usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
Subsystems (3)
Badhri Jagan Sridharan
maintainerPATCH 1/1 usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
Auto discharge circuits kick in only when vbus decays and reaches VBUS_SINK_DISCONNECT_THRESHOLD threshold. Enable bleed discharge to discharge vbus to VBUS_SINK_DISCONNECT_THRESHOLD upon disconnect.
Signed-off-by Badhri Jagan Sridharan <[email protected]>
--- drivers/usb/typec/tcpm/tcpci.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/typec/tcpm/tcpci.c +2 -0
@@ -725,6 +725,8 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge; tcpci->tcpc.set_auto_vbus_discharge_threshold = tcpci_set_auto_vbus_discharge_threshold; +regmap_update_bits (tcpci->regmap,TCPC_POWER_CTRL ,TCPC_POWER_CTRL_BLEED_DISCHARGE , +TCPC_POWER_CTRL_BLEED_DISCHARGE ); }if (tcpci->data->vbus_vsafe0v)
Signature · 1 line
2.29.2.576.ga3fc446d84-goog
Quoted 5 lines · Badhri Jagan Sridharan
Auto discharge circuits kick in only when vbus decays and reaches
VBUS_SINK_DISCONNECT_THRESHOLDthreshold. Enable bleed discharge to discharge vbus toVBUS_SINK_DISCONNECT_THRESHOLDupon disconnect.Signed-off-by Badhri Jagan Sridharan <[email protected]>
Reviewed-by Heikki Krogerus <[email protected]>
Quoted 19 lines
--- drivers/usb/typec/tcpm/tcpci.c | 2 ++ 1 file changed, 2 insertions(+)drivers/usb/typec/tcpm/tcpci.c +2
-0@@ -725,6 +725,8 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge; tcpci->tcpc.set_auto_vbus_discharge_threshold = tcpci_set_auto_vbus_discharge_threshold; +regmap_update_bits (tcpci->regmap,TCPC_POWER_CTRL ,TCPC_POWER_CTRL_BLEED_DISCHARGE , +TCPC_POWER_CTRL_BLEED_DISCHARGE ); }if (tcpci->data->vbus_vsafe0v)Signature · 1 line
2.29.2.576.ga3fc446d84-goog
Signature · 1 line
heikki
Quoted 5 lines · Badhri Jagan Sridharan
Auto discharge circuits kick in only when vbus decays and reaches
VBUS_SINK_DISCONNECT_THRESHOLDthreshold. Enable bleed discharge to discharge vbus toVBUS_SINK_DISCONNECT_THRESHOLDupon disconnect.Signed-off-by Badhri Jagan Sridharan <[email protected]>
Reviewed-by Guenter Roeck <[email protected]>
Quoted 18 lines
--- drivers/usb/typec/tcpm/tcpci.c | 2 ++ 1 file changed, 2 insertions(+)drivers/usb/typec/tcpm/tcpci.c +2
-0@@ -725,6 +725,8 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge; tcpci->tcpc.set_auto_vbus_discharge_threshold = tcpci_set_auto_vbus_discharge_threshold; +regmap_update_bits (tcpci->regmap,TCPC_POWER_CTRL ,TCPC_POWER_CTRL_BLEED_DISCHARGE , +TCPC_POWER_CTRL_BLEED_DISCHARGE ); }if (tcpci->data->vbus_vsafe0v)