Serial: silabs si4455 serial driver

new file mode 100644
index 000000000000..ddff67e6a667
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/silabs,si4455.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Silicon Labs Si4455 device tree bindings
+
+maintainers:
+  - József Horváth <[email protected]>
+
+description:
+  This document is for describing the required device tree parameters for si4455 serial driver.
+  The si4455 driver tries to represent the Silicon Labs Si4455 sub-GHz transceiver device
+  like a serial port. The required parameters for proper operation are described below.
+  https://www.silabs.com/documents/public/data-sheets/Si4455.pdf
+
+allOf:
+  - $ref: "serial.yaml#"
+
+properties:
+  compatible:
+    const: silabs,si4455
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    description: maximum clock frequency on SPI port
+    maximum: 500000
+
+  shutdown-gpios:
+    description: gpio pin for SDN
+    maxItems: 1
+
+  silabs,package-size:
+    description:
+      Radio payload length, variable packet length is not supported by driver.
+      This value should equal with EZConfig payload length.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 64
+    minimum: 1
+
+  silabs,tx-channel:
+    description:
+      Radio transmit channel selection.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    minimum: 0
+
+  silabs,rx-channel:
+    description:
+      Radio receive channel selection.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    minimum: 0
+
+  silabs,ez-config:
+    description:
+      Radio configuration data file name.
+    $ref: /schemas/types.yaml#/definitions/string
+    items:
+      pattern: ^[0-9a-z\._\-]{1,255}$
+
+required:
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - shutdown-gpios
+  - silabs,package-size
+  - silabs,tx-channel
+  - silabs,rx-channel
+  - silabs,ez-config
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      si4455_0: serial@0 {
+        compatible = "silabs,si4455";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <7 2>;
+        shutdown-gpios = <&gpio 26 1>;
+        spi-max-frequency = <300000>;
+        silabs,package-size = <30>;
+        silabs,tx-channel = <1>;
+        silabs,rx-channel = <2>;
+        silabs,ez-config = "si4455_spi0_0.ez.bin";
+      };
+    };
+...

index a008b70f3c16..47d87a0c8aa4 100644
@@ -15952,6 +15952,13 @@ M:	Jérôme Pouiller <[email protected]>
 S:	Supported
 F:	drivers/staging/wfx/
 
+SILICON LABS SI4455 SERIAL DRIVER
+M:	József Horváth <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/staging/serial/silabs,si4455.yaml
+F:	drivers/tty/serial/si4455.c
+F:	drivers/tty/serial/si4455_api.h
+
 SILICON MOTION SM712 FRAME BUFFER DRIVER
 M:	Sudip Mukherjee <[email protected]>
 M:	Teddy Wang <[email protected]>

index 28f22e58639c..560aa311cd03 100644
@@ -1583,6 +1583,14 @@ config SERIAL_MILBEAUT_USIO_CONSOLE
 	  receives all kernel messages and warnings and which allows logins in
 	  single user mode).
 
+config SERIAL_SI4455
+	tristate "Si4455 support"
+	depends on SPI
+	select SERIAL_CORE
+	help
+	  This driver is for Silicon Labs's Si4455 Sub-GHz transciver.
+	  Say 'Y' here if you wish to use it as serial port.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO

index caf167f0c10a..2a3076b98c78 100644
@@ -90,6 +90,7 @@ obj-$(CONFIG_SERIAL_OWL)	+= owl-uart.o
 obj-$(CONFIG_SERIAL_RDA)	+= rda-uart.o
 obj-$(CONFIG_SERIAL_MILBEAUT_USIO) += milbeaut_usio.o
 obj-$(CONFIG_SERIAL_SIFIVE)	+= sifive.o
+obj-$(CONFIG_SERIAL_SI4455) += si4455.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o