target/mips/mips-defs: Simplify ISA definitions
v2 cover target/mips/mips-defs: Simplify ISA definitions
v2: Do not use MIPS3 for 64R1 (Jiaxun)
As we don't need to duplicate 32/64-bit ISA defititions, this series remove the duplicated 64-bit variants, simplifying the overall.
Changes done automatically with my editor using "find and replace".
While the 'ISA_MIPS_Rx' form is shorter than 'ISA_MIPS_RELx', which one is the clearer?
Regards,
Phil.
$ git backport-diff -u v1 -r ..v2 Key: [----] : patches are identical [####] : number of functional differences between upstream/downstream patch [down] : patch is downstream-only The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively
001/12:[----] [--] 'target/mips/mips-defs: Reorder CPU_MIPS5 definition' 002/12:[0013] [FC] 'target/mips/mips-defs: Use ISA_MIPS3 for ISA_MIPS64' 003/12:[down] 'target/mips/mips-defs: Use ISA_MIPS32 definition to check Release 1' 004/12:[----] [--] 'target/mips/mips-defs: Use ISA_MIPS32R2 definition to check Release 2' 005/12:[----] [--] 'target/mips/mips-defs: Use ISA_MIPS32R3 definition to check Release 3' 006/12:[----] [--] 'target/mips/mips-defs: Use ISA_MIPS32R5 definition to check Release 5' 007/12:[----] [--] 'target/mips/mips-defs: Use ISA_MIPS32R6 definition to check Release 6' 008/12:[0010] [FC] 'target/mips/mips-defs: Rename ISA_MIPS32 as ISA_MIPS_R1' 009/12:[----] [--] 'target/mips/mips-defs: Rename ISA_MIPS32R2 as ISA_MIPS_R2' 010/12:[----] [--] 'target/mips/mips-defs: Rename ISA_MIPS32R3 as ISA_MIPS_R3' 011/12:[----] [--] 'target/mips/mips-defs: Rename ISA_MIPS32R5 as ISA_MIPS_R5' 012/12:[----] [--] 'target/mips/mips-defs: Rename ISA_MIPS32R6 as ISA_MIPS_R6'
Philippe Mathieu-Daudé (12):
target/mips/mips-defs: Reorder CPU_MIPS5 definition target/mips/mips-defs: Use ISA_MIPS3 for ISA_MIPS64 target/mips/mips-defs: Use ISA_MIPS32 definition to check Release 1 target/mips/mips-defs: Use ISA_MIPS32R2 definition to check Release 2 target/mips/mips-defs: Use ISA_MIPS32R3 definition to check Release 3 target/mips/mips-defs: Use ISA_MIPS32R5 definition to check Release 5 target/mips/mips-defs: Use ISA_MIPS32R6 definition to check Release 6 target/mips/mips-defs: Rename ISA_MIPS32 as ISA_MIPS_R1 target/mips/mips-defs: Rename ISA_MIPS32R2 as ISA_MIPS_R2 target/mips/mips-defs: Rename ISA_MIPS32R3 as ISA_MIPS_R3 target/mips/mips-defs: Rename ISA_MIPS32R5 as ISA_MIPS_R5 target/mips/mips-defs: Rename ISA_MIPS32R6 as ISA_MIPS_R6
target/mips/internal.h | 8 +- target/mips/mips-defs.h | 40 +-- hw/mips/boston.c | 2 +- linux-user/elfload.c | 2 +- linux-user/mips/cpu_loop.c | 6 +- target/mips/cp0_helper.c | 18 +- target/mips/cp0_timer.c | 4 +- target/mips/cpu.c | 12 +- target/mips/fpu_helper.c | 4 +- target/mips/tlb_helper.c | 6 +- target/mips/translate.c | 620 ++++++++++++++++++------------------- 11 files changed, 357 insertions(+), 365 deletions(-)
Signature · 1 line
2.26.2
PATCH v2 1/12 target/mips/mips-defs: Reorder CPU_MIPS5 definition
Move CPU_MIPS5 after CPU_MIPS4 :)
--- target/mips/mips-defs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
target/mips/mips-defs.h +1 -2
@@ -70,13 +70,12 @@#define CPU_MIPS2 (CPU_MIPS1 | ISA_MIPS2)#define CPU_MIPS3 (CPU_MIPS2 | ISA_MIPS3)#define CPU_MIPS4 (CPU_MIPS3 | ISA_MIPS4) +#define CPU_MIPS5 (CPU_MIPS4 | ISA_MIPS5)#define CPU_VR54XX (CPU_MIPS4 | INSN_VR54XX)#define CPU_R5900 (CPU_MIPS3 | INSN_R5900)#define CPU_LOONGSON2E (CPU_MIPS3 | INSN_LOONGSON2E)#define CPU_LOONGSON2F (CPU_MIPS3 | INSN_LOONGSON2F | ASE_LMMI) -#define CPU_MIPS5 (CPU_MIPS4 | ISA_MIPS5) -/* MIPS Technologies "Release 1" */ #define CPU_MIPS32 (CPU_MIPS2 | ISA_MIPS32)#define CPU_MIPS64 (CPU_MIPS5 | CPU_MIPS32 | ISA_MIPS64)
Signature · 1 line
2.26.2
Re: [PATCH v2 01/12] target/mips/mips-defs: Reorder CPU_MIPS5 definition
Quoted 7 lines · Philippe Mathieu-Daudé
Move
CPU_MIPS5afterCPU_MIPS4:)Reviewed-by Jiaxun Yang <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
r~
PATCH v2 2/12 target/mips/mips-defs: Use ISA_MIPS3 for ISA_MIPS64
In reply to Philippe Mathieu-DaudéMIPS 64-bit ISA is introduced with MIPS3.
No need for another bit/definition to check for 64-bit.
--- target/mips/mips-defs.h | 2 +- hw/mips/boston.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
target/mips/mips-defs.h +1 -1
@@ -19,7 +19,7 @@*/ #define ISA_MIPS1 0x0000000000000001ULL#define ISA_MIPS2 0x0000000000000002ULL -#define ISA_MIPS3 0x0000000000000004ULL +#define ISA_MIPS3 0x0000000000000004ULL/* 64-bit */ #define ISA_MIPS4 0x0000000000000008ULL#define ISA_MIPS5 0x0000000000000010ULL#define ISA_MIPS32 0x0000000000000020ULL
hw/mips/boston.c +1 -1
@@ -463,7 +463,7 @@ static void boston_mach_init(MachineState *machine)exit (1 ); } - is_64b =cpu_type_supports_isa (machine->cpu_type,ISA_MIPS64 ); + is_64b =cpu_type_supports_isa (machine->cpu_type,ISA_MIPS3 );object_initialize_child (OBJECT (machine),"cps" , &s->cps,TYPE_MIPS_CPS ); object_property_set_str(OBJECT(&s->cps), "cpu-type", machine->cpu_type,
Signature · 1 line
2.26.2
Re: [PATCH v2 02/12] target/mips/mips-defs: Use ISA_MIPS3 for ISA_MIPS64
Quoted 28 lines · Philippe Mathieu-Daudé
MIPS 64-bit ISA is introduced with MIPS3.
No need for another bit/definition to check for 64-bit.Suggested-by Jiaxun Yang <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 2 +- hw/mips/boston.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)target/mips/mips-defs.h +1
-1@@ -19,7 +19,7 @@*/ #define ISA_MIPS1 0x0000000000000001ULL#define ISA_MIPS2 0x0000000000000002ULL -#define ISA_MIPS3 0x0000000000000004ULL +#define ISA_MIPS3 0x0000000000000004ULL/* 64-bit */ #define ISA_MIPS4 0x0000000000000008ULL#define ISA_MIPS5 0x0000000000000010ULL#define ISA_MIPS32 0x0000000000000020ULLhw/mips/boston.c +0
-0
hw/mips/boston.c static void boston_mach_init(MachineState *machine) · line 466
Quoted 5 lines
hw/mips/boston.c +1
-1@@ -463,7 +463,7 @@ static void boston_mach_init(MachineState *machine)exit (1 ); } - is_64b =cpu_type_supports_isa (machine->cpu_type,ISA_MIPS64 ); + is_64b =cpu_type_supports_isa (machine->cpu_type,ISA_MIPS3 );
Find this slightly confusing.
After all of the renaming, I would expect ISA_MIPS64R6 -> ISA_MIPS_R6 | ISA_MIPS_64, not ISA_MIPS_R6 | ISA_MIPS3.
r~
Re: [PATCH v2 02/12] target/mips/mips-defs: Use ISA_MIPS3 for ISA_MIPS64
Quoted 32 lines · Richard Henderson
Quoted 31 lines · Philippe Mathieu-Daudé
MIPS 64-bit ISA is introduced with MIPS3.
No need for another bit/definition to check for 64-bit.Suggested-by Jiaxun Yang <[email protected]>Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 2 +- hw/mips/boston.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)target/mips/mips-defs.h +1
-1@@ -19,7 +19,7 @@*/ #define ISA_MIPS1 0x0000000000000001ULL#define ISA_MIPS2 0x0000000000000002ULL -#define ISA_MIPS3 0x0000000000000004ULL +#define ISA_MIPS3 0x0000000000000004ULL/* 64-bit */ #define ISA_MIPS4 0x0000000000000008ULL#define ISA_MIPS5 0x0000000000000010ULL#define ISA_MIPS32 0x0000000000000020ULLhw/mips/boston.c +0
-0@@ -463,7 +463,7 @@ static void boston_mach_init(MachineState *machine)exit (1 ); }
Quoted 7 lines
hw/mips/boston.c static void boston_mach_init(MachineState *machine) · line 466
Quoted 2 lines
hw/mips/boston.c +1
-1- is_64b =cpu_type_supports_isa (machine->cpu_type,ISA_MIPS64 ); + is_64b =cpu_type_supports_isa (machine->cpu_type,ISA_MIPS3 );Find this slightly confusing.
After all of the renaming, I would expect
ISA_MIPS64R6->ISA_MIPS_R6|ISA_MIPS_64, notISA_MIPS_R6|ISA_MIPS3.
Well all the ISA_* definitions now match:
https://images.anandtech.com/doci/8457/MIPS%20ISA%20Evolution.JPG
Except ISA_NANOMIPS32, which is listed in MD01251-2B-nanoMIPS32PRA-06.09.pdf as an extension, similar to microMIPS:
MIPS32, microMIPS32, and nanoMIPS32 Operating Modes
Release 2 of the MIPS32 Architecture added support for 64-bit coprocessors (and, in particular, 64-bit floating-point units) with 32-bit CPUs. Thus, certain floating-point instructions that previously were enabled by 64-bit operations on a MIPS64 processor now are enabled by new 64-bit floating-point operations.
Release 3 introduced the microMIPS instruction set, allowing all microMIPS processors to implement a 64-bit floating-point unit.
Release 6 introduces the nanoMIPS instruction set. The nanoMIPS instruction set provides access to the same instruction set extensions (example, COP1 floating-point instructions) that microMIPS had access to.
I'd rather keep one definitions per ISA. Eventually if you want a definition to check if a CPU is 32/64-bit we can add an alias:
-- >8 --
target/mips/mips-defs.h +2 -0
@@ -65,6 +65,8 @@#define CPU_LOONGSON2E (CPU_MIPS3 | INSN_LOONGSON2E)#define CPU_LOONGSON2F (CPU_MIPS3 | INSN_LOONGSON2F | ASE_LMMI) +#define CPU_MIPS64 (ISA_MIPS3) +/* MIPS Technologies "Release 1" */ #define CPU_MIPS32R1 (CPU_MIPS2 | ISA_MIPS_R1)#define CPU_MIPS64R1 (CPU_MIPS5 | CPU_MIPS32R1)
hw/mips/boston.c +1 -1
@@ -463,7 +463,7 @@ static void boston_mach_init(MachineState *machine)exit (1 ); } - is_64b =cpu_type_supports_isa (machine->cpu_type,ISA_MIPS3 ); + is_64b =cpu_type_supports_isa (machine->cpu_type,CPU_MIPS64 ); object_initialize_child(OBJECT(machine), "cps", &s->cps,
TYPE_MIPS_CPS);
object_property_set_str(OBJECT(&s->cps), "cpu-type", machine->cpu_type,---
But for the Boston case, it is simpler to add an inline function in cpu.h:
-- >8 --
target/mips/cpu.h +0 -0
@@ -1302,6 +1302,11 @@ static inline bool ase_mt_available(CPUMIPSState
*env)
return env->CP0_Config3 & (1 << CP0C3_MT);
}
+static inline bool cpu_type_is_64bit(const char *cpu_type) +{
+ return cpu_type_supports_isa(cpu_type, CPU_MIPS64);
+}
+
void cpu_set_exception_base(int vp_index, target_ulong address);
/* addr.c */
---
Note, I'd still use ISA_MIPS3 in this cpu_type_is_64bit().
Or I could add the ISA_MIPS_64 alias and call it a day...
Quoted 4 lines
r~
PATCH v2 3/12 target/mips/mips-defs: Use ISA_MIPS32 definition to check Release 1
In reply to Philippe Mathieu-DaudéUse the single ISA_MIPS32 definition to check if the Release 1 ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it as ISA_MIPS_R1 in few commits.
--- target/mips/mips-defs.h | 3 +-- target/mips/translate.c | 10 +++++----- 2 files changed, 6 insertions(+), 7 deletions(-)
target/mips/mips-defs.h +1 -2
@@ -24,7 +24,6 @@#define ISA_MIPS5 0x0000000000000010ULL#define ISA_MIPS32 0x0000000000000020ULL#define ISA_MIPS32R2 0x0000000000000040ULL -#define ISA_MIPS64 0x0000000000000080ULL#define ISA_MIPS64R2 0x0000000000000100ULL#define ISA_MIPS32R3 0x0000000000000200ULL#define ISA_MIPS64R3 0x0000000000000400ULL
@@ -78,7 +77,7 @@/* MIPS Technologies "Release 1" */ #define CPU_MIPS32 (CPU_MIPS2 | ISA_MIPS32) -#define CPU_MIPS64 (CPU_MIPS5 | CPU_MIPS32 | ISA_MIPS64) +#define CPU_MIPS64 (CPU_MIPS5 | CPU_MIPS32)/* MIPS Technologies "Release 2" */ #define CPU_MIPS32R2 (CPU_MIPS32 | ISA_MIPS32R2)
target/mips/translate.c +5 -5
@@ -8538,7 +8538,7 @@ static void gen_dmfc0(DisasContext *ctx, TCGv arg, int reg, int sel)const char *register_name ="invalid" ;if (sel !=0 ) { -check_insn (ctx,ISA_MIPS64 ); +check_insn (ctx,ISA_MIPS32 ); }switch (reg) {
@@ -9264,7 +9264,7 @@ static void gen_dmtc0(DisasContext *ctx, TCGv arg, int reg, int sel)const char *register_name ="invalid" ;if (sel !=0 ) { -check_insn (ctx,ISA_MIPS64 ); +check_insn (ctx,ISA_MIPS32 ); }if (tb_cflags (ctx->base.tb) &CF_USE_ICOUNT ) {
@@ -14502,12 +14502,12 @@ static int decode_mips16_opc(CPUMIPSState *env, DisasContext *ctx)break ;#if defined(TARGET_MIPS64 )case RR_RY_CNVT_ZEW : -check_insn (ctx,ISA_MIPS64 ); +check_insn (ctx,ISA_MIPS32 );check_mips_64 (ctx);tcg_gen_ext32u_tl (cpu_gpr[rx], cpu_gpr[rx]);break ;case RR_RY_CNVT_SEW : -check_insn (ctx,ISA_MIPS64 ); +check_insn (ctx,ISA_MIPS32 );check_mips_64 (ctx);tcg_gen_ext32s_tl (cpu_gpr[rx], cpu_gpr[rx]);break ;
@@ -27203,7 +27203,7 @@ static void decode_opc_special2_legacy(CPUMIPSState *env, DisasContext *ctx)#if defined(TARGET_MIPS64 )case OPC_DCLO :case OPC_DCLZ : -check_insn (ctx,ISA_MIPS64 ); +check_insn (ctx,ISA_MIPS32 );check_mips_64 (ctx);gen_cl (ctx, op1, rd, rs);break ;
Signature · 1 line
2.26.2
Re: [PATCH v2 03/12] target/mips/mips-defs: Use ISA_MIPS32 definition to check Release 1
Quoted 11 lines · Philippe Mathieu-Daudé
Use the single
ISA_MIPS32definition to check if the Release 1 ISA is supported, whether the CPU support 32/64-bit.For now we keep '32' in the definition name, we will rename it as
ISA_MIPS_R1in few commits.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 3 +-- target/mips/translate.c | 10 +++++----- 2 files changed, 6 insertions(+), 7 deletions(-)
r~
PATCH v2 4/12 target/mips/mips-defs: Use ISA_MIPS32R2 definition to check Release 2
In reply to Philippe Mathieu-DaudéUse the single ISA_MIPS32R2 definition to check if the Release 2 ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it as ISA_MIPS_R2 in few commits.
--- target/mips/mips-defs.h | 3 +-- linux-user/mips/cpu_loop.c | 1 - target/mips/translate.c | 4 ++-- 3 files changed, 3 insertions(+), 5 deletions(-)
target/mips/mips-defs.h +1 -2
@@ -24,7 +24,6 @@#define ISA_MIPS5 0x0000000000000010ULL#define ISA_MIPS32 0x0000000000000020ULL#define ISA_MIPS32R2 0x0000000000000040ULL -#define ISA_MIPS64R2 0x0000000000000100ULL#define ISA_MIPS32R3 0x0000000000000200ULL#define ISA_MIPS64R3 0x0000000000000400ULL#define ISA_MIPS32R5 0x0000000000000800ULL
@@ -81,7 +80,7 @@/* MIPS Technologies "Release 2" */ #define CPU_MIPS32R2 (CPU_MIPS32 | ISA_MIPS32R2) -#define CPU_MIPS64R2 (CPU_MIPS64 | CPU_MIPS32R2 | ISA_MIPS64R2) +#define CPU_MIPS64R2 (CPU_MIPS64 | ISA_MIPS32R2)/* MIPS Technologies "Release 3" */ #define CPU_MIPS32R3 (CPU_MIPS32R2 | ISA_MIPS32R3)
linux-user/mips/cpu_loop.c +0 -1
@@ -386,7 +386,6 @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) prog_req.fre &= interp_req.fre;bool cpu_has_mips_r2_r6 = env->insn_flags &ISA_MIPS32R2 || - env->insn_flags &ISA_MIPS64R2 || env->insn_flags &ISA_MIPS32R6 || env->insn_flags &ISA_MIPS64R6 ;
target/mips/translate.c +2 -2
@@ -28212,7 +28212,7 @@ static void decode_opc_special3(CPUMIPSState *env, DisasContext *ctx)case OPC_DINSM :case OPC_DINSU :case OPC_DINS : -check_insn (ctx,ISA_MIPS64R2 ); +check_insn (ctx,ISA_MIPS32R2 );check_mips_64 (ctx);gen_bitops (ctx, op1, rt, rs, sa, rd);break ;
@@ -28232,7 +28232,7 @@ static void decode_opc_special3(CPUMIPSState *env, DisasContext *ctx)decode_opc_special3_r6 (env, ctx);break ;default : -check_insn (ctx,ISA_MIPS64R2 ); +check_insn (ctx,ISA_MIPS32R2 );check_mips_64 (ctx); op2 =MASK_DBSHFL (ctx->opcode);gen_bshfl (ctx, op2, rt, rd);
Signature · 1 line
2.26.2
Re: [PATCH v2 04/12] target/mips/mips-defs: Use ISA_MIPS32R2 definition to check Release 2
Quoted 6 lines · Philippe Mathieu-Daudé
Use the single
ISA_MIPS32R2definition to check if the Release 2 ISA is supported, whether the CPU support 32/64-bit.For now we keep '32' in the definition name, we will rename it as
ISA_MIPS_R2in few commits.
Quoted 6 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 3 +-- linux-user/mips/cpu_loop.c | 1 - target/mips/translate.c | 4 ++-- 3 files changed, 3 insertions(+), 5 deletions(-)
r~
PATCH v2 5/12 target/mips/mips-defs: Use ISA_MIPS32R3 definition to check Release 3
In reply to Philippe Mathieu-DaudéUse the single ISA_MIPS32R3 definition to check if the Release 3 ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it as ISA_MIPS_R3 in few commits.
--- target/mips/mips-defs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
target/mips/mips-defs.h +1 -2
@@ -25,7 +25,6 @@#define ISA_MIPS32 0x0000000000000020ULL#define ISA_MIPS32R2 0x0000000000000040ULL#define ISA_MIPS32R3 0x0000000000000200ULL -#define ISA_MIPS64R3 0x0000000000000400ULL#define ISA_MIPS32R5 0x0000000000000800ULL#define ISA_MIPS64R5 0x0000000000001000ULL#define ISA_MIPS32R6 0x0000000000002000ULL
@@ -84,7 +83,7 @@/* MIPS Technologies "Release 3" */ #define CPU_MIPS32R3 (CPU_MIPS32R2 | ISA_MIPS32R3) -#define CPU_MIPS64R3 (CPU_MIPS64R2 | CPU_MIPS32R3 | ISA_MIPS64R3) +#define CPU_MIPS64R3 (CPU_MIPS64R2 | CPU_MIPS32R3)/* MIPS Technologies "Release 5" */ #define CPU_MIPS32R5 (CPU_MIPS32R3 | ISA_MIPS32R5)
Signature · 1 line
2.26.2
Re: [PATCH v2 05/12] target/mips/mips-defs: Use ISA_MIPS32R3 definition to check Release 3
Quoted 10 lines · Philippe Mathieu-Daudé
Use the single
ISA_MIPS32R3definition to check if the Release 3 ISA is supported, whether the CPU support 32/64-bit.For now we keep '32' in the definition name, we will rename it as
ISA_MIPS_R3in few commits.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
r~
PATCH v2 6/12 target/mips/mips-defs: Use ISA_MIPS32R5 definition to check Release 5
In reply to Philippe Mathieu-DaudéUse the single ISA_MIPS32R5 definition to check if the Release 5 ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it as ISA_MIPS_R5 in few commits.
--- target/mips/mips-defs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
target/mips/mips-defs.h +1 -2
@@ -26,7 +26,6 @@#define ISA_MIPS32R2 0x0000000000000040ULL#define ISA_MIPS32R3 0x0000000000000200ULL#define ISA_MIPS32R5 0x0000000000000800ULL -#define ISA_MIPS64R5 0x0000000000001000ULL#define ISA_MIPS32R6 0x0000000000002000ULL#define ISA_MIPS64R6 0x0000000000004000ULL#define ISA_NANOMIPS32 0x0000000000008000ULL
@@ -87,7 +86,7 @@/* MIPS Technologies "Release 5" */ #define CPU_MIPS32R5 (CPU_MIPS32R3 | ISA_MIPS32R5) -#define CPU_MIPS64R5 (CPU_MIPS64R3 | CPU_MIPS32R5 | ISA_MIPS64R5) +#define CPU_MIPS64R5 (CPU_MIPS64R3 | CPU_MIPS32R5)/* MIPS Technologies "Release 6" */ #define CPU_MIPS32R6 (CPU_MIPS32R5 | ISA_MIPS32R6)
Signature · 1 line
2.26.2
Re: [PATCH v2 06/12] target/mips/mips-defs: Use ISA_MIPS32R5 definition to check Release 5
Quoted 10 lines · Philippe Mathieu-Daudé
Use the single
ISA_MIPS32R5definition to check if the Release 5 ISA is supported, whether the CPU support 32/64-bit.For now we keep '32' in the definition name, we will rename it as
ISA_MIPS_R5in few commits.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
r~
PATCH v2 7/12 target/mips/mips-defs: Use ISA_MIPS32R6 definition to check Release 6
In reply to Philippe Mathieu-DaudéUse the single ISA_MIPS32R6 definition to check if the Release 6 ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it as ISA_MIPS_R6 in few commits.
--- target/mips/internal.h | 2 +- target/mips/mips-defs.h | 3 +-- linux-user/elfload.c | 2 +- linux-user/mips/cpu_loop.c | 3 +-- target/mips/tlb_helper.c | 6 +++--- target/mips/translate.c | 2 +- 6 files changed, 8 insertions(+), 10 deletions(-)
target/mips/internal.h +1 -1
@@ -308,7 +308,7 @@ static inline void compute_hflags(CPUMIPSState *env) }else if (((env->hflags &MIPS_HFLAG_KSU ) ==MIPS_HFLAG_UM ) && !(env->CP0_Status & (1 << CP0St_UX))) { env->hflags |=MIPS_HFLAG_AWRAP ; - }else if (env->insn_flags &ISA_MIPS64R6 ) { + }else if (env->insn_flags &ISA_MIPS32R6 ) {/* Address wrapping for Supervisor and Kernel is specified in R6 */ if ((((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_SM) && !(env->CP0_Status & (1 << CP0St_SX))) ||
target/mips/mips-defs.h +1 -2
@@ -27,7 +27,6 @@#define ISA_MIPS32R3 0x0000000000000200ULL#define ISA_MIPS32R5 0x0000000000000800ULL#define ISA_MIPS32R6 0x0000000000002000ULL -#define ISA_MIPS64R6 0x0000000000004000ULL#define ISA_NANOMIPS32 0x0000000000008000ULL/* * bits 24-39: MIPS ASEs
@@ -90,7 +89,7 @@/* MIPS Technologies "Release 6" */ #define CPU_MIPS32R6 (CPU_MIPS32R5 | ISA_MIPS32R6) -#define CPU_MIPS64R6 (CPU_MIPS64R5 | CPU_MIPS32R6 | ISA_MIPS64R6) +#define CPU_MIPS64R6 (CPU_MIPS64R5 | CPU_MIPS32R6)/* Wave Computing: "nanoMIPS" */ #define CPU_NANOMIPS32 (CPU_MIPS32R6 | ISA_NANOMIPS32)
linux-user/elfload.c +1 -1
@@ -997,7 +997,7 @@ static uint32_t get_elf_hwcap(void)#define GET_FEATURE (flag, hwcap) \ do { if (cpu->env.insn_flags & (flag)) { hwcaps |= hwcap; } } while (0) -GET_FEATURE (ISA_MIPS32R6 |ISA_MIPS64R6 ,HWCAP_MIPS_R6 ); +GET_FEATURE (ISA_MIPS32R6 ,HWCAP_MIPS_R6 );GET_FEATURE (ASE_MSA ,HWCAP_MIPS_MSA );#undef GET_FEATURE
linux-user/mips/cpu_loop.c +1 -2
@@ -386,8 +386,7 @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) prog_req.fre &= interp_req.fre;bool cpu_has_mips_r2_r6 = env->insn_flags &ISA_MIPS32R2 || - env->insn_flags &ISA_MIPS32R6 || - env->insn_flags &ISA_MIPS64R6 ; + env->insn_flags &ISA_MIPS32R6 ;if (prog_req.fre && !prog_req.frdefault && !prog_req.fr1) { env->CP0_Config5 |= (1 <<CP0C5_FRE );
target/mips/tlb_helper.c +3 -3
@@ -1025,7 +1025,7 @@ void mips_cpu_do_interrupt(CPUState *cs) enter_debug_mode:if (env->insn_flags &ISA_MIPS3 ) { env->hflags |=MIPS_HFLAG_64 ; -if (!(env->insn_flags &ISA_MIPS64R6 ) || +if (!(env->insn_flags &ISA_MIPS32R6 ) || env->CP0_Status & (1 << CP0St_KX)) { env->hflags &= ~MIPS_HFLAG_AWRAP ; }
@@ -1054,7 +1054,7 @@ void mips_cpu_do_interrupt(CPUState *cs) env->CP0_Status |= (1 << CP0St_ERL) | (1 << CP0St_BEV);if (env->insn_flags &ISA_MIPS3 ) { env->hflags |=MIPS_HFLAG_64 ; -if (!(env->insn_flags &ISA_MIPS64R6 ) || +if (!(env->insn_flags &ISA_MIPS32R6 ) || env->CP0_Status & (1 << CP0St_KX)) { env->hflags &= ~MIPS_HFLAG_AWRAP ; }
@@ -1240,7 +1240,7 @@ void mips_cpu_do_interrupt(CPUState *cs) env->CP0_Status |= (1 << CP0St_EXL);if (env->insn_flags &ISA_MIPS3 ) { env->hflags |=MIPS_HFLAG_64 ; -if (!(env->insn_flags &ISA_MIPS64R6 ) || +if (!(env->insn_flags &ISA_MIPS32R6 ) || env->CP0_Status & (1 << CP0St_KX)) { env->hflags &= ~MIPS_HFLAG_AWRAP ; }
target/mips/translate.c +1 -1
@@ -29078,7 +29078,7 @@ static void mips_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)#else ctx->mem_idx =hflags_mmu_index (ctx->hflags);#endif - ctx->default_tcg_memop_mask = (ctx->insn_flags & (ISA_MIPS32R6 |ISA_MIPS64R6 | + ctx->default_tcg_memop_mask = (ctx->insn_flags & (ISA_MIPS32R6 |INSN_LOONGSON3A )) ?MO_UNALN :MO_ALIGN ; LOG_DISAS("\ntb %p idx %d hflags %04x\n", ctx->base.tb, ctx->mem_idx,
Signature · 1 line
2.26.2
Re: [PATCH v2 07/12] target/mips/mips-defs: Use ISA_MIPS32R6 definition to check Release 6
Quoted 7 lines · Philippe Mathieu-Daudé
Use the single
ISA_MIPS32R6definition to check if the Release 6 ISA is supported, whether the CPU support 32/64-bit.For now we keep '32' in the definition name, we will rename it as
ISA_MIPS_R6in few commits.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 8 lines
--- target/mips/internal.h | 2 +- target/mips/mips-defs.h | 3 +-- linux-user/elfload.c | 2 +- linux-user/mips/cpu_loop.c | 3 +-- target/mips/tlb_helper.c | 6 +++--- target/mips/translate.c | 2 +- 6 files changed, 8 insertions(+), 10 deletions(-)
r~
PATCH v2 8/12 target/mips/mips-defs: Rename ISA_MIPS32 as ISA_MIPS_R1
In reply to Philippe Mathieu-DaudéThe MIPS ISA release '1' is common to 32/64-bit CPUs.
--- target/mips/internal.h | 2 +- target/mips/mips-defs.h | 4 +-- target/mips/translate.c | 54 ++++++++++++++++++++--------------------- 3 files changed, 30 insertions(+), 30 deletions(-)
target/mips/internal.h +1 -1
@@ -365,7 +365,7 @@ static inline void compute_hflags(CPUMIPSState *env)if (env->active_fpu.fcr0 & (1 <<FCR0_F64 )) { env->hflags |=MIPS_HFLAG_COP1X ; } - }else if (env->insn_flags &ISA_MIPS32 ) { + }else if (env->insn_flags &ISA_MIPS_R1 ) {if (env->hflags &MIPS_HFLAG_64 ) { env->hflags |=MIPS_HFLAG_COP1X ; }
target/mips/mips-defs.h +2 -2
@@ -22,7 +22,7 @@#define ISA_MIPS3 0x0000000000000004ULL/* 64-bit */ #define ISA_MIPS4 0x0000000000000008ULL#define ISA_MIPS5 0x0000000000000010ULL -#define ISA_MIPS32 0x0000000000000020ULL +#define ISA_MIPS_R1 0x0000000000000020ULL#define ISA_MIPS32R2 0x0000000000000040ULL#define ISA_MIPS32R3 0x0000000000000200ULL#define ISA_MIPS32R5 0x0000000000000800ULL
@@ -72,7 +72,7 @@#define CPU_LOONGSON2F (CPU_MIPS3 | INSN_LOONGSON2F | ASE_LMMI)/* MIPS Technologies "Release 1" */ -#define CPU_MIPS32 (CPU_MIPS2 | ISA_MIPS32) +#define CPU_MIPS32 (CPU_MIPS2 | ISA_MIPS_R1)#define CPU_MIPS64 (CPU_MIPS5 | CPU_MIPS32)/* MIPS Technologies "Release 2" */
target/mips/translate.c +27 -27
214 lines not on this page · raw message
Signature · 1 line
2.26.2
Re: [PATCH v2 08/12] target/mips/mips-defs: Rename ISA_MIPS32 as ISA_MIPS_R1
Quoted 8 lines · Philippe Mathieu-Daudé
The MIPS ISA release '1' is common to 32/64-bit CPUs.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/internal.h | 2 +- target/mips/mips-defs.h | 4 +-- target/mips/translate.c | 54 ++++++++++++++++++++--------------------- 3 files changed, 30 insertions(+), 30 deletions(-)
r~
PATCH v2 9/12 target/mips/mips-defs: Rename ISA_MIPS32R2 as ISA_MIPS_R2
In reply to Philippe Mathieu-DaudéThe MIPS ISA release 2 is common to 32/64-bit CPUs.
--- target/mips/internal.h | 2 +- target/mips/mips-defs.h | 6 +- linux-user/mips/cpu_loop.c | 2 +- target/mips/cp0_timer.c | 4 +- target/mips/cpu.c | 2 +- target/mips/translate.c | 138 ++++++++++++++++++------------------- 6 files changed, 77 insertions(+), 77 deletions(-)
target/mips/internal.h +1 -1
@@ -361,7 +361,7 @@ static inline void compute_hflags(CPUMIPSState *env) } } -if (env->insn_flags &ISA_MIPS32R2 ) { +if (env->insn_flags &ISA_MIPS_R2 ) {if (env->active_fpu.fcr0 & (1 <<FCR0_F64 )) { env->hflags |=MIPS_HFLAG_COP1X ; }
target/mips/mips-defs.h +3 -3
@@ -23,7 +23,7 @@#define ISA_MIPS4 0x0000000000000008ULL#define ISA_MIPS5 0x0000000000000010ULL#define ISA_MIPS_R1 0x0000000000000020ULL -#define ISA_MIPS32R2 0x0000000000000040ULL +#define ISA_MIPS_R2 0x0000000000000040ULL#define ISA_MIPS32R3 0x0000000000000200ULL#define ISA_MIPS32R5 0x0000000000000800ULL#define ISA_MIPS32R6 0x0000000000002000ULL
@@ -76,8 +76,8 @@#define CPU_MIPS64 (CPU_MIPS5 | CPU_MIPS32)/* MIPS Technologies "Release 2" */ -#define CPU_MIPS32R2 (CPU_MIPS32 | ISA_MIPS32R2) -#define CPU_MIPS64R2 (CPU_MIPS64 | ISA_MIPS32R2) +#define CPU_MIPS32R2 (CPU_MIPS32 | ISA_MIPS_R2) +#define CPU_MIPS64R2 (CPU_MIPS64 | ISA_MIPS_R2)/* MIPS Technologies "Release 3" */ #define CPU_MIPS32R3 (CPU_MIPS32R2 | ISA_MIPS32R3)
linux-user/mips/cpu_loop.c +1 -1
@@ -385,7 +385,7 @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) prog_req.frdefault &= interp_req.frdefault; prog_req.fre &= interp_req.fre; -bool cpu_has_mips_r2_r6 = env->insn_flags &ISA_MIPS32R2 || +bool cpu_has_mips_r2_r6 = env->insn_flags &ISA_MIPS_R2 || env->insn_flags &ISA_MIPS32R6 ;if (prog_req.fre && !prog_req.frdefault && !prog_req.fr1) {
target/mips/cp0_timer.c +2 -2
@@ -44,7 +44,7 @@ static void cpu_mips_timer_update(CPUMIPSState *env)static void cpu_mips_timer_expire (CPUMIPSState *env) {cpu_mips_timer_update (env); -if (env->insn_flags &ISA_MIPS32R2 ) { +if (env->insn_flags &ISA_MIPS_R2 ) { env->CP0_Cause |=1 << CP0Ca_TI; }qemu_irq_raise (env->irq[(env->CP0_IntCtl >> CP0IntCtl_IPTI) &0x7 ]);
@@ -93,7 +93,7 @@ void cpu_mips_store_compare(CPUMIPSState *env, uint32_t value)if (!(env->CP0_Cause & (1 << CP0Ca_DC))) {cpu_mips_timer_update (env); } -if (env->insn_flags &ISA_MIPS32R2 ) { +if (env->insn_flags &ISA_MIPS_R2 ) { env->CP0_Cause &= ~(1 << CP0Ca_TI); }qemu_irq_lower (env->irq[(env->CP0_IntCtl >> CP0IntCtl_IPTI) &0x7 ]);
target/mips/cpu.c +1 -1
@@ -111,7 +111,7 @@ void cpu_mips_store_cause(CPUMIPSState *env, target_ulong val)uint32_t old = env->CP0_Cause;int i; -if (env->insn_flags &ISA_MIPS32R2 ) { +if (env->insn_flags &ISA_MIPS_R2 ) { mask |=1 << CP0Ca_DC; }if (env->insn_flags &ISA_MIPS32R6 ) {
target/mips/translate.c +69 -69
497 lines not on this page · raw message
Signature · 1 line
2.26.2
Re: [PATCH v2 09/12] target/mips/mips-defs: Rename ISA_MIPS32R2 as ISA_MIPS_R2
Quoted 11 lines · Philippe Mathieu-Daudé
The MIPS ISA release 2 is common to 32/64-bit CPUs.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/internal.h | 2 +- target/mips/mips-defs.h | 6 +- linux-user/mips/cpu_loop.c | 2 +- target/mips/cp0_timer.c | 4 +- target/mips/cpu.c | 2 +- target/mips/translate.c | 138 ++++++++++++++++++------------------- 6 files changed, 77 insertions(+), 77 deletions(-)
r~
PATCH v2 10/12 target/mips/mips-defs: Rename ISA_MIPS32R3 as ISA_MIPS_R3
In reply to Philippe Mathieu-DaudéThe MIPS ISA release 3 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
--- target/mips/mips-defs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
target/mips/mips-defs.h +2 -2
@@ -24,7 +24,7 @@#define ISA_MIPS5 0x0000000000000010ULL#define ISA_MIPS_R1 0x0000000000000020ULL#define ISA_MIPS_R2 0x0000000000000040ULL -#define ISA_MIPS32R3 0x0000000000000200ULL +#define ISA_MIPS_R3 0x0000000000000080ULL#define ISA_MIPS32R5 0x0000000000000800ULL#define ISA_MIPS32R6 0x0000000000002000ULL#define ISA_NANOMIPS32 0x0000000000008000ULL
@@ -80,7 +80,7 @@#define CPU_MIPS64R2 (CPU_MIPS64 | ISA_MIPS_R2)/* MIPS Technologies "Release 3" */ -#define CPU_MIPS32R3 (CPU_MIPS32R2 | ISA_MIPS32R3) +#define CPU_MIPS32R3 (CPU_MIPS32R2 | ISA_MIPS_R3)#define CPU_MIPS64R3 (CPU_MIPS64R2 | CPU_MIPS32R3)/* MIPS Technologies "Release 5" */
Signature · 1 line
2.26.2
Re: [PATCH v2 10/12] target/mips/mips-defs: Rename ISA_MIPS32R3 as ISA_MIPS_R3
Quoted 9 lines · Philippe Mathieu-Daudé
The MIPS ISA release 3 is common to 32/64-bit CPUs.
To avoid holes in the
insn_flagstype, update the
definition with the next available bit.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
r~
PATCH v2 11/12 target/mips/mips-defs: Rename ISA_MIPS32R5 as ISA_MIPS_R5
In reply to Philippe Mathieu-DaudéThe MIPS ISA release 5 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
--- target/mips/mips-defs.h | 4 ++-- target/mips/translate.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
target/mips/mips-defs.h +2 -2
@@ -25,7 +25,7 @@#define ISA_MIPS_R1 0x0000000000000020ULL#define ISA_MIPS_R2 0x0000000000000040ULL#define ISA_MIPS_R3 0x0000000000000080ULL -#define ISA_MIPS32R5 0x0000000000000800ULL +#define ISA_MIPS_R5 0x0000000000000100ULL#define ISA_MIPS32R6 0x0000000000002000ULL#define ISA_NANOMIPS32 0x0000000000008000ULL/*
@@ -84,7 +84,7 @@#define CPU_MIPS64R3 (CPU_MIPS64R2 | CPU_MIPS32R3)/* MIPS Technologies "Release 5" */ -#define CPU_MIPS32R5 (CPU_MIPS32R3 | ISA_MIPS32R5) +#define CPU_MIPS32R5 (CPU_MIPS32R3 | ISA_MIPS_R5)#define CPU_MIPS64R5 (CPU_MIPS64R3 | CPU_MIPS32R5)/* MIPS Technologies "Release 6" */
target/mips/translate.c +1 -1
@@ -10588,7 +10588,7 @@ static void gen_cp0(CPUMIPSState *env, DisasContext *ctx, uint32_t opc,if (ctx->opcode & (1 << bit_shift)) {/* OPC_ERETNC */ opn ="eretnc" ; -check_insn (ctx,ISA_MIPS32R5 ); +check_insn (ctx,ISA_MIPS_R5 );gen_helper_eretnc (cpu_env); }else {/* OPC_ERET */
Signature · 1 line
2.26.2
Re: [PATCH v2 11/12] target/mips/mips-defs: Rename ISA_MIPS32R5 as ISA_MIPS_R5
Quoted 10 lines · Philippe Mathieu-Daudé
The MIPS ISA release 5 is common to 32/64-bit CPUs.
To avoid holes in the
insn_flagstype, update the
definition with the next available bit.Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- target/mips/mips-defs.h | 4 ++-- target/mips/translate.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
r~
PATCH v2 12/12 target/mips/mips-defs: Rename ISA_MIPS32R6 as ISA_MIPS_R6
In reply to Philippe Mathieu-DaudéThe MIPS ISA release 6 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
--- target/mips/internal.h | 4 +- target/mips/mips-defs.h | 4 +- linux-user/elfload.c | 2 +- linux-user/mips/cpu_loop.c | 2 +- target/mips/cp0_helper.c | 18 +- target/mips/cpu.c | 10 +- target/mips/fpu_helper.c | 4 +- target/mips/tlb_helper.c | 6 +- target/mips/translate.c | 426 ++++++++++++++++++------------------- 9 files changed, 238 insertions(+), 238 deletions(-)
target/mips/internal.h +2 -2
@@ -308,7 +308,7 @@ static inline void compute_hflags(CPUMIPSState *env) }else if (((env->hflags &MIPS_HFLAG_KSU ) ==MIPS_HFLAG_UM ) && !(env->CP0_Status & (1 << CP0St_UX))) { env->hflags |=MIPS_HFLAG_AWRAP ; - }else if (env->insn_flags &ISA_MIPS32R6 ) { + }else if (env->insn_flags &ISA_MIPS_R6 ) {/* Address wrapping for Supervisor and Kernel is specified in R6 */ if ((((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_SM) && !(env->CP0_Status & (1 << CP0St_SX))) ||
@@ -319,7 +319,7 @@ static inline void compute_hflags(CPUMIPSState *env) }#endif if (((env->CP0_Status & (1 << CP0St_CU0)) && - !(env->insn_flags &ISA_MIPS32R6 )) || + !(env->insn_flags &ISA_MIPS_R6 )) || !(env->hflags &MIPS_HFLAG_KSU )) { env->hflags |=MIPS_HFLAG_CP0 ; }
target/mips/mips-defs.h +2 -2
@@ -26,7 +26,7 @@#define ISA_MIPS_R2 0x0000000000000040ULL#define ISA_MIPS_R3 0x0000000000000080ULL#define ISA_MIPS_R5 0x0000000000000100ULL -#define ISA_MIPS32R6 0x0000000000002000ULL +#define ISA_MIPS_R6 0x0000000000000200ULL#define ISA_NANOMIPS32 0x0000000000008000ULL/* * bits 24-39: MIPS ASEs
@@ -88,7 +88,7 @@#define CPU_MIPS64R5 (CPU_MIPS64R3 | CPU_MIPS32R5)/* MIPS Technologies "Release 6" */ -#define CPU_MIPS32R6 (CPU_MIPS32R5 | ISA_MIPS32R6) +#define CPU_MIPS32R6 (CPU_MIPS32R5 | ISA_MIPS_R6)#define CPU_MIPS64R6 (CPU_MIPS64R5 | CPU_MIPS32R6)/* Wave Computing: "nanoMIPS" */
linux-user/elfload.c +1 -1
@@ -997,7 +997,7 @@ static uint32_t get_elf_hwcap(void)#define GET_FEATURE (flag, hwcap) \ do { if (cpu->env.insn_flags & (flag)) { hwcaps |= hwcap; } } while (0) -GET_FEATURE (ISA_MIPS32R6 ,HWCAP_MIPS_R6 ); +GET_FEATURE (ISA_MIPS_R6 ,HWCAP_MIPS_R6 );GET_FEATURE (ASE_MSA ,HWCAP_MIPS_MSA );#undef GET_FEATURE
linux-user/mips/cpu_loop.c +1 -1
@@ -386,7 +386,7 @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs) prog_req.fre &= interp_req.fre;bool cpu_has_mips_r2_r6 = env->insn_flags &ISA_MIPS_R2 || - env->insn_flags &ISA_MIPS32R6 ; + env->insn_flags &ISA_MIPS_R6 ;if (prog_req.fre && !prog_req.frdefault && !prog_req.fr1) { env->CP0_Config5 |= (1 <<CP0C5_FRE );
target/mips/cp0_helper.c +9 -9
@@ -527,7 +527,7 @@ void helper_mtc0_index(CPUMIPSState *env, target_ulong arg1)uint32_t index_p = env->CP0_Index &0x80000000 ;uint32_t tlb_index = arg1 &0x7fffffff ;if (tlb_index < env->tlb->nb_tlb) { -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) { index_p |= arg1 &0x80000000 ; } env->CP0_Index = index_p | tlb_index;
@@ -960,7 +960,7 @@ void helper_mtc0_pwfield(CPUMIPSState *env, target_ulong arg1)uint32_t old_ptei = (env->CP0_PWField >>CP0PF_PTEI ) &0x3FULL ;uint32_t new_ptei = (arg1 >>CP0PF_PTEI ) &0x3FULL ; -if ((env->insn_flags &ISA_MIPS32R6 )) { +if ((env->insn_flags &ISA_MIPS_R6 )) {if (((arg1 >>CP0PF_BDI ) &0x3FULL ) <12 ) { mask &= ~(0x3FULL <<CP0PF_BDI ); }
@@ -980,7 +980,7 @@ void helper_mtc0_pwfield(CPUMIPSState *env, target_ulong arg1) env->CP0_PWField = arg1 & mask;if ((new_ptei >=32 ) || - ((env->insn_flags &ISA_MIPS32R6 ) && + ((env->insn_flags &ISA_MIPS_R6 ) && (new_ptei ==0 || new_ptei ==1 ))) { env->CP0_PWField = (env->CP0_PWField & ~0x3FULL ) | (old_ptei <<CP0PF_PTEI );
@@ -990,7 +990,7 @@ void helper_mtc0_pwfield(CPUMIPSState *env, target_ulong arg1)uint32_t old_ptew = (env->CP0_PWField >>CP0PF_PTEW ) &0x3F ;uint32_t new_ptew = (arg1 >>CP0PF_PTEW ) &0x3F ; -if ((env->insn_flags &ISA_MIPS32R6 )) { +if ((env->insn_flags &ISA_MIPS_R6 )) {if (((arg1 >>CP0PF_GDW ) &0x3F ) <12 ) { mask &= ~(0x3F <<CP0PF_GDW ); }
@@ -1007,7 +1007,7 @@ void helper_mtc0_pwfield(CPUMIPSState *env, target_ulong arg1) env->CP0_PWField = arg1 & mask;if ((new_ptew >=32 ) || - ((env->insn_flags &ISA_MIPS32R6 ) && + ((env->insn_flags &ISA_MIPS_R6 ) && (new_ptew ==0 || new_ptew ==1 ))) { env->CP0_PWField = (env->CP0_PWField & ~0x3F ) | (old_ptew <<CP0PF_PTEW );
@@ -1026,7 +1026,7 @@ void helper_mtc0_pwsize(CPUMIPSState *env, target_ulong arg1)void helper_mtc0_wired (CPUMIPSState *env,target_ulong arg1) { -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) {if (arg1 < env->tlb->nb_tlb) { env->CP0_Wired = arg1; }
@@ -1075,10 +1075,10 @@ void helper_mtc0_hwrena(CPUMIPSState *env, target_ulong arg1)uint32_t mask =0x0000000F ;if ((env->CP0_Config1 & (1 <<CP0C1_PC )) && - (env->insn_flags &ISA_MIPS32R6 )) { + (env->insn_flags &ISA_MIPS_R6 )) { mask |= (1 <<4 ); } -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) { mask |= (1 <<5 ); }if (env->CP0_Config3 & (1 <<CP0C3_ULRI )) {
@@ -1149,7 +1149,7 @@ void helper_mtc0_entryhi(CPUMIPSState *env, target_ulong arg1)/* 1k pages not implemented */ #if defined(TARGET_MIPS64 ) -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) {int entryhi_r =extract64 (arg1,62 ,2 );int config0_at =extract32 (env->CP0_Config0,13 ,2 );bool no_supervisor = (env->CP0_Status_rw_bitmask &0x8 ) ==0 ;
target/mips/cpu.c +5 -5
@@ -77,7 +77,7 @@ void cpu_mips_store_status(CPUMIPSState *env, target_ulong val)uint32_t mask = env->CP0_Status_rw_bitmask;target_ulong old = env->CP0_Status; -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) {bool has_supervisor =extract32 (mask, CP0St_KSU,2 ) ==0x3 ;#if defined(TARGET_MIPS64 )uint32_t ksux = (1 << CP0St_KX) & val;
@@ -114,7 +114,7 @@ void cpu_mips_store_cause(CPUMIPSState *env, target_ulong val)if (env->insn_flags &ISA_MIPS_R2 ) { mask |=1 << CP0Ca_DC; } -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) { mask &= ~((1 << CP0Ca_WP) & val); }
@@ -281,7 +281,7 @@ static bool mips_cpu_has_work(CPUState *cs)if ((cs->interrupt_request &CPU_INTERRUPT_HARD ) &&cpu_mips_hw_interrupts_pending (env)) {if (cpu_mips_hw_interrupts_enabled (env) || - (env->insn_flags &ISA_MIPS32R6 )) { + (env->insn_flags &ISA_MIPS_R6 )) { has_work = true; } }
@@ -503,13 +503,13 @@ static void mips_cpu_reset(DeviceState *dev)/* XKPhys (note, SegCtl2.XR = 0, so XAM won't be used) */ env->CP0_SegCtl1 |= (CP0SC_AM_UK <<CP0SC1_XAM );#endif /* !CONFIG_USER_ONLY */ -if ((env->insn_flags &ISA_MIPS32R6 ) && +if ((env->insn_flags &ISA_MIPS_R6 ) && (env->active_fpu.fcr0 & (1 <<FCR0_F64 ))) {/* Status.FR = 0 mode in 64-bit FPU not allowed in R6 */ env->CP0_Status |= (1 << CP0St_FR); } -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) {/* PTW = 1 */ env->CP0_PWSize =0x40 ;/* GDI = 12 */
target/mips/fpu_helper.c +2 -2
@@ -146,7 +146,7 @@ void helper_ctc1(CPUMIPSState *env, target_ulong arg1, uint32_t fs, uint32_t rt) }break ;case 25 : -if ((env->insn_flags &ISA_MIPS32R6 ) || (arg1 &0xffffff00 )) { +if ((env->insn_flags &ISA_MIPS_R6 ) || (arg1 &0xffffff00 )) {return ; } env->active_fpu.fcr31 = (env->active_fpu.fcr31 & 0x017fffff) |
@@ -173,7 +173,7 @@ void helper_ctc1(CPUMIPSState *env, target_ulong arg1, uint32_t fs, uint32_t rt) (env->active_fpu.fcr31 & ~(env->active_fpu.fcr31_rw_bitmask));break ;default : -if (env->insn_flags &ISA_MIPS32R6 ) { +if (env->insn_flags &ISA_MIPS_R6 ) {do_raise_exception (env,EXCP_RI ,GETPC ()); }return ;
target/mips/tlb_helper.c +3 -3
@@ -1025,7 +1025,7 @@ void mips_cpu_do_interrupt(CPUState *cs) enter_debug_mode:if (env->insn_flags &ISA_MIPS3 ) { env->hflags |=MIPS_HFLAG_64 ; -if (!(env->insn_flags &ISA_MIPS32R6 ) || +if (!(env->insn_flags &ISA_MIPS_R6 ) || env->CP0_Status & (1 << CP0St_KX)) { env->hflags &= ~MIPS_HFLAG_AWRAP ; }
@@ -1054,7 +1054,7 @@ void mips_cpu_do_interrupt(CPUState *cs) env->CP0_Status |= (1 << CP0St_ERL) | (1 << CP0St_BEV);if (env->insn_flags &ISA_MIPS3 ) { env->hflags |=MIPS_HFLAG_64 ; -if (!(env->insn_flags &ISA_MIPS32R6 ) || +if (!(env->insn_flags &ISA_MIPS_R6 ) || env->CP0_Status & (1 << CP0St_KX)) { env->hflags &= ~MIPS_HFLAG_AWRAP ; }
@@ -1240,7 +1240,7 @@ void mips_cpu_do_interrupt(CPUState *cs) env->CP0_Status |= (1 << CP0St_EXL);if (env->insn_flags &ISA_MIPS3 ) { env->hflags |=MIPS_HFLAG_64 ; -if (!(env->insn_flags &ISA_MIPS32R6 ) || +if (!(env->insn_flags &ISA_MIPS_R6 ) || env->CP0_Status & (1 << CP0St_KX)) { env->hflags &= ~MIPS_HFLAG_AWRAP ; }
target/mips/translate.c +213 -213
1,511 lines not on this page · raw message
Signature · 1 line
2.26.2
Re: [PATCH v2 12/12] target/mips/mips-defs: Rename ISA_MIPS32R6 as ISA_MIPS_R6
Quoted 6 lines · Philippe Mathieu-Daudé
The MIPS ISA release 6 is common to 32/64-bit CPUs.
To avoid holes in the
insn_flagstype, update the
definition with the next available bit.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Quoted 11 lines
--- target/mips/internal.h | 4 +- target/mips/mips-defs.h | 4 +- linux-user/elfload.c | 2 +- linux-user/mips/cpu_loop.c | 2 +- target/mips/cp0_helper.c | 18 +- target/mips/cpu.c | 10 +- target/mips/fpu_helper.c | 4 +- target/mips/tlb_helper.c | 6 +- target/mips/translate.c | 426 ++++++++++++++++++------------------- 9 files changed, 238 insertions(+), 238 deletions(-)
r~