Skip to contentSkip to conversation

amdgpu, pci: improved BAR resizing support

PATCH New Darren Salt 1 participant 9 messages Dec 15, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover amdgpu, pci: improved BAR resizing support

This patch series improves the existing BAR resizing support in amdgpu. By default, it will attempt to resize BAR0 for each supported dGPU present to cover the VRAM.

Basic boot-time (or module load time) options to control this resizing are
implemented: one to control the maximum BAR size (may extend, may shrink) and one to control whether the sizes advertised as supported by the VBIOS are ignored. At present, these are coarse; there is no support for applying limits to specific GPUs in multi-GPU systems.

The override and the quirks list (which uses it) are to cope with GPU VBIOSes which don't properly advertise supported BAR sizes. Mine appears to be one such.

Darren Salt (8):
pci: export pci_rebar_get_possible_sizes
pci: add BAR bytes->size helper & expose size->bytes helper
amdgpu: resize BAR0 to the maximum available size, even if it doesn't
cover VRAM (v5)
amdgpu: limit maximum BAR0 size when attempting to enlarge (v3)
pci: allow for overriding the list of advertised BAR sizes
amdgpu: allow overriding of the GPU's list of supported BAR sizes (v3)
amdgpu: implement a BAR size quirks list
amdgpu: add a BAR size quirk for Sapphire RX 5600 XT Pulse.

 drivers/gpu/drm/amd/amdgpu/amdgpu.h        |   2 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 102 +++++++++++++++++++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c    |  19 ++++
 drivers/pci/pci.c                          |   1 +
 drivers/pci/pci.h                          |   5 -
 drivers/pci/setup-res.c                    |   4 +-
 include/linux/pci.h                        |  12 ++-
 7 files changed, 127 insertions(+), 18 deletions(-)
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#1 lore raw

PATCH 1/8 pci: export pci_rebar_get_possible_sizes

This is to assist driver modules which do BAR resizing.

---
 drivers/pci/pci.c   | 1 +
 drivers/pci/pci.h   | 1 -
 include/linux/pci.h | 1 +
 3 files changed, 2 insertions(+), 1 deletion(-)
drivers/pci/pci.c +1 -0
index e578d34095e9..ef80ed451415 100644
@@ -3579,6 +3579,7 @@ u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar)
 	pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap);
 	return (cap & PCI_REBAR_CAP_SIZES) >> 4;
 }
+EXPORT_SYMBOL(pci_rebar_get_possible_sizes);
 
 /**
  * pci_rebar_get_current_size - get the current size of a BAR
drivers/pci/pci.h +0 -1
index f86cae9aa1f4..640ae7d74fc3 100644
@@ -608,7 +608,6 @@ int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment,
 			  struct resource *res);
 #endif
 
-u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar);
 int pci_rebar_get_current_size(struct pci_dev *pdev, int bar);
 int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size);
 static inline u64 pci_rebar_size_to_bytes(int size)
include/linux/pci.h +1 -0
index 22207a79762c..9999040cfad9 100644
@@ -1226,6 +1226,7 @@ void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
 int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
 void pci_release_resource(struct pci_dev *dev, int resno);
+u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar);
 int __must_check pci_resize_resource(struct pci_dev *dev, int i, int size);
 int pci_select_bars(struct pci_dev *dev, unsigned long flags);
 bool pci_device_is_present(struct pci_dev *pdev);
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#2 lore raw

PATCH 2/8 pci: add BAR bytes->size helper & expose size->bytes helper

In reply to Darren Salt

This is to assist driver modules which do BAR resizing.

---
 drivers/pci/pci.h   | 4 ----
 include/linux/pci.h | 9 +++++++++
 2 files changed, 9 insertions(+), 4 deletions(-)
drivers/pci/pci.h +0 -4
index 640ae7d74fc3..0fa31ff3d4e4 100644
@@ -610,10 +610,6 @@ int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment,
 
 int pci_rebar_get_current_size(struct pci_dev *pdev, int bar);
 int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size);
-static inline u64 pci_rebar_size_to_bytes(int size)
-{
-	return 1ULL << (size + 20);
-}
 
 struct device_node;
 
include/linux/pci.h +9 -0
index 9999040cfad9..41e93ea9756b 100644
@@ -1226,6 +1226,15 @@ void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
 int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
 void pci_release_resource(struct pci_dev *dev, int resno);
+static __always_inline int pci_rebar_bytes_to_size(u64 bytes)
+{
+	bytes = roundup_pow_of_two(bytes);
+	return order_base_2(((bytes >> 20) | 1)) - 1;
+}
+static __always_inline u64 pci_rebar_size_to_bytes(int size)
+{
+	return 1ULL << (size + 20);
+}
 u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar);
 int __must_check pci_resize_resource(struct pci_dev *dev, int i, int size);
 int pci_select_bars(struct pci_dev *dev, unsigned long flags);
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#3 lore raw

PATCH 3/8 amdgpu: resize BAR0 to the maximum available size, even if it doesn't cover VRAM (v5)

In reply to Darren Salt

This allows BAR0 resizing to be done for cards which don't advertise support for a size large enough to cover the VRAM but which do advertise at least one size larger than the default. For example, my RX 5600 XT, which advertises 256MB, 512MB and 1GB.

[v5] Drop the retry loop…

[v4] Use bit ops to find sizes to try.

[v3] Don't use pci_rebar_get_current_size().

[v2] Rewritten to use PCI helper functions; some extra log text.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 38 +++++++++++++++++-----
 1 file changed, 29 insertions(+), 9 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +29 -9
index 6637b84aeb85..ac94f8db06a8 100644
@@ -1106,8 +1106,9 @@ void amdgpu_device_wb_free(struct amdgpu_device *adev, u32 wb)
  */
 int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 {
-	u64 space_needed = roundup_pow_of_two(adev->gmc.real_vram_size);
-	u32 rbar_size = order_base_2(((space_needed >> 20) | 1)) - 1;
+	int rbar_size, current_size;
+	u64 current_bytes;
+	u32 available_sizes;
 	struct pci_bus *root;
 	struct resource *res;
 	unsigned i;
@@ -1118,11 +1119,15 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	if (amdgpu_sriov_vf(adev))
 		return 0;
 
-	/* skip if the bios has already enabled large BAR */
-	if (adev->gmc.real_vram_size &&
-	    (pci_resource_len(adev->pdev, 0) >= adev->gmc.real_vram_size))
+	current_bytes = pci_resource_len(adev->pdev, 0);
+
+	/* Skip if the BIOS has already enabled large BAR, covering the VRAM */
+	if (current_bytes >= adev->gmc.real_vram_size)
 		return 0;
 
+	current_size = current_bytes ? pci_rebar_bytes_to_size(current_bytes) : -1;
+	rbar_size = pci_rebar_bytes_to_size(adev->gmc.real_vram_size);
+
 	/* Check if the root BUS has 64bit memory resources */
 	root = adev->pdev->bus;
 	while (root->parent)
@@ -1138,6 +1143,18 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	if (!res)
 		return 0;
 
+	available_sizes = pci_rebar_get_possible_sizes(adev->pdev, 0);
+	if (available_sizes == 0)
+		return 0;
+
+	/* Find the bit pos representing the smallest size covering the VRAM.
+	 * Otherwise find the bit pos representing the largest available size.
+	 * rbar_size may be smaller but should be unchanged.
+	 */
+	rbar_size = (ffs(available_sizes & (-1 << rbar_size)) ? : fls(available_sizes)) - 1;
+	if (rbar_size < 0)
+		return 0; /* can't happen */
+
 	/* Disable memory decoding while we change the BAR addresses and size */
 	pci_read_config_word(adev->pdev, PCI_COMMAND, &cmd);
 	pci_write_config_word(adev->pdev, PCI_COMMAND,
@@ -1151,10 +1168,13 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	pci_release_resource(adev->pdev, 0);
 
 	r = pci_resize_resource(adev->pdev, 0, rbar_size);
-	if (r == -ENOSPC)
-		DRM_INFO("Not enough PCI address space for a large BAR.");
-	else if (r && r != -ENOTSUPP)
-		DRM_ERROR("Problem resizing BAR0 (%d).", r);
+	if (r == -ENOTSUPP) {
+		dev_info(adev->dev, "BAR resizing not supported.");
+	} else if (r == -ENOSPC) {
+		dev_info(adev->dev, "Not enough PCI address space for a large BAR.");
+	} else if (r) {
+		dev_err(adev->dev, "Problem resizing BAR0 (%d).", r);
+	}
 
 	pci_assign_unassigned_bus_resources(adev->pdev->bus);
 
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#4 lore raw

PATCH 4/8 amdgpu: limit maximum BAR0 size when attempting to enlarge (v3)

In reply to Darren Salt

This is coarse, applying to all dGPUs.

[v3] On -ENOSPC, include the size attempted in the logged error.

[v2] If there are no advertised sizes small enough, limit to the smallest available.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h        |  1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 32 ++++++++++++++++++----
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c    |  9 ++++++
 3 files changed, 37 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu.h +1 -0
index c228e7470d51..0b17e758e3f1 100644
@@ -201,6 +201,7 @@ static const bool __maybe_unused no_system_mem_limit;
 
 extern int amdgpu_tmz;
 extern int amdgpu_reset_method;
+extern int amdgpu_max_bar_size;
 
 #ifdef CONFIG_DRM_AMDGPU_SI
 extern int amdgpu_si_support;
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +27 -5
index ac94f8db06a8..fde5aaf97dc6 100644
@@ -1107,6 +1107,7 @@ void amdgpu_device_wb_free(struct amdgpu_device *adev, u32 wb)
 int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 {
 	int rbar_size, current_size;
+	int max_size = -1;
 	u64 current_bytes;
 	u32 available_sizes;
 	struct pci_bus *root;
@@ -1121,13 +1122,20 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 
 	current_bytes = pci_resource_len(adev->pdev, 0);
 
-	/* Skip if the BIOS has already enabled large BAR, covering the VRAM */
-	if (current_bytes >= adev->gmc.real_vram_size)
-		return 0;
-
 	current_size = current_bytes ? pci_rebar_bytes_to_size(current_bytes) : -1;
 	rbar_size = pci_rebar_bytes_to_size(adev->gmc.real_vram_size);
 
+	/* If a maximum size is set, skip if that is the current size */
+	if (amdgpu_max_bar_size >= 0) {
+		max_size = max(amdgpu_max_bar_size, 8); /* clamp to min. 256MB */
+		if (current_size == max_size)
+			return 0;
+		rbar_size = max_size;
+	}
+	/* Else skip if the BAR already covers the VRAM */
+	else if (current_bytes >= adev->gmc.real_vram_size)
+		return 0;
+
 	/* Check if the root BUS has 64bit memory resources */
 	root = adev->pdev->bus;
 	while (root->parent)
@@ -1144,6 +1152,19 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 		return 0;
 
 	available_sizes = pci_rebar_get_possible_sizes(adev->pdev, 0);
+	if (max_size >= 0) {
+		/* Cause larger sizes to be ignored unless that would leave
+		 * no advertised sizes (which shouldn't happen).
+		 */
+		r = available_sizes & ~(-1 << (max_size + 1));
+		if (!r) {
+			/* No smaller sizes, so use the smallest advertised */
+			r = ffs(r);
+			if (r)
+				r = 1 << (r - 1);
+		}
+		available_sizes = r;
+	}
 	if (available_sizes == 0)
 		return 0;
 
@@ -1171,7 +1192,8 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	if (r == -ENOTSUPP) {
 		dev_info(adev->dev, "BAR resizing not supported.");
 	} else if (r == -ENOSPC) {
-		dev_info(adev->dev, "Not enough PCI address space for a large BAR.");
+		dev_info(adev->dev, "Not enough PCI address space for a %lldMB BAR.",
+		         pci_rebar_size_to_bytes(rbar_size) >> 20);
 	} else if (r) {
 		dev_err(adev->dev, "Problem resizing BAR0 (%d).", r);
 	}
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +9 -0
index cac2724e7615..dd2dc992ed13 100644
@@ -161,6 +161,7 @@ int amdgpu_force_asic_type = -1;
 int amdgpu_tmz;
 int amdgpu_reset_method = -1; /* auto */
 int amdgpu_num_kcq = -1;
+int amdgpu_max_bar_size = -1;
 
 struct amdgpu_mgpu_info mgpu_info = {
 	.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
@@ -807,6 +808,14 @@ module_param_named(bad_page_threshold, amdgpu_bad_page_threshold, int, 0444);
 MODULE_PARM_DESC(num_kcq, "number of kernel compute queue user want to setup (8 if set to greater than 8 or less than 0, only affect gfx 8+)");
 module_param_named(num_kcq, amdgpu_num_kcq, int, 0444);
 
+/**
+ * DOC: max_bar_size (int)
+ * The maximum BAR size, in megabytes. Only affects BARs which the BIOS hasn't already made larger.
+ * Unlimited by default.
+ */
+module_param_named(max_bar_size, amdgpu_max_bar_size, int, 0444);
+MODULE_PARM_DESC(max_bar_size, "Maximum FB BAR size, log2(megabytes) (default = -1, meaning unlimited; minimum is 8 for 256MB).");
+
 static const struct pci_device_id pciidlist[] = {
 #ifdef  CONFIG_DRM_AMDGPU_SI
 	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#5 lore raw

PATCH 5/8 pci: allow for overriding the list of advertised BAR sizes

In reply to Darren Salt

This is intended for devices which are known to work with BAR sizes other than those which they advertise; usually larger.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +-
 drivers/pci/setup-res.c                    | 4 ++--
 include/linux/pci.h                        | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +1 -1
index fde5aaf97dc6..125aca52e25d 100644
@@ -1188,7 +1188,7 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 
 	pci_release_resource(adev->pdev, 0);
 
-	r = pci_resize_resource(adev->pdev, 0, rbar_size);
+	r = pci_resize_resource(adev->pdev, 0, rbar_size, false);
 	if (r == -ENOTSUPP) {
 		dev_info(adev->dev, "BAR resizing not supported.");
 	} else if (r == -ENOSPC) {
drivers/pci/setup-res.c +2 -2
index 43eda101fcf4..3651754de433 100644
@@ -407,7 +407,7 @@ void pci_release_resource(struct pci_dev *dev, int resno)
 }
 EXPORT_SYMBOL(pci_release_resource);
 
-int pci_resize_resource(struct pci_dev *dev, int resno, int size)
+int pci_resize_resource(struct pci_dev *dev, int resno, int size, bool forced)
 {
 	struct resource *res = dev->resource + resno;
 	int old, ret;
@@ -426,7 +426,7 @@ int pci_resize_resource(struct pci_dev *dev, int resno, int size)
 	if (!sizes)
 		return -ENOTSUPP;
 
-	if (!(sizes & BIT(size)))
+	if (!forced && !(sizes & BIT(size)))
 		return -EINVAL;
 
 	old = pci_rebar_get_current_size(dev, resno);
include/linux/pci.h +1 -1
index 41e93ea9756b..badad6df4e16 100644
@@ -1236,7 +1236,7 @@ static __always_inline u64 pci_rebar_size_to_bytes(int size)
 	return 1ULL << (size + 20);
 }
 u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar);
-int __must_check pci_resize_resource(struct pci_dev *dev, int i, int size);
+int __must_check pci_resize_resource(struct pci_dev *dev, int i, int size, bool forced);
 int pci_select_bars(struct pci_dev *dev, unsigned long flags);
 bool pci_device_is_present(struct pci_dev *pdev);
 void pci_ignore_hotplug(struct pci_dev *dev);
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#6 lore raw

PATCH 6/8 amdgpu: allow overriding of the GPU's list of supported BAR sizes (v3)

In reply to Darren Salt

Some cards don't advertise a BAR size which covers all of the VRAM.

Mine, a Sapphire RX 5600 XT Pulse, advertises only 256MB, 512MB and 1GB. Despite this, it appears to work fine with the full 6GB visible via an 8GB BAR.

v3: changed implementation due to changes in preceding patches.

v2: different option controlling this due to a dropped patch.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h        |  1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |  8 ++++++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c    | 10 ++++++++++
 3 files changed, 17 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu.h +1 -0
index 0b17e758e3f1..93285ec7bfc3 100644
@@ -202,6 +202,7 @@ static const bool __maybe_unused no_system_mem_limit;
 extern int amdgpu_tmz;
 extern int amdgpu_reset_method;
 extern int amdgpu_max_bar_size;
+extern bool amdgpu_override_bar_sizes;
 
 #ifdef CONFIG_DRM_AMDGPU_SI
 extern int amdgpu_si_support;
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +6 -2
index 125aca52e25d..8490a96ee25e 100644
@@ -1151,7 +1151,11 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	if (!res)
 		return 0;
 
-	available_sizes = pci_rebar_get_possible_sizes(adev->pdev, 0);
+	if (amdgpu_override_bar_sizes)
+		available_sizes = ~(-1 << rbar_size) & ~0xFF;
+	else
+		available_sizes = pci_rebar_get_possible_sizes(adev->pdev, 0);
+
 	if (max_size >= 0) {
 		/* Cause larger sizes to be ignored unless that would leave
 		 * no advertised sizes (which shouldn't happen).
@@ -1188,7 +1192,7 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 
 	pci_release_resource(adev->pdev, 0);
 
-	r = pci_resize_resource(adev->pdev, 0, rbar_size, false);
+	r = pci_resize_resource(adev->pdev, 0, rbar_size, amdgpu_override_bar_sizes);
 	if (r == -ENOTSUPP) {
 		dev_info(adev->dev, "BAR resizing not supported.");
 	} else if (r == -ENOSPC) {
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +10 -0
index dd2dc992ed13..59f6b95f0875 100644
@@ -162,6 +162,7 @@ int amdgpu_tmz;
 int amdgpu_reset_method = -1; /* auto */
 int amdgpu_num_kcq = -1;
 int amdgpu_max_bar_size = -1;
+bool amdgpu_override_bar_sizes = false;
 
 struct amdgpu_mgpu_info mgpu_info = {
 	.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
@@ -816,6 +817,15 @@ module_param_named(num_kcq, amdgpu_num_kcq, int, 0444);
 module_param_named(max_bar_size, amdgpu_max_bar_size, int, 0444);
 MODULE_PARM_DESC(max_bar_size, "Maximum FB BAR size, log2(megabytes) (default = -1, meaning unlimited; minimum is 8 for 256MB).");
 
+/**
+ * DOC: amdgpu_override_bar_sizes (int)
+ * A blunt instrument for ignoring the listed BAR sizes.
+ * This is intended to handle VBIOSes which list the wrong set of sizes but which aren't recognised as such by the kernel.
+ * Disabled by default.
+ */
+module_param_named(override_bar_sizes, amdgpu_override_bar_sizes, bool, 0444);
+MODULE_PARM_DESC(override_bar_sizes, "Ignore VBIOS supported BAR sizes, for where the list is wrong. (Disabled by default.)");
+
 static const struct pci_device_id pciidlist[] = {
 #ifdef  CONFIG_DRM_AMDGPU_SI
 	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI},
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#7 lore raw

PATCH 7/8 amdgpu: implement a BAR size quirks list

In reply to Darren Salt

Intended for devices which are misreporting available/supported BAR sizes.

This may be insufficient to identify some devices. The inclusion of the reported BAR sizes bitmap is to assist with identification.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 43 ++++++++++++++++++++--
 1 file changed, 39 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +39 -4
index 8490a96ee25e..fde1dfdacd04 100644
@@ -1095,6 +1095,34 @@ void amdgpu_device_wb_free(struct amdgpu_device *adev, u32 wb)
 		__clear_bit(wb, adev->wb.used);
 }
 
+static const struct amdgpu_rebar_quirk {
+	u32 chip_vendor, chip_device;
+	u32 subsys_vendor, subsys_device;
+	int reported_sizes;	/* 0, or as reported by pci_rebar_get_possible_sizes */
+	int available_sizes;	/* bitmap (-256 for anything >= 256MB, effectively automatic) */
+} amdgpu_rebar_quirk_list[] = {
+	{ 0, 0, 0, 0, 0, 0 }
+};
+
+static int amdgpu_rebar_quirk_check(struct amdgpu_device *adev, int reported_sizes)
+{
+	const struct pci_dev *pdev = adev->pdev;
+	const struct amdgpu_rebar_quirk *p = amdgpu_rebar_quirk_list;
+
+	while (p && p->chip_device != 0) {
+		if (pdev->vendor == p->chip_vendor &&
+		    pdev->device == p->chip_device &&
+		    pdev->subsystem_vendor == p->subsys_vendor &&
+		    pdev->subsystem_device == p->subsys_device &&
+		    (!reported_sizes || !p->available_sizes || reported_sizes == p->reported_sizes)) {
+			dev_info(adev->dev, "quirk: overriding BAR possible sizes list.");
+			return p->available_sizes;
+		}
+		++p;
+	}
+	return 0;
+}
+
 /**
  * amdgpu_device_resize_fb_bar - try to resize FB BAR
  *
@@ -1115,6 +1143,7 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	unsigned i;
 	u16 cmd;
 	int r;
+	bool override_bar_sizes = amdgpu_override_bar_sizes;
 
 	/* Bypass for VF */
 	if (amdgpu_sriov_vf(adev))
@@ -1151,10 +1180,16 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	if (!res)
 		return 0;
 
-	if (amdgpu_override_bar_sizes)
+	if (override_bar_sizes)
 		available_sizes = ~(-1 << rbar_size) & ~0xFF;
-	else
-		available_sizes = pci_rebar_get_possible_sizes(adev->pdev, 0);
+	else {
+		int q = amdgpu_rebar_quirk_check(adev, available_sizes);
+		if (q)
+			override_bar_sizes = true;
+		else
+			q = pci_rebar_get_possible_sizes(adev->pdev, 0);
+		available_sizes = q;
+	}
 
 	if (max_size >= 0) {
 		/* Cause larger sizes to be ignored unless that would leave
@@ -1192,7 +1227,7 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 
 	pci_release_resource(adev->pdev, 0);
 
-	r = pci_resize_resource(adev->pdev, 0, rbar_size, amdgpu_override_bar_sizes);
+	r = pci_resize_resource(adev->pdev, 0, rbar_size, override_bar_sizes);
 	if (r == -ENOTSUPP) {
 		dev_info(adev->dev, "BAR resizing not supported.");
 	} else if (r == -ENOSPC) {
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
#8 lore raw

PATCH 8/8 amdgpu: add a BAR size quirk for Sapphire RX 5600 XT Pulse.

In reply to Darren Salt
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +1 -0
index fde1dfdacd04..b4f3e5a2763e 100644
@@ -1101,6 +1101,7 @@ static const struct amdgpu_rebar_quirk {
 	int reported_sizes;	/* 0, or as reported by pci_rebar_get_possible_sizes */
 	int available_sizes;	/* bitmap (-256 for anything >= 256MB, effectively automatic) */
 } amdgpu_rebar_quirk_list[] = {
+	{ 0x1002, 0x731f, 0x1da2, 0xe416,  0x700, -256 },	/* Sapphire RX 5600 XT Pulse */
 	{ 0, 0, 0, 0, 0, 0 }
 };
 
Signature · 6 lines
2.20.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx