media: rkisp1: isp: Add the enum_frame_size ioctl
Subsystems (3)
PATCH v3 1/1 media: rkisp1: isp: Add the enum_frame_size ioctl
Implement the VIDIOC_SUBDEV_ENUM_FRAME_SIZE ioctl for the isp entity, check if the mbus code is valid for the given pad.
This call is not available for the parameter or metadata pads of the RkISP1.
---
v1: https://patchwork.kernel.org/project/linux-media/patch/[email protected]/
v2: https://patchwork.kernel.org/project/linux-media/patch/[email protected]/
Changes since v2:
- Change the return code for the parameter and metadata pads to -ENOTTY instead of -EINVAL as this reports that the pad doesn't support the ioctl
- Highlight more clearly that this patch is for the isp entity of the rkisp1, within the commit description as well as in the commit title
- Add the correct v4l2-complience output to the patch mail
Changes since v1:
- Replace the custom bus code check with the rkisp1_isp_mbus_info_get function
- Add a missing line break above the function
I have tested this patch with the following script:
http://paste.debian.net/1176614/
The results on my NanoPC-T4 (Linux nanopct4 5.10.0-rc6-rockchip64):
pad 0 = RKISP1_ISP_PAD_SINK_VIDEO
pad 1 = RKISP1_ISP_PAD_SINK_PARAMS
pad 2 = RKISP1_ISP_PAD_SOURCE_VIDEO
pad 3 = RKISP1_ISP_PAD_SOURCE_STATS
basti@nanopct4:~$ python3 rkisp1_enum_frame_size_test.py TEST 0: pad 0 - code 0x300f - size 32x32 - 4032x3024 TEST 1: pad 0 - code 0x3007 - size 32x32 - 4032x3024 TEST 2: pad 0 - code 0x300e - size 32x32 - 4032x3024 TEST 3: pad 0 - code 0x300a - size 32x32 - 4032x3024 TEST 4: pad 0 - code 0x3012 - size 32x32 - 4032x3024 TEST 5: pad 0 - code 0x3008 - size 32x32 - 4032x3024 TEST 6: pad 0 - code 0x3010 - size 32x32 - 4032x3024 TEST 7: pad 0 - code 0x3011 - size 32x32 - 4032x3024 TEST 8: pad 0 - code 0x3014 - size 32x32 - 4032x3024 TEST 9: pad 0 - code 0x3001 - size 32x32 - 4032x3024 TEST 10: pad 0 - code 0x3013 - size 32x32 - 4032x3024 TEST 11: pad 0 - code 0x3002 - size 32x32 - 4032x3024 TEST 12: pad 0 - code 0x2011 - size 32x32 - 4032x3024 TEST 13: pad 0 - code 0x2012 - size 32x32 - 4032x3024 TEST 14: pad 0 - code 0x200f - size 32x32 - 4032x3024 TEST 15: pad 0 - code 0x2010 - size 32x32 - 4032x3024 TEST 16: pad 1 - code 0x7001 - size / TEST 17: pad 2 - code 0x2008 - size 32x32 - 4032x3024 TEST 18: pad 2 - code 0x300f - size 32x32 - 4032x3024 TEST 19: pad 2 - code 0x3007 - size 32x32 - 4032x3024 TEST 20: pad 2 - code 0x300e - size 32x32 - 4032x3024 TEST 21: pad 2 - code 0x300a - size 32x32 - 4032x3024 TEST 22: pad 2 - code 0x3012 - size 32x32 - 4032x3024 TEST 23: pad 2 - code 0x3008 - size 32x32 - 4032x3024 TEST 24: pad 2 - code 0x3010 - size 32x32 - 4032x3024 TEST 25: pad 2 - code 0x3011 - size 32x32 - 4032x3024 TEST 26: pad 2 - code 0x3014 - size 32x32 - 4032x3024 TEST 27: pad 2 - code 0x3001 - size 32x32 - 4032x3024 TEST 28: pad 2 - code 0x3013 - size 32x32 - 4032x3024 TEST 29: pad 2 - code 0x3002 - size 32x32 - 4032x3024 TEST 30: pad 3 - code 0x7001 - size / TEST 31: pad 0 - code 0xdead - size / (test with an invalid media bus code) TEST 32: pad 6 - code 0x300f - size / (test with an invalid pad) TEST 33: pad 0 - code 0x2008 - size / (test with a format that is not supported by the pad) TEST 34: pad 2 - code 0x2010 - size / (test with a format that is not supported by the pad)
And here is the output from v4l2-compliance --device /dev/v4l-subdev0:
Media Driver Info:
Driver name : rkisp1
...
Name : rkisp1_isp
...
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
...
Sub-Device ioctls (Sink Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348): checkMBusFrameFmt(node, fmt.format)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348): checkMBusFrameFmt(node, fmt.format)
...
Sub-Device ioctls (Source Pad 2):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
...
Sub-Device ioctls (Source Pad 3):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348): checkMBusFrameFmt(node, fmt.format)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348): checkMBusFrameFmt(node, fmt.format)
...
...
As reported by Dafna Hirschfeld from v2 the errors on pad 1 & 3 are caused by a problem within v4l2-utils.
--- .../platform/rockchip/rkisp1/rkisp1-isp.c | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)
drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c +34 -0
@@ -600,6 +600,39 @@ static int rkisp1_isp_enum_mbus_code(struct v4l2_subdev *sd,return -EINVAL ; } +static int rkisp1_isp_enum_frame_size (struct v4l2_subdev *sd, +struct v4l2_subdev_pad_config *cfg, +struct v4l2_subdev_frame_size_enum *fse) +{ +const struct rkisp1_isp_mbus_info *mbus_info; + +if (fse->pad ==RKISP1_ISP_PAD_SINK_PARAMS || + fse->pad ==RKISP1_ISP_PAD_SOURCE_STATS ) +return -ENOTTY ; + +if (fse->index >0 ) +return -EINVAL ; + + mbus_info =rkisp1_isp_mbus_info_get (fse->code); +if (!mbus_info) +return -EINVAL ; + +if (!(mbus_info->direction &RKISP1_ISP_SD_SINK ) && + fse->pad ==RKISP1_ISP_PAD_SINK_VIDEO ) +return -EINVAL ; + +if (!(mbus_info->direction &RKISP1_ISP_SD_SRC ) && + fse->pad ==RKISP1_ISP_PAD_SOURCE_VIDEO ) +return -EINVAL ; + + fse->min_width =RKISP1_ISP_MIN_WIDTH ; + fse->max_width =RKISP1_ISP_MAX_WIDTH ; + fse->min_height =RKISP1_ISP_MIN_HEIGHT ; + fse->max_height =RKISP1_ISP_MAX_HEIGHT ; + +return 0 ; +} +static int rkisp1_isp_init_config (struct v4l2_subdev *sd,struct v4l2_subdev_pad_config *cfg) {
@@ -880,6 +913,7 @@ static int rkisp1_subdev_link_validate(struct media_link *link)static const struct v4l2_subdev_pad_ops rkisp1_isp_pad_ops = { .enum_mbus_code = rkisp1_isp_enum_mbus_code, + .enum_frame_size = rkisp1_isp_enum_frame_size, .get_selection = rkisp1_isp_get_selection, .set_selection = rkisp1_isp_set_selection, .init_cfg = rkisp1_isp_init_config,
Signature · 1 line
2.20.1
Am 12.12.20 um 19:53 schrieb Sebastian Fricke:
Quoted 158 lines
Implement the
VIDIOC_SUBDEV_ENUM_FRAME_SIZEioctl for the isp entity, check if the mbus code is valid for the given pad.
This call is not available for the parameter or metadata pads of the RkISP1.Signed-off-by Sebastian Fricke <[email protected]>---
v1: https://patchwork.kernel.org/project/linux-media/patch/[email protected]/
v2: https://patchwork.kernel.org/project/linux-media/patch/[email protected]/Changes since v2:
- Change the return code for the parameter and metadata pads to-ENOTTYinstead of-EINVALas this reports that the pad doesn't support the ioctl
- Highlight more clearly that this patch is for the isp entity of the rkisp1, within the commit description as well as in the commit title
- Add the correct v4l2-complience output to the patch mailChanges since v1:
- Replace the custom bus code check with therkisp1_isp_mbus_info_getfunction
- Add a missing line break above the functionI have tested this patch with the following script:
http://paste.debian.net/1176614/The results on my NanoPC-T4 (Linux nanopct4 5.10.0-rc6-rockchip64):
pad 0 =
RKISP1_ISP_PAD_SINK_VIDEO
pad 1 =RKISP1_ISP_PAD_SINK_PARAMS
pad 2 =RKISP1_ISP_PAD_SOURCE_VIDEO
pad 3 =RKISP1_ISP_PAD_SOURCE_STATSbasti@nanopct4:~$ python3 rkisp1_enum_frame_size_test.py TEST 0: pad 0 - code 0x300f - size 32x32 - 4032x3024 TEST 1: pad 0 - code 0x3007 - size 32x32 - 4032x3024 TEST 2: pad 0 - code 0x300e - size 32x32 - 4032x3024 TEST 3: pad 0 - code 0x300a - size 32x32 - 4032x3024 TEST 4: pad 0 - code 0x3012 - size 32x32 - 4032x3024 TEST 5: pad 0 - code 0x3008 - size 32x32 - 4032x3024 TEST 6: pad 0 - code 0x3010 - size 32x32 - 4032x3024 TEST 7: pad 0 - code 0x3011 - size 32x32 - 4032x3024 TEST 8: pad 0 - code 0x3014 - size 32x32 - 4032x3024 TEST 9: pad 0 - code 0x3001 - size 32x32 - 4032x3024 TEST 10: pad 0 - code 0x3013 - size 32x32 - 4032x3024 TEST 11: pad 0 - code 0x3002 - size 32x32 - 4032x3024 TEST 12: pad 0 - code 0x2011 - size 32x32 - 4032x3024 TEST 13: pad 0 - code 0x2012 - size 32x32 - 4032x3024 TEST 14: pad 0 - code 0x200f - size 32x32 - 4032x3024 TEST 15: pad 0 - code 0x2010 - size 32x32 - 4032x3024 TEST 16: pad 1 - code 0x7001 - size / TEST 17: pad 2 - code 0x2008 - size 32x32 - 4032x3024 TEST 18: pad 2 - code 0x300f - size 32x32 - 4032x3024 TEST 19: pad 2 - code 0x3007 - size 32x32 - 4032x3024 TEST 20: pad 2 - code 0x300e - size 32x32 - 4032x3024 TEST 21: pad 2 - code 0x300a - size 32x32 - 4032x3024 TEST 22: pad 2 - code 0x3012 - size 32x32 - 4032x3024 TEST 23: pad 2 - code 0x3008 - size 32x32 - 4032x3024 TEST 24: pad 2 - code 0x3010 - size 32x32 - 4032x3024 TEST 25: pad 2 - code 0x3011 - size 32x32 - 4032x3024 TEST 26: pad 2 - code 0x3014 - size 32x32 - 4032x3024 TEST 27: pad 2 - code 0x3001 - size 32x32 - 4032x3024 TEST 28: pad 2 - code 0x3013 - size 32x32 - 4032x3024 TEST 29: pad 2 - code 0x3002 - size 32x32 - 4032x3024 TEST 30: pad 3 - code 0x7001 - size / TEST 31: pad 0 - code 0xdead - size / (test with an invalid media bus code) TEST 32: pad 6 - code 0x300f - size / (test with an invalid pad) TEST 33: pad 0 - code 0x2008 - size / (test with a format that is not supported by the pad) TEST 34: pad 2 - code 0x2010 - size / (test with a format that is not supported by the pad)And here is the output from
v4l2-compliance --device /dev/v4l-subdev0:
Media Driver Info:
Driver name : rkisp1
...
Name :rkisp1_isp...
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
...Sub-Device ioctls (Sink Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
...Sub-Device ioctls (Source Pad 2):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
...Sub-Device ioctls (Source Pad 3):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
...
...
As reported by Dafna Hirschfeld from v2 the errors on pad 1 & 3 are caused by a problem within v4l2-utils.--- .../platform/rockchip/rkisp1/rkisp1-isp.c | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c +33
-0@@ -600,6 +600,39 @@ static int rkisp1_isp_enum_mbus_code(struct v4l2_subdev *sd,return -EINVAL ; } +static int rkisp1_isp_enum_frame_size (struct v4l2_subdev *sd, +struct v4l2_subdev_pad_config *cfg, +struct v4l2_subdev_frame_size_enum *fse) +{ +const struct rkisp1_isp_mbus_info *mbus_info; + +if (fse->pad ==RKISP1_ISP_PAD_SINK_PARAMS || + fse->pad ==RKISP1_ISP_PAD_SOURCE_STATS ) +return -ENOTTY ; + +if (fse->index >0 ) +return -EINVAL ; + + mbus_info =rkisp1_isp_mbus_info_get (fse->code); +if (!mbus_info) +return -EINVAL ; + +if (!(mbus_info->direction &RKISP1_ISP_SD_SINK ) && + fse->pad ==RKISP1_ISP_PAD_SINK_VIDEO ) +return -EINVAL ; + +if (!(mbus_info->direction &RKISP1_ISP_SD_SRC ) && + fse->pad ==RKISP1_ISP_PAD_SOURCE_VIDEO ) +return -EINVAL ; + + fse->min_width =RKISP1_ISP_MIN_WIDTH ; + fse->max_width =RKISP1_ISP_MAX_WIDTH ; + fse->min_height =RKISP1_ISP_MIN_HEIGHT ; + fse->max_height =RKISP1_ISP_MAX_HEIGHT ; + +return 0 ; +} +static int rkisp1_isp_init_config (struct v4l2_subdev *sd,struct v4l2_subdev_pad_config *cfg) {
drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c static int rkisp1_subdev_link_validate(struct media_link *link) · line 919
Quoted 7 lines
drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c +1
-0@@ -880,6 +913,7 @@ static int rkisp1_subdev_link_validate(struct media_link *link)static const struct v4l2_subdev_pad_ops rkisp1_isp_pad_ops = { .enum_mbus_code = rkisp1_isp_enum_mbus_code, + .enum_frame_size = rkisp1_isp_enum_frame_size, .get_selection = rkisp1_isp_get_selection, .set_selection = rkisp1_isp_set_selection, .init_cfg = rkisp1_isp_init_config,
Quoted 5 lines · Sebastian Fricke
Implement the
VIDIOC_SUBDEV_ENUM_FRAME_SIZEioctl for the isp entity, check if the mbus code is valid for the given pad.
This call is not available for the parameter or metadata pads of the RkISP1.Signed-off-by Sebastian Fricke <[email protected]>
lgtm
Thanks
Helen
Quoted 160 lines
---
v1: https://patchwork.kernel.org/project/linux-media/patch/[email protected]/
v2: https://patchwork.kernel.org/project/linux-media/patch/[email protected]/Changes since v2:
- Change the return code for the parameter and metadata pads to-ENOTTYinstead of-EINVALas this reports that the pad doesn't support the ioctl
- Highlight more clearly that this patch is for the isp entity of the rkisp1, within the commit description as well as in the commit title
- Add the correct v4l2-complience output to the patch mailChanges since v1:
- Replace the custom bus code check with therkisp1_isp_mbus_info_getfunction
- Add a missing line break above the functionI have tested this patch with the following script:
http://paste.debian.net/1176614/The results on my NanoPC-T4 (Linux nanopct4 5.10.0-rc6-rockchip64):
pad 0 =
RKISP1_ISP_PAD_SINK_VIDEO
pad 1 =RKISP1_ISP_PAD_SINK_PARAMS
pad 2 =RKISP1_ISP_PAD_SOURCE_VIDEO
pad 3 =RKISP1_ISP_PAD_SOURCE_STATSbasti@nanopct4:~$ python3 rkisp1_enum_frame_size_test.py TEST 0: pad 0 - code 0x300f - size 32x32 - 4032x3024 TEST 1: pad 0 - code 0x3007 - size 32x32 - 4032x3024 TEST 2: pad 0 - code 0x300e - size 32x32 - 4032x3024 TEST 3: pad 0 - code 0x300a - size 32x32 - 4032x3024 TEST 4: pad 0 - code 0x3012 - size 32x32 - 4032x3024 TEST 5: pad 0 - code 0x3008 - size 32x32 - 4032x3024 TEST 6: pad 0 - code 0x3010 - size 32x32 - 4032x3024 TEST 7: pad 0 - code 0x3011 - size 32x32 - 4032x3024 TEST 8: pad 0 - code 0x3014 - size 32x32 - 4032x3024 TEST 9: pad 0 - code 0x3001 - size 32x32 - 4032x3024 TEST 10: pad 0 - code 0x3013 - size 32x32 - 4032x3024 TEST 11: pad 0 - code 0x3002 - size 32x32 - 4032x3024 TEST 12: pad 0 - code 0x2011 - size 32x32 - 4032x3024 TEST 13: pad 0 - code 0x2012 - size 32x32 - 4032x3024 TEST 14: pad 0 - code 0x200f - size 32x32 - 4032x3024 TEST 15: pad 0 - code 0x2010 - size 32x32 - 4032x3024 TEST 16: pad 1 - code 0x7001 - size / TEST 17: pad 2 - code 0x2008 - size 32x32 - 4032x3024 TEST 18: pad 2 - code 0x300f - size 32x32 - 4032x3024 TEST 19: pad 2 - code 0x3007 - size 32x32 - 4032x3024 TEST 20: pad 2 - code 0x300e - size 32x32 - 4032x3024 TEST 21: pad 2 - code 0x300a - size 32x32 - 4032x3024 TEST 22: pad 2 - code 0x3012 - size 32x32 - 4032x3024 TEST 23: pad 2 - code 0x3008 - size 32x32 - 4032x3024 TEST 24: pad 2 - code 0x3010 - size 32x32 - 4032x3024 TEST 25: pad 2 - code 0x3011 - size 32x32 - 4032x3024 TEST 26: pad 2 - code 0x3014 - size 32x32 - 4032x3024 TEST 27: pad 2 - code 0x3001 - size 32x32 - 4032x3024 TEST 28: pad 2 - code 0x3013 - size 32x32 - 4032x3024 TEST 29: pad 2 - code 0x3002 - size 32x32 - 4032x3024 TEST 30: pad 3 - code 0x7001 - size / TEST 31: pad 0 - code 0xdead - size / (test with an invalid media bus code) TEST 32: pad 6 - code 0x300f - size / (test with an invalid pad) TEST 33: pad 0 - code 0x2008 - size / (test with a format that is not supported by the pad) TEST 34: pad 2 - code 0x2010 - size / (test with a format that is not supported by the pad)And here is the output from
v4l2-compliance --device /dev/v4l-subdev0:
Media Driver Info:
Driver name : rkisp1
...
Name :rkisp1_isp...
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
...Sub-Device ioctls (Sink Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
...Sub-Device ioctls (Source Pad 2):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
...Sub-Device ioctls (Source Pad 3):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
fail: v4l2-test-subdevs.cpp(303): fmt.width == 0 || fmt.width > 65536
fail: v4l2-test-subdevs.cpp(348):checkMBusFrameFmt(node, fmt.format)
...
...
As reported by Dafna Hirschfeld from v2 the errors on pad 1 & 3 are caused by a problem within v4l2-utils.--- .../platform/rockchip/rkisp1/rkisp1-isp.c | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c +34
-0@@ -600,6 +600,39 @@ static int rkisp1_isp_enum_mbus_code(struct v4l2_subdev *sd,return -EINVAL ; } +static int rkisp1_isp_enum_frame_size (struct v4l2_subdev *sd, +struct v4l2_subdev_pad_config *cfg, +struct v4l2_subdev_frame_size_enum *fse) +{ +const struct rkisp1_isp_mbus_info *mbus_info; + +if (fse->pad ==RKISP1_ISP_PAD_SINK_PARAMS || + fse->pad ==RKISP1_ISP_PAD_SOURCE_STATS ) +return -ENOTTY ; + +if (fse->index >0 ) +return -EINVAL ; + + mbus_info =rkisp1_isp_mbus_info_get (fse->code); +if (!mbus_info) +return -EINVAL ; + +if (!(mbus_info->direction &RKISP1_ISP_SD_SINK ) && + fse->pad ==RKISP1_ISP_PAD_SINK_VIDEO ) +return -EINVAL ; + +if (!(mbus_info->direction &RKISP1_ISP_SD_SRC ) && + fse->pad ==RKISP1_ISP_PAD_SOURCE_VIDEO ) +return -EINVAL ; + + fse->min_width =RKISP1_ISP_MIN_WIDTH ; + fse->max_width =RKISP1_ISP_MAX_WIDTH ; + fse->min_height =RKISP1_ISP_MIN_HEIGHT ; + fse->max_height =RKISP1_ISP_MAX_HEIGHT ; + +return 0 ; +} +static int rkisp1_isp_init_config (struct v4l2_subdev *sd,struct v4l2_subdev_pad_config *cfg) {@@ -880,6 +913,7 @@ static int rkisp1_subdev_link_validate(struct media_link *link)static const struct v4l2_subdev_pad_ops rkisp1_isp_pad_ops = { .enum_mbus_code = rkisp1_isp_enum_mbus_code, + .enum_frame_size = rkisp1_isp_enum_frame_size, .get_selection = rkisp1_isp_get_selection, .set_selection = rkisp1_isp_set_selection, .init_cfg = rkisp1_isp_init_config,