Skip to contentSkip to conversation

spi: Fix the clamping of spi->max_speed_hz

PATCH In review Tudor Ambarus 3 participants 3 messages Dec 16, 2020 – Dec 31, 2020 SPI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: Fix the clamping of spi->max_speed_hz

If spi->controller->max_speed_hz is zero, a non-zero spi->max_speed_hz will be overwritten by zero. Make sure spi->controller->max_speed_hz is not zero when clamping spi->max_speed_hz.

Put the spi->controller->max_speed_hz non-zero check higher in the if, so that we avoid a superfluous init to zero when both spi->max_speed_hz and spi->controller->max_speed_hz are zero.

Fixes 9326e4f1e5dd ("spi: Limit the spi device max speed to controller's max speed")
---
 drivers/spi/spi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/spi/spi.c +3 -2
index 51d7c004fbab..f59bf5094adb 100644
@@ -3378,8 +3378,9 @@ int spi_setup(struct spi_device *spi)
 	if (status)
 		return status;
 
-	if (!spi->max_speed_hz ||
-	    spi->max_speed_hz > spi->controller->max_speed_hz)
+	if (spi->controller->max_speed_hz &&
+	    (!spi->max_speed_hz ||
+	     spi->max_speed_hz > spi->controller->max_speed_hz))
 		spi->max_speed_hz = spi->controller->max_speed_hz;
 
 	mutex_lock(&spi->controller->io_mutex);
Signature · 1 line
2.25.1
Tested-by on v1 1/1
#1 lore raw
Quoted 4 lines · Tudor Ambarus

If spi->controller->max_speed_hz is zero, a non-zero spi->max_speed_hz will be overwritten by zero. Make sure spi->controller->max_speed_hz is not zero when clamping spi->max_speed_hz.

Quoted 8 lines

Put the spi->controller->max_speed_hz non-zero check higher in the if, so that we avoid a superfluous init to zero when both spi->max_speed_hz and spi->controller->max_speed_hz are zero.

Fixes 9326e4f1e5dd ("spi: Limit the spi device max speed to controller's max speed")

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
maintainer
#2 lore raw
In reply to Tudor Ambarus
Quoted 7 lines · Tudor Ambarus

If spi->controller->max_speed_hz is zero, a non-zero spi->max_speed_hz will be overwritten by zero. Make sure spi->controller->max_speed_hz is not zero when clamping spi->max_speed_hz.

Put the spi->controller->max_speed_hz non-zero check higher in the if, so that we avoid a superfluous init to zero when both spi->max_speed_hz and spi->controller->max_speed_hz are zero.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: Fix the clamping of spi->max_speed_hz

      commit: 6820e812dafb4258bc14692f686eec5bde6fba86

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark