board: amlogic: add WeTek Core2 support
Subsystems (2)
cover board: amlogic: add WeTek Core2 support
This patchset adds support for the WeTek Core2 box which is based on the Amlogic S912 (GXM) SoC. Patches are based on u-boot-amlogic-next branch in the custodians tree.
Christian Hewitt (3):
ARM: dts: import WeTek Core2 DTs from Linux 5.10
boards: amlogic: add WeTek Core2 support
boards: amlogic: update documentation for WeTek Core2
arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-gx-p23x-q20x.dtsi | 324 ++++++++++++++++++ .../arm/dts/meson-gxm-wetek-core2-u-boot.dtsi | 7 + arch/arm/dts/meson-gxm-wetek-core2.dts | 87 +++++ configs/wetek-core2_defconfig | 70 ++++ doc/board/amlogic/index.rst | 3 +- doc/board/amlogic/wetek-core2.rst | 90 +++++ 7 files changed, 581 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-gx-p23x-q20x.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2.dts create mode 100644 configs/wetek-core2_defconfig create mode 100644 doc/board/amlogic/wetek-core2.rst
Signature · 1 line
2.17.1
PATCH 1/3 ARM: dts: import WeTek Core2 DTs from Linux 5.10
Import the WeTek Core2 and supporting meson-gx-p23x-q20x.dtsi files from Linux 5.10.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-gx-p23x-q20x.dtsi | 324 ++++++++++++++++++ .../arm/dts/meson-gxm-wetek-core2-u-boot.dtsi | 7 + arch/arm/dts/meson-gxm-wetek-core2.dts | 87 +++++ 4 files changed, 419 insertions(+) create mode 100644 arch/arm/dts/meson-gx-p23x-q20x.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2.dts
arch/arm/dts/Makefile +1 -0
@@ -166,6 +166,7 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxl-s905d-libretech-pc.dtb \ meson-gxm-khadas-vim2.dtb \ meson-gxm-s912-libretech-pc.dtb \ + meson-gxm-wetek-core2.dtb \ meson-axg-s400.dtb \ meson-g12a-u200.dtb \ meson-g12a-sei510.dtb \
arch/arm/dts/meson-gx-p23x-q20x.dtsi new file +324 -0
324 lines not on this page · raw message
arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Neil Armstrong <[email protected]> + */ + +#include "meson-gxl-u-boot.dtsi"
arch/arm/dts/meson-gxm-wetek-core2.dts new file +87 -0
87 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 2/3 boards: amlogic: add WeTek Core2 support
In reply to Christian HewittAdd a config for the WeTek Core2, largely based on the VIM2 config.
--- configs/wetek-core2_defconfig | 70 +++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 configs/wetek-core2_defconfig
configs/wetek-core2_defconfig new file +70 -0
@@ -0,0 +1,70 @@ +CONFIG_ARM=y +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_MESON_GXM=y +CONFIG_DEBUG_UART_BASE=0xc81004c0 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" wetek-core2" +CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-wetek-core2" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_CONSOLE_MUX=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_MISC_INIT_R=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SARADC_MESON=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MESON_GXL_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_GXL=y +CONFIG_DM_REGULATOR=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_MESON=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_KEYBOARD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_GXL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.17.1
PATCH 3/3 boards: amlogic: update documentation for WeTek Core2
In reply to Christian HewittUpdate the device matrix and add build instructions.
--- doc/board/amlogic/index.rst | 3 +- doc/board/amlogic/wetek-core2.rst | 90 +++++++++++++++++++++++++++++++ 2 files changed, 92 insertions(+), 1 deletion(-) create mode 100644 doc/board/amlogic/wetek-core2.rst
doc/board/amlogic/index.rst +2 -1
@@ -17,7 +17,7 @@ This matrix concerns the actual source code version. +===============================+===========+=================+==============+============+============+=============+==============+ | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | -| | P200 | LibreTech-CC v1 | | | | | Odroid-C4 | +| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 | | | P201 | LibreTech-AC v2 | | | | | | +-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
@@ -95,4 +95,5 @@ Board Documentation sei510 sei610 u200 + wetek-core2 w400
doc/board/amlogic/wetek-core2.rst new file +90 -0
90 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 9 lines · Christian Hewitt
This patchset adds support for the WeTek Core2 box which is based on the Amlogic S912 (GXM) SoC. Patches are based on u-boot-amlogic-next branch in the custodians tree.
Christian Hewitt (3):
ARM: dts: import WeTek Core2 DTs from Linux 5.10
boards: amlogic: add WeTek Core2 support
boards: amlogic: update documentation for WeTek Core2
Quoted 14 lines
arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-gx-p23x-q20x.dtsi | 324 ++++++++++++++++++ .../arm/dts/meson-gxm-wetek-core2-u-boot.dtsi | 7 + arch/arm/dts/meson-gxm-wetek-core2.dts | 87 +++++ configs/wetek-core2_defconfig | 70 ++++ doc/board/amlogic/index.rst | 3 +- doc/board/amlogic/wetek-core2.rst | 90 +++++ 7 files changed, 581 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-gx-p23x-q20x.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2.dts create mode 100644 configs/wetek-core2_defconfig create mode 100644 doc/board/amlogic/wetek-core2.rst
Applying to u-boot-amlogic-next