Skip to contentSkip to conversation

ARM: dts: stm32: Disable KS8851 and FMC on PicoITX board

PATCH In review Marek Vasut 2 participants 2 messages Dec 24, 2020 – Jan 14, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: dts: stm32: Disable KS8851 and FMC on PicoITX board

The PicoITX has only one ethernet routed out, so the KS8851 is not used at all. Disable the KS8851 and the entire FMC controller.

Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>

To: [email protected]
---
V2: Drop the "ebi" node, which is no longer present

---
 arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +8 -0
index b99f2b891629..25528a1c096f 100644
@@ -36,6 +36,10 @@ &dac {
 	status = "disabled";
 };
 
+&fmc {
+	status = "disabled";
+};
+
 &gpioa {
 	/*
 	 * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable
@@ -94,6 +98,10 @@ &i2c5 {	/* On board-to-board connector */
 	/delete-property/dma-names;
 };
 
+&ksz8851 {
+	status = "disabled";
+};
+
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
Signature · 7 lines
2.29.2


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
maintainer
#1 lore raw
Quoted 9 lines · Marek Vasut

The PicoITX has only one ethernet routed out, so the KS8851 is not used at all. Disable the KS8851 and the entire FMC controller.

Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>
Quoted 4 lines

To: [email protected]
---
V2: Drop the "ebi" node, which is no longer present
---

Applied on stm32-next.

Thanks.
Alex

Quoted 20 lines
  arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 8 ++++++++
  1 file changed, 8 insertions(+)
arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +4 -0
index b99f2b891629..25528a1c096f 100644
@@ -36,6 +36,10 @@ &dac {
  	status = "disabled";
  };
 
+&fmc {
+	status = "disabled";
+};
+
  &gpioa {
  	/*
  	 * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable

arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi &i2c5 { /* On board-to-board connector */ · line 107

Quoted 10 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +4 -0
@@ -94,6 +98,10 @@ &i2c5 {	/* On board-to-board connector */
  	/delete-property/dma-names;
  };
 
+&ksz8851 {
+	status = "disabled";
+};
+
  &usart3 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&usart3_pins_a>;

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel