopenState *state)
 
 static int sg_get_max_transfer_length(int fd)
 {
+    /*
+     * BLKSECTGET for /dev/sg* character devices incorrectly returns
+     * the max transfer size in bytes (rather than in blocks).
+     * Also note that /dev/sg* doesn't support BLKSSZGET ioctl.
+     */

The second statement should be removed. Also maybe it's better to have the first one right above the line return max_bytes;.

Quoted 92 lines
block/file-posix.c +38 -17
+
 #ifdef BLKSECTGET
     int max_bytes = 0;
 
@@ -1175,7 +1181,22 @@ static int sg_get_max_transfer_length(int fd)
 #endif
 }
 
-static int sg_get_max_segments(int fd)
+static int get_max_transfer_length(int fd)
+{
+#if defined(BLKSECTGET)
+    int sect = 0;
+
+    if (ioctl(fd, BLKSECTGET, &sect) == 0) {
+        return sect << 9;
+    } else {
+        return -errno;
+    }
+#else
+    return -ENOSYS;
+#endif
+}
+
+static int get_max_segments(int fd)
 {
 #ifdef CONFIG_LINUX
     char buf[32];
@@ -1230,23 +1251,29 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
 {
     BDRVRawState *s = bs->opaque;
 
-    if (bs->sg) {
-        int ret = sg_get_max_transfer_length(s->fd);
+    raw_probe_alignment(bs, s->fd, errp);
+    bs->bl.min_mem_alignment = s->buf_align;
+    bs->bl.opt_mem_alignment = MAX(s->buf_align, qemu_real_host_page_size);
+}
 
-        if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
-            bs->bl.max_transfer = pow2floor(ret);
-        }
+static void hdev_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+    BDRVRawState *s = bs->opaque;
 
-        ret = sg_get_max_segments(s->fd);
-        if (ret > 0) {
-            bs->bl.max_transfer = MIN(bs->bl.max_transfer,
-                                      ret * qemu_real_host_page_size);
-        }
+    int ret = bs->sg ? sg_get_max_transfer_length(s->fd) :
+                       get_max_transfer_length(s->fd);
+
+    if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
+        bs->bl.max_transfer = pow2floor(ret);
     }
 
-    raw_probe_alignment(bs, s->fd, errp);
-    bs->bl.min_mem_alignment = s->buf_align;
-    bs->bl.opt_mem_alignment = MAX(s->buf_align, qemu_real_host_page_size);
+    ret = get_max_segments(s->fd);
+    if (ret > 0) {
+        bs->bl.max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
+                                           ret * qemu_real_host_page_size);
+    }
+
+    raw_refresh_limits(bs, errp);
 }
 
 static int check_for_dasd(int fd)
@@ -3601,7 +3628,7 @@ static BlockDriver bdrv_host_device = {
     .bdrv_co_pdiscard       = hdev_co_pdiscard,
     .bdrv_co_copy_range_from = raw_co_copy_range_from,
     .bdrv_co_copy_range_to  = raw_co_copy_range_to,
-    .bdrv_refresh_limits = raw_refresh_limits,
+    .bdrv_refresh_limits = hdev_refresh_limits,
     .bdrv_io_plug = raw_aio_plug,
     .bdrv_io_unplug = raw_aio_unplug,
     .bdrv_attach_aio_context = raw_aio_attach_aio_context,
@@ -3725,7 +3752,7 @@ static BlockDriver bdrv_host_cdrom = {
     .bdrv_co_preadv         = raw_co_preadv,
     .bdrv_co_pwritev        = raw_co_pwritev,
     .bdrv_co_flush_to_disk  = raw_co_flush_to_disk,
-    .bdrv_refresh_limits = raw_refresh_limits,
+    .bdrv_refresh_limits = hdev_refresh_limits,
     .bdrv_io_plug = raw_aio_plug,
     .bdrv_io_unplug = raw_aio_unplug,
     .bdrv_attach_aio_context = raw_aio_attach_aio_context,
--

2.26.2

#3 lore raw

Re: [PATCH v2 1/5] file-posix: split hdev_refresh_limits from raw_refresh_limits

Quoted 21 lines · Tom Yan
Quoted 20 lines · Maxim Levitsky

From: Tom Yan <[email protected]>

We can and should get max transfer length and max segments for all host devices / cdroms (on Linux).

Also use MIN_NON_ZERO instead when we clamp max transfer length against max segments.

---
 block/file-posix.c | 59 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 16 deletions(-)
block/file-posix.c +0 -0
index d5fd1dbcd2..226ddbbdad 100644
@@ -1162,6 +1162,12 @@ static void raw_reopen_abort(BDRVReopenState *state)
 
Quoted 9 lines

block/file-posix.c static void raw_reopen_abort(BDRVReopenState *state) · line 1169

Quoted 7 lines
block/file-posix.c +5 -0
 static int sg_get_max_transfer_length(int fd)
 {
+    /*
+     * BLKSECTGET for /dev/sg* character devices incorrectly returns
+     * the max transfer size in bytes (rather than in blocks).
+     * Also note that /dev/sg* doesn't support BLKSSZGET ioctl.
+     */

The second statement should be removed. Also maybe it's better to have the first one right above the line return max_bytes;.

Done, thanks.

Best regards,
Maxim Levitsky

Quoted 92 lines
Quoted 92 lines
block/file-posix.c +38 -17
+
 #ifdef BLKSECTGET
     int max_bytes = 0;
 
@@ -1175,7 +1181,22 @@ static int sg_get_max_transfer_length(int fd)
 #endif
 }
 
-static int sg_get_max_segments(int fd)
+static int get_max_transfer_length(int fd)
+{
+#if defined(BLKSECTGET)
+    int sect = 0;
+
+    if (ioctl(fd, BLKSECTGET, &sect) == 0) {
+        return sect << 9;
+    } else {
+        return -errno;
+    }
+#else
+    return -ENOSYS;
+#endif
+}
+
+static int get_max_segments(int fd)
 {
 #ifdef CONFIG_LINUX
     char buf[32];
@@ -1230,23 +1251,29 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
 {
     BDRVRawState *s = bs->opaque;
 
-    if (bs->sg) {
-        int ret = sg_get_max_transfer_length(s->fd);
+    raw_probe_alignment(bs, s->fd, errp);
+    bs->bl.min_mem_alignment = s->buf_align;
+    bs->bl.opt_mem_alignment = MAX(s->buf_align, qemu_real_host_page_size);
+}
 
-        if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
-            bs->bl.max_transfer = pow2floor(ret);
-        }
+static void hdev_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+    BDRVRawState *s = bs->opaque;
 
-        ret = sg_get_max_segments(s->fd);
-        if (ret > 0) {
-            bs->bl.max_transfer = MIN(bs->bl.max_transfer,
-                                      ret * qemu_real_host_page_size);
-        }
+    int ret = bs->sg ? sg_get_max_transfer_length(s->fd) :
+                       get_max_transfer_length(s->fd);
+
+    if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
+        bs->bl.max_transfer = pow2floor(ret);
     }
 
-    raw_probe_alignment(bs, s->fd, errp);
-    bs->bl.min_mem_alignment = s->buf_align;
-    bs->bl.opt_mem_alignment = MAX(s->buf_align, qemu_real_host_page_size);
+    ret = get_max_segments(s->fd);
+    if (ret > 0) {
+        bs->bl.max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
+                                           ret * qemu_real_host_page_size);
+    }
+
+    raw_refresh_limits(bs, errp);
 }
 
 static int check_for_dasd(int fd)
@@ -3601,7 +3628,7 @@ static BlockDriver bdrv_host_device = {
     .bdrv_co_pdiscard       = hdev_co_pdiscard,
     .bdrv_co_copy_range_from = raw_co_copy_range_from,
     .bdrv_co_copy_range_to  = raw_co_copy_range_to,
-    .bdrv_refresh_limits = raw_refresh_limits,
+    .bdrv_refresh_limits = hdev_refresh_limits,
     .bdrv_io_plug = raw_aio_plug,
     .bdrv_io_unplug = raw_aio_unplug,
     .bdrv_attach_aio_context = raw_aio_attach_aio_context,
@@ -3725,7 +3752,7 @@ static BlockDriver bdrv_host_cdrom = {
     .bdrv_co_preadv         = raw_co_preadv,
     .bdrv_co_pwritev        = raw_co_pwritev,
     .bdrv_co_flush_to_disk  = raw_co_flush_to_disk,
-    .bdrv_refresh_limits = raw_refresh_limits,
+    .bdrv_refresh_limits = hdev_refresh_limits,
     .bdrv_io_plug = raw_aio_plug,
     .bdrv_io_unplug = raw_aio_unplug,
     .bdrv_attach_aio_context = raw_aio_attach_aio_context,
--

2.26.2

#4 lore raw

PATCH v2 2/5 file-posix: add sg_get_max_segments that actually works with sg

In reply to Maxim Levitsky

From: Tom Yan <[email protected]>

sg devices have different major/minor than their corresponding block devices. Using sysfs to get max segments never really worked for them.

Fortunately the sg driver provides an ioctl to get sg_tablesize, which is apparently equivalent to max segments.

---
 block/file-posix.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
block/file-posix.c +21 -1
index 226ddbbdad..10ebc4c5b7 100644
@@ -1181,6 +1181,26 @@ static int sg_get_max_transfer_length(int fd)
 #endif
 }
 
+static int sg_get_max_segments(int fd)
+{
+    /*
+     * /dev/sg* character devices report 'max_segments' via
+     * SG_GET_SG_TABLESIZE ioctl
+     */
+
+#ifdef SG_GET_SG_TABLESIZE
+    long max_segments = 0;
+
+    if (ioctl(fd, SG_GET_SG_TABLESIZE, &max_segments) == 0) {
+        return max_segments;
+    } else {
+        return -errno;
+    }
+#else
+    return -ENOSYS;
+#endif
+}
+
 static int get_max_transfer_length(int fd)
 {
 #if defined(BLKSECTGET)
@@ -1267,7 +1287,7 @@ static void hdev_refresh_limits(BlockDriverState *bs, Error **errp)
         bs->bl.max_transfer = pow2floor(ret);
     }
 
-    ret = get_max_segments(s->fd);
+    ret = bs->sg ? sg_get_max_segments(s->fd) : get_max_segments(s->fd);
     if (ret > 0) {
         bs->bl.max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
                                            ret * qemu_real_host_page_size);
Signature · 1 line
2.26.2
#5 lore raw

PATCH v2 3/5 block: add max_ioctl_transfer to BlockLimits

In reply to Maxim Levitsky

Maximum transfer size when accessing a kernel block device is only relevant when using SCSI passthrough (SG_IO ioctl) since only in this case the requests are passed directly to underlying hardware with no pre-processing. Same is true when using /dev/sg* character devices (which only support SG_IO)

Therefore split the block driver's advertized max transfer size by the regular max transfer size, and the max transfer size for SCSI passthrough (the new max_ioctl_transfer field)

In the next patch, the qemu block drivers that support SCSI passthrough will set the max_ioctl_transfer field, and simultaneously, the block devices that implement scsi passthrough will switch to 'blk_get_max_ioctl_transfer' to query and to pass it to the guest.

---
 block/block-backend.c          | 12 ++++++++++++
 block/io.c                     |  2 ++
 include/block/block_int.h      |  4 ++++
 include/sysemu/block-backend.h |  1 +
 4 files changed, 19 insertions(+)
block/block-backend.c +12 -0
index ce78d30794..c1d149a755 100644
@@ -1938,6 +1938,18 @@ uint32_t blk_get_max_transfer(BlockBackend *blk)
     return MIN_NON_ZERO(max, INT_MAX);
 }
 
+/* Returns the maximum transfer length, for SCSI passthrough */
+uint32_t blk_get_max_ioctl_transfer(BlockBackend *blk)
+{
+    BlockDriverState *bs = blk_bs(blk);
+    uint32_t max = 0;
+
+    if (bs) {
+        max = bs->bl.max_ioctl_transfer;
+    }
+    return MIN_NON_ZERO(max, INT_MAX);
+}
+
 int blk_get_max_iov(BlockBackend *blk)
 {
     return blk->root->bs->bl.max_iov;
block/io.c +2 -0
index ec5e152bb7..3eae176992 100644
@@ -126,6 +126,8 @@ static void bdrv_merge_limits(BlockLimits *dst, const BlockLimits *src)
 {
     dst->opt_transfer = MAX(dst->opt_transfer, src->opt_transfer);
     dst->max_transfer = MIN_NON_ZERO(dst->max_transfer, src->max_transfer);
+    dst->max_ioctl_transfer = MIN_NON_ZERO(dst->max_ioctl_transfer,
+                                        src->max_ioctl_transfer);
     dst->opt_mem_alignment = MAX(dst->opt_mem_alignment,
                                  src->opt_mem_alignment);
     dst->min_mem_alignment = MAX(dst->min_mem_alignment,
include/block/block_int.h +4 -0
index 95d9333be1..e9874c8c23 100644
@@ -678,6 +678,10 @@ typedef struct BlockLimits {
      * clamped down. */
     uint32_t max_transfer;
 
+    /* Maximal transfer length for SCSI passthrough (ioctl interface) */
+    uint32_t max_ioctl_transfer;
+
+
     /* memory alignment, in bytes so that no bounce buffer is needed */
     size_t min_mem_alignment;
 
include/sysemu/block-backend.h +1 -0
index 8203d7f6f9..b019a37b7a 100644
@@ -203,6 +203,7 @@ void blk_eject(BlockBackend *blk, bool eject_flag);
 int blk_get_flags(BlockBackend *blk);
 uint32_t blk_get_request_alignment(BlockBackend *blk);
 uint32_t blk_get_max_transfer(BlockBackend *blk);
+uint32_t blk_get_max_ioctl_transfer(BlockBackend *blk);
 int blk_get_max_iov(BlockBackend *blk);
 void blk_set_guest_block_size(BlockBackend *blk, int align);
 void *blk_try_blockalign(BlockBackend *blk, size_t size);
Signature · 1 line
2.26.2
#6 lore raw

PATCH v2 4/5 block: use blk_get_max_ioctl_transfer for SCSI passthrough

In reply to Maxim Levitsky

Switch file-posix to expose only the max_ioctl_transfer limit.

Let the iscsi driver work as it did before since it is bound by the transfer limit in both regular read/write and in SCSI passthrough case.

Switch the scsi-disk and scsi-block drivers to read the SG max transfer limits using the new blk_get_max_ioctl_transfer interface.

Fixes 867eccfed8 ("file-posix: Use max transfer length/segment count only for SCSI passthrough")
---
 block/file-posix.c     | 4 ++--
 block/iscsi.c          | 1 +
 hw/scsi/scsi-generic.c | 4 ++--
 3 files changed, 5 insertions(+), 4 deletions(-)
block/file-posix.c +2 -2
index 10ebc4c5b7..0a94211847 100644
@@ -1284,12 +1284,12 @@ static void hdev_refresh_limits(BlockDriverState *bs, Error **errp)
                        get_max_transfer_length(s->fd);
 
     if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
-        bs->bl.max_transfer = pow2floor(ret);
+        bs->bl.max_ioctl_transfer = pow2floor(ret);
     }
 
     ret = bs->sg ? sg_get_max_segments(s->fd) : get_max_segments(s->fd);
     if (ret > 0) {
-        bs->bl.max_transfer = MIN_NON_ZERO(bs->bl.max_transfer,
+        bs->bl.max_ioctl_transfer = MIN_NON_ZERO(bs->bl.max_ioctl_transfer,
                                            ret * qemu_real_host_page_size);
     }
 
block/iscsi.c +1 -0
index e30a7e3606..3685da2971 100644
@@ -2065,6 +2065,7 @@ static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
 
     if (max_xfer_len * block_size < INT_MAX) {
         bs->bl.max_transfer = max_xfer_len * iscsilun->block_size;
+        bs->bl.max_ioctl_transfer = bs->bl.max_transfer;
     }
 
     if (iscsilun->lbp.lbpu) {
hw/scsi/scsi-generic.c +2 -2
index 2cb23ca891..6df67bf889 100644
@@ -167,7 +167,7 @@ static void scsi_handle_inquiry_reply(SCSIGenericReq *r, SCSIDevice *s)
         page = r->req.cmd.buf[2];
         if (page == 0xb0) {
             uint32_t max_transfer =
-                blk_get_max_transfer(s->conf.blk) / s->blocksize;
+                blk_get_max_ioctl_transfer(s->conf.blk) / s->blocksize;
 
             assert(max_transfer);
             stl_be_p(&r->buf[8], max_transfer);
@@ -210,7 +210,7 @@ static int scsi_generic_emulate_block_limits(SCSIGenericReq *r, SCSIDevice *s)
     uint8_t buf[64];
 
     SCSIBlockLimits bl = {
-        .max_io_sectors = blk_get_max_transfer(s->conf.blk) / s->blocksize
+        .max_io_sectors = blk_get_max_ioctl_transfer(s->conf.blk) / s->blocksize
     };
 
     memset(r->buf, 0, r->buflen);
Signature · 1 line
2.26.2
#7 lore raw

PATCH v2 5/5 block/scsi: correctly emulate the VPD block limits page

In reply to Maxim Levitsky

When the device doesn't support the VPD block limits page, we emulate it even for SCSI passthrough.

As a part of the emulation we need to add it to the 'Supported VPD Pages'

The code that does this adds it to the page, but it doesn't increase the length of the data to be copied to the guest, thus the guest never sees the VPD block limits page as supported.

Bump the transfer size by 1 in this case.

---
 hw/scsi/scsi-generic.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
hw/scsi/scsi-generic.c +6 -2
index 6df67bf889..4354469841 100644
@@ -134,7 +134,7 @@ static int execute_command(BlockBackend *blk,
     return 0;
 }
 
-static void scsi_handle_inquiry_reply(SCSIGenericReq *r, SCSIDevice *s)
+static int scsi_handle_inquiry_reply(SCSIGenericReq *r, SCSIDevice *s, int len)
 {
     uint8_t page, page_idx;
 
@@ -200,8 +200,12 @@ static void scsi_handle_inquiry_reply(SCSIGenericReq *r, SCSIDevice *s)
                 r->buf[page_idx] = 0xb0;
             }
             stw_be_p(r->buf + 2, lduw_be_p(r->buf + 2) + 1);
+
+            if (len < r->buflen)
+                len++;
         }
     }
+    return len;
 }
 
 static int scsi_generic_emulate_block_limits(SCSIGenericReq *r, SCSIDevice *s)
@@ -316,7 +320,7 @@ static void scsi_read_complete(void * opaque, int ret)
         }
     }
     if (r->req.cmd.buf[0] == INQUIRY) {
-        scsi_handle_inquiry_reply(r, s);
+        len = scsi_handle_inquiry_reply(r, s, len);
     }
 
 req_complete:
Signature · 1 line
2.26.2
#8 lore raw
In reply to Maxim Levitsky
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Type: series
Message-id: [email protected]
Subject: [PATCH v2 0/5] SCSI: fix transfer limits for SCSI passthrough

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
77c9000 block/scsi: correctly emulate the VPD block limits page 61f49e1 block: use blk_get_max_ioctl_transfer for SCSI passthrough 35c66d6 block: add max_ioctl_transfer to BlockLimits
08ba263 file-posix: add sg_get_max_segments that actually works with sg e9fd749 file-posix: split hdev_refresh_limits from raw_refresh_limits

=== OUTPUT BEGIN ===
1/5 Checking commit e9fd7498060c (file-posix: split hdev_refresh_limits from raw_refresh_limits) 2/5 Checking commit 08ba263f565d (file-posix: add sg_get_max_segments that actually works with sg) 3/5 Checking commit 35c66d636d83 (block: add max_ioctl_transfer to BlockLimits) 4/5 Checking commit 61f49e1c953b (block: use blk_get_max_ioctl_transfer for SCSI passthrough) 5/5 Checking commit 77c9000b7c30 (block/scsi: correctly emulate the VPD block limits page)
ERROR: braces {} are necessary for all arms of this statement
#39: FILE: hw/scsi/scsi-generic.c:204:
+ if (len < r->buflen)
[...]

total: 1 errors, 0 warnings, 28 lines checked

Patch 5/5 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.

=== OUTPUT END ===

Test command exited with code: 1

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

#9 lore raw
Quoted 32 lines · On Wed, 2020-12-09 at 06:03 -0800, [email protected] wrote:

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Type: series
Message-id: [email protected]
Subject: [PATCH v2 0/5] SCSI: fix transfer limits for SCSI passthrough

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
77c9000 block/scsi: correctly emulate the VPD block limits page 61f49e1 block: use blk_get_max_ioctl_transfer for SCSI passthrough 35c66d6 block: add max_ioctl_transfer to BlockLimits
08ba263 file-posix: add sg_get_max_segments that actually works with sg e9fd749 file-posix: split hdev_refresh_limits from raw_refresh_limits

Quoted 9 lines

=== OUTPUT BEGIN ===
1/5 Checking commit e9fd7498060c (file-posix: split hdev_refresh_limits from raw_refresh_limits) 2/5 Checking commit 08ba263f565d (file-posix: add sg_get_max_segments that actually works with sg) 3/5 Checking commit 35c66d636d83 (block: add max_ioctl_transfer to BlockLimits) 4/5 Checking commit 61f49e1c953b (block: use blk_get_max_ioctl_transfer for SCSI passthrough) 5/5 Checking commit 77c9000b7c30 (block/scsi: correctly emulate the VPD block limits page)
ERROR: braces {} are necessary for all arms of this statement
#39: FILE: hw/scsi/scsi-generic.c:204:
+ if (len < r->buflen)

+1 Good bot :-)

Best regards,
Maxim Levitsky

Quoted 18 lines

[...]

total: 1 errors, 0 warnings, 28 lines checked

Patch 5/5 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.

=== OUTPUT END ===

Test command exited with code: 1

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

#10 lore raw
In reply to [email protected]
Quoted 51 lines · On 09/12/20 15:03, [email protected] wrote:

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Type: series
Message-id: [email protected]
Subject: [PATCH v2 0/5] SCSI: fix transfer limits for SCSI passthrough

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
77c9000 block/scsi: correctly emulate the VPD block limits page 61f49e1 block: use blk_get_max_ioctl_transfer for SCSI passthrough 35c66d6 block: add max_ioctl_transfer to BlockLimits
08ba263 file-posix: add sg_get_max_segments that actually works with sg e9fd749 file-posix: split hdev_refresh_limits from raw_refresh_limits

=== OUTPUT BEGIN ===
1/5 Checking commit e9fd7498060c (file-posix: split hdev_refresh_limits from raw_refresh_limits) 2/5 Checking commit 08ba263f565d (file-posix: add sg_get_max_segments that actually works with sg) 3/5 Checking commit 35c66d636d83 (block: add max_ioctl_transfer to BlockLimits) 4/5 Checking commit 61f49e1c953b (block: use blk_get_max_ioctl_transfer for SCSI passthrough) 5/5 Checking commit 77c9000b7c30 (block/scsi: correctly emulate the VPD block limits page)
ERROR: braces {} are necessary for all arms of this statement
#39: FILE: hw/scsi/scsi-generic.c:204:
+ if (len < r->buflen)
[...]

total: 1 errors, 0 warnings, 28 lines checked

Patch 5/5 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.

=== OUTPUT END ===

Quoted 9 lines

Test command exited with code: 1

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

Time for v3?

Paolo

#11 lore raw
Quoted 55 lines · Paolo Bonzini
Quoted 54 lines · On 09/12/20 15:03, [email protected] wrote:

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Type: series
Message-id: [email protected]
Subject: [PATCH v2 0/5] SCSI: fix transfer limits for SCSI passthrough

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
77c9000 block/scsi: correctly emulate the VPD block limits page 61f49e1 block: use blk_get_max_ioctl_transfer for SCSI passthrough 35c66d6 block: add max_ioctl_transfer to BlockLimits
08ba263 file-posix: add sg_get_max_segments that actually works with sg e9fd749 file-posix: split hdev_refresh_limits from raw_refresh_limits

=== OUTPUT BEGIN ===
1/5 Checking commit e9fd7498060c (file-posix: split hdev_refresh_limits from raw_refresh_limits) 2/5 Checking commit 08ba263f565d (file-posix: add sg_get_max_segments that actually works with sg) 3/5 Checking commit 35c66d636d83 (block: add max_ioctl_transfer to BlockLimits) 4/5 Checking commit 61f49e1c953b (block: use blk_get_max_ioctl_transfer for SCSI passthrough) 5/5 Checking commit 77c9000b7c30 (block/scsi: correctly emulate the VPD block limits page)
ERROR: braces {} are necessary for all arms of this statement
#39: FILE: hw/scsi/scsi-generic.c:204:
+ if (len < r->buflen)
[...]

total: 1 errors, 0 warnings, 28 lines checked

Patch 5/5 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.

=== OUTPUT END ===

Test command exited with code: 1

Quoted 8 lines
Quoted 6 lines

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

Time for v3?

I am waiting a bit to see if anything else pops up, to avoid doing too much noise.

Best regards,
Maxim Levitsky

Quoted 3 lines

Paolo