Skip to contentSkip to conversation

arm64: dts: broadcom: bcm4908: describe PCIe reset controller

PATCH Applied Rafał Miłecki 2 participants 2 messages Dec 10, 2020 – Dec 11, 2020 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: broadcom: bcm4908: describe PCIe reset controller

From: Rafał Miłecki <[email protected]>

This reset controller is a single register in the Broadcom's MISC block.

---
This binding got documented in the commit a269adab36d7 ("reset: simple: add BCM4908 MISC PCIe reset controller support") that sits currently in the
git://git.pengutronix.de/git/pza/linux reset/next

---
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +15 -0
index 55d9b56ac749..b5b772a9a51b 100644
@@ -177,6 +177,21 @@ nandcs: nandcs@0 {
 			};
 		};
 
+		misc@2600 {
+			compatible = "brcm,misc", "simple-mfd";
+			reg = <0x2600 0xe4>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00 0x2600 0xe4>;
+
+			reset-controller@2644 {
+				compatible = "brcm,bcm4908-misc-pcie-reset";
+				reg = <0x44 0x04>;
+				#reset-cells = <1>;
+			};
+		};
+
 		reboot {
 			compatible = "syscon-reboot";
 			regmap = <&timer>;
Signature · 7 lines
2.26.2


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel