add rtctime libs and rtc02 case
cover add rtctime libs and rtc02 case
From: Cixi Geng <[email protected]>
This file is a implementation for rtc test function
in tst_rtctime lib, support tst_rtc_gettime and tst_rtc_settime; at the same file, also add rtctime and time_t convert functions. in tst_wallclock.s, add tst_rtc_save and tst_rtc_restore for testcase used in SETUP and CLEANUP.
the rtc02 testcase is verify set rtctime a exact timestamp.
Cixi Geng (3):
lib: add tst_rtctime* for rtc test
lib: implement rtctime_save and rtctime_restore function
rtc02: add rtc set time verify case
include/tst_rtctime.h | 15 ++ include/tst_wallclock.h | 4 + lib/tst_rtctime.c | 161 ++++++++++++++++++ lib/tst_wallclock.c | 42 +++++ runtest/kernel_misc | 1 + .../kernel/device-drivers/rtc/.gitignore | 1 + testcases/kernel/device-drivers/rtc/rtc02.c | 108 ++++++++++++ 7 files changed, 332 insertions(+) create mode 100644 include/tst_rtctime.h create mode 100644 lib/tst_rtctime.c create mode 100644 testcases/kernel/device-drivers/rtc/rtc02.c
Signature · 1 line
2.25.1
PATCH 1/3 lib: add tst_rtctime* for rtc test
From: Cixi Geng <[email protected]>
Add:
get rtc time and set rtc time in default /dev/rtc; Implemented a function that covert rtc time to time_t this will be used in tst_rtc_save and tst_rtc_restore
--- include/tst_rtctime.h | 15 ++++ lib/tst_rtctime.c | 161 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 176 insertions(+) create mode 100644 include/tst_rtctime.h create mode 100644 lib/tst_rtctime.c
include/tst_rtctime.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2020 Unisoc Inc. +*/ + +#ifndef TST_RTCTIME +#define TST_RTCTIME + +#include <linux/rtc.h> + +int tst_rtc_gettime (struct rtc_time *rtc_tm); + +int tst_rtc_settime (struct rtc_time *rtc_tm); + +#endif /* TST_RTCTIME */
lib/tst_rtctime.c new file +161 -0
161 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 1/3 lib: add tst_rtctime* for rtc test
Hi!
Quoted 18 lines
get rtc time and set rtc time in default
/dev/rtc; Implemented a function that covert rtc time totime_tthis will be used intst_rtc_saveandtst_rtc_restoreSigned-off-by Cixi Geng <[email protected]>--- include/tst_rtctime.h | 15 ++++ lib/tst_rtctime.c | 161 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 176 insertions(+) create mode 100644 include/tst_rtctime.h create mode 100644 lib/tst_rtctime.cinclude/tst_rtctime.h new file +0
-0
include/tst_rtctime.h line 1
Quoted 1 line
include/tst_rtctime.h new file +1
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */
This is not correct format for the identifiers, the comment has to start with //
Also the default license for new LTP code i GPL-2.0-or-later, so please us that unless you have a reason to stick to GPL-2.0.
include/tst_rtctime.h line 13
Quoted 12 lines
include/tst_rtctime.h new file +12
-0+/* +* Copyright (C) 2020 Unisoc Inc. +*/ + +#ifndef TST_RTCTIME +#define TST_RTCTIME + +#include <linux/rtc.h> + +int tst_rtc_gettime (struct rtc_time *rtc_tm); + +int tst_rtc_settime (struct rtc_time *rtc_tm);
Should we add a path to the RTC device to these functions as well?
Are there any boards that have more than one RTC where we would need to loop over all available devices during the test?
Quoted 106 lines
include/tst_rtctime.h new file +1
-0+#endif /* TST_RTCTIME */ lib/tst_rtctime.c new file +99
-0@@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 Unisoc Communications Inc. +* +* Filename : tst_rtctime.c +* Abstract : This file is a implementation for rtc set read,covert to tm functions +*/ + +#include <linux/rtc.h> +#include <stdbool.h> +#include <limits.h> +#define TST_NO_DEFAULT_MAIN +#include "tst_test.h" +#include "tst_rtctime.h" + +#define LEAPS_THRU_END_OF (y) ((y) / 4 - (y) / 100 + (y) / 400) + +static const unsigned char rtc_days_in_month[] = { +31 ,28 ,31 ,30 ,31 ,30 ,31 ,31 ,30 ,31 ,30 ,31 +}; + +static inline bool is_leap_year (unsigned int year) +{ +return (!(year %4 ) && (year %100 )) || !(year %400 ); +} + +static long long tst_mktime (const unsigned int year0,const unsigned int mon0, +const unsigned int day,const unsigned int hour, +const unsigned int min,const unsigned int sec) +{ +unsigned int mon = mon0, year = year0; + +/* 1..12 -> 11,12,1..10 */ + mon -=2 ; +if (0 >= (int ) (mon)) { + mon +=12 ;/* Puts Feb last since it has leap day */ + year -=1 ; + } + +return ((((long long ) + (year/4 - year/100 + year/400 +367 *mon/12 + day) + + year*365 -719499 + )*24 + hour/* now have hours - midnight tomorrow handled here */ + )*60 + min/* now have minutes */ + )*60 + sec;/* finally seconds */ +} + +/* +* The number of days in the month. +*/ +static int rtc_month_days (unsigned int month,unsigned int year) +{ +return rtc_days_in_month[month] + (is_leap_year (year) && month ==1 ); +} + +/* +* tst_rtc_time_to_tm - Converts time_t to rtc_time. +* Convert seconds since 01-01-1970 00:00:00 to Gregorian date. +*/ +void tst_rtc_time_to_tm (long long time,struct rtc_time *tm) +{ +unsigned int month, year, secs; +int days; + +/* time must be positive */ + days = time /86400 ; + secs = time %86400 ; + +/* day of the week, 1970-01-01 was a Thursday */ + tm->tm_wday = (days +4 ) %7 ; + + year =1970 + days /365 ; + days -= (year -1970 ) *365 + +LEAPS_THRU_END_OF (year -1 ) + -LEAPS_THRU_END_OF (1970 -1 ); +while (days <0 ) { + year -=1 ; + days +=365 +is_leap_year (year); + } + tm->tm_year = year -1900 ; + tm->tm_yday = days +1 ; + +for (month =0 ; month <11 ; month++) { +int newdays; + + newdays = days -rtc_month_days (month, year); +if (newdays <0 ) +break ; + days = newdays; + } + tm->tm_mon = month; + tm->tm_mday = days +1 ; + + tm->tm_hour = secs /3600 ; + secs -= tm->tm_hour *3600 ; + tm->tm_min = secs /60 ; + tm->tm_sec = secs - tm->tm_min *60 ; + + tm->tm_isdst =0 ;
lib/tst_rtctime.c line 109
Quoted 10 lines
lib/tst_rtctime.c new file +10
-0+} + +/* +* tst_rtc_tm_to_time - Converts rtc_time to time_t. +* Convert Gregorian date to seconds since 01-01-1970 00:00:00. +*/ +long long tst_rtc_tm_to_time (struct rtc_time *tm) +{ +return tst_mktime (((unsigned int )tm->tm_year +1900 ), tm->tm_mon +1 , + tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec);
So I guess that the reason why we can't use libc mktime() and gmtime_r() is that time_t is 32bit on older 32bit architectures, right?
lib/tst_rtctime.c line 119
Quoted 10 lines
lib/tst_rtctime.c new file +10
-0+} + +static int rtc_supported_by_kernel (const char *rtc_dev) +{ +int exists =access (rtc_dev,F_OK ); + +if (exists <0 ) +tst_brk (TCONF ,"RTC device %s not available" , rtc_dev); +return 0 ; +}
This function should be called by the tests rather than from the test library.
Quoted 31 lines
lib/tst_rtctime.c new file +31
-0+static int tst_rtc_ioctl (unsigned long request,struct rtc_time *rtc_tm) +{ +int ret; +int rtc_fd =-1 ; +static const char *rtc_dev ="/dev/rtc" ; + +if (!rtc_supported_by_kernel (rtc_dev)) + rtc_fd =SAFE_OPEN (rtc_dev,O_RDONLY ); + + ret =ioctl (rtc_fd, request, rtc_tm); + +if (ret !=0 ) +return -1 ; + +if (rtc_fd >0 ) +SAFE_CLOSE (rtc_fd); + +return 0 ; +} + +int tst_rtc_gettime (struct rtc_time *rtc_tm) +{ +int ret; + + ret =tst_rtc_ioctl (RTC_RD_TIME , rtc_tm); + +if (ret !=0 ) +return -1 ; +return 0 ; +} +
lib/tst_rtctime.c line 161
Quoted 10 lines
lib/tst_rtctime.c new file +10
-0+int tst_rtc_settime (struct rtc_time *rtc_tm) +{ +int ret; + + ret =tst_rtc_ioctl (RTC_SET_TIME , rtc_tm); + +if (ret !=0 ) +return -1 ; +return 0 ; +}
These two functions can be static inline and declared in the header as:
static inline int tst_rtc_settime(struct rtc_time *rtc_tm)
{
return tst_rtc_ioctl(RTC_SET_TIME, rtc_tm);
}Signature · 2 lines
Cyril Hrubis [email protected]
PATCH 1/3 lib: add tst_rtctime* for rtc test
Cyril Hrubis <[email protected]> ?2021?1?7??? ??9:49???
Quoted 43 lines
Hi!
Quoted 18 lines
get rtc time and set rtc time in default
/dev/rtc; Implemented a function that covert rtc time totime_tthis will be used intst_rtc_saveandtst_rtc_restoreSigned-off-by Cixi Geng <[email protected]>--- include/tst_rtctime.h | 15 ++++ lib/tst_rtctime.c | 161 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 176 insertions(+) create mode 100644 include/tst_rtctime.h create mode 100644 lib/tst_rtctime.cinclude/tst_rtctime.h new file +0
-0include/tst_rtctime.h line 1
Quoted 1 line
include/tst_rtctime.h new file +1
-0@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ This is not correct format for the identifiers, the comment has to start with //
Also the default license for new LTP code i GPL-2.0-or-later, so please us that unless you have a reason to stick to GPL-2.0.
include/tst_rtctime.h line 13
Quoted 12 lines
include/tst_rtctime.h new file +12
-0+/* +* Copyright (C) 2020 Unisoc Inc. +*/ + +#ifndef TST_RTCTIME +#define TST_RTCTIME + +#include <linux/rtc.h> + +int tst_rtc_gettime (struct rtc_time *rtc_tm); + +int tst_rtc_settime (struct rtc_time *rtc_tm);Should we add a path to the RTC device to these functions as well?
Quoted 2 lines
Are there any boards that have more than one RTC where we would need to loop over all available devices during the test?
I test this case in x86_64 and arm64, in these machines? I check the /dev/rtc is a linked file which link to /dev/rtc0. so I use the /dev/rtc0 as default device. but I
wiil take adopt your suggestion, add a device path parameter.
Quoted 112 lines
Quoted 112 lines
include/tst_rtctime.h new file +1
-0+#endif /* TST_RTCTIME */ lib/tst_rtctime.c new file +104
-0@@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 Unisoc Communications Inc. +* +* Filename : tst_rtctime.c +* Abstract : This file is a implementation for rtc set read,covert to tm functions +*/ + +#include <linux/rtc.h> +#include <stdbool.h> +#include <limits.h> +#define TST_NO_DEFAULT_MAIN +#include "tst_test.h" +#include "tst_rtctime.h" + +#define LEAPS_THRU_END_OF (y) ((y) / 4 - (y) / 100 + (y) / 400) + +static const unsigned char rtc_days_in_month[] = { +31 ,28 ,31 ,30 ,31 ,30 ,31 ,31 ,30 ,31 ,30 ,31 +}; + +static inline bool is_leap_year (unsigned int year) +{ +return (!(year %4 ) && (year %100 )) || !(year %400 ); +} + +static long long tst_mktime (const unsigned int year0,const unsigned int mon0, +const unsigned int day,const unsigned int hour, +const unsigned int min,const unsigned int sec) +{ +unsigned int mon = mon0, year = year0; + +/* 1..12 -> 11,12,1..10 */ + mon -=2 ; +if (0 >= (int ) (mon)) { + mon +=12 ;/* Puts Feb last since it has leap day */ + year -=1 ; + } + +return ((((long long ) + (year/4 - year/100 + year/400 +367 *mon/12 + day) + + year*365 -719499 + )*24 + hour/* now have hours - midnight tomorrow handled here */ + )*60 + min/* now have minutes */ + )*60 + sec;/* finally seconds */ +} + +/* +* The number of days in the month. +*/ +static int rtc_month_days (unsigned int month,unsigned int year) +{ +return rtc_days_in_month[month] + (is_leap_year (year) && month ==1 ); +} + +/* +* tst_rtc_time_to_tm - Converts time_t to rtc_time. +* Convert seconds since 01-01-1970 00:00:00 to Gregorian date. +*/ +void tst_rtc_time_to_tm (long long time,struct rtc_time *tm) +{ +unsigned int month, year, secs; +int days; + +/* time must be positive */ + days = time /86400 ; + secs = time %86400 ; + +/* day of the week, 1970-01-01 was a Thursday */ + tm->tm_wday = (days +4 ) %7 ; + + year =1970 + days /365 ; + days -= (year -1970 ) *365 + +LEAPS_THRU_END_OF (year -1 ) + -LEAPS_THRU_END_OF (1970 -1 ); +while (days <0 ) { + year -=1 ; + days +=365 +is_leap_year (year); + } + tm->tm_year = year -1900 ; + tm->tm_yday = days +1 ; + +for (month =0 ; month <11 ; month++) { +int newdays; + + newdays = days -rtc_month_days (month, year); +if (newdays <0 ) +break ; + days = newdays; + } + tm->tm_mon = month; + tm->tm_mday = days +1 ; + + tm->tm_hour = secs /3600 ; + secs -= tm->tm_hour *3600 ; + tm->tm_min = secs /60 ; + tm->tm_sec = secs - tm->tm_min *60 ; + + tm->tm_isdst =0 ; +} + +/* +* tst_rtc_tm_to_time - Converts rtc_time to time_t. +* Convert Gregorian date to seconds since 01-01-1970 00:00:00.
Quoted 8 lines
lib/tst_rtctime.c line 109
Quoted 5 lines
lib/tst_rtctime.c new file +5
-0+*/ +long long tst_rtc_tm_to_time (struct rtc_time *tm) +{ +return tst_mktime (((unsigned int )tm->tm_year +1900 ), tm->tm_mon +1 , + tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec);So I guess that the reason why we can't use libc
mktime()andgmtime_r()is thattime_tis 32bit on older 32bit architectures, right?
these functions is porting int kernel rtc-lib.c rtc_tm_to_time64() which defaut retrun is time64_t, mktime64. so I convert time64_t to long long type
Quoted 14 lines
lib/tst_rtctime.c line 119
Quoted 11 lines
lib/tst_rtctime.c new file +10
-0+} + +static int rtc_supported_by_kernel (const char *rtc_dev) +{ +int exists =access (rtc_dev,F_OK ); + +if (exists <0 ) +tst_brk (TCONF ,"RTC device %s not available" , rtc_dev); +return 0 ; +}This function should be called by the tests rather than from the test library.
next version modify it.
Quoted 54 lines
Quoted 32 lines
lib/tst_rtctime.c new file +31
-0+static int tst_rtc_ioctl (unsigned long request,struct rtc_time *rtc_tm) +{ +int ret; +int rtc_fd =-1 ; +static const char *rtc_dev ="/dev/rtc" ; + +if (!rtc_supported_by_kernel (rtc_dev)) + rtc_fd =SAFE_OPEN (rtc_dev,O_RDONLY ); + + ret =ioctl (rtc_fd, request, rtc_tm); + +if (ret !=0 ) +return -1 ; + +if (rtc_fd >0 ) +SAFE_CLOSE (rtc_fd); + +return 0 ; +} + +int tst_rtc_gettime (struct rtc_time *rtc_tm) +{ +int ret; + + ret =tst_rtc_ioctl (RTC_RD_TIME , rtc_tm); + +if (ret !=0 ) +return -1 ; +return 0 ; +} +lib/tst_rtctime.c line 161
Quoted 10 lines
lib/tst_rtctime.c new file +10
-0+int tst_rtc_settime (struct rtc_time *rtc_tm) +{ +int ret; + + ret =tst_rtc_ioctl (RTC_SET_TIME , rtc_tm); + +if (ret !=0 ) +return -1 ; +return 0 ; +}These two functions can be static inline and declared in the header as:
static inline int
tst_rtc_settime(struct rtc_time *rtc_tm){ return tst_rtc_ioctl(RTC_SET_TIME, rtc_tm); }--
Cyril Hrubis
[email protected]
PATCH 2/3 lib: implement rtctime_save and rtctime_restore function
In reply to [email protected]From: Cixi Geng <[email protected]>
* Reading the RTC in the setup as well as timestamping with monotonic timer
* Getting a second monotonic timestamp in the cleanup
* Setting the RTC to the value taken in setup plus the difference in the monotonic timer timestamps
--- include/tst_wallclock.h | 4 ++++ lib/tst_wallclock.c | 42 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+)
include/tst_wallclock.h +4 -0
@@ -12,4 +12,8 @@ void tst_wallclock_save(void);void tst_wallclock_restore (void ); +void tst_rtctime_save (void ); + +void tst_rtctime_restore (void ); +#endif /* TST_WALLCLK_H__ */
lib/tst_wallclock.c +42 -0
56 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 2/3 lib: implement rtctime_save and rtctime_restore function
Quoted 12 lines
static struct timespec
real_begin,mono_begin;lib/tst_wallclock.c +3
-0+static struct rtc_time rtc_begin; +static int clock_saved;void tst_wallclock_save (void )@@ -58,3 +61,42 @@ void tst_wallclock_restore(void)if (tst_clock_settime (CLOCK_REALTIME , &adjust))tst_brk (TBROK |TERRNO ,"tst_clock_settime() realtime failed" ); } +
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 74
Quoted 10 lines
lib/tst_wallclock.c +10
-0+void tst_rtctime_save (void ) +{ +/* save initial monotonic time to restore it when needed */ +if (tst_rtc_gettime (&rtc_begin)) +tst_brk (TBROK |TERRNO ,"tst_rtc_gettime() realtime failed" ); + +if (tst_clock_gettime (CLOCK_MONOTONIC_RAW , &mono_begin)) +tst_brk (TBROK |TERRNO ,"tst_clock_gettime() monotonic failed" ); + + clock_saved =1 ;
It would be better if we defined rtc_clock_saved for the rtc* functions instead.
Quoted 9 lines
lib/tst_wallclock.c +9
-0+} + +void tst_rtctime_restore (void ) +{ +static struct timespec mono_end, elapsed; +static struct timespec rtc_begin_tm, rtc_adjust; +static struct rtc_time rtc_restore; + +if (!clock_saved)
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 93
Quoted 10 lines
lib/tst_wallclock.c +10
-0+return ; + + clock_saved =0 ; + +if (tst_clock_gettime (CLOCK_MONOTONIC_RAW , &mono_end)) +tst_brk (TBROK |TERRNO ,"tst_clock_gettime() monotonic failed" ); + + elapsed =tst_timespec_diff (mono_end, mono_begin); + + rtc_begin_tm.tv_sec =tst_rtc_tm_to_time (&rtc_begin);
We should clear the tv_nsec here otherwise it will contain garbage.
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 102
Quoted 8 lines
lib/tst_wallclock.c +8
-0+ rtc_adjust =tst_timespec_add (rtc_begin_tm, elapsed); + +tst_rtc_time_to_tm (rtc_adjust.tv_sec, &rtc_restore); + +/* restore realtime clock based on monotonic delta */ +if (tst_rtc_settime (&rtc_restore)) +tst_brk (TBROK |TERRNO ,"tst_rtc_settime() realtime failed" ); +}
Other than this, it looks good.
Signature · 2 lines
Cyril Hrubis [email protected]
PATCH 2/3 lib: implement rtctime_save and rtctime_restore function
Cyril Hrubis <[email protected]> ?2021?1?7??? ??9:56???
Quoted 40 lines
Quoted 13 lines
static struct timespec
real_begin,mono_begin;lib/tst_wallclock.c +3
-0+static struct rtc_time rtc_begin; +static int clock_saved;void tst_wallclock_save (void )@@ -58,3 +61,42 @@ void tst_wallclock_restore(void)if (tst_clock_settime (CLOCK_REALTIME , &adjust))tst_brk (TBROK |TERRNO ,"tst_clock_settime() realtime failed" ); } +lib/tst_wallclock.c void tst_wallclock_restore(void) · line 74
Quoted 10 lines
lib/tst_wallclock.c +10
-0+void tst_rtctime_save (void ) +{ +/* save initial monotonic time to restore it when needed */ +if (tst_rtc_gettime (&rtc_begin)) +tst_brk (TBROK |TERRNO ,"tst_rtc_gettime() realtime failed" ); + +if (tst_clock_gettime (CLOCK_MONOTONIC_RAW , &mono_begin)) +tst_brk (TBROK |TERRNO ,"tst_clock_gettime() monotonic failed" ); + + clock_saved =1 ;It would be better if we defined
rtc_clock_savedfor the rtc* functions instead.Quoted 13 lines
lib/tst_wallclock.c +13
-0+} + +void tst_rtctime_restore (void ) +{ +static struct timespec mono_end, elapsed; +static struct timespec rtc_begin_tm, rtc_adjust; +static struct rtc_time rtc_restore; + +if (!clock_saved) +return ; + + clock_saved =0 ; +
Quoted 8 lines
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 93
Quoted 6 lines
lib/tst_wallclock.c +6
-0+if (tst_clock_gettime (CLOCK_MONOTONIC_RAW , &mono_end)) +tst_brk (TBROK |TERRNO ,"tst_clock_gettime() monotonic failed" ); + + elapsed =tst_timespec_diff (mono_end, mono_begin); + + rtc_begin_tm.tv_sec =tst_rtc_tm_to_time (&rtc_begin);We should clear the
tv_nsechere otherwise it will contain garbage.
The rtc_begin_tm is defined in this function? and tv_nsec never assigned? so I think it will not produce any garbage.
Quoted 15 lines
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 102
Quoted 9 lines
lib/tst_wallclock.c +8
-0+ rtc_adjust =tst_timespec_add (rtc_begin_tm, elapsed); + +tst_rtc_time_to_tm (rtc_adjust.tv_sec, &rtc_restore); + +/* restore realtime clock based on monotonic delta */ +if (tst_rtc_settime (&rtc_restore)) +tst_brk (TBROK |TERRNO ,"tst_rtc_settime() realtime failed" ); +}Other than this, it looks good.
--
Cyril Hrubis
[email protected]
PATCH 2/3 lib: implement rtctime_save and rtctime_restore function
Hi!
Quoted 19 lines
Quoted 11 lines
Quoted 11 lines
lib/tst_wallclock.c +11
-0+void tst_rtctime_restore (void ) +{ +static struct timespec mono_end, elapsed; +static struct timespec rtc_begin_tm, rtc_adjust; +static struct rtc_time rtc_restore; + +if (!clock_saved) +return ; + + clock_saved =0 ; +Quoted 8 lines
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 93
Quoted 6 lines
lib/tst_wallclock.c +6
-0+if (tst_clock_gettime (CLOCK_MONOTONIC_RAW , &mono_end)) +tst_brk (TBROK |TERRNO ,"tst_clock_gettime() monotonic failed" ); + + elapsed =tst_timespec_diff (mono_end, mono_begin); + + rtc_begin_tm.tv_sec =tst_rtc_tm_to_time (&rtc_begin);We should clear the
tv_nsechere otherwise it will contain garbage.
Quoted 2 lines
The
rtc_begin_tmis defined in this function??? andtv_nsecnever assigned??? so I think it will not produce any garbage.
It's never assigned and declared on stack, so it will contain garbage which will be eventually added to the rtc_adjust.tv_sec. Technically the tv_nsec is long, so on 64 bit platform it may add up to 10^10 seconds to the result if we are unlucky and upper bits are set. On 32 bit there is not much room for error btw, up to 2 seconds since long is only 4bytes there.
Quoted 14 lines
Quoted 14 lines
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 102
Quoted 8 lines
lib/tst_wallclock.c +8
-0+ rtc_adjust =tst_timespec_add (rtc_begin_tm, elapsed); + +tst_rtc_time_to_tm (rtc_adjust.tv_sec, &rtc_restore); + +/* restore realtime clock based on monotonic delta */ +if (tst_rtc_settime (&rtc_restore)) +tst_brk (TBROK |TERRNO ,"tst_rtc_settime() realtime failed" ); +}Other than this, it looks good.
--
Cyril Hrubis
[email protected]
Signature · 2 lines
Cyril Hrubis [email protected]
PATCH 2/3 lib: implement rtctime_save and rtctime_restore function
Cyril Hrubis <[email protected]> ?2021?1?8??? ??5:33???
Quoted 24 lines
Hi!
Quoted 19 lines
Quoted 11 lines
Quoted 11 lines
lib/tst_wallclock.c +11
-0+void tst_rtctime_restore (void ) +{ +static struct timespec mono_end, elapsed; +static struct timespec rtc_begin_tm, rtc_adjust; +static struct rtc_time rtc_restore; + +if (!clock_saved) +return ; + + clock_saved =0 ; +Quoted 8 lines
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 93
Quoted 6 lines
lib/tst_wallclock.c +6
-0+if (tst_clock_gettime (CLOCK_MONOTONIC_RAW , &mono_end)) +tst_brk (TBROK |TERRNO ,"tst_clock_gettime() monotonic failed" ); + + elapsed =tst_timespec_diff (mono_end, mono_begin); + + rtc_begin_tm.tv_sec =tst_rtc_tm_to_time (&rtc_begin);We should clear the
tv_nsechere otherwise it will contain garbage.Quoted 2 lines
The
rtc_begin_tmis defined in this function??? andtv_nsecnever assigned??? so I think it will not produce any garbage.
Quoted 7 lines
It's never assigned and declared on stack, so it will contain garbage which will be eventually added to the rtc_adjust.tv_sec. Technically the
tv_nsecis long, so on 64 bit platform it may add up to 10^10 seconds to the result if we are unlucky and upper bits are set. On 32 bit there is not much room for error btw, up to 2 seconds since long is only 4bytes there.
ok,I got it, thanks for you explain, I will fixed this issue
Quoted 18 lines
Quoted 11 lines
Quoted 11 lines
lib/tst_wallclock.c void tst_wallclock_restore(void) · line 102
Quoted 8 lines
lib/tst_wallclock.c +8
-0+ rtc_adjust =tst_timespec_add (rtc_begin_tm, elapsed); + +tst_rtc_time_to_tm (rtc_adjust.tv_sec, &rtc_restore); + +/* restore realtime clock based on monotonic delta */ +if (tst_rtc_settime (&rtc_restore)) +tst_brk (TBROK |TERRNO ,"tst_rtc_settime() realtime failed" ); +}Other than this, it looks good.
Quoted 3 lines
Quoted 3 lines
--
Cyril Hrubis
[email protected]--
Cyril Hrubis
[email protected]
PATCH 3/3 rtc02: add rtc set time verify case
In reply to [email protected]From: Cixi Geng <[email protected]>
Test for the Real Time Clock driver.
* Veirify that,
* 1) set a RTC time
* 2) read the RTC time after set RTC time at once
* 3) compare the set time and the read is identical
--- runtest/kernel_misc | 1 + .../kernel/device-drivers/rtc/.gitignore | 1 + testcases/kernel/device-drivers/rtc/rtc02.c | 108 ++++++++++++++++++ 3 files changed, 110 insertions(+) create mode 100644 testcases/kernel/device-drivers/rtc/rtc02.c
runtest/kernel_misc +1 -0
@@ -1,6 +1,7 @@ kmsg01 kmsg01 fw_load fw_load rtc01 rtc01 +rtc02 rtc02 block_dev block_dev tpci tpci tbio tbio
testcases/kernel/device-drivers/rtc/.gitignore +1 -0
@@ -1 +1,2 @@ /rtc01 +/rtc02
testcases/kernel/device-drivers/rtc/rtc02.c new file +108 -0
108 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 3/3 rtc02: add rtc set time verify case
Hi!
Quoted 39 lines
Test for the Real Time Clock driver.
* Veirify that,
* 1) set a RTC time
* 2) read the RTC time after set RTC time at once
* 3) compare the set time and the read is identicalSigned-off-by Cixi Geng <[email protected]>--- runtest/kernel_misc | 1 + .../kernel/device-drivers/rtc/.gitignore | 1 + testcases/kernel/device-drivers/rtc/rtc02.c | 108 ++++++++++++++++++ 3 files changed, 110 insertions(+) create mode 100644 testcases/kernel/device-drivers/rtc/rtc02.cruntest/kernel_misc +1
-0@@ -1,6 +1,7 @@ kmsg01 kmsg01 fw_load fw_load rtc01 rtc01 +rtc02 rtc02 block_dev block_dev tpci tpci tbio tbiotestcases/kernel/device-drivers/rtc/.gitignore +1
-0@@ -1 +1,2 @@ /rtc01 +/rtc02testcases/kernel/device-drivers/rtc/rtc02.c new file +0
-0
testcases/kernel/device-drivers/rtc/rtc02.c line 5
Quoted 5 lines
testcases/kernel/device-drivers/rtc/rtc02.c new file +5
-0@@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2020 Unisoc Communications Inc. +* +* Filename : rtc02.c
This is pretty much useless information.
testcases/kernel/device-drivers/rtc/rtc02.c line 6
Quoted 1 line
testcases/kernel/device-drivers/rtc/rtc02.c new file +1
-0+* Abstract : This file is a implementation test rtc set function.
And this as well as we do have a test description in the separate comment.
testcases/kernel/device-drivers/rtc/rtc02.c line 18
Quoted 12 lines
testcases/kernel/device-drivers/rtc/rtc02.c new file +12
-0+*/ + +/* +* Test description +* +* Test for the Real Time Clock driver. +* Veirify that, +* 1) set a RTC time +* 2) read the RTC time after set RTC time at once +* 3) compare the set time and the read is identical +* +*/
Can you please reformat this into special asciidoc formatted comment so that it's picked up correctly by the documentation parser?
Have a look for example at top level comment in syscalls/ipc/shmctl/shmctl01.c
testcases/kernel/device-drivers/rtc/rtc02.c line 26
Quoted 7 lines
testcases/kernel/device-drivers/rtc/rtc02.c new file +7
-0+#include "tst_rtctime.h" +#include "tst_wallclock.h" +#include "tst_test.h" + +static struct rtc_time show_tm; + +static char *tst_show_rtctime (struct rtc_time *tm)
This function should be rather named rtctime_to_str() or something along these lines, also test functions must not start with tst_ that prefix is reserved to test library.
Quoted 19 lines
testcases/kernel/device-drivers/rtc/rtc02.c new file +19
-0+{ +static char rtctime_buf[20 ]; + +sprintf (rtctime_buf,"%04d-%02d-%02d %02d:%02d:%02d" , + tm->tm_year +1900 , + tm->tm_mon +1 , + tm->tm_mday, + tm->tm_hour, + tm->tm_min, + tm->tm_sec); +return rtctime_buf; +} + +static void rtc_setup (void ) +{ +tst_rtctime_save (); +} + +static int rtc_tm_cmp (struct rtc_time *set_tm,struct rtc_time *read_tm)
testcases/kernel/device-drivers/rtc/rtc02.c line 55
Quoted 10 lines
testcases/kernel/device-drivers/rtc/rtc02.c new file +10
-0+{ +if ((set_tm->tm_sec == read_tm->tm_sec) + && (set_tm->tm_min == read_tm->tm_min) + && (set_tm->tm_hour == read_tm->tm_hour) + && (set_tm->tm_mday == read_tm->tm_mday) + && (set_tm->tm_mon == read_tm->tm_mon) + && (set_tm->tm_year == read_tm->tm_year)) { +return 0 ; + } +return -1 ;
This can be just:
return !((set_tm->tm_sec == read_tm->tm_sec) && ...);
Quoted 56 lines
testcases/kernel/device-drivers/rtc/rtc02.c new file +53
-0+} + +static void set_rtc_test (void ) +{ +struct rtc_time read_tm; +int ret; + +struct rtc_time set_tm = { + .tm_sec =30 , + .tm_min =23 , + .tm_hour =13 , + .tm_mday =9 , + .tm_mon =9 , + .tm_year =120 , + }; + +/* set rtc to 2020.10.9 13:23:30 */ +tst_res (TINFO ,"To set RTC date/time is: %s" ,tst_show_rtctime (&set_tm)); + + ret =tst_rtc_settime (&set_tm); +if (ret !=0 ) { +tst_res (TFAIL |TERRNO ,"RTC_SET_TIME failed" ); +return ; + } + +/* Read current RTC Time */ + ret =tst_rtc_gettime (&read_tm); +if (ret !=0 ) { +tst_res (TFAIL |TERRNO ,"RTC_RD_TIME failed" ); +return ; + } +tst_res (TINFO ,"read RTC date/time is: %s" ,tst_show_rtctime (&read_tm)); + +if (rtc_tm_cmp (&set_tm, &read_tm)) { +tst_res (TFAIL |TERRNO ,"RTC SET TEST Failed" ); +return ; + } +tst_res (TPASS ,"The read RTC time is consistent with set" ); + +} + +static void rtc_cleanup (void ) +{ +tst_rtctime_restore (); +} + +static struct tst_test test = { + .setup = rtc_setup, + .test_all = set_rtc_test, + .cleanup = rtc_cleanup, +/* tests needs to run with UID=0 */ + .needs_root =1 , +};Signature · 1 line
2.25.1
Signature · 2 lines
Cyril Hrubis [email protected]
cover add rtctime libs and rtc02 case
In reply to [email protected]Hi!
Overall this version looks good, there are a few things that should be fixed, but it's getting close to a final version.
Signature · 2 lines
Cyril Hrubis [email protected]