Address issues with PDF output at media uAPI docs

index ed2b43ec7754..66e121df59cd 100644
@@ -375,9 +375,10 @@ if cjk_cmd.find("Noto Sans CJK SC") >= 0:
 if major == 1 and minor > 3:
     latex_elements['preamble']  += '\\renewcommand*{\\DUrole}[2]{ #2 }\n'
 
+# Set page margins
 if major == 1 and minor <= 4:
     latex_elements['preamble']  += '\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}'
-elif major == 1 and (minor > 5 or (minor == 5 and patch >= 3)):
+elif (major == 1 and (minor > 5 or (minor == 5 and patch >= 3))) or (major > 1):
     latex_elements['sphinxsetup'] = 'hmargin=0.5in, vmargin=1in'
     latex_elements['preamble']  += '\\fvset{fontsize=auto}\n'
 

index 61a7310b49e0..c3c8fb10f94e 100644
@@ -115,6 +115,10 @@ pdfdocs: latexdocs
 
 endif # HAVE_PDFLATEX
 
+rst2pdf:
+	@$(srctree)/scripts/sphinx-pre-install --version-check
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,pdf,$(var),pdf,$(var)))
+
 epubdocs:
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))

@@ -140,6 +144,7 @@ dochelp:
 	@echo  '  htmldocs        - HTML'
 	@echo  '  latexdocs       - LaTeX'
 	@echo  '  pdfdocs         - PDF'
+	@echo  '  rst2pdf         - PDF, using experimental rst2pdf support'
 	@echo  '  epubdocs        - EPUB'
 	@echo  '  xmldocs         - XML'
 	@echo  '  linkcheckdocs   - check for broken external links'

index 66e121df59cd..6f2788aac81e 100644
@@ -123,6 +123,12 @@ if (major == 1 and minor > 3) or (major > 1):
 else:
     extensions.append("sphinx.ext.pngmath")
 
+# Enable experimental rst2pdf, if available
+try:
+    extensions.append("rst2pdf.pdfbuilder")
+except:
+    sys.stderr.write('rst2pdf extension not available.\n')
+
 # Add any paths that contain templates here, relative to this directory.
 templates_path = ['_templates']
 

@@ -614,12 +620,15 @@ epub_exclude_files = ['search.html']
 #
 # See the Sphinx chapter of https://ralsina.me/static/manual.pdf
 #
-# FIXME: Do not add the index file here; the result will be too big. Adding
-# multiple PDF files here actually tries to get the cross-referencing right
-# *between* PDF files.
-pdf_documents = [
-    ('kernel-documentation', u'Kernel', u'Kernel', u'J. Random Bozo'),
-]
+
+# Add all LaTeX files to PDF documents as well
+pdf_documents = []
+for l in latex_documents:
+    doc = l[0]
+    fn = l[1].replace(".tex", "")
+    name = l[2]
+    authors = l[3]
+    pdf_documents.append((doc, fn, name, authors))
 
 # kernel-doc extension configuration for running Sphinx directly (e.g. by Read
 # the Docs). In a normal build, these are supplied from the Makefile via command

index 81a4a1a53bce..8c6b3ac4ecb0 100644
@@ -59,6 +59,7 @@ all: $(IMGDOT) $(BUILDDIR) ${TARGETS}
 html: all
 epub: all
 xml: all
+pdf: all
 latex: $(IMGPDF) all
 linkcheck:
 

index 43ecedeb3f02..db4043578eec 100644
@@ -264,7 +264,7 @@ no-dot-config-targets := $(clean-targets) \
 			 cscope gtags TAGS tags help% %docs check% coccicheck \
 			 $(version_h) headers headers_% archheaders archscripts \
 			 %asm-generic kernelversion %src-pkg dt_binding_check \
-			 outputmakefile
+			 outputmakefile rst2pdf
 no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease
 single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/
 

@@ -1654,7 +1654,7 @@ $(help-board-dirs): help-%:
 
 # Documentation targets
 # ---------------------------------------------------------------------------
-DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
+DOC_TARGETS := xmldocs latexdocs pdfdocs rst2pdf htmldocs epubdocs cleandocs \
 	       linkcheckdocs dochelp refcheckdocs
 PHONY += $(DOC_TARGETS)
 $(DOC_TARGETS):

index 61a7310b49e0..c3c8fb10f94e 100644
@@ -115,6 +115,10 @@ pdfdocs: latexdocs
 
 endif # HAVE_PDFLATEX
 
+rst2pdf:
+	@$(srctree)/scripts/sphinx-pre-install --version-check
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,pdf,$(var),pdf,$(var)))
+
 epubdocs:
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))

@@ -140,6 +144,7 @@ dochelp:
 	@echo  '  htmldocs        - HTML'
 	@echo  '  latexdocs       - LaTeX'
 	@echo  '  pdfdocs         - PDF'
+	@echo  '  rst2pdf         - PDF, using experimental rst2pdf support'
 	@echo  '  epubdocs        - EPUB'
 	@echo  '  xmldocs         - XML'
 	@echo  '  linkcheckdocs   - check for broken external links'

index 66e121df59cd..6f2788aac81e 100644
@@ -123,6 +123,12 @@ if (major == 1 and minor > 3) or (major > 1):
 else:
     extensions.append("sphinx.ext.pngmath")
 
+# Enable experimental rst2pdf, if available
+try:
+    extensions.append("rst2pdf.pdfbuilder")
+except:
+    sys.stderr.write('rst2pdf extension not available.\n')
+
 # Add any paths that contain templates here, relative to this directory.
 templates_path = ['_templates']
 

@@ -614,12 +620,15 @@ epub_exclude_files = ['search.html']
 #
 # See the Sphinx chapter of https://ralsina.me/static/manual.pdf
 #
-# FIXME: Do not add the index file here; the result will be too big. Adding
-# multiple PDF files here actually tries to get the cross-referencing right
-# *between* PDF files.
-pdf_documents = [
-    ('kernel-documentation', u'Kernel', u'Kernel', u'J. Random Bozo'),
-]
+
+# Add all LaTeX files to PDF documents as well
+pdf_documents = []
+for l in latex_documents:
+    doc = l[0]
+    fn = l[1].replace(".tex", "")
+    name = l[2]
+    authors = l[3]
+    pdf_documents.append((doc, fn, name, authors))
 
 # kernel-doc extension configuration for running Sphinx directly (e.g. by Read
 # the Docs). In a normal build, these are supplied from the Makefile via command

index eeb394b39e2c..8266afd438aa 100644
@@ -43,6 +43,18 @@ def loadConfig(namespace):
 
             namespace['latex_documents'] = new_latex_docs
 
+            new_pdf_docs = []
+            pdf_documents = namespace['pdf_documents']
+
+            for l in pdf_documents:
+                if l[0].find(dir + '/') == 0:
+                    has = True
+                    fn = l[0][len(dir) + 1:]
+                    new_pdf_docs.append((fn, l[1], l[2], l[3]))
+                    break
+
+            namespace['pdf_documents'] = new_pdf_docs
+
         # If there is an extra conf.py file, load it
         if os.path.isfile(config_file):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)

index 81a4a1a53bce..8c6b3ac4ecb0 100644
@@ -59,6 +59,7 @@ all: $(IMGDOT) $(BUILDDIR) ${TARGETS}
 html: all
 epub: all
 xml: all
+pdf: all
 latex: $(IMGPDF) all
 linkcheck:
 

index 43ecedeb3f02..db4043578eec 100644
@@ -264,7 +264,7 @@ no-dot-config-targets := $(clean-targets) \
 			 cscope gtags TAGS tags help% %docs check% coccicheck \
 			 $(version_h) headers headers_% archheaders archscripts \
 			 %asm-generic kernelversion %src-pkg dt_binding_check \
-			 outputmakefile
+			 outputmakefile rst2pdf
 no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease
 single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/
 

@@ -1654,7 +1654,7 @@ $(help-board-dirs): help-%:
 
 # Documentation targets
 # ---------------------------------------------------------------------------
-DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
+DOC_TARGETS := xmldocs latexdocs pdfdocs rst2pdf htmldocs epubdocs cleandocs \
 	       linkcheckdocs dochelp refcheckdocs
 PHONY += $(DOC_TARGETS)
 $(DOC_TARGETS):

index 126f66482a0d..26a4ace42ca5 100644
@@ -17,10 +17,6 @@ PAL and by SDTV in general. The default transfer function is
 range. The chromaticities of the primary colors and the white reference
 are:
 
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: SMPTE 170M Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -98,10 +94,6 @@ default Y'CbCr encoding is ``V4L2_YCBCR_ENC_709``. The default Y'CbCr
 quantization is limited range. The chromaticities of the primary colors
 and the white reference are:
 
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: Rec. 709 Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -225,10 +217,6 @@ would break how applications interpret the quantization range.
 
 The chromaticities of the primary colors and the white reference are:
 
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: sRGB Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -308,9 +296,6 @@ would break how applications interpret the quantization range.
 
 The chromaticities of the primary colors and the white reference are:
 
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: opRGB Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -373,10 +358,6 @@ definition television (UHDTV). The default transfer function is
 ``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range.
 The chromaticities of the primary colors and the white reference are:
 
-
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: BT.2020 Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -478,9 +459,6 @@ is ``V4L2_XFER_FUNC_DCI_P3``. The default Y'CbCr encoding is
 The chromaticities of the primary colors and the white reference are:
 
 
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: DCI-P3 Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -532,9 +510,6 @@ quantization is limited range. The chromaticities of the primary colors
 and the white reference are:
 
 
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: SMPTE 240M Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -603,9 +578,6 @@ limited range. The chromaticities of the primary colors and the white
 reference are:
 
 
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: NTSC 1953 Chromaticities
     :header-rows:  1
     :stub-columns: 0

@@ -683,9 +655,6 @@ range. The chromaticities of the primary colors and the white reference
 are:
 
 
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: EBU Tech. 3213 Chromaticities
     :header-rows:  1
     :stub-columns: 0

index 4e5652eb6126..ed5154700308 100644
@@ -154,10 +154,13 @@ Control IDs
 ``V4L2_CID_POWER_LINE_FREQUENCY`` ``(enum)``
     Enables a power line frequency filter to avoid flicker. Possible
     values for ``enum v4l2_power_line_frequency`` are:
-    ``V4L2_CID_POWER_LINE_FREQUENCY_DISABLED`` (0),
-    ``V4L2_CID_POWER_LINE_FREQUENCY_50HZ`` (1),
-    ``V4L2_CID_POWER_LINE_FREQUENCY_60HZ`` (2) and
-    ``V4L2_CID_POWER_LINE_FREQUENCY_AUTO`` (3).
+
+    ==========================================  ==
+    ``V4L2_CID_POWER_LINE_FREQUENCY_DISABLED``   0
+    ``V4L2_CID_POWER_LINE_FREQUENCY_50HZ``	 1
+    ``V4L2_CID_POWER_LINE_FREQUENCY_60HZ``	 2
+    ``V4L2_CID_POWER_LINE_FREQUENCY_AUTO``	 3
+    ==========================================  ==
 
 ``V4L2_CID_HUE_AUTO`` ``(boolean)``
     Enables automatic hue control by the device. The effect of setting

index f0df144c9f63..213b736c9b67 100644
@@ -253,13 +253,7 @@ Sliced VBI services
 
 	:ref:`en300294`
       - PAL/SECAM line 23
-      -
-
-	::
-
-	    Byte         0                 1
-		  msb         lsb  msb           lsb
-	     Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
+      -  See :ref:`v4l2-sliced-wss-625-payload` below.
     * - ``V4L2_SLICED_VBI_525``
       - 0x1000
       - :cspan:`2` Set of services applicable to 525 line systems.

@@ -282,6 +276,21 @@ format while i/o is in progress (between a
 :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` call, and after the first
 :c:func:`read()` or :c:func:`write()` call).
 
+.. _v4l2-sliced-wss-625-payload:
+
+V4L2_SLICED_WSS_625 payload
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The payload for ``V4L2_SLICED_WSS_625`` is:
+
+           +-----+------------------+-----------------------+
+	   |Byte |        0         |           1           |
+           +-----+--------+---------+-----------+-----------+
+	   |     | msb    | lsb     | msb       | lsb       |
+           |     +-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+
+	   | Bit |7|6|5|4 | 3|2|1|0 | x|x|13|12 | 11|10|9|8 |
+           +-----+-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+
+
 Reading and writing sliced VBI data
 ===================================
 

index 752f7f5fae73..b3f4dc71bb5d 100644
@@ -162,13 +162,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
 
 	:ref:`itu1119`
       - PAL/SECAM line 23
-      -
-
-	::
-
-	    Byte        0                 1
-		 msb         lsb  msb           lsb
-	    Bit  7 6 5 4 3 2 1 0  x x 13 12 11 10 9
+      - See :ref:`v4l2-sliced-vbi-cap-wss-625-payload` below.
     * - ``V4L2_SLICED_VBI_525``
       - 0x1000
       - :cspan:`2` Set of services applicable to 525 line systems.

@@ -180,6 +174,22 @@ the sliced VBI API is unsupported or ``type`` is invalid.
 
     \normalsize
 
+.. _v4l2-sliced-vbi-cap-wss-625-payload:
+
+V4L2_SLICED_VBI_CAP WSS_625 payload
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The payload for ``V4L2_SLICED_WSS_625`` is:
+
+	    +-----+------------------+-----------------------+
+	    |Byte |        0         |           1           |
+	    +-----+--------+---------+-----------+-----------+
+	    |     | msb    | lsb     | msb       | lsb       |
+	    |     +-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+
+	    | Bit |7|6|5|4 | 3|2|1|0 | x|x|13|12 | 11|10|9|8 |
+	    +-----+-+-+-+--+--+-+-+--+--+-+--+---+---+--+-+--+
+
+
 Return Value
 ============
 

index 01e3b1a3fb99..e1537ffc6eaa 100644
@@ -778,7 +778,7 @@ FWHT Flags
       - Set if this is an I-frame.
     * - ``V4L2_FWHT_FL_COMPONENTS_NUM_MSK``
       - 0x00070000
-      - The number of color components - 1.
+      - The number of color components minus one.
     * - ``V4L2_FWHT_FL_PIXENC_MSK``
       - 0x00180000
       - The mask for the pixel encoding.

index 454ecd9a0f83..08c317ae0910 100644
@@ -972,7 +972,7 @@ enum v4l2_mpeg_video_mpeg4_profile -
     * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE``
       - Simple Scalable profile
     * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY``
-      -
+      - Advanced Coding Efficiency profile
 
 
 

index 08c317ae0910..abf64e5500e0 100644
@@ -2762,47 +2762,21 @@ enum v4l2_mpeg_video_hevc_profile -
 enum v4l2_mpeg_video_hevc_level -
     Selects the desired level for HEVC encoder.
 
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
-      - Level 1.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
-      - Level 2.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
-      - Level 2.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
-      - Level 3.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
-      - Level 3.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
-      - Level 4.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
-      - Level 4.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
-      - Level 5.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
-      - Level 5.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
-      - Level 5.2
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
-      - Level 6.0
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
-      - Level 6.1
-    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
-      - Level 6.2
-
-.. raw:: latex
-
-    \normalsize
-
+==================================	=========
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``	Level 1.0
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``	Level 2.0
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``	Level 2.1
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``	Level 3.0
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``	Level 3.1
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``	Level 4.0
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``	Level 4.1
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``	Level 5.0
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``	Level 5.1
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``	Level 5.2
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``	Level 6.0
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``	Level 6.1
+``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``	Level 6.2
+==================================	=========
 
 ``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)``
     Indicates the number of evenly spaced subintervals, called ticks, within

@@ -2821,24 +2795,10 @@ enum v4l2_mpeg_video_hevc_tier -
     this flag to 1 indicates High tier. High tier is for applications requiring
     high bit rates.
 
-.. raw:: latex
-
-    \footnotesize
-
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
-      - Main tier.
-    * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
-      - High tier.
-
-.. raw:: latex
-
-    \normalsize
+==================================	==========
+``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``	Main tier.
+``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``	High tier.
+==================================	==========
 
 
 ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)``

index e07a2dbcd65d..60f9a09422d6 100644
@@ -64,13 +64,12 @@ JPEG Control IDs
 .. _jpeg-quality-control:
 
 ``V4L2_CID_JPEG_COMPRESSION_QUALITY (integer)``
-    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control determines trade-off
-    between image quality and size. It provides simpler method for
-    applications to control image quality, without a need for direct
-    reconfiguration of luminance and chrominance quantization tables. In
-    cases where a driver uses quantization tables configured directly by
-    an application, using interfaces defined elsewhere,
-    ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by
+    Determines trade-off between image quality and size.
+    It provides simpler method for applications to control image quality,
+    without a need for direct reconfiguration of luminance and chrominance
+    quantization tables. In cases where a driver uses quantization tables
+    configured directly by an application, using interfaces defined
+    elsewhere, ``V4L2_CID_JPEG_COMPRESSION_QUALITY`` control should be set by
     driver to 0.
 
     The value range of this control is driver-specific. Only positive,

index 15f1900cd914..5d4d260db7b5 100644
@@ -9,7 +9,9 @@
 V4L2_PIX_FMT_IPU3_SBGGR10 ('ip3b'), V4L2_PIX_FMT_IPU3_SGBRG10 ('ip3g'), V4L2_PIX_FMT_IPU3_SGRBG10 ('ip3G'), V4L2_PIX_FMT_IPU3_SRGGB10 ('ip3r')
 **********************************************************************************************************************************************
 
+====================
 10-bit Bayer formats
+====================
 
 Description
 ===========

index 7e5d45f30cab..4f5120a6c678 100644
@@ -11,7 +11,9 @@ V4L2_PIX_FMT_SRGGB14 ('RG14'), V4L2_PIX_FMT_SGRBG14 ('GR14'), V4L2_PIX_FMT_SGBRG
 ***************************************************************************************************************************
 
 
+========================================
 14-bit Bayer formats expanded to 16 bits
+========================================
 
 
 Description

index 93a210e22592..2f2f1ef430d9 100644
@@ -11,7 +11,9 @@ V4L2_PIX_FMT_SRGGB16 ('RG16'), V4L2_PIX_FMT_SGRBG16 ('GR16'), V4L2_PIX_FMT_SGBRG
 ***************************************************************************************************************************
 
 
+====================
 16-bit Bayer formats
+====================
 
 
 Description

index 81e72f115994..02061c5a9778 100644
@@ -10,8 +10,9 @@ V4L2_PIX_FMT_SRGGB8 ('RGGB'), V4L2_PIX_FMT_SGRBG8 ('GRBG'), V4L2_PIX_FMT_SGBRG8
 ***************************************************************************************************************************
 
 
+===================
 8-bit Bayer formats
-
+===================
 
 Description
 ===========

index 1b0fdc160533..4194ebac2d6a 100644
@@ -452,16 +452,16 @@ Buffer Flags
 
 .. raw:: latex
 
-    \small
+    \footnotesize
 
-.. tabularcolumns:: |p{7.0cm}|p{2.1cm}|p{8.4cm}|
+.. tabularcolumns:: |p{6.5cm}|p{1.8cm}|p{9.0cm}|
 
 .. cssclass:: longtable
 
 .. flat-table::
     :header-rows:  0
     :stub-columns: 0
-    :widths:       3 1 4
+    :widths:       65 18 70
 
     * .. _`V4L2-BUF-FLAG-MAPPED`:
 

@@ -585,7 +585,7 @@ Buffer Flags
 
       - ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF``
       - 0x00000200
-      - Only valid if ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is
+      - Only valid if :c:type:`struct v4l2_requestbuffers` flag ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is
 	set. It is typically used with stateless decoders where multiple
 	output buffers each decode to a slice of the decoded frame.
 	Applications can set this flag when queueing the output buffer

index e1537ffc6eaa..360165c4d98f 100644
@@ -212,43 +212,57 @@ Stateless Codec Control ID
       - ``flags``
       - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
 
+.. raw:: latex
+
+    \normalsize
+
 .. _h264_pps_flags:
 
 ``Picture Parameter Set Flags``
 
-.. cssclass:: longtable
+.. raw:: latex
+
+    \begingroup
+    \scriptsize
+    \setlength{\tabcolsep}{2pt}
+
+.. tabularcolumns:: |p{9.8cm}|p{1.0cm}|p{6.5cm}|
 
 .. flat-table::
     :header-rows:  0
     :stub-columns: 0
-    :widths:       1 1 2
+    :widths:       10 1 4
 
     * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
-      - 0x00000001
+      - 0x0001
       -
     * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
-      - 0x00000002
+      - 0x0002
       -
     * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
-      - 0x00000004
+      - 0x0004
       -
     * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
-      - 0x00000008
+      - 0x0008
       -
     * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
-      - 0x00000010
+      - 0x0010
       -
     * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
-      - 0x00000020
+      - 0x0020
       -
     * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
-      - 0x00000040
+      - 0x0040
       -
     * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT``
-      - 0x00000080
-      - Indicates that ``V4L2_CID_STATELESS_H264_SCALING_MATRIX``
+      - 0x0080
+      - ``V4L2_CID_STATELESS_H264_SCALING_MATRIX``
         must be used for this picture.
 
+.. raw:: latex
+
+    \endgroup
+
 ``V4L2_CID_STATELESS_H264_SCALING_MATRIX (struct)``
     Specifies the scaling matrix (as extracted from the bitstream) for
     the associated H264 slice data. The bitstream parameters are

index 7d4d39201a3f..77744d6e5745 100644
@@ -48,6 +48,12 @@ relationship between the luma and chroma line padding and stride.
 
 All components are stored with the same number of bits per component.
 
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{5.2cm}|p{1.0cm}|p{1.5cm}|p{1.9cm}|p{1.2cm}|p{1.8cm}|p{2.7cm}|
+
 .. flat-table:: Overview of Semi-Planar YUV Formats
     :header-rows:  1
     :stub-columns: 0

@@ -146,12 +152,14 @@ All components are stored with the same number of bits per component.
       - Yes
       - Linear
 
-.. note::
+.. raw:: latex
 
-   .. [1] Order of chroma samples in the second plane
-   .. [2] Indicates if planes have to be contiguous in memory or can be
-      disjoint
-   .. [3] Macroblock size in pixels
+    \normalsize
+
+.. [1] Order of chroma samples in the second plane
+.. [2] Indicates if planes have to be contiguous in memory or can be
+       disjoint
+.. [3] Macroblock size in pixels
 
 
 **Color Sample Location:**

@@ -481,6 +489,12 @@ relationship between the luma and chroma line padding and stride.
 
 All components are stored with the same number of bits per component.
 
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{5.0cm}|p{1.1cm}|p{1.5cm}|p{2.2cm}|p{1.2cm}|p{3.7cm}|
+
 .. flat-table:: Overview of Fully Planar YUV Formats
     :header-rows:  1
     :stub-columns: 0

@@ -565,11 +579,13 @@ All components are stored with the same number of bits per component.
       - Y, Cr, Cb
       - No
 
-.. note::
+.. raw:: latex
 
-   .. [4] Order of luma and chroma planes
-   .. [5] Indicates if planes have to be contiguous in memory or can be
-      disjoint
+    \normalsize
+
+.. [4] Order of luma and chroma planes
+.. [5] Indicates if planes have to be contiguous in memory or can be
+       disjoint
 
 
 **Color Sample Location:**

index c7309a2fcbce..d5e014ce19b5 100644
@@ -35,7 +35,7 @@ device information, applications call the ioctl with a pointer to a
 struct :c:type:`cec_caps`. The driver fills the structure and
 returns the information to the application. The ioctl never fails.
 
-.. tabularcolumns:: |p{1.2cm}|p{2.5cm}|p{13.8cm}|
+.. tabularcolumns:: |p{1.2cm}|p{2.5cm}|p{13.6cm}|
 
 .. c:type:: cec_caps
 

@@ -63,7 +63,7 @@ returns the information to the application. The ioctl never fails.
       - CEC Framework API version, formatted with the ``KERNEL_VERSION()``
 	macro.
 
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.4cm}|
 
 .. _cec-capabilities:
 

index 13116b0b5c17..0e19855730e1 100644
@@ -39,7 +39,7 @@ provide a pointer to a cec_connector_info struct which will be populated
 by the kernel with the info provided by the adapter's driver. This ioctl
 is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
 
-.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
+.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.2cm}|
 
 .. c:type:: cec_connector_info
 

@@ -59,7 +59,7 @@ is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
     * - }
       -
 
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.4cm}|
 
 .. _connector-type:
 

@@ -82,7 +82,7 @@ is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
         Information about the connector can be found in
 	:ref:`cec-drm-connector-info`.
 
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.4cm}|
 
 .. c:type:: cec_drm_connector_info
 

index c760c07b6b3f..f3293a589dd6 100644
@@ -67,7 +67,7 @@ logical address types are already defined will return with error ``EBUSY``.
 
 .. c:type:: cec_log_addrs
 
-.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}|
+.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{8.0cm}|
 
 .. cssclass:: longtable
 

@@ -150,7 +150,7 @@ logical address types are already defined will return with error ``EBUSY``.
         give the CEC framework more information about the device type, even
         though the framework won't use it directly in the CEC message.
 
-.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.5cm}|
 
 .. _cec-log-addrs-flags:
 

@@ -186,7 +186,7 @@ logical address types are already defined will return with error ``EBUSY``.
 
 	All other messages are ignored.
 
-.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.5cm}|
 
 .. _cec-versions:
 

@@ -211,7 +211,7 @@ logical address types are already defined will return with error ``EBUSY``.
       - 6
       - CEC version according to the HDMI 2.0 standard.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _cec-prim-dev-types:
 

@@ -256,7 +256,7 @@ logical address types are already defined will return with error ``EBUSY``.
       - 7
       - Use for a video processor device.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _cec-log-addr-types:
 

@@ -304,7 +304,7 @@ logical address types are already defined will return with error ``EBUSY``.
 	Control).
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _cec-all-dev-types-flags:
 

index 736fda5ad73d..71d6a9e81f75 100644
@@ -44,7 +44,7 @@ two :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` events with
 the same state). In that case the intermediate state changes were lost but
 it is guaranteed that the state did change in between the two events.
 
-.. tabularcolumns:: |p{1.2cm}|p{2.9cm}|p{13.4cm}|
+.. tabularcolumns:: |p{1.2cm}|p{2.9cm}|p{13.2cm}|
 
 .. c:type:: cec_event_state_change
 

@@ -74,7 +74,7 @@ it is guaranteed that the state did change in between the two events.
 
 .. c:type:: cec_event_lost_msgs
 
-.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.5cm}|
+.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.3cm}|
 
 .. flat-table:: struct cec_event_lost_msgs
     :header-rows:  0

@@ -93,7 +93,7 @@ it is guaranteed that the state did change in between the two events.
 	replied to within a second according to the CEC specification,
 	this is more than enough.
 
-.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
+.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.2cm}|
 
 .. c:type:: cec_event
 

@@ -128,7 +128,7 @@ it is guaranteed that the state did change in between the two events.
     * - }
       -
 
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
 
 .. _cec-events:
 

@@ -201,7 +201,7 @@ it is guaranteed that the state did change in between the two events.
 	if the 5V is high, then an initial event will be generated for that
 	filehandle.
 
-.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
+.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.7cm}|
 
 .. _cec-event-flags:
 

index 663bdef8d6da..5fe105a13a6e 100644
@@ -72,7 +72,7 @@ always call :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`.
 
 Available initiator modes are:
 
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
 
 .. _cec-mode-initiator_e:
 

@@ -106,7 +106,7 @@ Available initiator modes are:
 
 Available follower modes are:
 
-.. tabularcolumns:: |p{6.6cm}|p{0.9cm}|p{10.0cm}|
+.. tabularcolumns:: |p{6.6cm}|p{0.9cm}|p{9.8cm}|
 
 .. _cec-mode-follower_e:
 

index b2fc051e99f4..bd7f7e7235cb 100644
@@ -84,7 +84,7 @@ physical address, but the cable is still connected and CEC still works.
 In order to detect/wake up the device it is allowed to send poll and 'Image/Text
 View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
 
-.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{13.0cm}|
+.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{12.8cm}|
 
 .. c:type:: cec_msg
 

@@ -196,7 +196,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
 	supports this, otherwise it is always 0. This counter is only
 	valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set.
 
-.. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.3cm}|
+.. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.1cm}|
 
 .. _cec-msg-flags:
 

@@ -229,7 +229,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
 	capability. If that is not set, then the ``EPERM`` error code is
 	returned.
 
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
 
 .. _cec-tx-status:
 

@@ -298,7 +298,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - The transmit timed out. This should not normally happen and this
 	indicates a driver problem.
 
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
 
 .. _cec-rx-status:
 

index e8499d482700..e8986254897f 100644
@@ -11,7 +11,7 @@ fe_type_t type, defined as:
 
 .. c:type:: fe_type
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. flat-table:: Frontend types
     :header-rows:  1

index 0c4c5d2cfcb2..d56ee6669ab9 100644
@@ -39,7 +39,7 @@ ioctl never fails.
 
 .. c:type:: media_device_info
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct media_device_info
     :header-rows:  0

index 92dd8ecd538c..73bda02498af 100644
@@ -50,7 +50,7 @@ id's until they get an error.
 
 .. c:type:: media_entity_desc
 
-.. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{11.2cm}|
+.. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{10.6cm}|
 
 .. flat-table:: struct media_entity_desc
     :header-rows:  0

index 3bc98a6a2ec5..381804a91c99 100644
@@ -54,7 +54,7 @@ returned during the enumeration process.
 
 .. c:type:: media_links_enum
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct media_links_enum
     :header-rows:  0

@@ -82,7 +82,7 @@ returned during the enumeration process.
 
 .. c:type:: media_pad_desc
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct media_pad_desc
     :header-rows:  0

@@ -109,7 +109,7 @@ returned during the enumeration process.
 
 .. c:type:: media_link_desc
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct media_link_desc
     :header-rows:  0

index 8f8b3b586edd..77ea5c5e9d7f 100644
@@ -46,7 +46,7 @@ other values untouched.
 If the ``topology_version`` remains the same, the ioctl should fill the
 desired arrays with the media graph elements.
 
-.. tabularcolumns:: |p{1.6cm}|p{3.4cm}|p{12.5cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.4cm}|p{12.3cm}|
 
 .. c:type:: media_v2_topology
 

@@ -119,7 +119,7 @@ desired arrays with the media graph elements.
 	  converted to a 64-bits integer. It can be zero. if zero, the ioctl
 	  won't store the links. It will just update ``num_links``
 
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
 
 .. c:type:: media_v2_entity
 

@@ -156,7 +156,7 @@ desired arrays with the media graph elements.
        -  Reserved for future extensions. Drivers and applications must set
 	  this array to zero.
 
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
 
 .. c:type:: media_v2_interface
 

@@ -189,7 +189,7 @@ desired arrays with the media graph elements.
        -  Used only for device node interfaces. See
 	  :c:type:`media_v2_intf_devnode` for details.
 
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
 
 .. c:type:: media_v2_intf_devnode
 

@@ -206,7 +206,7 @@ desired arrays with the media graph elements.
        -  ``minor``
        -  Device node minor number.
 
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
 
 .. c:type:: media_v2_pad
 

@@ -241,7 +241,7 @@ desired arrays with the media graph elements.
        -  Reserved for future extensions. Drivers and applications must set
 	  this array to zero.
 
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
 
 .. c:type:: media_v2_link
 

index 7b24a213cae7..f853f2b92040 100644
@@ -5,7 +5,7 @@
 Types and flags used to represent the media graph elements
 ==========================================================
 
-..  tabularcolumns:: |p{8.2cm}|p{10.3cm}|
+..  tabularcolumns:: |p{8.2cm}|p{9.3cm}|
 
 .. _media-entity-functions:
 .. _MEDIA-ENT-F-UNKNOWN:

@@ -244,7 +244,7 @@ Types and flags used to represent the media graph elements
        -  The entity represents a connector.
 
 
-..  tabularcolumns:: |p{6.5cm}|p{6.0cm}|p{5.0cm}|
+..  tabularcolumns:: |p{6.5cm}|p{6.0cm}|p{4.8cm}|
 
 .. _media-intf-type:
 .. _MEDIA-INTF-T-DVB-FE:

index aafbfda1f401..28ed94088015 100644
@@ -25,7 +25,7 @@ the remote via /dev/input/event devices.
 
 .. _rc_standard_keymap:
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: IR default keymapping
     :header-rows:  0

index 4194ebac2d6a..4b2696a392df 100644
@@ -157,7 +157,7 @@ of appropriately sized buffers for each use case).
 struct v4l2_buffer
 ==================
 
-.. tabularcolumns:: |p{2.8cm}|p{2.5cm}|p{1.6cm}|p{10.2cm}|
+.. tabularcolumns:: |p{2.9cm}|p{2.4cm}|p{12.0cm}|
 
 .. cssclass:: longtable
 

@@ -314,7 +314,7 @@ struct v4l2_buffer
 struct v4l2_plane
 =================
 
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{10.3cm}|
 
 .. cssclass:: longtable
 

@@ -389,7 +389,7 @@ enum v4l2_buf_type
 
 .. cssclass:: longtable
 
-.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{9.1cm}|
+.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{8.9cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -681,7 +681,7 @@ Buffer Flags
 enum v4l2_memory
 ================
 
-.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.7cm}|
+.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.5cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -715,7 +715,7 @@ The :c:type:`v4l2_buffer_timecode` structure is designed to hold a
 struct v4l2_timecode
 --------------------
 
-.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{12.3cm}|
+.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{13.1cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -751,8 +751,6 @@ struct v4l2_timecode
 Timecode Types
 --------------
 
-.. tabularcolumns:: |p{5.6cm}|p{0.8cm}|p{11.1cm}|
-
 .. flat-table::
     :header-rows:  0
     :stub-columns: 0

@@ -780,7 +778,7 @@ Timecode Types
 Timecode Flags
 --------------
 
-.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.5cm}|
+.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.3cm}|
 
 .. flat-table::
     :header-rows:  0

index ed5154700308..2da1370f4664 100644
@@ -200,7 +200,7 @@ Control IDs
 
 
 
-.. tabularcolumns:: |p{5.5cm}|p{12cm}|
+.. tabularcolumns:: |p{5.7cm}|p{11.8cm}|
 
 .. flat-table::
     :header-rows:  0

index 8ec3a73dcae4..0e7e1ee1471a 100644
@@ -49,7 +49,7 @@ to 0.
 
 .. c:type:: v4l2_meta_format
 
-.. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|
+.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}|
 
 .. flat-table:: struct v4l2_meta_format
     :header-rows:  0

index 3f43a01ba938..58f97c3a7792 100644
@@ -97,7 +97,7 @@ VBI devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
 and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
 :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
 
-.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.5cm}|
 
 .. c:type:: v4l2_vbi_format
 

@@ -180,7 +180,7 @@ and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does
       - This array is reserved for future extensions. Drivers and
 	applications must set it to zero.
 
-.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.4cm}|
 
 .. _vbifmt-flags:
 

index 207216d5e6a5..b1dadc24561f 100644
@@ -91,8 +91,6 @@ RDS datastructures
 
 .. c:type:: v4l2_rds_data
 
-.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{12.5cm}|
-
 .. flat-table:: struct v4l2_rds_data
     :header-rows:  0
     :stub-columns: 0

@@ -133,7 +131,7 @@ RDS datastructures
 
 .. _v4l2-rds-block-codes:
 
-.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.9cm}|
+.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.0cm}|
 
 .. flat-table:: Block defines
     :header-rows:  0

index 80b25a7e8017..928884dfe09d 100644
@@ -80,7 +80,7 @@ data transfer, set by the driver in order to inform application.
 
 .. c:type:: v4l2_sdr_format
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_sdr_format
     :header-rows:  0

index 213b736c9b67..97ec2b115c71 100644
@@ -108,7 +108,7 @@ struct v4l2_sliced_vbi_format
     \scriptsize
     \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.4cm}|p{4.4cm}|p{4.4cm}|
+.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.45cm}|p{4.45cm}|p{4.45cm}|
 
 .. cssclass:: longtable
 

@@ -213,9 +213,9 @@ Sliced VBI services
 
 .. raw:: latex
 
-    \scriptsize
+    \footnotesize
 
-.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{2.4cm}|p{2.0cm}|p{7.3cm}|
+.. tabularcolumns:: |p{4.2cm}|p{1.1cm}|p{2.1cm}|p{2.0cm}|p{6.5cm}|
 
 .. flat-table::
     :header-rows:  1

@@ -307,7 +307,7 @@ struct :c:type:`v4l2_sliced_vbi_data` elements must be zero.
 struct v4l2_sliced_vbi_data
 ---------------------------
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{1.2cm}|p{2.2cm}|p{13.9cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -464,7 +464,7 @@ number).
 struct v4l2_mpeg_vbi_fmt_ivtv
 -----------------------------
 
-.. tabularcolumns:: |p{1.0cm}|p{3.8cm}|p{1.0cm}|p{11.2cm}|
+.. tabularcolumns:: |p{4.2cm}|p{2.0cm}|p{11.1cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -499,7 +499,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv
 Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field
 -------------------------------------------------------------
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. flat-table::
     :header-rows:  1

@@ -528,7 +528,11 @@ Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field
 structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0
 -------------------------------------------------
 
-.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
+.. raw:: latex
+
+   \footnotesize
+
+.. tabularcolumns:: |p{4.6cm}|p{2.0cm}|p{10.7cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -569,13 +573,16 @@ structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0
 	one line of unspecified data that should be ignored by
 	applications.
 
+.. raw:: latex
+
+   \normalsize
 
 .. _v4l2-mpeg-vbi-itv0-1:
 
 struct v4l2_mpeg_vbi_ITV0
 -------------------------
 
-.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
+.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.7cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -596,7 +603,7 @@ struct v4l2_mpeg_vbi_ITV0
 struct v4l2_mpeg_vbi_itv0_line
 ------------------------------
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -618,7 +625,7 @@ struct v4l2_mpeg_vbi_itv0_line
 Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field
 ------------------------------------------------------------
 
-.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.5cm}|
 
 .. flat-table::
     :header-rows:  1

index 2aa8157efae1..fd1de0a73a9f 100644
@@ -209,9 +209,11 @@ list entity names and pad numbers).
 
 .. raw:: latex
 
+    \begingroup
     \scriptsize
+    \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{2.0cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|
+.. tabularcolumns:: |p{2.0cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|
 
 .. _sample-pipeline-config:
 

@@ -298,7 +300,7 @@ list entity names and pad numbers).
 
 .. raw:: latex
 
-    \normalsize
+    \endgroup
 
 1. Initial state. The sensor source pad format is set to its native 3MP
    size and V4L2_MBUS_FMT_SGRBG8_1X8 media bus code. Formats on the

index caa05fbbd396..33243ecb5033 100644
@@ -72,7 +72,11 @@ and radio devices supporting a set of related functions like video
 capturing, video overlay and VBI capturing. See :ref:`open` for an
 introduction.
 
-.. tabularcolumns:: |p{5.5cm}|p{6.5cm}|p{5.5cm}
+.. raw:: latex
+
+   \small
+
+.. tabularcolumns:: |p{5.3cm}|p{6.7cm}|p{5.3cm}|
 
 .. cssclass:: longtable
 

@@ -148,6 +152,10 @@ introduction.
       - ``-``
       - See above.
 
+.. raw:: latex
+
+   \normalsize
+
 The ``audios`` field was replaced by ``capabilities`` flag
 ``V4L2_CAP_AUDIO``, indicating *if* the device has any audio inputs or
 outputs. To determine their number applications can enumerate audio

index c05a2d2c675d..4c5061aa9cd4 100644
@@ -32,6 +32,7 @@ enum v4l2_exposure_auto_type -
     should ignore such requests. Possible values are:
 
 
+.. tabularcolumns:: |p{7.1cm}|p{10.4cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -81,7 +82,7 @@ enum v4l2_exposure_metering -
     Determines how the camera measures the amount of light available for
     the frame exposure. Possible values are:
 
-.. tabularcolumns:: |p{8.7cm}|p{8.8cm}|
+.. tabularcolumns:: |p{8.7cm}|p{8.7cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -173,7 +174,7 @@ enum v4l2_exposure_metering -
     control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS``
     control value.
 
-.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
+.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -199,7 +200,7 @@ enum v4l2_exposure_metering -
 enum v4l2_auto_focus_range -
     Determines auto focus distance range for which lens may be adjusted.
 
-.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
+.. tabularcolumns:: |p{6.9cm}|p{10.6cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -274,7 +275,7 @@ enum v4l2_auto_n_preset_white_balance -
     representation. The following white balance presets are listed in
     order of increasing color temperature.
 
-.. tabularcolumns:: |p{7.2 cm}|p{10.3cm}|
+.. tabularcolumns:: |p{7.4cm}|p{10.1cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -384,7 +385,9 @@ enum v4l2_scene_mode -
 
     \small
 
-.. tabularcolumns:: |p{5.9cm}|p{11.5cm}|
+.. tabularcolumns:: |p{5.9cm}|p{11.6cm}|
+
+.. cssclass:: longtable
 
 .. flat-table::
     :header-rows:  0

@@ -519,6 +522,7 @@ enum v4l2_scene_mode -
     have the ``V4L2_CAMERA_ORIENTATION_EXTERNAL`` orientation.
 
 
+.. tabularcolumns:: |p{7.7cm}|p{9.8cm}|
 
 .. flat-table::
     :header-rows:  0

312 lines not on this page · raw message

583 lines not on this page · raw message

index a6f696bf89dd..d2794e03ac6d 100644
@@ -99,7 +99,7 @@ enum v4l2_dv_it_content_type -
     or an analog source. The enum v4l2_dv_it_content_type defines
     the possible content types:
 
-.. tabularcolumns:: |p{7.3cm}|p{10.4cm}|
+.. tabularcolumns:: |p{7.3cm}|p{10.2cm}|
 
 .. flat-table::
     :header-rows:  0

index ad4b878cd034..d22c5efb806a 100644
@@ -63,6 +63,7 @@ Flash Control IDs
     presence of some faults. See V4L2_CID_FLASH_FAULT.
 
 
+.. tabularcolumns:: |p{5.7cm}|p{11.8cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -73,14 +74,16 @@ Flash Control IDs
     * - ``V4L2_FLASH_LED_MODE_FLASH``
       - Flash mode.
     * - ``V4L2_FLASH_LED_MODE_TORCH``
-      - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.
+      - Torch mode.
+
+        See V4L2_CID_FLASH_TORCH_INTENSITY.
 
 
 
 ``V4L2_CID_FLASH_STROBE_SOURCE (menu)``
     Defines the source of the flash LED strobe.
 
-.. tabularcolumns:: |p{7.5cm}|p{10.0cm}|
+.. tabularcolumns:: |p{7.5cm}|p{7.5cm}|
 
 .. flat-table::
     :header-rows:  0

index 54548ea4308c..9a0ed8fc550f 100644
@@ -62,7 +62,7 @@ enum v4l2_field
 
 .. c:type:: v4l2_field
 
-.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{11.1cm}|
+.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{10.9cm}|
 
 .. cssclass:: longtable
 

index acad5f3ca0c1..ba6c0c961204 100644
@@ -7,7 +7,13 @@ Compressed Formats
 
 .. _compressed-formats:
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{5.8cm}|p{1.2cm}|p{10.3cm}|
+
+.. cssclass:: longtable
 
 .. flat-table:: Compressed Image Formats
     :header-rows:  1

@@ -220,3 +226,7 @@ Compressed Formats
         Metadata associated with the frame to decode is required to be passed
         through the ``V4L2_CID_STATELESS_FWHT_PARAMS`` control.
 	See the :ref:`associated Codec Control ID <codec-stateless-fwht>`.
+
+.. raw:: latex
+
+    \normalsize

index eb551b57557e..560fd2ead8ca 100644
@@ -36,10 +36,10 @@ Cb\ :sub:`5-0` Cr\ :sub:`4-0`], and stored in memory in two bytes,
 .. raw:: latex
 
     \begingroup
-    \tiny
+    \scriptsize
     \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{2.5cm}|p{0.69cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|
+.. tabularcolumns:: |p{3.5cm}|p{0.96cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|
 
 .. flat-table:: Packed YUV 4:4:4 Image Formats (less than 8bpc)
     :header-rows:  2

@@ -234,6 +234,12 @@ the second byte and Y'\ :sub:`7-0` in the third byte.
 These formats, commonly referred to as YUYV or YUY2, subsample the chroma
 components horizontally by 2, storing 2 pixels in 4 bytes.
 
+.. raw:: latex
+
+    \footnotesize
+
+.. tabularcolumns:: |p{3.4cm}|p{1.2cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|
+
 .. flat-table:: Packed YUV 4:2:2 Formats
     :header-rows: 1
     :stub-columns: 0

@@ -301,6 +307,10 @@ components horizontally by 2, storing 2 pixels in 4 bytes.
       - Y'\ :sub:`3`
       - Cb\ :sub:`2`
 
+.. raw:: latex
+
+    \normalsize
+
 **Color Sample Location:**
 Chroma samples are :ref:`interstitially sited<yuv-chroma-centered>`
 horizontally.

@@ -312,6 +322,12 @@ horizontally.
 This format subsamples the chroma components horizontally by 4, storing 8
 pixels in 12 bytes.
 
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{2.9cm}|p{0.8cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|
+
 .. flat-table:: Packed YUV 4:1:1 Formats
     :header-rows: 1
     :stub-columns: 0

@@ -348,11 +364,15 @@ pixels in 12 bytes.
       - Y'\ :sub:`6`
       - Y'\ :sub:`7`
 
+.. raw:: latex
+
+    \normalsize
+
 .. note::
 
     Do not confuse ``V4L2_PIX_FMT_Y41P`` with
     :ref:`V4L2_PIX_FMT_YUV411P <V4L2-PIX-FMT-YUV411P>`. Y41P is derived from
-    "YUV 4:1:1 *packed*", while YUV411P stands for "YUV 4:1:1 *planar*".
+    "YUV 4:1:1 **packed**", while YUV411P stands for "YUV 4:1:1 **planar**".
 
 **Color Sample Location:**
 Chroma samples are :ref:`interstitially sited<yuv-chroma-centered>`

index c9231e18859b..253e4bcc949d 100644
@@ -17,10 +17,14 @@ you think your format should be listed in a standard format section
 please make a proposal on the linux-media mailing list.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _reserved-formats:
 
+.. raw:: latex
+
+    \small
+
 .. flat-table:: Reserved Image Formats
     :header-rows:  1
     :stub-columns: 0

@@ -256,3 +260,7 @@ please make a proposal on the linux-media mailing list.
 	of tiles, resulting in 32-aligned resolutions for the luminance plane
 	and 16-aligned resolutions for the chrominance plane (with 2x2
 	subsampling).
+
+.. raw:: latex
+
+    \normalsize

index 897676ee2c9d..48b0f787274c 100644
@@ -655,12 +655,7 @@ nomenclature that instead use the order of components as seen in a 24- or
 
 .. raw:: latex
 
-    \begingroup
-    \tiny
-    \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|
-
+    \small
 
 .. flat-table:: RGB Formats With 8 Bits Per Component
     :header-rows:  1

@@ -765,7 +760,7 @@ nomenclature that instead use the order of components as seen in a 24- or
 
 .. raw:: latex
 
-    \endgroup
+    \normalsize
 
 
 Deprecated RGB Formats

index 5d4d260db7b5..3322b0600f1d 100644
@@ -27,7 +27,11 @@ Below is an example of a small image in V4L2_PIX_FMT_IPU3_SBGGR10 format.
 **Byte Order.**
 Each cell is one byte.
 
-.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|
+.. raw:: latex
+
+    \small
+
+.. tabularcolumns:: |p{0.8cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|
 
 .. flat-table::
 

@@ -335,3 +339,7 @@ Each cell is one byte.
       - R\ :sub:`0323high`
       - G\ :sub:`0324low`
       - G\ :sub:`0324high`\ (bits 1--0)
+
+.. raw:: latex
+
+    \normalsize

index dc52e827b5d3..fd5feb415531 100644
@@ -33,7 +33,7 @@ of a small V4L2_PIX_FMT_SBGGR10P image:
 **Byte Order.**
 Each cell is one byte.
 
-.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}|
+.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{9.3cm}|
 
 .. flat-table::
     :header-rows:  0

index a2f8ebfceb84..b6e79e2f8ce4 100644
@@ -31,7 +31,7 @@ Below is an example of a small V4L2_PIX_FMT_SBGGR12P image:
 **Byte Order.**
 Each cell is one byte.
 
-.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|
+.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}|
 
 
 .. flat-table::

index e25baedfca77..3572e42adb22 100644
@@ -36,9 +36,11 @@ Each cell is one byte.
 
 .. raw:: latex
 
+    \begingroup
     \footnotesize
+    \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{1.8cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.1cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|
+.. tabularcolumns:: |p{1.6cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{3.5cm}|p{3.5cm}|p{3.5cm}|
 
 .. flat-table::
     :header-rows:  0

@@ -141,5 +143,5 @@ Each cell is one byte.
 
 .. raw:: latex
 
-    \normalsize
+    \endgroup
 

index 977facc3a1f4..ad4da988c3a3 100644
@@ -13,7 +13,7 @@ describing all planes of that format.
 
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{1.4cm}|p{4.0cm}|p{11.9cm}|
 
 .. c:type:: v4l2_plane_pix_format
 

@@ -52,7 +52,7 @@ describing all planes of that format.
 
     \small
 
-.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.5cm}|
+.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.3cm}|
 
 .. c:type:: v4l2_pix_format_mplane
 

index 71e828093310..9c423ffe02f9 100644
@@ -4,7 +4,7 @@
 Single-planar format structure
 ******************************
 
-.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{11.0cm}|
+.. tabularcolumns:: |p{4.0cm}|p{2.6cm}|p{10.7cm}|
 
 .. c:type:: v4l2_pix_format
 

@@ -205,7 +205,7 @@ Single-planar format structure
 	the flag V4L2_FMT_FLAG_CSC_XFER_FUNC in the corresponding struct
 	:c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.8cm}|p{2.3cm}|p{8.2cm}|
 
 .. _format-flags:
 

index 0c8c5e0a380e..91942c4f0967 100644
@@ -19,6 +19,12 @@ are often referred to as greyscale formats.
    - `0` denotes padding bits set to 0.
 
 
+.. raw:: latex
+
+    \scriptsize
+
+.. tabularcolumns:: |p{3.6cm}|p{3.0cm}|p{1.3cm}|p{2.6cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|
+
 .. flat-table:: Luma-Only Image Formats
     :header-rows: 1
     :stub-columns: 0

@@ -119,6 +125,10 @@ are often referred to as greyscale formats.
       - ...
       - ...
 
+.. raw:: latex
+
+    \normalsize
+
 .. note::
 
     For the Y16 and Y16_BE formats, the actual sampling precision may be lower

index 7f16cbe46e5c..cda3cd8e8855 100644
@@ -5,10 +5,12 @@
 Media Bus Formats
 =================
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. c:type:: v4l2_mbus_framefmt
 
+.. tabularcolumns:: |p{2.0cm}|p{4.0cm}|p{11.3cm}|
+
+.. cssclass:: longtable
+
 .. flat-table:: struct v4l2_mbus_framefmt
     :header-rows:  0
     :stub-columns: 0

@@ -113,6 +115,8 @@ Media Bus Formats
 
 .. _v4l2-mbus-framefmt-flags:
 
+.. tabularcolumns:: |p{6.5cm}|p{1.6cm}|p{9.2cm}|
+
 .. flat-table:: v4l2_mbus_framefmt Flags
     :header-rows:  0
     :stub-columns: 0

@@ -204,7 +208,7 @@ The following tables list existing packed RGB formats.
 .. it switches to long table, and there's no way to override it.
 
 
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{5.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
 
 .. _v4l2-mbus-pixelcode-rgb:
 

@@ -1890,7 +1894,7 @@ JEIDA defined bit mapping will be named
 
 .. raw:: latex
 
-    \tiny
+    \small
 
 .. _v4l2-mbus-pixelcode-rgb-lvds:
 

@@ -2152,7 +2156,7 @@ organization is given as an example for the first pixel only.
     \tiny
     \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{6.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
 
 .. _v4l2-mbus-pixelcode-bayer:
 

@@ -3005,7 +3009,7 @@ the following codes.
     \tiny
     \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{5.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
 
 .. _v4l2-mbus-pixelcode-yuv8:
 

@@ -7210,7 +7214,7 @@ The following table list existing packed 36bit wide YUV formats.
     \tiny
     \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{4.1cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
 
 .. _v4l2-mbus-pixelcode-yuv8-36bit:
 

@@ -7398,7 +7402,7 @@ The following table list existing packed 48bit wide YUV formats.
     \tiny
     \setlength{\tabcolsep}{2pt}
 
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
 
 .. _v4l2-mbus-pixelcode-yuv8-48bit:
 

@@ -7851,7 +7855,7 @@ The following table lists existing JPEG compressed formats.
 
 .. _v4l2-mbus-pixelcode-jpeg:
 
-.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{10.1cm}|
+.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{9.9cm}|
 
 .. flat-table:: JPEG Formats
     :header-rows:  1

@@ -7884,7 +7888,7 @@ formats.
 
 .. _v4l2-mbus-pixelcode-vendor-specific:
 
-.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
+.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.9cm}|
 
 .. flat-table:: Vendor and device specific formats
     :header-rows:  1

@@ -7909,7 +7913,7 @@ This section lists all metadata formats.
 
 The following table lists the existing metadata formats.
 
-.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
+.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.9cm}|
 
 .. flat-table:: Metadata formats
     :header-rows:  1

index 3a834d050110..1cb1531c1e52 100644
@@ -6,10 +6,16 @@
 Selection flags
 ***************
 
-.. tabularcolumns:: |p{5.2cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.6cm}|
-
 .. _v4l2-selection-flags-table:
 
+.. raw:: latex
+
+   \small
+
+.. tabularcolumns:: |p{5.6cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.2cm}|
+
+.. cssclass:: longtable
+
 .. flat-table:: Selection flag definitions
     :header-rows:  1
     :stub-columns: 0

@@ -42,3 +48,7 @@ Selection flags
 	inside the subdevice to all further processing steps.
       - No
       - Yes
+
+.. raw:: latex
+
+   \normalsize

index e877ebbdb32e..b46bae984f35 100644
@@ -12,7 +12,13 @@ of the two interfaces they are used.
 
 .. _v4l2-selection-targets-table:
 
-.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{7.4cm}|p{1.2cm}|p{1.4cm}|
+.. raw:: latex
+
+   \small
+
+.. tabularcolumns:: |p{6.2cm}|p{1.4cm}|p{7.3cm}|p{1.2cm}|p{0.8cm}|
+
+.. cssclass:: longtable
 
 .. flat-table:: Selection target definitions
     :header-rows:  1

@@ -69,3 +75,7 @@ of the two interfaces they are used.
 	modified by hardware.
       - Yes
       - No
+
+.. raw:: latex
+
+   \normalsize

index b06e5b528e11..f98f18c9e91c 100644
@@ -72,7 +72,7 @@ than the number requested.
 
 .. c:type:: v4l2_create_buffers
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_create_buffers
     :header-rows:  0

index 00c31410d4e4..551ac9d3c6ef 100644
@@ -45,7 +45,7 @@ overlay devices.
 
 .. c:type:: v4l2_cropcap
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_cropcap
     :header-rows:  0

@@ -96,7 +96,7 @@ overlay devices.
 
 .. _v4l2-rect-crop:
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_rect
     :header-rows:  0

index bde6e952b267..1a1e093936f1 100644
@@ -75,7 +75,7 @@ is available from the LinuxTV v4l-dvb repository; see
 `https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
 instructions.
 
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}|
 
 .. _name-v4l2-dbg-match:
 

@@ -101,7 +101,7 @@ instructions.
       -
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_dbg_chip_info
 

@@ -127,7 +127,7 @@ instructions.
       - Reserved fields, both application and driver must set these to 0.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _name-chip-match-types:
 

index e1a6abe705bd..53f10c7319b2 100644
@@ -85,7 +85,7 @@ It is available from the LinuxTV v4l-dvb repository; see
 `https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
 instructions.
 
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}|
 
 .. c:type:: v4l2_dbg_match
 

@@ -131,7 +131,7 @@ instructions.
       - The value read from, or to be written into the register.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _chip-match-types:
 

index fd71ceece037..7a8f490131d8 100644
@@ -59,7 +59,7 @@ In principle, these ioctls are optional, not all drivers may support them. They
 introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decoders
 (as further documented in :ref:`decoder`).
 
-.. tabularcolumns:: |p{1.1cm}|p{2.4cm}|p{1.2cm}|p{1.6cm}|p{10.6cm}|
+.. tabularcolumns:: |p{2.0cm}|p{1.1cm}|p{2.2cm}|p{11.8cm}|
 
 .. c:type:: v4l2_decoder_cmd
 

@@ -129,10 +129,12 @@ introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decod
       -
 
 
-.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.3cm}|
-
 .. _decoder-cmds:
 
+.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.1cm}|
+
+.. cssclass:: longtable
+
 .. flat-table:: Decoder Commands
     :header-rows:  0
     :stub-columns: 0

index 634af717c8ba..6eb40073c906 100644
@@ -37,11 +37,10 @@ structure are filled by the driver. The file handle will also receive
 exceptions which the application may get by e.g. using the select system
 call.
 
-.. tabularcolumns:: |p{3.0cm}|p{4.4cm}|p{2.4cm}|p{7.7cm}|
-
 .. c:type:: v4l2_event
 
-.. cssclass: longtable
+.. tabularcolumns:: |p{3.0cm}|p{3.4cm}|p{10.9cm}|
+
 
 .. flat-table:: struct v4l2_event
     :header-rows:  0

@@ -98,7 +97,7 @@ call.
 	zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.2cm}|p{2.6cm}|p{8.5cm}|
 
 .. cssclass:: longtable
 

@@ -188,7 +187,7 @@ call.
       - Base event number for driver-private events.
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_event_vsync
 

@@ -202,7 +201,7 @@ call.
       - The upcoming field. See enum :c:type:`v4l2_field`.
 
 
-.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{1.8cm}|p{8.5cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{10.8cm}|
 
 .. c:type:: v4l2_event_ctrl
 

@@ -252,7 +251,7 @@ call.
 	:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_event_frame_sync
 

@@ -266,7 +265,7 @@ call.
       - The sequence number of the frame being received.
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_event_src_change
 

@@ -281,7 +280,7 @@ call.
 	:ref:`src-changes-flags`.
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_event_motion_det
 

@@ -310,7 +309,7 @@ call.
 	automatically assigned to the default region 0.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _ctrl-changes-flags:
 

@@ -335,7 +334,7 @@ call.
 	step or the default value of the control changed.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _src-changes-flags:
 

index 27bd6a83e42c..8ced100bb156 100644
@@ -55,7 +55,7 @@ the desired pad number in the struct
 zero the ``reserved`` array. Attempts to query capabilities on a pad
 that doesn't support them will return an ``EINVAL`` error code.
 
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.2cm}|p{12.9cm}|
 
 .. c:type:: v4l2_bt_timings_cap
 

@@ -96,7 +96,7 @@ that doesn't support them will return an ``EINVAL`` error code.
 	Drivers must set the array to zero.
 
 
-.. tabularcolumns:: |p{1.0cm}|p{4.0cm}|p{3.5cm}|p{9.2cm}|
+.. tabularcolumns:: |p{4.4cm}|p{3.6cm}|p{9.3cm}|
 
 .. c:type:: v4l2_dv_timings_cap
 

@@ -128,7 +128,7 @@ that doesn't support them will return an ``EINVAL`` error code.
     * - }
       -
 
-.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+.. tabularcolumns:: |p{7.2cm}|p{10.3cm}|
 
 .. _dv-bt-cap-capabilities:
 

index 5673606711b4..2b5867a68b31 100644
@@ -66,7 +66,7 @@ These ioctls are optional, not all drivers may support them. They were
 introduced in Linux 2.6.21. They are, however, mandatory for stateful mem2mem
 encoders (as further documented in :ref:`encoder`).
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_encoder_cmd
 

@@ -89,7 +89,7 @@ encoders (as further documented in :ref:`encoder`).
 	the array to zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _encoder-cmds:
 

@@ -133,7 +133,7 @@ encoders (as further documented in :ref:`encoder`).
 	the encoder is already running, this command does nothing. No
 	flags are defined for this command.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _encoder-flags:
 

index 20730cd4f6ef..a91c1a3f0e32 100644
@@ -67,7 +67,7 @@ return an ``EINVAL`` error code.
 
 .. c:type:: v4l2_enum_dv_timings
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_enum_dv_timings
     :header-rows:  0

index 2b3fa9c23146..000c154b0f98 100644
@@ -71,10 +71,12 @@ the ``mbus_code`` field is handled differently:
    formats shall not depend on the active configuration of the video device
    or device pipeline.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. c:type:: v4l2_fmtdesc
 
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
+
 .. flat-table:: struct v4l2_fmtdesc
     :header-rows:  0
     :stub-columns: 0

@@ -135,7 +137,9 @@ the ``mbus_code`` field is handled differently:
 	zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{8.4cm}|p{1.8cm}|p{7.1cm}|
+
+.. cssclass:: longtable
 
 .. _fmtdesc-flags:
 

index 1f0949726045..34cd39feaeaa 100644
@@ -99,8 +99,6 @@ application should zero out all members except for the *IN* fields.
 
 .. c:type:: v4l2_frmival_stepwise
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: struct v4l2_frmival_stepwise
     :header-rows:  0
     :stub-columns: 0

@@ -119,7 +117,7 @@ application should zero out all members except for the *IN* fields.
 
 .. c:type:: v4l2_frmivalenum
 
-.. tabularcolumns:: |p{1.8cm}|p{4.4cm}|p{2.4cm}|p{8.9cm}|
+.. tabularcolumns:: |p{4.9cm}|p{3.3cm}|p{9.1cm}|
 
 .. flat-table:: struct v4l2_frmivalenum
     :header-rows:  0

@@ -154,7 +152,6 @@ application should zero out all members except for the *IN* fields.
       -
     * - __u32
       - ``reserved[2]``
-      -
       - Reserved space for future use. Must be zeroed by drivers and
 	applications.
 

@@ -164,7 +161,7 @@ Enums
 
 .. c:type:: v4l2_frmivaltypes
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. flat-table:: enum v4l2_frmivaltypes
     :header-rows:  0

index c9a36bcf699f..7271fe37ce3f 100644
@@ -89,8 +89,6 @@ application should zero out all members except for the *IN* fields.
 
 .. c:type:: v4l2_frmsize_discrete
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: struct v4l2_frmsize_discrete
     :header-rows:  0
     :stub-columns: 0

@@ -106,8 +104,6 @@ application should zero out all members except for the *IN* fields.
 
 .. c:type:: v4l2_frmsize_stepwise
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. flat-table:: struct v4l2_frmsize_stepwise
     :header-rows:  0
     :stub-columns: 0

@@ -135,7 +131,7 @@ application should zero out all members except for the *IN* fields.
 
 .. c:type:: v4l2_frmsizeenum
 
-.. tabularcolumns:: |p{1.4cm}|p{5.9cm}|p{2.3cm}|p{8.0cm}|
+.. tabularcolumns:: |p{6.4cm}|p{2.8cm}|p{8.1cm}|
 
 .. flat-table:: struct v4l2_frmsizeenum
     :header-rows:  0

@@ -173,7 +169,7 @@ Enums
 
 .. c:type:: v4l2_frmsizetypes
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. flat-table:: enum v4l2_frmsizetypes
     :header-rows:  0

index a0764fca8d18..e385929bed62 100644
@@ -40,7 +40,7 @@ fields, and zero out the ``reserved`` array of a struct
 This ioctl is supported if the ``V4L2_TUNER_CAP_FREQ_BANDS`` capability
 of the corresponding tuner/modulator is set.
 
-.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
+.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{2.4cm}|
 
 .. c:type:: v4l2_frequency_band
 

@@ -108,7 +108,7 @@ of the corresponding tuner/modulator is set.
 	Applications and drivers must set the array to zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _band-modulation:
 

index 0f62e681a827..d5f0535bd866 100644
@@ -38,7 +38,7 @@ fill the rest of the structure or return an ``EINVAL`` error code when the
 index is out of bounds. To enumerate all inputs applications shall begin
 at index zero, incrementing by one until the driver returns ``EINVAL``.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{3.0cm}|p{3.5cm}|p{10.8cm}|
 
 .. c:type:: v4l2_input
 

@@ -101,7 +101,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
 	zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{1.0cm}|p{9.7cm}|
 
 .. _input-type:
 

@@ -123,7 +123,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
       - This input is a touch device for capturing raw touch data.
 
 
-.. tabularcolumns:: |p{4.8cm}|p{2.6cm}|p{10.1cm}|
+.. tabularcolumns:: |p{5.6cm}|p{2.6cm}|p{9.1cm}|
 
 .. _input-status:
 

@@ -194,7 +194,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
       - VTR time constant. [?]
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.4cm}|p{8.3cm}|
 
 .. _input-capabilities:
 

index 91fcf99094d2..06ee8386ae86 100644
@@ -39,7 +39,7 @@ when the index is out of bounds. To enumerate all outputs applications
 shall begin at index zero, incrementing by one until the driver returns
 ``EINVAL``.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_output
 

@@ -96,7 +96,7 @@ shall begin at index zero, incrementing by one until the driver returns
 	zero.
 
 
-.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.5cm}|p{0.6cm}|p{9.2cm}|
 
 .. _output-type:
 

@@ -118,7 +118,7 @@ shall begin at index zero, incrementing by one until the driver returns
       - The video output will be copied to a :ref:`video overlay <overlay>`.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.4cm}|p{2.4cm}|p{8.5cm}|
 
 .. _output-capabilities:
 

index b5704e8cf909..6af71b74d42e 100644
@@ -47,7 +47,7 @@ or output. [#f1]_
 
 .. c:type:: v4l2_standard
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_standard
     :header-rows:  0

@@ -86,7 +86,7 @@ or output. [#f1]_
 
 .. c:type:: v4l2_fract
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_fract
     :header-rows:  0

@@ -100,7 +100,7 @@ or output. [#f1]_
       - ``denominator``
       -
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. _v4l2-std-id:
 

index 212377c90442..982e8bcd9c47 100644
@@ -112,7 +112,7 @@ Examples
 
 .. c:type:: v4l2_exportbuffer
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_exportbuffer
     :header-rows:  0

index 4c93bd55bd97..bf61db04d12e 100644
@@ -49,7 +49,7 @@ ioctl. Drivers may switch to a different audio mode if the request
 cannot be satisfied. However, this is a write-only ioctl, it does not
 return the actual new audio mode.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_audio
 

@@ -79,7 +79,7 @@ return the actual new audio mode.
 	the array to zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _audio-capability:
 

@@ -99,7 +99,7 @@ return the actual new audio mode.
       - Automatic Volume Level mode is supported.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _audio-mode:
 

index 194f22493517..9ab15add2911 100644
@@ -58,7 +58,7 @@ as ``VIDIOC_G_AUDOUT`` does.
 
 .. c:type:: v4l2_audioout
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_audioout
     :header-rows:  0

index 0ac1509e41cc..570d98308dc4 100644
@@ -71,7 +71,7 @@ When cropping is not supported then no parameters are changed and
 
 .. c:type:: v4l2_crop
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_crop
     :header-rows:  0

index 4f1bed53fad5..80e8c63d530f 100644
@@ -57,7 +57,7 @@ These ioctls work only with user controls. For other control classes the
 
 .. c:type:: v4l2_control
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_control
     :header-rows:  0

index 760a33d43b7d..dfc45427ea23 100644
@@ -82,10 +82,12 @@ EBUSY
 EPERM
     ``VIDIOC_SUBDEV_S_DV_TIMINGS`` has been called on a read-only subdevice.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
 .. c:type:: v4l2_bt_timings
 
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
+
+.. cssclass:: longtable
+
 .. flat-table:: struct v4l2_bt_timings
     :header-rows:  0
     :stub-columns: 0

@@ -171,7 +173,7 @@ EPERM
       - Reserved for future extensions. Drivers and applications must set
 	the array to zero.
 
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.5cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.1cm}|
 
 .. c:type:: v4l2_dv_timings
 

@@ -194,7 +196,7 @@ EPERM
     * - }
       -
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. _dv-timing-types:
 

@@ -213,7 +215,9 @@ EPERM
       - 0
       - BT.656/1120 timings
 
-.. tabularcolumns:: |p{4.5cm}|p{12.8cm}|
+.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
+
+.. cssclass:: longtable
 
 .. _dv-bt-standards:
 

@@ -236,9 +240,11 @@ EPERM
 	There are no horizontal syncs/porches at all in this format.
 	Total blanking timings must be set in hsync or vsync fields only.
 
-.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+_dv-bt-flags:
 
-.. _dv-bt-flags:
+.. tabularcolumns:: |p{7.7cm}|p{9.8cm}|
+
+.. cssclass:: longtable
 
 .. flat-table:: DV BT Timing flags
     :header-rows:  0

index 39d523a449a7..fc5535c50d61 100644
@@ -100,7 +100,7 @@ EDID is no longer available.
 
 .. c:type:: v4l2_edid
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_edid
     :header-rows:  0

index 7698e65ccccf..c6792bbe3d04 100644
@@ -54,7 +54,7 @@ will be zero.
 Currently this ioctl is only defined for MPEG-2 program streams and
 video elementary streams.
 
-.. tabularcolumns:: |p{3.8cm}|p{5.6cm}|p{8.1cm}|
+.. tabularcolumns:: |p{4.2cm}|p{6.2cm}|p{6.9cm}|
 
 .. c:type:: v4l2_enc_idx
 

@@ -81,7 +81,7 @@ video elementary streams.
 	their ``offset``.
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_enc_idx_entry
 

@@ -113,7 +113,7 @@ video elementary streams.
       - Reserved for future extensions. Drivers must set the array to
 	zero.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _enc-idx-flags:
 

index b9c62affbb5a..a90c433e430c 100644
@@ -118,11 +118,15 @@ correct. This prevents the situation where only some of the controls
 were set/get. Only low-level errors (e. g. a failed i2c command) can
 still cause this situation.
 
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{1.5cm}|p{11.8cm}|
+.. tabularcolumns:: |p{6.8cm}|p{4.0cm}|p{6.5cm}|
 
 .. c:type:: v4l2_ext_control
 
-.. cssclass: longtable
+.. raw:: latex
+
+   \footnotesize
+
+.. cssclass:: longtable
 
 .. flat-table:: struct v4l2_ext_control
     :header-rows:  0

@@ -221,7 +225,11 @@ still cause this situation.
     * - }
       -
 
-.. tabularcolumns:: |p{4.0cm}|p{2.2cm}|p{2.1cm}|p{8.2cm}|
+.. raw:: latex
+
+   \normalsize
+
+.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{10.8cm}|
 
 .. c:type:: v4l2_ext_controls
 

@@ -334,10 +342,12 @@ still cause this situation.
 
 	Ignored if ``count`` equals zero.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
 .. _ctrl-class:
 
+.. tabularcolumns:: |p{7.3cm}|p{2.0cm}|p{8.0cm}|
+
+.. cssclass:: longtable
+
 .. flat-table:: Control classes
     :header-rows:  0
     :stub-columns: 0

index dc1f16343b22..b6cc1a823207 100644
@@ -75,7 +75,7 @@ jeopardize the system security, its stability or even damage the
 hardware, therefore only the superuser can set the parameters for a
 destructive video overlay.
 
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}|
 
 .. c:type:: v4l2_framebuffer
 

@@ -207,7 +207,7 @@ destructive video overlay.
       - ``priv``
       - Reserved. Drivers and applications must set this field to zero.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.4cm}|p{1.6cm}|p{8.3cm}|
 
 .. _framebuffer-cap:
 

@@ -255,7 +255,7 @@ destructive video overlay.
 	chroma-key colors are replaced by framebuffer pixels, which is
 	exactly opposite of ``V4L2_FBUF_CAP_CHROMAKEY``
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.4cm}|p{1.6cm}|p{8.3cm}|
 
 .. _framebuffer-flags:
 

index 7e9f8475ea63..675c385e5aca 100644
@@ -89,7 +89,7 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical
 
 .. c:type:: v4l2_format
 
-.. tabularcolumns::  |p{1.2cm}|p{4.6cm}|p{3.0cm}|p{8.6cm}|
+.. tabularcolumns::  |p{7.4cm}|p{4.4cm}|p{5.5cm}|
 
 .. flat-table:: struct v4l2_format
     :header-rows:  0

index 5445a4a442e4..0d037665a89e 100644
@@ -51,7 +51,7 @@ structure. When the requested frequency is not possible the driver
 assumes the closest possible value. However :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` is a
 write-only ioctl, it does not return the actual new frequency.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_frequency
 

index 93ed111dfcb9..d4565d2cc1f5 100644
@@ -54,7 +54,7 @@ stored in the JPEG-encoded fields. These define how the JPEG field is
 encoded. If you omit them, applications assume you've used standard
 encoding. You usually do want to add them.
 
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.1cm}|
 
 .. c:type:: v4l2_jpegcompression
 

@@ -91,7 +91,7 @@ encoding. You usually do want to add them.
 	control is exposed by a driver applications should use it instead
 	and ignore this field.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _jpeg-markers:
 

index 2ac2473e341b..e73d24f12054 100644
@@ -60,7 +60,7 @@ context.
 To change the radio frequency the
 :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
 
-.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
+.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{2.4cm}|
 
 .. c:type:: v4l2_modulator
 

@@ -119,11 +119,12 @@ To change the radio frequency the
 
 	Drivers and applications must set the array to zero.
 
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
 .. _modulator-txsubchans:
 
+.. tabularcolumns:: |p{6.0cm}|p{2.0cm}|p{9.3cm}|
+
+.. cssclass:: longtable
+
 .. flat-table:: Modulator Audio Transmission Flags
     :header-rows:  0
     :stub-columns: 0

index 724f7fa7bae1..8b5600fbf013 100644
@@ -56,7 +56,7 @@ To get and set the streaming parameters applications call the
 pointer to a struct :c:type:`v4l2_streamparm` which contains a
 union holding separate parameters for input and output devices.
 
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.7cm}|p{3.5cm}|p{10.1cm}|
 
 .. c:type:: v4l2_streamparm
 

@@ -85,10 +85,9 @@ union holding separate parameters for input and output devices.
       - ``raw_data``\ [200]
       - A place holder for future extensions.
     * - }
-      -
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_captureparm
 

@@ -147,7 +146,7 @@ union holding separate parameters for input and output devices.
 	the array to zero.
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_outputparm
 

@@ -207,7 +206,7 @@ union holding separate parameters for input and output devices.
 	the array to zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _parm-caps:
 

@@ -222,7 +221,7 @@ union holding separate parameters for input and output devices.
 	field.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _parm-flags:
 

index d72a0c716fca..3031256159c3 100644
@@ -45,7 +45,7 @@ with a pointer to this variable.
 
 .. c:type:: v4l2_priority
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. flat-table:: enum v4l2_priority
     :header-rows:  0

index 9a9e589cce77..2b5b27260741 100644
@@ -129,7 +129,7 @@ Selection targets and flags are documented in
 
 .. c:type:: v4l2_selection
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_selection
     :header-rows:  0

index b3f4dc71bb5d..839366919e15 100644
@@ -45,7 +45,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
 
 .. c:type:: v4l2_sliced_vbi_cap
 
-.. tabularcolumns:: |p{1.2cm}|p{4.2cm}|p{4.1cm}|p{4.0cm}|p{4.0cm}|
+.. tabularcolumns:: |p{1.4cm}|p{4.4cm}|p{4.5cm}|p{3.6cm}|p{3.6cm}|
 
 .. flat-table:: struct v4l2_sliced_vbi_cap
     :header-rows:  0

@@ -122,7 +122,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
 
     \scriptsize
 
-.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.4cm}|
 
 .. _vbi-services:
 

@@ -170,6 +170,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
       - 0x4401
       - :cspan:`2` Set of services applicable to 625 line systems.
 
+
 .. raw:: latex
 
     \normalsize

index 116e66c01556..d392e37f080d 100644
@@ -59,7 +59,7 @@ to zero. The term 'tuner' means SDR receiver in this context.
 To change the radio frequency the
 :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
 
- .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{6.6cm}|p{6.6cm}|
+ .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{7.0cm}|p{5.8cm}|
 
 .. c:type:: v4l2_tuner
 

@@ -182,7 +182,7 @@ To change the radio frequency the
 	Drivers and applications must set the array to zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. c:type:: v4l2_tuner_type
 

@@ -205,7 +205,7 @@ To change the radio frequency the
       - 5
       - Tuner controls the RF part of a Software Digital Radio (SDR)
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.0cm}|p{2.2cm}|p{8.1cm}|
 
 .. _tuner-capability:
 

@@ -296,10 +296,10 @@ To change the radio frequency the
 	instead of 62.5 kHz.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
 .. _tuner-rxsubchans:
 
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
+
 .. flat-table:: Tuner Audio Reception Flags
     :header-rows:  0
     :stub-columns: 0

@@ -334,7 +334,7 @@ To change the radio frequency the
       - The tuner receives an RDS channel.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _tuner-audmode:
 

index b512b1fbf9a3..63e23f6f95ee 100644
@@ -38,10 +38,12 @@ pointer to a struct :c:type:`v4l2_capability` which is
 filled by the driver. When the driver is not compatible with this
 specification the ioctl returns an ``EINVAL`` error code.
 
-.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}|
-
 .. c:type:: v4l2_capability
 
+.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{13.1cm}|
+
+.. cssclass:: longtable
+
 .. flat-table:: struct v4l2_capability
     :header-rows:  0
     :stub-columns: 0

@@ -130,7 +132,7 @@ specification the ioctl returns an ``EINVAL`` error code.
 	zero.
 
 
-.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.0cm}|p{2.6cm}|p{7.7cm}|
 
 .. _device-capabilities:
 

index 82f61f1e2fb8..583fa551f0a1 100644
@@ -94,7 +94,7 @@ inclusive.
 
 See also the examples in :ref:`control`.
 
-.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.5cm}|
 
 .. _v4l2-queryctrl:
 

@@ -172,7 +172,7 @@ See also the examples in :ref:`control`.
 	zero.
 
 
-.. tabularcolumns:: |p{1.2cm}|p{5.0cm}|p{11.3cm}|
+.. tabularcolumns:: |p{1.2cm}|p{5.5cm}|p{10.6cm}|
 
 .. _v4l2-query-ext-ctrl:
 

@@ -272,7 +272,7 @@ See also the examples in :ref:`control`.
 	the array to zero.
 
 
-.. tabularcolumns:: |p{1.2cm}|p{1.0cm}|p{1.7cm}|p{13.0cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.1cm}|
 
 .. _v4l2-querymenu:
 

@@ -306,11 +306,14 @@ See also the examples in :ref:`control`.
       - Reserved for future extensions. Drivers must set the array to
 	zero.
 
-
-.. tabularcolumns:: |p{5.8cm}|p{1.4cm}|p{1.0cm}|p{1.4cm}|p{6.9cm}|
-
 .. c:type:: v4l2_ctrl_type
 
+.. raw:: latex
+
+   \footnotesize
+
+.. tabularcolumns:: |p{6.5cm}|p{1.5cm}|p{1.1cm}|p{1.5cm}|p{6.8cm}|
+
 .. cssclass:: longtable
 
 .. flat-table:: enum v4l2_ctrl_type

@@ -487,10 +490,14 @@ See also the examples in :ref:`control`.
       - A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC
 	slice parameters for stateless video decoders.
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. raw:: latex
+
+   \normalsize
 
 .. _control-flags:
 
+.. tabularcolumns:: |p{7.3cm}|p{1.8cm}|p{8.2cm}|
+
 .. cssclass:: longtable
 
 .. flat-table:: Control Flags

index c1c88e00b106..50ea72043bb0 100644
@@ -71,7 +71,7 @@ aborting or finishing any DMA in progress, an implicit
 
 .. c:type:: v4l2_requestbuffers
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_requestbuffers
     :header-rows:  0

@@ -109,8 +109,6 @@ aborting or finishing any DMA in progress, an implicit
       - A place holder for future extensions. Drivers and applications
 	must set the array to zero.
 
-.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
-
 .. _v4l2-buf-capabilities:
 .. _V4L2-BUF-CAP-SUPPORTS-MMAP:
 .. _V4L2-BUF-CAP-SUPPORTS-USERPTR:

@@ -120,6 +118,12 @@ aborting or finishing any DMA in progress, an implicit
 .. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF:
 .. _V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS:
 
+.. raw:: latex
+
+   \footnotesize
+
+.. tabularcolumns:: |p{8.1cm}|p{2.2cm}|p{7.0cm}|
+
 .. cssclass:: longtable
 
 .. flat-table:: V4L2 Buffer Capabilities Flags

@@ -157,6 +161,10 @@ aborting or finishing any DMA in progress, an implicit
         :ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and
         :ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`.
 
+.. raw:: latex
+
+   \normalsize
+
 Return Value
 ============
 

index 1948f31c2dbc..ed10f380579a 100644
@@ -58,7 +58,7 @@ set.
 If this ioctl is called from a non-blocking filehandle, then ``EAGAIN``
 error code is returned and no seek takes place.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_hw_freq_seek
 

index 17acf3fd8396..3703943b412f 100644
@@ -61,7 +61,7 @@ multiple pads of the same sub-device is not defined.
 
 .. c:type:: v4l2_subdev_frame_interval_enum
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_subdev_frame_interval_enum
     :header-rows:  0

index 8016fba7023f..c25a9896df0e 100644
@@ -63,7 +63,7 @@ information about try formats.
 
 .. c:type:: v4l2_subdev_frame_size_enum
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_subdev_frame_size_enum
     :header-rows:  0

index 1fd950e34a0b..4c8d5a15fd29 100644
@@ -48,7 +48,7 @@ information about the try formats.
 
 .. c:type:: v4l2_subdev_mbus_code_enum
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_subdev_mbus_code_enum
     :header-rows:  0

@@ -79,10 +79,14 @@ information about the try formats.
 
 
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{7.7cm}|
-
 .. _v4l2-subdev-mbus-code-flags:
 
+.. raw:: latex
+
+   \footnotesize
+
+.. tabularcolumns:: |p{8.8cm}|p{2.2cm}|p{6.3cm}|
+
 .. flat-table:: Subdev Media Bus Code Enumerate Flags
     :header-rows:  0
     :stub-columns: 0

@@ -124,6 +128,10 @@ information about the try formats.
 	ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set.
 	See :ref:`v4l2-mbus-format` on how to do this.
 
+.. raw:: latex
+
+   \normalsize
+
 Return Value
 ============
 

index 2d78b4f5928d..bd15c0a5a66b 100644
@@ -78,7 +78,7 @@ modified format should be as close as possible to the original request.
 
 .. c:type:: v4l2_subdev_crop
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_subdev_crop
     :header-rows:  0

index 90b9bbfb61dd..7acdbb939d89 100644
@@ -81,7 +81,7 @@ doesn't match the device capabilities. They must instead modify the
 format to match what the hardware can provide. The modified format
 should be as close as possible to the original request.
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. c:type:: v4l2_subdev_format
 

@@ -107,7 +107,7 @@ should be as close as possible to the original request.
 	the array to zero.
 
 
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
 
 .. _v4l2-subdev-format-whence:
 

index 3a50f8b2843d..d7fe7543c506 100644
@@ -76,7 +76,7 @@ the same sub-device is not defined.
 
 .. c:type:: v4l2_subdev_frame_interval
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_subdev_frame_interval
     :header-rows:  0

index f35b9562df21..f9172a42f036 100644
@@ -70,7 +70,7 @@ Selection targets and flags are documented in
 
 .. c:type:: v4l2_subdev_selection
 
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
 
 .. flat-table:: struct v4l2_subdev_selection
     :header-rows:  0

index 949d9775b03d..9b8d8644ec0f 100644
@@ -38,7 +38,7 @@ a struct :c:type:`v4l2_subdev_capability` which is filled by the driver. When
 the driver is not compatible with this specification the ioctl returns
 ``ENOTTY`` error code.
 
-.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}|
+.. tabularcolumns:: |p{1.5cm}|p{2.9cm}|p{12.9cm}|
 
 .. c:type:: v4l2_subdev_capability
 

@@ -75,7 +75,7 @@ the driver is not compatible with this specification the ioctl returns
       - ``reserved``\ [14]
       - Reserved for future extensions. Set to 0 by the V4L2 core.
 
-.. tabularcolumns:: |p{6cm}|p{2.2cm}|p{8.8cm}|
+.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.1cm}|
 
 .. _subdevice-capabilities:
 

index d1ad35164033..a6fc3c5fe99d 100644
@@ -39,7 +39,7 @@ Description
 Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by
 using the :ref:`VIDIOC_DQEVENT` ioctl.
 
-.. tabularcolumns:: |p{4.6cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{2.6cm}|p{4.4cm}|p{10.3cm}|
 
 .. c:type:: v4l2_event_subscription
 

@@ -71,7 +71,7 @@ using the :ref:`VIDIOC_DQEVENT` ioctl.
 	the array to zero.
 
 
-.. tabularcolumns:: |p{6.8cm}|p{2.2cm}|p{8.5cm}|
+.. tabularcolumns:: |p{7.5cm}|p{2.0cm}|p{7.8cm}|
 
 .. _event-flags: