BPi M2 Zero poweroff support via new regulator-poweroff driver
v4 cover BPi M2 Zero poweroff support via new regulator-poweroff driver
Changes in v2:
- rename DT node
Changes in v3:
- add regulator-poweroff driver
- use regulator-poweroff driver instead of gpio-poweroff
Changes in v4:
- hardcode poweroff timeout to 3000ms, not configurable any more
- remove support for multiple regulators
- fix Documentation issues
Michael Klein (3):
power: reset: new driver regulator-poweroff
Documentation: DT: binding documentation for regulator-poweroff
ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff node
.../power/reset/regulator-poweroff.yaml | 37 ++++++++ .../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 5 ++ drivers/power/reset/Kconfig | 7 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/regulator-poweroff.c | 86 +++++++++++++++++++ 5 files changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml create mode 100644 drivers/power/reset/regulator-poweroff.c
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v4 1/3 power: reset: new driver regulator-poweroff
This driver registers a pm_power_off function to disable a set of regulators defined in the devicetree to turn off the board.
--- drivers/power/reset/Kconfig | 7 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/regulator-poweroff.c | 86 ++++++++++++++++++++++++ 3 files changed, 94 insertions(+) create mode 100644 drivers/power/reset/regulator-poweroff.c
drivers/power/reset/Kconfig +7 -0
@@ -177,6 +177,13 @@ config POWER_RESET_QNAP Say Y if you have a QNAP NAS. +config POWER_RESET_REGULATOR + bool "Regulator subsystem power-off driver" + depends on OF && REGULATOR + help + This driver supports turning off your board by disabling a + power regulator defined in the devicetree. + config POWER_RESET_RESTART bool "Restart power-off driver" help
drivers/power/reset/Makefile +1 -0
@@ -19,6 +19,7 @@ obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o +obj-$(CONFIG_POWER_RESET_REGULATOR) += regulator-poweroff.o obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o obj-$(CONFIG_POWER_RESET_ST) += st-poweroff.o obj-$(CONFIG_POWER_RESET_VERSATILE) += arm-versatile-reboot.o
drivers/power/reset/regulator-poweroff.c new file +86 -0
86 lines not on this page · raw message
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v4 2/3 Documentation: DT: binding documentation for regulator-poweroff
In reply to Michael KleinAdd devicetree binding documentation for regulator-poweroff driver.
--- .../power/reset/regulator-poweroff.yaml | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml new file +37 -0
@@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/regulator-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Force-disable power regulator to turn the power off. + +maintainers: + - Michael Klein <[email protected]> + +description: | + When the power-off handler is called, a power regulator is disabled by + calling regulator_force_disable(). If the power is still on and the + CPU still running after a 3000ms delay, a warning is emitted. + +properties: + compatible: + const: "regulator-poweroff" + + power-supply: + description: + regulator to disable on power-down + +required: + - compatible + - power-supply + +additionalProperties: false + +examples: + - | + regulator-poweroff { + compatible = "regulator-poweroff"; + power-supply = <®_vcc1v2>; + }; +...
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v4 2/3] Documentation: DT: binding documentation for regulator-poweroff
Quoted 8 lines · Michael Klein
Add devicetree binding documentation for regulator-poweroff driver.
Signed-off-by Michael Klein <[email protected]>--- .../power/reset/regulator-poweroff.yaml | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
PATCH v4 3/3 ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff node
In reply to Michael KleinAdd add devicetree information for the regulator-poweroff driver.
---
This patch depends on the regulator names added in
arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +5 -0
@@ -86,6 +86,11 @@ reg_vcc1v2: vcc1v2 { vin-supply = <®_vcc5v0>; }; + poweroff { + compatible = "regulator-poweroff"; + power-supply = <®_vcc1v2>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
Signature · 7 lines
2.29.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel