package/libusb: needs gcc >= 4.9
Subsystems (4)
PATCH 1/1 package/libusb: needs gcc >= 4.9
libusb depends on gcc >= 4.9 because of _Thread_local since version 1.0.24 and
https://github.com/libusb/libusb/commit/9a1bc8cafb904c20a869c74ad6d657686a1c4bb1
Fixes:
- http://autobuild.buildroot.org/results/7b7f4b31095f8a7eecb347b574391003a2def8bc
Signed-off-by Fabrice Fontaine <[email protected]>
--- package/acsccid/Config.in | 7 +++--- package/apcupsd/Config.in | 6 +++-- package/avrdude/Config.in | 6 +++-- package/cc-tool/Config.in | 7 ++++-- package/ccid/Config.in | 6 +++-- package/dfu-util/Config.in | 6 +++-- package/dfu-util/Config.in.host | 4 ++++ package/dump1090/Config.in | 6 +++-- package/gr-osmosdr/Config.in | 4 ++++ package/hackrf/Config.in | 6 +++-- package/hidapi/Config.in | 7 ++++-- package/hplip/Config.in | 5 ++-- package/imx-usb-loader/Config.in | 6 +++-- package/imx-usb-loader/Config.in.host | 5 ++++ package/kodi/Config.in | 4 ++++ package/libftdi/Config.in | 6 +++-- package/libftdi1/Config.in | 6 +++-- package/libgphoto2/Config.in | 6 +++-- package/libhid/Config.in | 6 +++-- package/libiio/Config.in | 6 +++-- package/libiqrf/Config.in | 6 +++-- package/libnfc/Config.in | 6 +++-- package/libphidget/Config.in | 7 +++--- package/librtlsdr/Config.in | 6 +++-- package/libusb/Config.in | 6 +++-- package/mfgtools/Config.in.host | 5 ++++ package/mxsldr/Config.in.host | 5 ++++ package/omxplayer/Config.in | 6 +++-- package/openfpgaloader/Config.in | 7 ++++-- package/openjdk/Config.in | 7 ++++-- package/openocd/Config.in | 28 ++++++++++++++++++---- package/openocd/Config.in.host | 4 ++++ package/pcsc-lite/Config.in | 4 ++++ package/phidgetwebservice/Config.in | 7 +++--- package/python-libusb1/Config.in | 6 +++-- package/python-nfc/Config.in | 6 +++-- package/python-pylibftdi/Config.in | 6 +++-- package/python-pyusb/Config.in | 6 +++-- package/qemu/Config.in.host | 4 ++++ package/raspberrypi-usbboot/Config.in.host | 5 ++++ package/sispmctl/Config.in | 6 +++-- package/sunxi-tools/Config.in | 6 +++-- package/sunxi-tools/Config.in.host | 5 ++++ package/tegrarcm/Config.in.host | 5 ++++ package/uhd/Config.in | 12 ++++++++++ package/uhubctl/Config.in | 6 +++-- package/upower/Config.in | 6 +++-- package/usb_modeswitch/Config.in | 6 +++-- package/usb_modeswitch_data/Config.in | 6 +++-- package/usbredir/Config.in | 6 +++-- 50 files changed, 236 insertions(+), 80 deletions(-)
package/acsccid/Config.in +4 -3
@@ -1,6 +1,7 @@ config BR2_PACKAGE_ACSCCID bool "acsccid" depends on BR2_TOOLCHAIN_HAS_THREADS # pcsc-lite, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_MMU # pcsc-lite depends on !BR2_STATIC_LIBS # pcsc-lite select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
@@ -14,7 +15,7 @@ config BR2_PACKAGE_ACSCCID http://acsccid.sourceforge.net/ -comment "acsccid needs a toolchain w/ threads, dynamic library" +comment "acsccid needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_USE_MMU - depends on !BR2_TOOLCHAIN_HAS_THREADS || \ - BR2_STATIC_LIBS + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/apcupsd/Config.in +4 -2
@@ -28,14 +28,16 @@ config BR2_PACKAGE_APCUPSD_MODBUS config BR2_PACKAGE_APCUPSD_MODBUS_USB bool "modbus usb" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT select BR2_PACKAGE_APCUPSD_MODBUS help Compile MODBUS/USB driver code -comment "modbus usb support needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "modbus usb support needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_APCUPSD_NET bool "net"
package/avrdude/Config.in +4 -2
@@ -4,6 +4,7 @@ config BR2_PACKAGE_AVRDUDE depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_ELFUTILS select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT
@@ -14,6 +15,7 @@ config BR2_PACKAGE_AVRDUDE https://github.com/kcuzner/avrdude -comment "avrdude needs a uClibc or glibc toolchain w/ threads, wchar, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || BR2_STATIC_LIBS \ +comment "avrdude needs a uClibc or glibc toolchain w/ threads, wchar, dynamic library, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR \ + || BR2_STATIC_LIBS || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 \ || !(BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC)
package/cc-tool/Config.in +5 -2
@@ -3,6 +3,7 @@ config BR2_PACKAGE_CC_TOOL depends on BR2_INSTALL_LIBSTDCPP depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_USE_WCHAR # boost-filesystem + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS
@@ -16,5 +17,7 @@ config BR2_PACKAGE_CC_TOOL https://github.com/dashesy/cc-tool/ -comment "cc-tool needs a toolchain w/ C++, threads, wchar" - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR +comment "cc-tool needs a toolchain w/ C++, threads, wchar, gcc >= 4.9 " + depends on !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/ccid/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_CCID bool "ccid" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_MMU # pcsc-lite depends on !BR2_STATIC_LIBS # pcsc-lite select BR2_PACKAGE_PCSC_LITE
@@ -10,6 +11,7 @@ config BR2_PACKAGE_CCID https://ccid.apdu.fr/ -comment "ccid needs a toolchain w/ threads, dynamic library" +comment "ccid needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_USE_MMU - depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/dfu-util/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_DFU_UTIL bool "dfu-util" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Dfu-util is the host side implementation of the DFU 1.0
@@ -9,5 +10,6 @@ config BR2_PACKAGE_DFU_UTIL http://dfu-util.sourceforge.net/ -comment "dfu-util needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "dfu-util needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/dfu-util/Config.in.host +4 -0
@@ -1,8 +1,12 @@ config BR2_PACKAGE_HOST_DFU_UTIL bool "host dfu-util" + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help Dfu-util is the host side implementation of the DFU 1.0 specification of the USB forum. DFU is intended to download and upload firmware to devices connected over USB. http://dfu-util.sourceforge.net/ + +comment "host dfu-util needs a toolchain w/ host gcc >= 4.9" + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/dump1090/Config.in +4 -2
@@ -1,11 +1,13 @@ config BR2_PACKAGE_DUMP1090 bool "dump1090" depends on BR2_TOOLCHAIN_HAS_THREADS # librtlsdr + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # librtlsdr -> libusb select BR2_PACKAGE_LIBRTLSDR help Dump1090 is a simple Mode S decoder for RTLSDR devices https://github.com/MalcolmRobb/dump1090 -comment "dump1090 needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "dump1090 needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/gr-osmosdr/Config.in +4 -0
@@ -25,10 +25,14 @@ config BR2_PACKAGE_GR_OSMOSDR_IQFILE config BR2_PACKAGE_GR_OSMOSDR_RTLSDR bool "Osmocom RTLSDR support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # librtlsdr -> libusb select BR2_PACKAGE_LIBRTLSDR help Enable Osmocom RTLSDR support +comment "Osmocom RTLSDR support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_GR_OSMOSDR_RTLSDR_TCP bool "RTLSDR TCP Client support" help
package/hackrf/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_HACKRF bool "hackrf" depends on !BR2_STATIC_LIBS depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_FFTW select BR2_PACKAGE_FFTW_SINGLE select BR2_PACKAGE_LIBUSB
@@ -10,5 +11,6 @@ config BR2_PACKAGE_HACKRF https://github.com/mossmann/hackrf/tree/master/host -comment "hackrf needs a toolchain w/ threads, dynamic library" - depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS +comment "hackrf needs a toolchain w/ threads, dynamic library, gcc >= 4.9" + depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/hidapi/Config.in +5 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_HIDAPI bool "hidapi" depends on BR2_PACKAGE_HAS_UDEV depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBGUDEV select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
@@ -14,5 +15,7 @@ config BR2_PACKAGE_HIDAPI http://github.com/libusb/hidapi/ -comment "hidapi needs udev /dev management and a toolchain w/ NPTL threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || !BR2_PACKAGE_HAS_UDEV +comment "hidapi needs udev /dev management and a toolchain w/ NPTL, threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || \ + !BR2_PACKAGE_HAS_UDEV || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/hplip/Config.in +3 -2
@@ -3,6 +3,7 @@ config BR2_PACKAGE_HPLIP depends on BR2_INSTALL_LIBSTDCPP depends on BR2_PACKAGE_CUPS depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on !BR2_STATIC_LIBS # libdl select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_JPEG
@@ -17,7 +18,7 @@ config BR2_PACKAGE_HPLIP http://hplipopensource.com/ -comment "hplip needs a toolchain w/ C++, threads, dynamic library" +comment "hplip needs a toolchain w/ C++, threads, dynamic library, gcc >= 4.9" depends on BR2_PACKAGE_CUPS depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS || \ - BR2_STATIC_LIBS + BR2_STATIC_LIBS || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/imx-usb-loader/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_IMX_USB_LOADER bool "imx-usb-loader" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help This package contains tools to download and execute code
@@ -9,5 +10,6 @@ config BR2_PACKAGE_IMX_USB_LOADER https://github.com/boundarydevices/imx_usb_loader -comment "imx-usb-loader needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "imx-usb-loader needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/imx-usb-loader/Config.in.host +5 -0
@@ -1,9 +1,14 @@ config BR2_PACKAGE_HOST_IMX_USB_LOADER bool "host imx-usb-loader" depends on BR2_arm || BR2_aarch64 + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package contains tools to download and execute code on Freescale i.MX5x/6x/7x/8x and Vybrid SoCs through the Serial Download Protocol. https://github.com/boundarydevices/imx_usb_loader + +comment "host imx-usb-loader needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm || BR2_aarch64 + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/kodi/Config.in +4 -0
@@ -258,11 +258,15 @@ config BR2_PACKAGE_KODI_LIBUSB # https://github.com/xbmc/xbmc/blob/Jarvis/configure.ac#L1554 # "if libudev is available, we don't need libusb" depends on !BR2_PACKAGE_HAS_UDEV + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help Enable libusb support. +comment "usb support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_KODI_LIBVA bool "va" depends on \
package/libftdi/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBFTDI bool "libftdi" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help
@@ -23,5 +24,6 @@ comment "libftdi C++ bindings need a toolchain w/ wchar, C++" endif # BR2_PACKAGE_LIBFTDI -comment "libftdi needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libftdi needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/libftdi1/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBFTDI1 bool "libftdi1" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Userspace access to FTDI USB interface chips (version 1.x)
@@ -33,5 +34,6 @@ config BR2_PACKAGE_LIBFTDI1_FDTI_EEPROM endif # BR2_PACKAGE_LIBFTDI1 -comment "libftdi1 needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libftdi1 needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/libgphoto2/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBGPHOTO2 bool "libgphoto2" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBTOOL select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBXML2
@@ -10,5 +11,6 @@ config BR2_PACKAGE_LIBGPHOTO2 http://gphoto.org/proj/libgphoto2/ -comment "libgphoto needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libgphoto needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/libhid/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBHID bool "libhid" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help
@@ -8,5 +9,6 @@ config BR2_PACKAGE_LIBHID https://directory.fsf.org/wiki/Libhid -comment "libhid needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libhid needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/libiio/Config.in +4 -2
@@ -33,13 +33,15 @@ config BR2_PACKAGE_LIBIIO_USB_BACKEND bool "USB backend" default y depends on BR2_TOOLCHAIN_HAS_THREADS # from libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBIIO_XML_BACKEND select BR2_PACKAGE_LIBUSB help Enable the USB backend of the library. -comment "The USB backend needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "The USB backend needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_LIBIIO_SERIAL_BACKEND bool "Serial backend"
package/libiqrf/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBIQRF bool "libiqrf" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help This library implement specific protocol
@@ -10,5 +11,6 @@ config BR2_PACKAGE_LIBIQRF https://github.com/nandra/libiqrf -comment "libiqrf needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libiqrf needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/libnfc/Config.in +4 -2
@@ -24,13 +24,15 @@ comment "acr122_pcsc driver needs a toolchain w/ threads, dynamic library" config BR2_PACKAGE_LIBNFC_ACR122_USB bool "acr122_usb driver" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help support for acr122_usb driver -comment "acr122_usb driver needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "acr122_usb driver needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_LIBNFC_ACR122S bool "acr122s driver"
package/libphidget/Config.in +4 -3
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBPHIDGET bool "libphidget" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on !BR2_STATIC_LIBS select BR2_PACKAGE_LIBUSB help
@@ -23,6 +24,6 @@ config BR2_PACKAGE_LIBPHIDGET http://phidgets.com/ -comment "libphidget needs a toolchain w/ threads, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS - depends on BR2_STATIC_LIBS +comment "libphidget needs a toolchain w/ threads, dynamic library, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/librtlsdr/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBRTLSDR bool "librtlsdr" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Library and command line programs for accessing
@@ -28,5 +29,6 @@ config BR2_PACKAGE_LIBRTLSDR_ZEROCOPY endif -comment "librtlsdr needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "librtlsdr needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/libusb/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBUSB bool "libusb" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # _Thread_local help Userspace library for accessing USB devices
@@ -13,5 +14,6 @@ config BR2_PACKAGE_LIBUSB_EXAMPLES endif -comment "libusb needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libusb needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/mfgtools/Config.in.host +5 -0
@@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MFGTOOLS bool "host mfgtools" depends on BR2_arm + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package contains the Freescale manufacturing tool. It is designed to program firmware to i.MX boards during
@@ -8,3 +9,7 @@ config BR2_PACKAGE_HOST_MFGTOOLS Freescale UTP protocol. https://github.com/codeauroraforum/mfgtools + +comment "host mfgtools needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/mxsldr/Config.in.host +5 -0
@@ -1,9 +1,14 @@ config BR2_PACKAGE_HOST_MXSLDR bool "host mxsldr" depends on BR2_arm || BR2_armeb + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package contains tools to download and execute code on Freescale i.MX23 and i.MX28 SoC's through the Serial Download Protocol. https://gitlab.denx.de/denx/mxsldr + +comment "host mxsldr needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm || BR2_armeb + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/omxplayer/Config.in +4 -2
@@ -5,6 +5,7 @@ config BR2_PACKAGE_OMXPLAYER depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS # ffmpeg depends on BR2_INSTALL_LIBSTDCPP # boost depends on BR2_TOOLCHAIN_HAS_THREADS # alsa-lib, boost, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_WCHAR # boost depends on BR2_PACKAGE_RPI_USERLAND select BR2_PACKAGE_ALSA_LIB
@@ -25,10 +26,11 @@ config BR2_PACKAGE_OMXPLAYER https://github.com/popcornmix/omxplayer -comment "omxplayer needs rpi-userland and a toolchain w/ C++, threads, wchar, dynamic library" +comment "omxplayer needs rpi-userland and a toolchain w/ C++, threads, wchar, dynamic library, gcc >= 4.9" depends on BR2_arm depends on BR2_USE_MMU depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS depends on !BR2_PACKAGE_RPI_USERLAND depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS \ - || !BR2_USE_WCHAR || BR2_STATIC_LIBS + || !BR2_USE_WCHAR || BR2_STATIC_LIBS \ + || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/openfpgaloader/Config.in +5 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_OPENFPGALOADER bool "openfpgaloader" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi1 + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi1 -> libusb depends on BR2_INSTALL_LIBSTDCPP select BR2_PACKAGE_LIBFTDI1 help
@@ -8,5 +9,7 @@ config BR2_PACKAGE_OPENFPGALOADER https://github.com/trabucayre/openFPGALoader/ -comment "openfpgaloader needs a toolchain w/ threads, C++" - depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP +comment "openfpgaloader needs a toolchain w/ threads, C++, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/openjdk/Config.in +5 -2
@@ -20,6 +20,7 @@ config BR2_PACKAGE_OPENJDK depends on !BR2_STATIC_LIBS # glibc depends on BR2_INSTALL_LIBSTDCPP # cups depends on BR2_TOOLCHAIN_HAS_THREADS # alsa-lib, cups, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_TOOLCHAIN_USES_GLIBC depends on BR2_USE_MMU # cups depends on BR2_PACKAGE_XORG7
@@ -151,12 +152,14 @@ comment "openjdk needs X.Org" depends on BR2_USE_MMU depends on !BR2_PACKAGE_XORG7 -comment "openjdk needs glibc, and a toolchain w/ wchar, dynamic library, threads, C++" +comment "openjdk needs glibc, and a toolchain w/ wchar, dynamic library, threads, C++, gcc >= 4.9" depends on BR2_USE_MMU depends on BR2_PACKAGE_OPENJDK_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS depends on BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP || \ - !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_USES_GLIBC + !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_USES_GLIBC || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 comment "openjdk does not support soft float configurations" depends on BR2_PACKAGE_OPENJDK_ARCH_SUPPORTS
package/openocd/Config.in +23 -5
@@ -13,6 +13,7 @@ comment "Adapters" config BR2_PACKAGE_OPENOCD_CMSIS_DAP bool "CMSIS-DAP compliant debuggers" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_PACKAGE_HAS_UDEV # hidapi depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # hidapi select BR2_PACKAGE_LIBUSB
@@ -24,6 +25,7 @@ config BR2_PACKAGE_OPENOCD_CMSIS_DAP config BR2_PACKAGE_OPENOCD_FTDI bool "MPSSE mode of FTDI based devices" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the MPSSE mode of FTDI
@@ -32,6 +34,7 @@ config BR2_PACKAGE_OPENOCD_FTDI config BR2_PACKAGE_OPENOCD_STLINK bool "ST-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the ST-Link JTAG
@@ -40,6 +43,7 @@ config BR2_PACKAGE_OPENOCD_STLINK config BR2_PACKAGE_OPENOCD_TI_ICDI bool "TI ICDI JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the TI ICDI JTAG
@@ -48,6 +52,7 @@ config BR2_PACKAGE_OPENOCD_TI_ICDI config BR2_PACKAGE_OPENOCD_ULINK bool "Keil ULINK JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Keil ULINK JTAG
@@ -56,6 +61,7 @@ config BR2_PACKAGE_OPENOCD_ULINK config BR2_PACKAGE_OPENOCD_UBLASTER2 bool "Altera USB-Blaster II Compatible" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Altera USB-Blaster
@@ -64,6 +70,7 @@ config BR2_PACKAGE_OPENOCD_UBLASTER2 config BR2_PACKAGE_OPENOCD_JLINK bool "Segger J-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Segger J-Link JTAG Programmer and clone such as Atmel
@@ -72,6 +79,7 @@ config BR2_PACKAGE_OPENOCD_JLINK config BR2_PACKAGE_OPENOCD_OSDBM bool "OSDBM JTAG (only) Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the OSBDM (JTAG only)
@@ -80,6 +88,7 @@ config BR2_PACKAGE_OPENOCD_OSDBM config BR2_PACKAGE_OPENOCD_OPENDOUS bool "eStick/opendous JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the eStick/opendous JTAG
@@ -89,6 +98,7 @@ config BR2_PACKAGE_OPENOCD_AICE bool "Andes JTAG Programmer" depends on BR2_USE_MMU # use fork() depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Andes JTAG
@@ -97,6 +107,7 @@ config BR2_PACKAGE_OPENOCD_AICE config BR2_PACKAGE_OPENOCD_VSLLINK bool "Versaloon-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help
@@ -106,6 +117,7 @@ config BR2_PACKAGE_OPENOCD_VSLLINK config BR2_PACKAGE_OPENOCD_USBPROG bool "USBProg JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help
@@ -115,6 +127,7 @@ config BR2_PACKAGE_OPENOCD_USBPROG config BR2_PACKAGE_OPENOCD_RLINK bool "Raisonance RLink JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help
@@ -124,6 +137,7 @@ config BR2_PACKAGE_OPENOCD_RLINK config BR2_PACKAGE_OPENOCD_ARMEW bool "Olimex ARM-JTAG-EW Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help
@@ -143,6 +157,7 @@ config BR2_PACKAGE_OPENOCD_VPI config BR2_PACKAGE_OPENOCD_UBLASTER bool "Altera USB-Blaster" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 help Enable building support for the Altera USB-Blaster
@@ -183,6 +198,7 @@ config BR2_PACKAGE_OPENOCD_GW16012 config BR2_PACKAGE_OPENOCD_PRESTO bool "ASIX Presto Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 help Enable building support for ASIX Presto Programmer
@@ -191,6 +207,7 @@ config BR2_PACKAGE_OPENOCD_PRESTO config BR2_PACKAGE_OPENOCD_OPENJTAG bool "OpenJTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h
@@ -209,10 +226,11 @@ config BR2_PACKAGE_OPENOCD_SYSFS Enable building support for programming driven via sysfs gpios. -# Many adapters need libusb or libusb-compat, which require threads, -# but we don't want to duplicate this comment for all adapters that -# select libusb or libusb-compat. -comment "many openocd adapters needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +# Many adapters need libusb or libusb-compat, which require threads and +# gcc >= 4.9 but we don't want to duplicate this comment for all +# adapters that select libusb or libusb-compat. +comment "many openocd adapters needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 endif # BR2_PACKAGE_OPENOCD
package/openocd/Config.in.host +4 -0
@@ -1,6 +1,10 @@ config BR2_PACKAGE_HOST_OPENOCD bool "host openocd" + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help OpenOCD - Open On-Chip Debugger http://openocd.org/ + +comment "host openocd needs a toolchain w/ host gcc >= 4.9" + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/pcsc-lite/Config.in +4 -0
@@ -13,10 +13,14 @@ if BR2_PACKAGE_PCSC_LITE config BR2_PACKAGE_PCSC_LITE_FORCE_LIBUSB bool "use libusb" depends on !BR2_PACKAGE_HAS_UDEV + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Select Y if you want to support usb smart card readers. +comment "libusb support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_PCSC_LITE_DEBUGATR bool "enable ATR debug messages" help
package/phidgetwebservice/Config.in +4 -3
@@ -1,6 +1,7 @@ config BR2_PACKAGE_PHIDGETWEBSERVICE bool "phidgetwebservice" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb, libphidget + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libphidget -> libusb depends on !BR2_STATIC_LIBS # libphidget select BR2_PACKAGE_LIBPHIDGET help
@@ -17,6 +18,6 @@ config BR2_PACKAGE_PHIDGETWEBSERVICE http://phidgets.com/ -comment "phidgetwebservice needs a toolchain w/ threads, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS - depends on BR2_STATIC_LIBS +comment "phidgetwebservice needs a toolchain w/ threads, dynamic library, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/python-libusb1/Config.in +4 -2
@@ -1,11 +1,13 @@ config BR2_PACKAGE_PYTHON_LIBUSB1 bool "python-libusb1" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Pure-python wrapper for libusb-1.0. http://github.com/vpelletier/python-libusb1 -comment "python-libusb1 needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "python-libusb1 needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/python-nfc/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_PYTHON_NFC bool "python-nfc" depends on BR2_PACKAGE_PYTHON depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help
@@ -9,6 +10,7 @@ config BR2_PACKAGE_PYTHON_NFC https://launchpad.net/nfcpy -comment "python-nfc needs a toolchain w/ threads" +comment "python-nfc needs a toolchain w/ threads, gcc >= 4.9" depends on BR2_PACKAGE_PYTHON - depends on !BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/python-pylibftdi/Config.in +4 -2
@@ -1,11 +1,13 @@ config BR2_PACKAGE_PYTHON_PYLIBFTDI bool "python-pylibftdi" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI help This package contains the python language binding libftdi. https://pypi.python.org/pypi/pylibftdi -comment "python-pylibftdi needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "python-pylibftdi needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/python-pyusb/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_PYTHON_PYUSB bool "python-pyusb" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help The PyUSB module provides easy access to the Universal
@@ -8,5 +9,6 @@ config BR2_PACKAGE_PYTHON_PYUSB http://sourceforge.net/apps/trac/pyusb/ -comment "python-pyusb needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "python-pyusb needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/qemu/Config.in.host +4 -0
@@ -88,7 +88,11 @@ config BR2_PACKAGE_HOST_QEMU_VIRTFS config BR2_PACKAGE_HOST_QEMU_USB bool "USB passthrough support" + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help Enables USB passthrough support from guest to host. +comment "USB passthrough support needs a toolchain w/ host gcc >= 4.9" + depends on !BR2_HOST_GCC_AT_LEAST_4_9 + endif
package/raspberrypi-usbboot/Config.in.host +5 -0
@@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_RASPBERRYPI_USBBOOT bool "host raspberrypi-usbboot" depends on BR2_arm + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package builds and install the "rpiboot" tool for the host machine. This tool allows to boot the Broadcom BCM
@@ -10,3 +11,7 @@ config BR2_PACKAGE_HOST_RASPBERRYPI_USBBOOT built into the Compute module). https://github.com/raspberrypi/usbboot + +comment "host raspberrypi-usbboot needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/sispmctl/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_SISPMCTL bool "sispmctl" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_WCHAR depends on BR2_USE_MMU # fork() select BR2_PACKAGE_LIBUSB
@@ -13,6 +14,7 @@ config BR2_PACKAGE_SISPMCTL http://sispmctl.sourceforge.net/ -comment "sispmctl needs a toolchain w/ threads, wchar" - depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR +comment "sispmctl needs a toolchain w/ threads, wchar, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 depends on BR2_USE_MMU
package/sunxi-tools/Config.in +4 -2
@@ -24,14 +24,16 @@ config BR2_PACKAGE_SUNXI_TOOLS_BOOTINFO config BR2_PACKAGE_SUNXI_TOOLS_FEL bool "sunxi-fel" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help The sunxi-fel command can interact with a sunxi device in fel mode. This allows do download code to memory and execute it. -comment "sunxi-fel needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "sunxi-fel needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_SUNXI_TOOLS_NAND_PART bool "sunxi-nand-part"
package/sunxi-tools/Config.in.host +5 -0
@@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_SUNXI_TOOLS bool "host sunxi-tools" depends on BR2_arm + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help Tools for Allwinner A10 (aka sun4i) and A13 (aka sun5i) based devices. This includes fex2bin which can be used to
@@ -10,3 +11,7 @@ config BR2_PACKAGE_HOST_SUNXI_TOOLS mainline Linux kernel version. http://linux-sunxi.org/Sunxi-tools + +comment "host sunxi-tools needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/tegrarcm/Config.in.host +5 -0
@@ -1,8 +1,13 @@ config BR2_PACKAGE_HOST_TEGRARCM bool "host tegrarcm" depends on BR2_arm || BR2_armeb + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This program is used to send code to a Tegra device in recovery mode. https://github.com/NVIDIA/tegrarcm + +comment "host tegrarcm needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm || BR2_armeb + depends on !BR2_HOST_GCC_AT_LEAST_4_9
package/uhd/Config.in +12 -0
@@ -33,16 +33,24 @@ if BR2_PACKAGE_UHD config BR2_PACKAGE_UHD_B100 bool "b100 support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_UHD_USB help enable B100 support +comment "B100 support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_UHD_B200 bool "b200 support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_UHD_USB help enable B200 support +comment "B200 support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_UHD_E300 bool "E300 support" select BR2_PACKAGE_UHD_MPMD
@@ -72,8 +80,12 @@ config BR2_PACKAGE_UHD_RFNOC config BR2_PACKAGE_UHD_USB bool "USB support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help enable UHD USB support +comment "USB support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + endif
package/uhubctl/Config.in +4 -2
@@ -1,11 +1,13 @@ config BR2_PACKAGE_UHUBCTL bool "uhubctl" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Control USB power per-port on smart USB hubs. https://github.com/mvp/uhubctl -comment "uhubctl needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "uhubctl needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/upower/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_UPOWER bool "upower" depends on BR2_PACKAGE_HAS_UDEV depends on BR2_TOOLCHAIN_HAS_THREADS # libgudev, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_MMU # libgudev depends on BR2_USE_WCHAR # libgudev select BR2_PACKAGE_LIBGUDEV
@@ -22,6 +23,7 @@ comment "upower needs udev /dev management" depends on BR2_USE_MMU depends on !BR2_PACKAGE_HAS_UDEV -comment "upower needs a toolchain w/ threads, wchar" +comment "upower needs a toolchain w/ threads, wchar, gcc >= 4.9" depends on BR2_USE_MMU - depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/usb_modeswitch/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_USB_MODESWITCH bool "usb_modeswitch" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_JIMTCL if !BR2_PACKAGE_TCL || BR2_PACKAGE_TCL_SHLIB_ONLY select BR2_PACKAGE_LIBUSB help
@@ -20,5 +21,6 @@ config BR2_PACKAGE_USB_MODESWITCH http://www.draisberghof.de/usb_modeswitch/ -comment "usb_modeswitch needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "usb_modeswitch needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/usb_modeswitch_data/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_USB_MODESWITCH_DATA bool "usb_modeswitch_data" depends on BR2_TOOLCHAIN_HAS_THREADS # usb_modeswitch -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # usb_modeswitch -> libusb select BR2_PACKAGE_USB_MODESWITCH help USB mode switch data
@@ -9,5 +10,6 @@ config BR2_PACKAGE_USB_MODESWITCH_DATA http://www.draisberghof.de/usb_modeswitch/ -comment "usb_modeswitch_data needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "usb_modeswitch_data needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
package/usbredir/Config.in +4 -2
@@ -1,9 +1,11 @@ -comment "usbredir needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "usbredir needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_USBREDIR bool "usbredir" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help usbredir is the name of a network protocol for sending usb
Signature · 1 line
2.29.2
Yann E. MORIN
AppliedPATCH 1/1 package/libusb: needs gcc >= 4.9
Fabrice, All,
On 2020-12-13 16:56 +0100, Fabrice Fontaine spake thusly:
Quoted 8 lines
libusb depends on gcc >= 4.9 because of
_Thread_localsince version 1.0.24 and
https://github.com/libusb/libusb/commit/9a1bc8cafb904c20a869c74ad6d657686a1c4bb1Fixes:
- http://autobuild.buildroot.org/results/7b7f4b31095f8a7eecb347b574391003a2def8bcSigned-off-by Fabrice Fontaine <[email protected]>
Applied to master, thanks.
Regards,
Yann E. MORIN.
Quoted 1,258 lines
--- package/acsccid/Config.in | 7 +++--- package/apcupsd/Config.in | 6 +++-- package/avrdude/Config.in | 6 +++-- package/cc-tool/Config.in | 7 ++++-- package/ccid/Config.in | 6 +++-- package/dfu-util/Config.in | 6 +++-- package/dfu-util/Config.in.host | 4 ++++ package/dump1090/Config.in | 6 +++-- package/gr-osmosdr/Config.in | 4 ++++ package/hackrf/Config.in | 6 +++-- package/hidapi/Config.in | 7 ++++-- package/hplip/Config.in | 5 ++-- package/imx-usb-loader/Config.in | 6 +++-- package/imx-usb-loader/Config.in.host | 5 ++++ package/kodi/Config.in | 4 ++++ package/libftdi/Config.in | 6 +++-- package/libftdi1/Config.in | 6 +++-- package/libgphoto2/Config.in | 6 +++-- package/libhid/Config.in | 6 +++-- package/libiio/Config.in | 6 +++-- package/libiqrf/Config.in | 6 +++-- package/libnfc/Config.in | 6 +++-- package/libphidget/Config.in | 7 +++--- package/librtlsdr/Config.in | 6 +++-- package/libusb/Config.in | 6 +++-- package/mfgtools/Config.in.host | 5 ++++ package/mxsldr/Config.in.host | 5 ++++ package/omxplayer/Config.in | 6 +++-- package/openfpgaloader/Config.in | 7 ++++-- package/openjdk/Config.in | 7 ++++-- package/openocd/Config.in | 28 ++++++++++++++++++---- package/openocd/Config.in.host | 4 ++++ package/pcsc-lite/Config.in | 4 ++++ package/phidgetwebservice/Config.in | 7 +++--- package/python-libusb1/Config.in | 6 +++-- package/python-nfc/Config.in | 6 +++-- package/python-pylibftdi/Config.in | 6 +++-- package/python-pyusb/Config.in | 6 +++-- package/qemu/Config.in.host | 4 ++++ package/raspberrypi-usbboot/Config.in.host | 5 ++++ package/sispmctl/Config.in | 6 +++-- package/sunxi-tools/Config.in | 6 +++-- package/sunxi-tools/Config.in.host | 5 ++++ package/tegrarcm/Config.in.host | 5 ++++ package/uhd/Config.in | 12 ++++++++++ package/uhubctl/Config.in | 6 +++-- package/upower/Config.in | 6 +++-- package/usb_modeswitch/Config.in | 6 +++-- package/usb_modeswitch_data/Config.in | 6 +++-- package/usbredir/Config.in | 6 +++-- 50 files changed, 236 insertions(+), 80 deletions(-)package/acsccid/Config.in +4
-3@@ -1,6 +1,7 @@ config BR2_PACKAGE_ACSCCID bool "acsccid" depends on BR2_TOOLCHAIN_HAS_THREADS # pcsc-lite, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_MMU # pcsc-lite depends on !BR2_STATIC_LIBS # pcsc-lite select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE@@ -14,7 +15,7 @@ config BR2_PACKAGE_ACSCCID http://acsccid.sourceforge.net/ -comment "acsccid needs a toolchain w/ threads, dynamic library" +comment "acsccid needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_USE_MMU - depends on !BR2_TOOLCHAIN_HAS_THREADS || \ - BR2_STATIC_LIBS + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/apcupsd/Config.in +4
-2@@ -28,14 +28,16 @@ config BR2_PACKAGE_APCUPSD_MODBUS config BR2_PACKAGE_APCUPSD_MODBUS_USB bool "modbus usb" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT select BR2_PACKAGE_APCUPSD_MODBUS help Compile MODBUS/USB driver code -comment "modbus usb support needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "modbus usb support needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_APCUPSD_NET bool "net"package/avrdude/Config.in +4
-2@@ -4,6 +4,7 @@ config BR2_PACKAGE_AVRDUDE depends on BR2_USE_WCHAR # elfutils depends on !BR2_STATIC_LIBS # elfutils depends on BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC # elfutils + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_ELFUTILS select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT@@ -14,6 +15,7 @@ config BR2_PACKAGE_AVRDUDE https://github.com/kcuzner/avrdude -comment "avrdude needs a uClibc or glibc toolchain w/ threads, wchar, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || BR2_STATIC_LIBS \ +comment "avrdude needs a uClibc or glibc toolchain w/ threads, wchar, dynamic library, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR \ + || BR2_STATIC_LIBS || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 \ || !(BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_GLIBC)package/cc-tool/Config.in +5
-2@@ -3,6 +3,7 @@ config BR2_PACKAGE_CC_TOOL depends on BR2_INSTALL_LIBSTDCPP depends on BR2_TOOLCHAIN_HAS_THREADS depends on BR2_USE_WCHAR # boost-filesystem + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_BOOST select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS@@ -16,5 +17,7 @@ config BR2_PACKAGE_CC_TOOL https://github.com/dashesy/cc-tool/ -comment "cc-tool needs a toolchain w/ C++, threads, wchar" - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR +comment "cc-tool needs a toolchain w/ C++, threads, wchar, gcc >= 4.9 " + depends on !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/ccid/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_CCID bool "ccid" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_MMU # pcsc-lite depends on !BR2_STATIC_LIBS # pcsc-lite select BR2_PACKAGE_PCSC_LITE@@ -10,6 +11,7 @@ config BR2_PACKAGE_CCID https://ccid.apdu.fr/ -comment "ccid needs a toolchain w/ threads, dynamic library" +comment "ccid needs a toolchain w/ threads, dynamic library, gcc >= 4.9" depends on BR2_USE_MMU - depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/dfu-util/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_DFU_UTIL bool "dfu-util" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Dfu-util is the host side implementation of the DFU 1.0@@ -9,5 +10,6 @@ config BR2_PACKAGE_DFU_UTIL http://dfu-util.sourceforge.net/ -comment "dfu-util needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "dfu-util needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/dfu-util/Config.in.host +4
-0@@ -1,8 +1,12 @@ config BR2_PACKAGE_HOST_DFU_UTIL bool "host dfu-util" + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help Dfu-util is the host side implementation of the DFU 1.0 specification of the USB forum. DFU is intended to download and upload firmware to devices connected over USB. http://dfu-util.sourceforge.net/ + +comment "host dfu-util needs a toolchain w/ host gcc >= 4.9" + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/dump1090/Config.in +4
-2@@ -1,11 +1,13 @@ config BR2_PACKAGE_DUMP1090 bool "dump1090" depends on BR2_TOOLCHAIN_HAS_THREADS # librtlsdr + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # librtlsdr -> libusb select BR2_PACKAGE_LIBRTLSDR help Dump1090 is a simple Mode S decoder for RTLSDR devices https://github.com/MalcolmRobb/dump1090 -comment "dump1090 needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "dump1090 needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/gr-osmosdr/Config.in +4
-0@@ -25,10 +25,14 @@ config BR2_PACKAGE_GR_OSMOSDR_IQFILE config BR2_PACKAGE_GR_OSMOSDR_RTLSDR bool "Osmocom RTLSDR support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # librtlsdr -> libusb select BR2_PACKAGE_LIBRTLSDR help Enable Osmocom RTLSDR support +comment "Osmocom RTLSDR support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_GR_OSMOSDR_RTLSDR_TCP bool "RTLSDR TCP Client support" helppackage/hackrf/Config.in +4
-2@@ -2,6 +2,7 @@ config BR2_PACKAGE_HACKRF bool "hackrf" depends on !BR2_STATIC_LIBS depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_FFTW select BR2_PACKAGE_FFTW_SINGLE select BR2_PACKAGE_LIBUSB@@ -10,5 +11,6 @@ config BR2_PACKAGE_HACKRF https://github.com/mossmann/hackrf/tree/master/host -comment "hackrf needs a toolchain w/ threads, dynamic library" - depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS +comment "hackrf needs a toolchain w/ threads, dynamic library, gcc >= 4.9" + depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/hidapi/Config.in +5
-2@@ -2,6 +2,7 @@ config BR2_PACKAGE_HIDAPI bool "hidapi" depends on BR2_PACKAGE_HAS_UDEV depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBGUDEV select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE@@ -14,5 +15,7 @@ config BR2_PACKAGE_HIDAPI http://github.com/libusb/hidapi/ -comment "hidapi needs udev /dev management and a toolchain w/ NPTL threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || !BR2_PACKAGE_HAS_UDEV +comment "hidapi needs udev /dev management and a toolchain w/ NPTL, threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS_NPTL || \ + !BR2_PACKAGE_HAS_UDEV || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/hplip/Config.in +3
-2@@ -3,6 +3,7 @@ config BR2_PACKAGE_HPLIP depends on BR2_INSTALL_LIBSTDCPP depends on BR2_PACKAGE_CUPS depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on !BR2_STATIC_LIBS # libdl select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_JPEG@@ -17,7 +18,7 @@ config BR2_PACKAGE_HPLIP http://hplipopensource.com/ -comment "hplip needs a toolchain w/ C++, threads, dynamic library" +comment "hplip needs a toolchain w/ C++, threads, dynamic library, gcc >= 4.9" depends on BR2_PACKAGE_CUPS depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS || \ - BR2_STATIC_LIBS + BR2_STATIC_LIBS || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/imx-usb-loader/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_IMX_USB_LOADER bool "imx-usb-loader" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help This package contains tools to download and execute code@@ -9,5 +10,6 @@ config BR2_PACKAGE_IMX_USB_LOADER https://github.com/boundarydevices/imx_usb_loader -comment "imx-usb-loader needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "imx-usb-loader needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/imx-usb-loader/Config.in.host +5
-0@@ -1,9 +1,14 @@ config BR2_PACKAGE_HOST_IMX_USB_LOADER bool "host imx-usb-loader" depends on BR2_arm || BR2_aarch64 + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package contains tools to download and execute code on Freescale i.MX5x/6x/7x/8x and Vybrid SoCs through the Serial Download Protocol. https://github.com/boundarydevices/imx_usb_loader + +comment "host imx-usb-loader needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm || BR2_aarch64 + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/kodi/Config.in +4
-0@@ -258,11 +258,15 @@ config BR2_PACKAGE_KODI_LIBUSB # https://github.com/xbmc/xbmc/blob/Jarvis/configure.ac#L1554 # "if libudev is available, we don't need libusb" depends on !BR2_PACKAGE_HAS_UDEV + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help Enable libusb support. +comment "usb support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_KODI_LIBVA bool "va" depends on \package/libftdi/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBFTDI bool "libftdi" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help@@ -23,5 +24,6 @@ comment "libftdi C++ bindings need a toolchain w/ wchar, C++" endif # BR2_PACKAGE_LIBFTDI -comment "libftdi needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libftdi needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/libftdi1/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBFTDI1 bool "libftdi1" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Userspace access to FTDI USB interface chips (version 1.x)@@ -33,5 +34,6 @@ config BR2_PACKAGE_LIBFTDI1_FDTI_EEPROM endif # BR2_PACKAGE_LIBFTDI1 -comment "libftdi1 needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libftdi1 needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/libgphoto2/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBGPHOTO2 bool "libgphoto2" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBTOOL select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBXML2@@ -10,5 +11,6 @@ config BR2_PACKAGE_LIBGPHOTO2 http://gphoto.org/proj/libgphoto2/ -comment "libgphoto needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libgphoto needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/libhid/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBHID bool "libhid" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help@@ -8,5 +9,6 @@ config BR2_PACKAGE_LIBHID https://directory.fsf.org/wiki/Libhid -comment "libhid needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libhid needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/libiio/Config.in +4
-2@@ -33,13 +33,15 @@ config BR2_PACKAGE_LIBIIO_USB_BACKEND bool "USB backend" default y depends on BR2_TOOLCHAIN_HAS_THREADS # from libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBIIO_XML_BACKEND select BR2_PACKAGE_LIBUSB help Enable the USB backend of the library. -comment "The USB backend needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "The USB backend needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_LIBIIO_SERIAL_BACKEND bool "Serial backend"package/libiqrf/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBIQRF bool "libiqrf" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help This library implement specific protocol@@ -10,5 +11,6 @@ config BR2_PACKAGE_LIBIQRF https://github.com/nandra/libiqrf -comment "libiqrf needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libiqrf needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/libnfc/Config.in +4
-2@@ -24,13 +24,15 @@ comment "acr122_pcsc driver needs a toolchain w/ threads, dynamic library" config BR2_PACKAGE_LIBNFC_ACR122_USB bool "acr122_usb driver" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help support for acr122_usb driver -comment "acr122_usb driver needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "acr122_usb driver needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_LIBNFC_ACR122S bool "acr122s driver"package/libphidget/Config.in +4
-3@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBPHIDGET bool "libphidget" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on !BR2_STATIC_LIBS select BR2_PACKAGE_LIBUSB help@@ -23,6 +24,6 @@ config BR2_PACKAGE_LIBPHIDGET http://phidgets.com/ -comment "libphidget needs a toolchain w/ threads, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS - depends on BR2_STATIC_LIBS +comment "libphidget needs a toolchain w/ threads, dynamic library, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/librtlsdr/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBRTLSDR bool "librtlsdr" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Library and command line programs for accessing@@ -28,5 +29,6 @@ config BR2_PACKAGE_LIBRTLSDR_ZEROCOPY endif -comment "librtlsdr needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "librtlsdr needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/libusb/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBUSB bool "libusb" depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # _Thread_local help Userspace library for accessing USB devices@@ -13,5 +14,6 @@ config BR2_PACKAGE_LIBUSB_EXAMPLES endif -comment "libusb needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "libusb needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/mfgtools/Config.in.host +5
-0@@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_MFGTOOLS bool "host mfgtools" depends on BR2_arm + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package contains the Freescale manufacturing tool. It is designed to program firmware to i.MX boards during@@ -8,3 +9,7 @@ config BR2_PACKAGE_HOST_MFGTOOLS Freescale UTP protocol. https://github.com/codeauroraforum/mfgtools + +comment "host mfgtools needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/mxsldr/Config.in.host +5
-0@@ -1,9 +1,14 @@ config BR2_PACKAGE_HOST_MXSLDR bool "host mxsldr" depends on BR2_arm || BR2_armeb + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package contains tools to download and execute code on Freescale i.MX23 and i.MX28 SoC's through the Serial Download Protocol. https://gitlab.denx.de/denx/mxsldr + +comment "host mxsldr needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm || BR2_armeb + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/omxplayer/Config.in +4
-2@@ -5,6 +5,7 @@ config BR2_PACKAGE_OMXPLAYER depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS # ffmpeg depends on BR2_INSTALL_LIBSTDCPP # boost depends on BR2_TOOLCHAIN_HAS_THREADS # alsa-lib, boost, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_WCHAR # boost depends on BR2_PACKAGE_RPI_USERLAND select BR2_PACKAGE_ALSA_LIB@@ -25,10 +26,11 @@ config BR2_PACKAGE_OMXPLAYER https://github.com/popcornmix/omxplayer -comment "omxplayer needs rpi-userland and a toolchain w/ C++, threads, wchar, dynamic library" +comment "omxplayer needs rpi-userland and a toolchain w/ C++, threads, wchar, dynamic library, gcc >= 4.9" depends on BR2_arm depends on BR2_USE_MMU depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS depends on !BR2_PACKAGE_RPI_USERLAND depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS \ - || !BR2_USE_WCHAR || BR2_STATIC_LIBS + || !BR2_USE_WCHAR || BR2_STATIC_LIBS \ + || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/openfpgaloader/Config.in +5
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_OPENFPGALOADER bool "openfpgaloader" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi1 + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi1 -> libusb depends on BR2_INSTALL_LIBSTDCPP select BR2_PACKAGE_LIBFTDI1 help@@ -8,5 +9,7 @@ config BR2_PACKAGE_OPENFPGALOADER https://github.com/trabucayre/openFPGALoader/ -comment "openfpgaloader needs a toolchain w/ threads, C++" - depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP +comment "openfpgaloader needs a toolchain w/ threads, C++, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/openjdk/Config.in +5
-2@@ -20,6 +20,7 @@ config BR2_PACKAGE_OPENJDK depends on !BR2_STATIC_LIBS # glibc depends on BR2_INSTALL_LIBSTDCPP # cups depends on BR2_TOOLCHAIN_HAS_THREADS # alsa-lib, cups, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_TOOLCHAIN_USES_GLIBC depends on BR2_USE_MMU # cups depends on BR2_PACKAGE_XORG7@@ -151,12 +152,14 @@ comment "openjdk needs X.Org" depends on BR2_USE_MMU depends on !BR2_PACKAGE_XORG7 -comment "openjdk needs glibc, and a toolchain w/ wchar, dynamic library, threads, C++" +comment "openjdk needs glibc, and a toolchain w/ wchar, dynamic library, threads, C++, gcc >= 4.9" depends on BR2_USE_MMU depends on BR2_PACKAGE_OPENJDK_ARCH_SUPPORTS depends on BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS depends on BR2_STATIC_LIBS || !BR2_INSTALL_LIBSTDCPP || \ - !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_USES_GLIBC + !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_USES_GLIBC || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 comment "openjdk does not support soft float configurations" depends on BR2_PACKAGE_OPENJDK_ARCH_SUPPORTSpackage/openocd/Config.in +23
-5@@ -13,6 +13,7 @@ comment "Adapters" config BR2_PACKAGE_OPENOCD_CMSIS_DAP bool "CMSIS-DAP compliant debuggers" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_PACKAGE_HAS_UDEV # hidapi depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # hidapi select BR2_PACKAGE_LIBUSB@@ -24,6 +25,7 @@ config BR2_PACKAGE_OPENOCD_CMSIS_DAP config BR2_PACKAGE_OPENOCD_FTDI bool "MPSSE mode of FTDI based devices" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the MPSSE mode of FTDI@@ -32,6 +34,7 @@ config BR2_PACKAGE_OPENOCD_FTDI config BR2_PACKAGE_OPENOCD_STLINK bool "ST-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the ST-Link JTAG@@ -40,6 +43,7 @@ config BR2_PACKAGE_OPENOCD_STLINK config BR2_PACKAGE_OPENOCD_TI_ICDI bool "TI ICDI JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the TI ICDI JTAG@@ -48,6 +52,7 @@ config BR2_PACKAGE_OPENOCD_TI_ICDI config BR2_PACKAGE_OPENOCD_ULINK bool "Keil ULINK JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Keil ULINK JTAG@@ -56,6 +61,7 @@ config BR2_PACKAGE_OPENOCD_ULINK config BR2_PACKAGE_OPENOCD_UBLASTER2 bool "Altera USB-Blaster II Compatible" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Altera USB-Blaster@@ -64,6 +70,7 @@ config BR2_PACKAGE_OPENOCD_UBLASTER2 config BR2_PACKAGE_OPENOCD_JLINK bool "Segger J-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Segger J-Link JTAG Programmer and clone such as Atmel@@ -72,6 +79,7 @@ config BR2_PACKAGE_OPENOCD_JLINK config BR2_PACKAGE_OPENOCD_OSDBM bool "OSDBM JTAG (only) Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the OSBDM (JTAG only)@@ -80,6 +88,7 @@ config BR2_PACKAGE_OPENOCD_OSDBM config BR2_PACKAGE_OPENOCD_OPENDOUS bool "eStick/opendous JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the eStick/opendous JTAG@@ -89,6 +98,7 @@ config BR2_PACKAGE_OPENOCD_AICE bool "Andes JTAG Programmer" depends on BR2_USE_MMU # use fork() depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Enable building support for the Andes JTAG@@ -97,6 +107,7 @@ config BR2_PACKAGE_OPENOCD_AICE config BR2_PACKAGE_OPENOCD_VSLLINK bool "Versaloon-Link JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help@@ -106,6 +117,7 @@ config BR2_PACKAGE_OPENOCD_VSLLINK config BR2_PACKAGE_OPENOCD_USBPROG bool "USBProg JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help@@ -115,6 +127,7 @@ config BR2_PACKAGE_OPENOCD_USBPROG config BR2_PACKAGE_OPENOCD_RLINK bool "Raisonance RLink JTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help@@ -124,6 +137,7 @@ config BR2_PACKAGE_OPENOCD_RLINK config BR2_PACKAGE_OPENOCD_ARMEW bool "Olimex ARM-JTAG-EW Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help@@ -143,6 +157,7 @@ config BR2_PACKAGE_OPENOCD_VPI config BR2_PACKAGE_OPENOCD_UBLASTER bool "Altera USB-Blaster" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 help Enable building support for the Altera USB-Blaster@@ -183,6 +198,7 @@ config BR2_PACKAGE_OPENOCD_GW16012 config BR2_PACKAGE_OPENOCD_PRESTO bool "ASIX Presto Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 help Enable building support for ASIX Presto Programmer@@ -191,6 +207,7 @@ config BR2_PACKAGE_OPENOCD_PRESTO config BR2_PACKAGE_OPENOCD_OPENJTAG bool "OpenJTAG Programmer" depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI1 select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h@@ -209,10 +226,11 @@ config BR2_PACKAGE_OPENOCD_SYSFS Enable building support for programming driven via sysfs gpios. -# Many adapters need libusb or libusb-compat, which require threads, -# but we don't want to duplicate this comment for all adapters that -# select libusb or libusb-compat. -comment "many openocd adapters needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +# Many adapters need libusb or libusb-compat, which require threads and +# gcc >= 4.9 but we don't want to duplicate this comment for all +# adapters that select libusb or libusb-compat. +comment "many openocd adapters needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 endif # BR2_PACKAGE_OPENOCDpackage/openocd/Config.in.host +4
-0@@ -1,6 +1,10 @@ config BR2_PACKAGE_HOST_OPENOCD bool "host openocd" + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help OpenOCD - Open On-Chip Debugger http://openocd.org/ + +comment "host openocd needs a toolchain w/ host gcc >= 4.9" + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/pcsc-lite/Config.in +4
-0@@ -13,10 +13,14 @@ if BR2_PACKAGE_PCSC_LITE config BR2_PACKAGE_PCSC_LITE_FORCE_LIBUSB bool "use libusb" depends on !BR2_PACKAGE_HAS_UDEV + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Select Y if you want to support usb smart card readers. +comment "libusb support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_PCSC_LITE_DEBUGATR bool "enable ATR debug messages" helppackage/phidgetwebservice/Config.in +4
-3@@ -1,6 +1,7 @@ config BR2_PACKAGE_PHIDGETWEBSERVICE bool "phidgetwebservice" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb, libphidget + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libphidget -> libusb depends on !BR2_STATIC_LIBS # libphidget select BR2_PACKAGE_LIBPHIDGET help@@ -17,6 +18,6 @@ config BR2_PACKAGE_PHIDGETWEBSERVICE http://phidgets.com/ -comment "phidgetwebservice needs a toolchain w/ threads, dynamic library" - depends on !BR2_TOOLCHAIN_HAS_THREADS - depends on BR2_STATIC_LIBS +comment "phidgetwebservice needs a toolchain w/ threads, dynamic library, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/python-libusb1/Config.in +4
-2@@ -1,11 +1,13 @@ config BR2_PACKAGE_PYTHON_LIBUSB1 bool "python-libusb1" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Pure-python wrapper for libusb-1.0. http://github.com/vpelletier/python-libusb1 -comment "python-libusb1 needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "python-libusb1 needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/python-nfc/Config.in +4
-2@@ -2,6 +2,7 @@ config BR2_PACKAGE_PYTHON_NFC bool "python-nfc" depends on BR2_PACKAGE_PYTHON depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB select BR2_PACKAGE_LIBUSB_COMPAT help@@ -9,6 +10,7 @@ config BR2_PACKAGE_PYTHON_NFC https://launchpad.net/nfcpy -comment "python-nfc needs a toolchain w/ threads" +comment "python-nfc needs a toolchain w/ threads, gcc >= 4.9" depends on BR2_PACKAGE_PYTHON - depends on !BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/python-pylibftdi/Config.in +4
-2@@ -1,11 +1,13 @@ config BR2_PACKAGE_PYTHON_PYLIBFTDI bool "python-pylibftdi" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb select BR2_PACKAGE_LIBFTDI help This package contains the python language binding libftdi. https://pypi.python.org/pypi/pylibftdi -comment "python-pylibftdi needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "python-pylibftdi needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/python-pyusb/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_PYTHON_PYUSB bool "python-pyusb" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help The PyUSB module provides easy access to the Universal@@ -8,5 +9,6 @@ config BR2_PACKAGE_PYTHON_PYUSB http://sourceforge.net/apps/trac/pyusb/ -comment "python-pyusb needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "python-pyusb needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/qemu/Config.in.host +4
-0@@ -88,7 +88,11 @@ config BR2_PACKAGE_HOST_QEMU_VIRTFS config BR2_PACKAGE_HOST_QEMU_USB bool "USB passthrough support" + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help Enables USB passthrough support from guest to host. +comment "USB passthrough support needs a toolchain w/ host gcc >= 4.9" + depends on !BR2_HOST_GCC_AT_LEAST_4_9 + endifpackage/raspberrypi-usbboot/Config.in.host +5
-0@@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_RASPBERRYPI_USBBOOT bool "host raspberrypi-usbboot" depends on BR2_arm + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This package builds and install the "rpiboot" tool for the host machine. This tool allows to boot the Broadcom BCM@@ -10,3 +11,7 @@ config BR2_PACKAGE_HOST_RASPBERRYPI_USBBOOT built into the Compute module). https://github.com/raspberrypi/usbboot + +comment "host raspberrypi-usbboot needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/sispmctl/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_SISPMCTL bool "sispmctl" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_WCHAR depends on BR2_USE_MMU # fork() select BR2_PACKAGE_LIBUSB@@ -13,6 +14,7 @@ config BR2_PACKAGE_SISPMCTL http://sispmctl.sourceforge.net/ -comment "sispmctl needs a toolchain w/ threads, wchar" - depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR +comment "sispmctl needs a toolchain w/ threads, wchar, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 depends on BR2_USE_MMUpackage/sunxi-tools/Config.in +4
-2@@ -24,14 +24,16 @@ config BR2_PACKAGE_SUNXI_TOOLS_BOOTINFO config BR2_PACKAGE_SUNXI_TOOLS_FEL bool "sunxi-fel" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help The sunxi-fel command can interact with a sunxi device in fel mode. This allows do download code to memory and execute it. -comment "sunxi-fel needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "sunxi-fel needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_SUNXI_TOOLS_NAND_PART bool "sunxi-nand-part"package/sunxi-tools/Config.in.host +5
-0@@ -1,6 +1,7 @@ config BR2_PACKAGE_HOST_SUNXI_TOOLS bool "host sunxi-tools" depends on BR2_arm + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help Tools for Allwinner A10 (aka sun4i) and A13 (aka sun5i) based devices. This includes fex2bin which can be used to@@ -10,3 +11,7 @@ config BR2_PACKAGE_HOST_SUNXI_TOOLS mainline Linux kernel version. http://linux-sunxi.org/Sunxi-tools + +comment "host sunxi-tools needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/tegrarcm/Config.in.host +5
-0@@ -1,8 +1,13 @@ config BR2_PACKAGE_HOST_TEGRARCM bool "host tegrarcm" depends on BR2_arm || BR2_armeb + depends on BR2_HOST_GCC_AT_LEAST_4_9 # host-libusb help This program is used to send code to a Tegra device in recovery mode. https://github.com/NVIDIA/tegrarcm + +comment "host tegrarcm needs a toolchain w/ host gcc >= 4.9" + depends on BR2_arm || BR2_armeb + depends on !BR2_HOST_GCC_AT_LEAST_4_9package/uhd/Config.in +12
-0@@ -33,16 +33,24 @@ if BR2_PACKAGE_UHD config BR2_PACKAGE_UHD_B100 bool "b100 support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_UHD_USB help enable B100 support +comment "B100 support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_UHD_B200 bool "b200 support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_UHD_USB help enable B200 support +comment "B200 support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + config BR2_PACKAGE_UHD_E300 bool "E300 support" select BR2_PACKAGE_UHD_MPMD@@ -72,8 +80,12 @@ config BR2_PACKAGE_UHD_RFNOC config BR2_PACKAGE_UHD_USB bool "USB support" + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help enable UHD USB support +comment "USB support needs a toolchain w/ gcc >= 4.9" + depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 + endifpackage/uhubctl/Config.in +4
-2@@ -1,11 +1,13 @@ config BR2_PACKAGE_UHUBCTL bool "uhubctl" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help Control USB power per-port on smart USB hubs. https://github.com/mvp/uhubctl -comment "uhubctl needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "uhubctl needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/upower/Config.in +4
-2@@ -2,6 +2,7 @@ config BR2_PACKAGE_UPOWER bool "upower" depends on BR2_PACKAGE_HAS_UDEV depends on BR2_TOOLCHAIN_HAS_THREADS # libgudev, libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb depends on BR2_USE_MMU # libgudev depends on BR2_USE_WCHAR # libgudev select BR2_PACKAGE_LIBGUDEV@@ -22,6 +23,7 @@ comment "upower needs udev /dev management" depends on BR2_USE_MMU depends on !BR2_PACKAGE_HAS_UDEV -comment "upower needs a toolchain w/ threads, wchar" +comment "upower needs a toolchain w/ threads, wchar, gcc >= 4.9" depends on BR2_USE_MMU - depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/usb_modeswitch/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_USB_MODESWITCH bool "usb_modeswitch" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_JIMTCL if !BR2_PACKAGE_TCL || BR2_PACKAGE_TCL_SHLIB_ONLY select BR2_PACKAGE_LIBUSB help@@ -20,5 +21,6 @@ config BR2_PACKAGE_USB_MODESWITCH http://www.draisberghof.de/usb_modeswitch/ -comment "usb_modeswitch needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "usb_modeswitch needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/usb_modeswitch_data/Config.in +4
-2@@ -1,6 +1,7 @@ config BR2_PACKAGE_USB_MODESWITCH_DATA bool "usb_modeswitch_data" depends on BR2_TOOLCHAIN_HAS_THREADS # usb_modeswitch -> libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # usb_modeswitch -> libusb select BR2_PACKAGE_USB_MODESWITCH help USB mode switch data@@ -9,5 +10,6 @@ config BR2_PACKAGE_USB_MODESWITCH_DATA http://www.draisberghof.de/usb_modeswitch/ -comment "usb_modeswitch_data needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "usb_modeswitch_data needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9package/usbredir/Config.in +4
-2@@ -1,9 +1,11 @@ -comment "usbredir needs a toolchain w/ threads" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "usbredir needs a toolchain w/ threads, gcc >= 4.9" + depends on !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 config BR2_PACKAGE_USBREDIR bool "usbredir" depends on BR2_TOOLCHAIN_HAS_THREADS # libusb + depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb select BR2_PACKAGE_LIBUSB help usbredir is the name of a network protocol for sending usbSignature · 1 line
2.29.2
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'