Skip to contentSkip to conversation

drm/tegra: replace idr_init() by idr_init_base()

PATCH New Sasha Levin 1 participant 14 messages Dec 12, 2020

Subsystems (8)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/14 drm/tegra: replace idr_init() by idr_init_base()

From: Deepak R Varma <[email protected]>

[ Upstream commit 41f71629b4c432f8dd47d70ace813be5f79d4d75 ]

idr_init() uses base 0 which is an invalid identifier for this driver. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

---
 drivers/gpu/drm/tegra/drm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/tegra/drm.c +1 -1
index bc7cc32140f81..6833dfad7241b 100644
@@ -256,7 +256,7 @@ static int tegra_drm_open(struct drm_device *drm, struct drm_file *filp)
 	if (!fpriv)
 		return -ENOMEM;
 
-	idr_init(&fpriv->contexts);
+	idr_init_base(&fpriv->contexts, 1);
 	mutex_init(&fpriv->lock);
 	filp->driver_priv = fpriv;
 
Signature · 6 lines
2.27.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#1 lore raw

PATCH 2/14 kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling

From: Nicholas Piggin <[email protected]>

[ Upstream commit 8ff00399b153440c1c83e20c43020385b416415b ]

powerpc/64s keeps a counter in the mm which counts bits set in mm_cpumask as well as other things. This means it can't use generic code to clear bits out of the mask and doesn't adjust the arch specific counter.

Add an arch override that allows powerpc/64s to use clear_tasks_mm_cpumask().

---
 kernel/cpu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
kernel/cpu.c +5 -1
index 7527825ac7daa..fa0e5727b4d9c 100644
@@ -815,6 +815,10 @@ void __init cpuhp_threads_init(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+#ifndef arch_clear_mm_cpumask_cpu
+#define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm))
+#endif
+
 /**
  * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
  * @cpu: a CPU id
@@ -850,7 +854,7 @@ void clear_tasks_mm_cpumask(int cpu)
 		t = find_lock_task_mm(p);
 		if (!t)
 			continue;
-		cpumask_clear_cpu(cpu, mm_cpumask(t->mm));
+		arch_clear_mm_cpumask_cpu(cpu, t->mm);
 		task_unlock(t);
 	}
 	rcu_read_unlock();
Signature · 1 line
2.27.0
author maintainer
#2 lore raw

PATCH 3/14 drm/tegra: sor: Disable clocks on error in tegra_sor_init()

In reply to Sasha Levin

From: Qinglang Miao <[email protected]>

[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ]

Fix the missing clk_disable_unprepare() before return from tegra_sor_init() in the error handling case.

---
 drivers/gpu/drm/tegra/sor.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/gpu/drm/tegra/sor.c +8 -2
index 75e65d9536d54..6c3d221652393 100644
@@ -2899,6 +2899,7 @@ static int tegra_sor_init(struct host1x_client *client)
 		if (err < 0) {
 			dev_err(sor->dev, "failed to deassert SOR reset: %d\n",
 				err);
+			clk_disable_unprepare(sor->clk);
 			return err;
 		}
 
@@ -2906,12 +2907,17 @@ static int tegra_sor_init(struct host1x_client *client)
 	}
 
 	err = clk_prepare_enable(sor->clk_safe);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	err = clk_prepare_enable(sor->clk_dp);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk_safe);
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	/*
 	 * Enable and unmask the HDA codec SCRATCH0 register interrupt. This
Signature · 6 lines
2.27.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#3 lore raw

PATCH 4/14 habanalabs: put devices before driver removal

In reply to Sasha Levin

From: Ofir Bitton <[email protected]>

[ Upstream commit 5555b7c56bdec7a29c789fec27f84d40f52fbdfa ]

Driver never puts its device and control_device objects, hence a memory leak is introduced every driver removal.

---
 drivers/misc/habanalabs/device.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/misc/habanalabs/device.c +8 -8
index a7a4fed4d8995..3eeb1920ddb43 100644
@@ -229,16 +229,16 @@ delete_cdev_device:
 
 static void device_cdev_sysfs_del(struct hl_device *hdev)
 {
-	/* device_release() won't be called so must free devices explicitly */
-	if (!hdev->cdev_sysfs_created) {
-		kfree(hdev->dev_ctrl);
-		kfree(hdev->dev);
-		return;
-	}
+	if (!hdev->cdev_sysfs_created)
+		goto put_devices;
 
 	hl_sysfs_fini(hdev);
 	cdev_device_del(&hdev->cdev_ctrl, hdev->dev_ctrl);
 	cdev_device_del(&hdev->cdev, hdev->dev);
+
+put_devices:
+	put_device(hdev->dev);
+	put_device(hdev->dev_ctrl);
 }
 
 /*
@@ -1285,9 +1285,9 @@ sw_fini:
 early_fini:
 	device_early_fini(hdev);
 free_dev_ctrl:
-	kfree(hdev->dev_ctrl);
+	put_device(hdev->dev_ctrl);
 free_dev:
-	kfree(hdev->dev);
+	put_device(hdev->dev);
 out_disabled:
 	hdev->disabled = true;
 	if (add_cdev_sysfs_on_err)
Signature · 1 line
2.27.0
author maintainer
#4 lore raw

PATCH 5/14 arm64: syscall: exit userspace before unmasking exceptions

In reply to Sasha Levin

From: Mark Rutland <[email protected]>

[ Upstream commit ca1314d73eed493c49bb1932c60a8605530db2e4 ]

In el0_svc_common() we unmask exceptions before we call user_exit(), and so there's a window where an IRQ or debug exception can be taken while RCU is not watching. In do_debug_exception() we account for this in via debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we call trace functions which rely on RCU before we have a guarantee that RCU is watching.

Let's avoid this by having el0_svc_common() exit userspace before unmasking exceptions, matching what we do for all other EL0 entry paths. We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ flags while we're sure exceptions are masked in DAIF.

The workaround for Cortex-A76 erratum 1463225 may trigger a debug exception before this point, but the debug code invoked in this case is safe even when RCU is not watching.

---
 arch/arm64/kernel/syscall.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/syscall.c +1 -1
index 1457a0ba83dbc..f2d2dbbbfca20 100644
@@ -102,8 +102,8 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	regs->syscallno = scno;
 
 	cortex_a76_erratum_1463225_svc_handler();
+	user_exit_irqoff();
 	local_daif_restore(DAIF_PROCCTX);
-	user_exit();
 
 	if (has_syscall_work(flags)) {
 		/* set default errno for user-issued syscall(-1) */
Signature · 7 lines
2.27.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#5 lore raw

PATCH 6/14 vxlan: Add needed_headroom for lower device

In reply to Sasha Levin

From: Sven Eckelmann <[email protected]>

[ Upstream commit 0a35dc41fea67ac4495ce7584406bf9557a6e7d0 ]

It was observed that sending data via batadv over vxlan (on top of wireguard) reduced the performance massively compared to raw ethernet or batadv on raw ethernet. A check of perf data showed that the vxlan_build_skb was calling all the time pskb_expand_head to allocate enough headroom for:

min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len
+ VXLAN_HLEN + iphdr_len;

But the vxlan_config_apply only requested needed headroom for:

lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM

So it completely ignored the needed_headroom of the lower device. The first caller of net_dev_xmit could therefore never make sure that enough headroom was allocated for the rest of the transmit path.

---
 drivers/net/vxlan.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/vxlan.c +1 -0
index 630ac00a34ede..3753cf0942865 100644
@@ -3538,6 +3538,7 @@ static void vxlan_config_apply(struct net_device *dev,
 		dev->gso_max_segs = lowerdev->gso_max_segs;
 
 		needed_headroom = lowerdev->hard_header_len;
+		needed_headroom += lowerdev->needed_headroom;
 
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
Signature · 1 line
2.27.0
author maintainer
#6 lore raw

PATCH 7/14 vxlan: Copy needed_tailroom from lowerdev

In reply to Sasha Levin

From: Sven Eckelmann <[email protected]>

[ Upstream commit a5e74021e84bb5eadf760aaf2c583304f02269be ]

While vxlan doesn't need any extra tailroom, the lowerdev might need it. In that case, copy it over to reduce the chance for additional (re)allocations in the transmit path.

---
 drivers/net/vxlan.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/vxlan.c +2 -0
index 3753cf0942865..5502e145aa17b 100644
@@ -3540,6 +3540,8 @@ static void vxlan_config_apply(struct net_device *dev,
 		needed_headroom = lowerdev->hard_header_len;
 		needed_headroom += lowerdev->needed_headroom;
 
+		dev->needed_tailroom = lowerdev->needed_tailroom;
+
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
 		if (max_mtu < ETH_MIN_MTU)
Signature · 1 line
2.27.0
author maintainer
#7 lore raw

PATCH 8/14 scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()

In reply to Sasha Levin

From: "Andrea Parri (Microsoft)" <[email protected]>

[ Upstream commit 3b8c72d076c42bf27284cda7b2b2b522810686f8 ]

Check that the packet is of the expected size at least, don't copy data past the packet.

---
 drivers/scsi/storvsc_drv.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/scsi/storvsc_drv.c +5 -0
index 5087ed6afbdc3..9f78630e332f9 100644
@@ -1170,6 +1170,11 @@ static void storvsc_on_channel_callback(void *context)
 		request = (struct storvsc_cmd_request *)
 			((unsigned long)desc->trans_id);
 
+		if (hv_pkt_datalen(desc) < sizeof(struct vstor_packet) - vmscsi_size_delta) {
+			dev_err(&device->device, "Invalid packet len\n");
+			continue;
+		}
+
 		if (request == &stor_device->init_request ||
 		    request == &stor_device->reset_request) {
 			memcpy(&request->vstor_packet, packet,
Signature · 1 line
2.27.0
author maintainer
#8 lore raw

PATCH 9/14 scsi: mpt3sas: Increase IOCInit request timeout to 30s

In reply to Sasha Levin

From: Sreekanth Reddy <[email protected]>

[ Upstream commit 85dad327d9b58b4c9ce08189a2707167de392d23 ]

Currently the IOCInit request message timeout is set to 10s. This is not sufficient in some scenarios such as during HBA FW downgrade operations.

Increase the IOCInit request timeout to 30s.

---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/mpt3sas/mpt3sas_base.c +1 -1
index 8be8c510fdf79..7532603aafb15 100644
@@ -6227,7 +6227,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
 
 	r = _base_handshake_req_reply_wait(ioc,
 	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
-	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10);
+	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 30);
 
 	if (r != 0) {
 		ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r);
Signature · 1 line
2.27.0
author maintainer
#9 lore raw

PATCH 10/14 dm table: Remove BUG_ON(in_interrupt())

In reply to Sasha Levin

From: Thomas Gleixner <[email protected]>

[ Upstream commit e7b624183d921b49ef0a96329f21647d38865ee9 ]

The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from a rework of the dm table code which changed the calling context.

Issuing a BUG for a wrong calling context is frowned upon and in_interrupt() is deprecated and only covering parts of the wrong contexts. The sanity check for the context is covered by CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.

---
 drivers/md/dm-table.c | 6 ------
 1 file changed, 6 deletions(-)
drivers/md/dm-table.c +0 -6
index 13ad791126618..6dd56afa048c2 100644
@@ -1320,12 +1320,6 @@ void dm_table_event_callback(struct dm_table *t,
 
 void dm_table_event(struct dm_table *t)
 {
-	/*
-	 * You can no longer call dm_table_event() from interrupt
-	 * context, use a bottom half instead.
-	 */
-	BUG_ON(in_interrupt());
-
 	mutex_lock(&_event_lock);
 	if (t->event_fn)
 		t->event_fn(t->event_context);
Signature · 7 lines
2.27.0


--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
author maintainer
#10 lore raw

PATCH 11/14 iwlwifi: pcie: add one missing entry for AX210

In reply to Sasha Levin

From: Luca Coelho <[email protected]>

[ Upstream commit 5febcdef30902fa870128b9789b873199f13aff1 ]

The 0x0024 subsytem device ID was missing from the list, so some AX210 devices were not recognized. Add it.

---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/intel/iwlwifi/pcie/drv.c +1 -0
index b0b7eca1754ed..f34297fd453c0 100644
@@ -968,6 +968,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
 
 	{IWL_PCI_DEVICE(0x2725, 0x0090, iwlax211_2ax_cfg_so_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0020, iwlax210_2ax_cfg_ty_gf_a0)},
+	{IWL_PCI_DEVICE(0x2725, 0x0024, iwlax210_2ax_cfg_ty_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0310, iwlax210_2ax_cfg_ty_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0510, iwlax210_2ax_cfg_ty_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0A10, iwlax210_2ax_cfg_ty_gf_a0)},
Signature · 1 line
2.27.0
author maintainer
#11 lore raw

PATCH 12/14 drm/amd/display: Init clock value by current vbios CLKs

In reply to Sasha Levin

From: Brandon Syu <[email protected]>

[ Upstream commit 7e0b367db85ef7b91399006253759a024eab7653 ]

[Why]
While booting into OS, driver updates DPP/DISP CLKs. But init clock value is zero which is invalid.

[How]
Get current clocks value to update init clocks. To avoid underflow.

---
 .../drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c   | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c +11 -2
index dd92f9c295b45..9f301f8575a54 100644
@@ -97,8 +97,17 @@ void rn_update_clocks(struct clk_mgr *clk_mgr_base,
 			new_clocks->dppclk_khz = 100000;
 	}
 
-	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->base.clks.dppclk_khz)) {
-		if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz)
+	/*
+	 * Temporally ignore thew 0 cases for disp and dpp clks.
+	 * We may have a new feature that requires 0 clks in the future.
+	 */
+	if (new_clocks->dppclk_khz == 0 || new_clocks->dispclk_khz == 0) {
+		new_clocks->dppclk_khz = clk_mgr_base->clks.dppclk_khz;
+		new_clocks->dispclk_khz = clk_mgr_base->clks.dispclk_khz;
+	}
+
+	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr_base->clks.dppclk_khz)) {
+		if (clk_mgr_base->clks.dppclk_khz > new_clocks->dppclk_khz)
 			dpp_clock_lowered = true;
 		clk_mgr_base->clks.dppclk_khz = new_clocks->dppclk_khz;
 		update_dppclk = true;
Signature · 6 lines
2.27.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#12 lore raw

PATCH 13/14 perf/x86/intel: Check PEBS status correctly

In reply to Sasha Levin

From: Stephane Eranian <[email protected]>

[ Upstream commit fc17db8aa4c53cbd2d5469bb0521ea0f0a6dbb27 ]

The kernel cannot disambiguate when 2+ PEBS counters overflow at the same time. This is what the comment for this code suggests. However, I see the comparison is done with the unfiltered p->status which is a copy of IA32_PERF_GLOBAL_STATUS at the time of the sample. This register contains more than the PEBS counter overflow bits. It also includes many other bits which could also be set.

---
 arch/x86/events/intel/ds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/events/intel/ds.c +1 -1
index 1aaba2c8a9ba6..eb8bd0eeace7d 100644
@@ -1912,7 +1912,7 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 		 * that caused the PEBS record. It's called collision.
 		 * If collision happened, the record will be dropped.
 		 */
-		if (p->status != (1ULL << bit)) {
+		if (pebs_status != (1ULL << bit)) {
 			for_each_set_bit(i, (unsigned long *)&pebs_status, size)
 				error[i]++;
 			continue;
Signature · 1 line
2.27.0
author maintainer
#13 lore raw

PATCH 14/14 kbuild: avoid split lines in .mod files

In reply to Sasha Levin

From: Masahiro Yamada <[email protected]>

[ Upstream commit 7d32358be8acb119dcfe39b6cf67ec6d94bf1fe7 ]

"xargs echo" is not a safe way to remove line breaks because the input may exceed the command line limit and xargs may break it up into multiple invocations of echo. This should never happen because scripts/gen_autoksyms.sh expects all undefined symbols are placed in the second line of .mod files.

One possible way is to replace "xargs echo" with
"sed ':x;N;$!bx;s/\n/ /g'" or something, but I rewrote the code by using awk because it is more readable.

This issue was reported by Sami Tolvanen; in his Clang LTO patch set, $(multi-used-m) is no longer an ELF object, but a thin archive that contains LLVM bitcode files. llvm-nm prints out symbols for each archive member separately, which results a lot of dupications, in some places, beyond the system-defined limit.

This problem must be fixed irrespective of LTO, and we must ensure zero possibility of having this issue.

---
 scripts/Makefile.build | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
scripts/Makefile.build +4 -8
index 24a33c01bbf7c..9c689d011bced 100644
@@ -234,6 +234,9 @@ objtool_dep = $(objtool_obj)					\
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 cmd_gen_ksymdeps = \
 	$(CONFIG_SHELL) $(srctree)/scripts/gen_ksymdeps.sh $@ >> $(dot-target).cmd
+
+# List module undefined symbols
+undefined_syms = $(NM) $< | $(AWK) '$$1 == "U" { printf("%s%s", x++ ? " " : "", $$2) }';
 endif
 
 define rule_cc_o_c
@@ -253,13 +256,6 @@ define rule_as_o_S
 	$(call cmd,modversions_S)
 endef
 
-# List module undefined symbols (or empty line if not enabled)
-ifdef CONFIG_TRIM_UNUSED_KSYMS
-cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | xargs echo
-else
-cmd_undef_syms = echo
-endif
-
 # Built-in and composite module parts
 $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
 	$(call cmd,force_checksrc)
@@ -267,7 +263,7 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
 
 cmd_mod = { \
 	echo $(if $($*-objs)$($*-y)$($*-m), $(addprefix $(obj)/, $($*-objs) $($*-y) $($*-m)), $(@:.mod=.o)); \
-	$(cmd_undef_syms); \
+	$(undefined_syms) echo; \
 	} > $@
 
 $(obj)/%.mod: $(obj)/%.o FORCE
Signature · 1 line
2.27.0