Skip to contentSkip to conversation

i40e/ice AF_XDP ZC fixes

PATCH Applied Björn Töpel 2 participants 4 messages Dec 11, 2020 – Dec 16, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover i40e/ice AF_XDP ZC fixes

This series address two crashes in the AF_XDP zero-copy mode for ice and i40e. More details in each individual the commit message.

Thanks,
Bj?rn

Bj?rn T?pel (2):
ice, xsk: clear the status bits for the next_to_use descriptor i40e, xsk: clear the status bits for the next_to_use descriptor

 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 5 ++++-
 drivers/net/ethernet/intel/ice/ice_xsk.c   | 5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

base-commit: d9838b1d39283c1200c13f9076474c7624b8ec34

Signature · 1 line
2.27.0
#1 lore raw

PATCH 1/2 ice, xsk: clear the status bits for the next_to_use descriptor

From: Bj?rn T?pel <[email protected]>

On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed.

When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered.

If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed.

The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that.

This change adds the status bits clearing of the next_to_use descriptor.

Fixes 2d4238f55697 ("ice: Add support for AF_XDP")
---
 drivers/net/ethernet/intel/ice/ice_xsk.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_xsk.c +4 -1
index 797886524054..98101a8e2952 100644
@@ -446,8 +446,11 @@ bool ice_alloc_rx_bufs_zc(struct ice_ring *rx_ring, u16 count)
 		}
 	} while (--count);
 
-	if (rx_ring->next_to_use != ntu)
+	if (rx_ring->next_to_use != ntu) {
+		/* clear the status bits for the next_to_use descriptor */
+		rx_desc->wb.status_error0 = 0;
 		ice_release_rx_desc(rx_ring, ntu);
+	}
 
 	return ret;
 }
Signature · 1 line
2.27.0
#2 lore raw

PATCH 2/2 i40e, xsk: clear the status bits for the next_to_use descriptor

In reply to Björn Töpel

From: Bj?rn T?pel <[email protected]>

On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed.

When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered.

If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed.

The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that.

This change adds the status bits clearing of the next_to_use descriptor.

Fixes 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL")
---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/i40e/i40e_xsk.c +4 -1
index 567fd67e900e..e402c62eb313 100644
@@ -219,8 +219,11 @@ bool i40e_alloc_rx_buffers_zc(struct i40e_ring *rx_ring, u16 count)
 	} while (count);
 
 no_buffers:
-	if (rx_ring->next_to_use != ntu)
+	if (rx_ring->next_to_use != ntu) {
+		/* clear the status bits for the next_to_use descriptor */
+		rx_desc->wb.qword1.status_error_len = 0;
 		i40e_release_rx_desc(rx_ring, ntu);
+	}
 
 	return ok;
 }
Signature · 1 line
2.27.0
maintainer Applied
#3 lore raw
In reply to Björn Töpel
Quoted 2 lines · On Fri, 11 Dec 2020 15:57:10 +0100 Bj?rn T?pel wrote:

This series address two crashes in the AF_XDP zero-copy mode for ice and i40e. More details in each individual the commit message.

Applied, queued. Thanks!