Skip to contentSkip to conversation

ASoC: rt1015: remove bclk_ratio

RFC PATCH In review Tzung-Bi Shih 2 participants 2 messages Dec 24, 2020 – Jan 5, 2021

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 ASoC: rt1015: remove bclk_ratio

bclk_ratio is unused. Removes bclk_ratio and .set_bclk_ratio callback.

Removes snd_soc_dai_set_bclk_ratio() in a few machine drivers which are obviously using rt1015.

---
The patch applies after the series:
https://mailman.alsa-project.org/pipermail/alsa-devel/2020-December/178608.html
and
https://mailman.alsa-project.org/pipermail/alsa-devel/2020-December/178614.html

 sound/soc/amd/acp3x-rt5682-max9836.c          |  4 +--
 sound/soc/codecs/rt1015.c                     | 28 -------------------
 sound/soc/codecs/rt1015.h                     |  1 -
 sound/soc/intel/boards/sof_rt5682.c           |  7 -----
 .../mediatek/mt8183/mt8183-da7219-max98357.c  |  6 ----
 .../mt8183/mt8183-mt6358-ts3a227-max98357.c   |  6 ----
 .../mt8192/mt8192-mt6359-rt1015-rt5682.c      |  6 ----
 7 files changed, 1 insertion(+), 57 deletions(-)
sound/soc/amd/acp3x-rt5682-max9836.c +1 -3
index 1a4e8ca0f99c..cea320ad0e1c 100644
@@ -140,9 +140,7 @@ static int acp3x_1015_hw_params(struct snd_pcm_substream *substream,
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		if (strcmp(codec_dai->name, "rt1015-aif"))
 			continue;
-		ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64);
-		if (ret < 0)
-			return ret;
+
 		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK,
 						64 * srate, 256 * srate);
 		if (ret < 0)
sound/soc/codecs/rt1015.c +0 -28
index 2dcb7b0fba60..dcb1261bbffa 100644
@@ -884,14 +884,6 @@ static int rt1015_set_component_pll(struct snd_soc_component *component,
 		freq_out == rt1015->pll_out)
 		return 0;
 
-	if (source == RT1015_PLL_S_BCLK) {
-		if (rt1015->bclk_ratio == 0) {
-			dev_err(component->dev,
-				"Can not support bclk ratio as 0.\n");
-			return -EINVAL;
-		}
-	}
-
 	switch (source) {
 	case RT1015_PLL_S_MCLK:
 		snd_soc_component_update_bits(component, RT1015_CLK2,
@@ -931,23 +923,6 @@ static int rt1015_set_component_pll(struct snd_soc_component *component,
 	return 0;
 }
 
-static int rt1015_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
-{
-	struct snd_soc_component *component = dai->component;
-	struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component);
-
-	dev_dbg(component->dev, "%s ratio=%d\n", __func__, ratio);
-
-	rt1015->bclk_ratio = ratio;
-
-	if (ratio == 50) {
-		dev_dbg(component->dev, "Unsupport bclk ratio\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static int rt1015_set_tdm_slot(struct snd_soc_dai *dai,
 	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
 {
@@ -1054,8 +1029,6 @@ static int rt1015_probe(struct snd_soc_component *component)
 		snd_soc_component_get_drvdata(component);
 
 	rt1015->component = component;
-	rt1015->bclk_ratio = 0;
-
 	INIT_DELAYED_WORK(&rt1015->flush_work, rt1015_flush_work);
 
 	return 0;
@@ -1076,7 +1049,6 @@ static void rt1015_remove(struct snd_soc_component *component)
 static struct snd_soc_dai_ops rt1015_aif_dai_ops = {
 	.hw_params = rt1015_hw_params,
 	.set_fmt = rt1015_set_dai_fmt,
-	.set_bclk_ratio = rt1015_set_bclk_ratio,
 	.set_tdm_slot = rt1015_set_tdm_slot,
 };
 
sound/soc/codecs/rt1015.h +0 -1
index e9b498a754e0..2aeaf65ba793 100644
@@ -427,7 +427,6 @@ struct rt1015_priv {
 	struct regmap *regmap;
 	int sysclk;
 	int sysclk_src;
-	int bclk_ratio;
 	int pll_src;
 	int pll_in;
 	int pll_out;
sound/soc/intel/boards/sof_rt5682.c +0 -7
index 8b1ca2da9bb9..55505e207bc0 100644
@@ -323,13 +323,6 @@ static int sof_rt1015_hw_params(struct snd_pcm_substream *substream,
 		fs = 64;
 
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
-		/* Set tdm/i2s1 master bclk ratio */
-		ret = snd_soc_dai_set_bclk_ratio(codec_dai, fs);
-		if (ret < 0) {
-			dev_err(card->dev, "failed to set bclk ratio\n");
-			return ret;
-		}
-
 		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK,
 					  params_rate(params) * fs,
 					  params_rate(params) * 256);
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c +0 -6
index 078e58f1ad0b..870cdfd17fff 100644
@@ -125,12 +125,6 @@ mt8183_da7219_rt1015_i2s_hw_params(struct snd_pcm_substream *substream,
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		if (!strcmp(codec_dai->component->name, RT1015_DEV0_NAME) ||
 		    !strcmp(codec_dai->component->name, RT1015_DEV1_NAME)) {
-			ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64);
-			if (ret) {
-				dev_err(rtd->dev, "failed to set bclk ratio\n");
-				return ret;
-			}
-
 			ret = snd_soc_dai_set_pll(codec_dai, 0,
 						  RT1015_PLL_S_BCLK,
 						  rate * 64, rate * 256);
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c +0 -6
index 8c8340854859..0e4892245035 100644
@@ -68,12 +68,6 @@ mt8183_mt6358_rt1015_i2s_hw_params(struct snd_pcm_substream *substream,
 	int ret, i;
 
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
-		ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64);
-		if (ret < 0) {
-			dev_err(card->dev, "failed to set bclk ratio\n");
-			return ret;
-		}
-
 		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK,
 				rate * 64, rate * 256);
 		if (ret < 0) {
sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c +0 -6
index 716fbb4126b5..a988ce1e58de 100644
@@ -46,12 +46,6 @@ static int mt8192_rt1015_i2s_hw_params(struct snd_pcm_substream *substream,
 	int ret, i;
 
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
-		ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64);
-		if (ret) {
-			dev_err(card->dev, "failed to set bclk ratio\n");
-			return ret;
-		}
-
 		ret = snd_soc_dai_set_pll(codec_dai, 0,
 					  RT1015_PLL_S_BCLK,
 					  params_rate(params) * 64,
Signature · 1 line
2.29.2.729.g45daf8777d-goog
maintainer
#1 lore raw
Quoted 4 lines · Tzung-Bi Shih

bclk_ratio is unused. Removes bclk_ratio and .set_bclk_ratio callback.

Removes snd_soc_dai_set_bclk_ratio() in a few machine drivers which are obviously using rt1015.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: rt1015: remove bclk_ratio

      commit: 81a6320da73ca23f44155715ec3d9e92bea4e35a

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark