net: ftgmac100: Change the order of getting MAC address
Subsystems (2)
cover net: ftgmac100: Change the order of getting MAC address
Dear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.
Hongwei Zhang (1):
net: ftgmac100: Change the order of getting MAC address
drivers/net/ethernet/faraday/ftgmac100.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/1 net: ftgmac100: Change the order of getting MAC address
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
--- drivers/net/ethernet/faraday/ftgmac100.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
drivers/net/ethernet/faraday/ftgmac100.c +13 -9
@@ -184,14 +184,7 @@ static void ftgmac100_initial_mac(struct ftgmac100 *priv)unsigned int l;void *addr; - addr =device_get_mac_address (priv->dev, mac,ETH_ALEN ); -if (addr) { -ether_addr_copy (priv->netdev->dev_addr, mac); -dev_info (priv->dev,"Read MAC address %pM from device tree\n" , - mac); -return ; - } - +/* Read from Chip if not from chip */ m =ioread32 (priv->base +FTGMAC100_OFFSET_MAC_MADR ); l =ioread32 (priv->base +FTGMAC100_OFFSET_MAC_LADR );
@@ -205,7 +198,18 @@ static void ftgmac100_initial_mac(struct ftgmac100 *priv)if (is_valid_ether_addr (mac)) {ether_addr_copy (priv->netdev->dev_addr, mac);dev_info (priv->dev,"Read MAC address %pM from chip\n" , mac); - }else { +return ; + } + +/* Read from Chip if not from device tree */ + addr =device_get_mac_address (priv->dev, mac,ETH_ALEN ); +if (addr) { +ether_addr_copy (priv->netdev->dev_addr, mac); +dev_info (priv->dev,"Read MAC address %pM from device tree\n" , + mac); +return ; + } +else {eth_hw_addr_random (priv->netdev);dev_info (priv->dev,"Generated random MAC address %pM\n" , priv->netdev->dev_addr);
Signature · 1 line
2.17.1
Am 21.12.2020 um 21:51 schrieb Hongwei Zhang:
Quoted 3 lines
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
This commit message leaves a number of questions. It seems the change isn't related at all to the change that it's supposed to fix.
- What is the issue that you're trying to fix?
- And what is wrong with the original change?
Quoted 13 lines
Fixes 35c54922dc97 ("ARM: dts: tacoma: Add reserved memory for ramoops")Signed-off-by Hongwei Zhang <[email protected]>--- drivers/net/ethernet/faraday/ftgmac100.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)drivers/net/ethernet/faraday/ftgmac100.c +0
-0@@ -184,14 +184,7 @@ static void ftgmac100_initial_mac(struct ftgmac100 *priv)unsigned int l;void *addr;
drivers/net/ethernet/faraday/ftgmac100.c static void ftgmac100_initial_mac(struct ftgmac100 *priv) · line 187
Quoted 10 lines
drivers/net/ethernet/faraday/ftgmac100.c +1
-8- addr =device_get_mac_address (priv->dev, mac,ETH_ALEN ); -if (addr) { -ether_addr_copy (priv->netdev->dev_addr, mac); -dev_info (priv->dev,"Read MAC address %pM from device tree\n" , - mac); -return ; - } - +/* Read from Chip if not from chip */
?!?
drivers/net/ethernet/faraday/ftgmac100.c static void ftgmac100_initial_mac(struct ftgmac100 *priv) · line 204
Quoted 12 lines
drivers/net/ethernet/faraday/ftgmac100.c +4
-1m =ioread32 (priv->base +FTGMAC100_OFFSET_MAC_MADR ); l =ioread32 (priv->base +FTGMAC100_OFFSET_MAC_LADR );@@ -205,7 +198,18 @@ static void ftgmac100_initial_mac(struct ftgmac100 *priv)if (is_valid_ether_addr (mac)) {ether_addr_copy (priv->netdev->dev_addr, mac);dev_info (priv->dev,"Read MAC address %pM from chip\n" , mac); - }else { +return ; + } + +/* Read from Chip if not from device tree */
Isn't this how it works now?
Quoted 12 lines
drivers/net/ethernet/faraday/ftgmac100.c +8
-0+ addr =device_get_mac_address (priv->dev, mac,ETH_ALEN ); +if (addr) { +ether_addr_copy (priv->netdev->dev_addr, mac); +dev_info (priv->dev,"Read MAC address %pM from device tree\n" , + mac); +return ; + } +else {eth_hw_addr_random (priv->netdev);dev_info (priv->dev,"Generated random MAC address %pM\n" , priv->netdev->dev_addr);
v2 cover net: ftgmac100: Change the order of getting MAC address
In reply to Hongwei ZhangDear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.
Thanks,
--Hongwei
Changelog:
v2:
- Corrected comments in the patch
v1: https://patchwork.ozlabs.org/project/linux-aspeed/list/?series=221576
- Initial submission
Hongwei Zhang (1):
net: ftgmac100: Change the order of getting MAC address
drivers/net/ethernet/faraday/ftgmac100.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/2 net: ftgmac100: Change the order of getting MAC address
In reply to Hongwei ZhangChange the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
--- drivers/net/ethernet/faraday/ftgmac100.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
drivers/net/ethernet/faraday/ftgmac100.c +13 -9
@@ -184,14 +184,7 @@ static void ftgmac100_initial_mac(struct ftgmac100 *priv)unsigned int l;void *addr; - addr =device_get_mac_address (priv->dev, mac,ETH_ALEN ); -if (addr) { -ether_addr_copy (priv->netdev->dev_addr, mac); -dev_info (priv->dev,"Read MAC address %pM from device tree\n" , - mac); -return ; - } - +/* Try to read MAC from chip first */ m =ioread32 (priv->base +FTGMAC100_OFFSET_MAC_MADR ); l =ioread32 (priv->base +FTGMAC100_OFFSET_MAC_LADR );
@@ -205,7 +198,18 @@ static void ftgmac100_initial_mac(struct ftgmac100 *priv)if (is_valid_ether_addr (mac)) {ether_addr_copy (priv->netdev->dev_addr, mac);dev_info (priv->dev,"Read MAC address %pM from chip\n" , mac); - }else { +return ; + } + +/* Get MAC from device tree if it cannot be read from the chip */ + addr =device_get_mac_address (priv->dev, mac,ETH_ALEN ); +if (addr) { +ether_addr_copy (priv->netdev->dev_addr, mac); +dev_info (priv->dev,"Read MAC address %pM from device tree\n" , + mac); +return ; + } +else {eth_hw_addr_random (priv->netdev);dev_info (priv->dev,"Generated random MAC address %pM\n" , priv->netdev->dev_addr);
Signature · 1 line
2.17.1
PATCH v2 2/2 net: ftgmac100: Change the order of getting MAC address
In reply to Hongwei ZhangDear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.
Hi Heiner,
Quoted 10 lines
From: Heiner Kallweit <[email protected]>
Sent: Monday, December 21, 2020 4:37 PMQuoted 3 lines
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
This commit message leaves a number of questions. It seems the change isn't related at all to the change that it's supposed to fix.
- What is the issue that you're trying to fix?
- And what is wrong with the original change?
There is no bug or something wrong with the original code. This patch is for improving the code. We thought if the native MAC address is available, then it's preferred over MAC address from dts (assuming both sources are available).
One possible scenario, a MAC address is set in dts and the BMC image is compiled and loaded into more than one platform, then the platforms will have network issue due to the same MAC address they read.
Thanks for your review, I've update the patch to fix the comments.
Quoted 7 lines
Quoted 7 lines
Fixes 35c54922dc97 ("ARM: dts: tacoma: Add reserved memory forramoops")
Signed-off-by Hongwei Zhang <[email protected]>--- drivers/net/ethernet/faraday/ftgmac100.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)
--Hongwei
Quoted 20 lines · Hongwei Zhang
Dear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.Hi Heiner,
Quoted 10 lines
From: Heiner Kallweit <[email protected]>
Sent: Monday, December 21, 2020 4:37 PMQuoted 3 lines
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
This commit message leaves a number of questions. It seems the change isn't related at all to the change that it's supposed to fix.
- What is the issue that you're trying to fix?
- And what is wrong with the original change?
Quoted 8 lines
There is no bug or something wrong with the original code. This patch is for improving the code. We thought if the native MAC address is available, then it's preferred over MAC address from dts (assuming both sources are available).
One possible scenario, a MAC address is set in dts and the BMC image is compiled and loaded into more than one platform, then the platforms will have network issue due to the same MAC address they read.
Typically the DTS MAC address is overwritten by the boot loader, e.g. uboot. And the boot loader can read it from chip registers. There are more drivers trying to read the MAC address from DTS first. Eventually, I think, the code here will read the same MAC address from chip registers as uboot did before.
Quoted 11 lines
Thanks for your review, I've update the patch to fix the comments.
Quoted 7 lines
Quoted 7 lines
Fixes 35c54922dc97 ("ARM: dts: tacoma: Add reserved memory forramoops")
Signed-off-by Hongwei Zhang <[email protected]>--- drivers/net/ethernet/faraday/ftgmac100.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)--Hongwei
Quoted 30 lines · Heiner Kallweit
Quoted 20 lines · Hongwei Zhang
Dear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.Hi Heiner,
Quoted 10 lines
From: Heiner Kallweit <[email protected]>
Sent: Monday, December 21, 2020 4:37 PMQuoted 3 lines
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
This commit message leaves a number of questions. It seems the change isn't related at all to the change that it's supposed to fix.
- What is the issue that you're trying to fix?
- And what is wrong with the original change?Quoted 8 lines
There is no bug or something wrong with the original code. This patch is for improving the code. We thought if the native MAC address is available, then it's preferred over MAC address from dts (assuming both sources are available).
One possible scenario, a MAC address is set in dts and the BMC image is compiled and loaded into more than one platform, then the platforms will have network issue due to the same MAC address they read.
Quoted 4 lines
Typically the DTS MAC address is overwritten by the boot loader, e.g. uboot. And the boot loader can read it from chip registers. There are more drivers trying to read the MAC address from DTS first. Eventually, I think, the code here will read the same MAC address from chip registers as uboot did before.
Do we need to worry about, the chip contains random junk, which passes the validitiy test? Before this patch the value from DT would be used, and the random junk is ignored. Is this change possibly going to cause a regression?
Andrew
Jakub Kicinski
maintainerQuoted 35 lines · On Tue, 22 Dec 2020 22:00:34 +0100 Andrew Lunn wrote:
Quoted 29 lines · Heiner Kallweit
Quoted 19 lines · Hongwei Zhang
Dear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.Hi Heiner,
Quoted 10 lines
From: Heiner Kallweit <[email protected]>
Sent: Monday, December 21, 2020 4:37 PMQuoted 3 lines
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
This commit message leaves a number of questions. It seems the change isn't related at all to the change that it's supposed to fix.
- What is the issue that you're trying to fix?
- And what is wrong with the original change?Quoted 8 lines
There is no bug or something wrong with the original code. This patch is for improving the code. We thought if the native MAC address is available, then it's preferred over MAC address from dts (assuming both sources are available).
One possible scenario, a MAC address is set in dts and the BMC image is compiled and loaded into more than one platform, then the platforms will have network issue due to the same MAC address they read.
Quoted 4 lines
Typically the DTS MAC address is overwritten by the boot loader, e.g. uboot. And the boot loader can read it from chip registers. There are more drivers trying to read the MAC address from DTS first. Eventually, I think, the code here will read the same MAC address from chip registers as uboot did before.
Quoted 4 lines
Do we need to worry about, the chip contains random junk, which passes the validitiy test? Before this patch the value from DT would be used, and the random junk is ignored. Is this change possibly going to cause a regression?
Hongwei, please address Andrew's questions.
Once the discussion is over please repost the patches as git-format-patch would generate them. The patch 2/2 of this series is not really a patch, which confuses all patch handling systems.
It also appears that 35c54922dc97 ("ARM: dts: tacoma: Add reserved memory for ramoops") does not exist upstream.
PATCH 1/1 net: ftgmac100: Change the order of getting MAC address
In reply to Hongwei ZhangQuoted 39 lines
From: Jakub Kicinski <[email protected]>
Sent: Monday, December 28, 2020 5:01 PMQuoted 34 lines · On Tue, 22 Dec 2020 22:00:34 +0100 Andrew Lunn wrote:
Quoted 33 lines · Heiner Kallweit
Quoted 19 lines · Hongwei Zhang
Dear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.Hi Heiner,
Quoted 10 lines
From: Heiner Kallweit <[email protected]> Sent: Monday, December 21, 2020 4:37 PMQuoted 3 lines
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
This commit message leaves a number of questions. It seems the change isn't related at all to the change that it's supposed to fix.
- What is the issue that you're trying to fix?
- And what is wrong with the original change?Quoted 8 lines
There is no bug or something wrong with the original code. This patch is for improving the code. We thought if the native MAC address is available, then it's preferred over MAC address from dts (assuming both sources are available).
One possible scenario, a MAC address is set in dts and the BMC image is compiled and loaded into more than one platform, then the platforms will have network issue due to the same MAC address they read.
Typically the DTS MAC address is overwritten by the boot loader, e.g. uboot. And the boot loader can read it from chip registers. There are more drivers trying to read the MAC address from DTS first. Eventually, I think, the code here will read the same MAC address from chip registers as uboot did before.
Thanks for your review, Heiner,
I am working on a platform and want to use the method you said, reading from DTS is easy, but overwrite the MAC in DTS with chip MAC address, it will change the checksum of the image. Would you please provide an implementation example?
Thanks!
Quoted 5 lines
Quoted 5 lines
Do we need to worry about, the chip contains random junk, which passes the validitiy test? Before this patch the value from DT would be used, and the random junk is ignored. Is this change possibly going to cause a regression?
Hi Andrew,
Thanks for your review. Yes, yours is a good point, as my change relies on the driver's ability to read correct MAC from the chip, or the check of is_valid_ether_addr(), which only checking for zeros and multicasting MAC. On the other hand, your concern is still true if no MAC is defined in DTS file.
Thanks!
Quoted 11 lines
Hongwei, please address Andrew's questions.
Once the discussion is over please repost the patches as git-format-patch would generate them. The patch 2/2 of this series is not really a patch, which confuses all patch handling systems.
It also appears that
35c54922dc97("ARM: dts: tacoma: Add reserved memory for ramoops") does not exist upstream.
Hi Jakub,
Thanks for your review; I am quite new to the contribution process. I will resubmit my patch with the SHA value issue fixed. Please see my response at above.
--Hongwei
Signature · 1 line
2.17.1
Quoted 40 lines · Hongwei Zhang
Quoted 39 lines
From: Jakub Kicinski <[email protected]>
Sent: Monday, December 28, 2020 5:01 PMQuoted 34 lines · On Tue, 22 Dec 2020 22:00:34 +0100 Andrew Lunn wrote:
Quoted 33 lines · Heiner Kallweit
Quoted 19 lines · Hongwei Zhang
Dear Reviewer,
Use native MAC address is preferred over other choices, thus change the order of reading MAC address, try to read it from MAC chip first, if it's not
availabe, then try to read it from device tree.Hi Heiner,
Quoted 10 lines
From: Heiner Kallweit <[email protected]> Sent: Monday, December 21, 2020 4:37 PMQuoted 3 lines
Change the order of reading MAC address, try to read it from MAC chip first, if it's not availabe, then try to read it from device tree.
This commit message leaves a number of questions. It seems the change isn't related at all to the change that it's supposed to fix.
- What is the issue that you're trying to fix?
- And what is wrong with the original change?Quoted 8 lines
There is no bug or something wrong with the original code. This patch is for improving the code. We thought if the native MAC address is available, then it's preferred over MAC address from dts (assuming both sources are available).
One possible scenario, a MAC address is set in dts and the BMC image is compiled and loaded into more than one platform, then the platforms will have network issue due to the same MAC address they read.
Typically the DTS MAC address is overwritten by the boot loader, e.g. uboot. And the boot loader can read it from chip registers. There are more drivers trying to read the MAC address from DTS first. Eventually, I think, the code here will read the same MAC address from chip registers as uboot did before.
Quoted 6 lines
Thanks for your review, Heiner,
I am working on a platform and want to use the method you said, reading from DTS is easy, but overwrite the MAC in DTS with chip MAC address, it will change the checksum of the image. Would you please provide an implementation example?
One example is the igb driver. That's the relevant code snippet:
if (eth_platform_get_mac_address(&pdev->dev, hw->mac.addr)) {
/* copy the MAC address out of the NVM */
if (hw->mac.ops.read_mac_addr(hw))
dev_err(&pdev->dev, "NVM Read Error\n");
}And I'm not sure the image checksum is relevant here. The boot loader dynamically replaces the MAC address before handing over the DTS to Linux kernel. At that time an image checksum shouldn't be relevant. Who would be supposed to check it?
Quoted 35 lines
Thanks!
Quoted 5 lines
Quoted 5 lines
Do we need to worry about, the chip contains random junk, which passes the validitiy test? Before this patch the value from DT would be used, and the random junk is ignored. Is this change possibly going to cause a regression?
Hi Andrew,
Thanks for your review. Yes, yours is a good point, as my change relies on the driver's ability to read correct MAC from the chip, or the check of
is_valid_ether_addr(), which only checking for zeros and multicasting MAC. On the other hand, your concern is still true if no MAC is defined in DTS file.Thanks!
Quoted 11 lines
Hongwei, please address Andrew's questions.
Once the discussion is over please repost the patches as git-format-patch would generate them. The patch 2/2 of this series is not really a patch, which confuses all patch handling systems.
It also appears that
35c54922dc97("ARM: dts: tacoma: Add reserved memory for ramoops") does not exist upstream.Hi Jakub,
Thanks for your review; I am quite new to the contribution process. I will resubmit my patch with the SHA value issue fixed. Please see my response at above.
--Hongwei