dm crypt: export sysfs of kcryptd workqueue - broken dmsetup reload
Hi,
Looks like a2b8b2d975673b1a50ab0bcce5d146b9335edfad broke the ability to reload dm-crypt targets.
I usually used to enable additional flags like this on an existing dm-crypt instance:
ignat@dev:~$ sudo dmsetup table --showkeys test | sed 's/$/ 2 no_read_workqueue no_write_workqueue/' | sudo dmsetup reload test
Now the command fails with below:
device-mapper: reload ioctl on test failed: Cannot allocate memory Command failed.
I also get this in the kernel log:
[ 61.138067][ T2594] sysfs: cannot create duplicate filename '/devices/virtual/workqueue/kcryptd-251:0' [ 61.139949][ T2594] CPU: 0 PID: 2594 Comm: dmsetup Not tainted 5.10.0+ #48 [ 61.141176][ T2594] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 61.142726][ T2594] Call Trace: [ 61.143293][ T2594] dump_stack+0x7d/0xa3 [ 61.144030][ T2594] sysfs_warn_dup.cold+0x17/0x24 [ 61.144897][ T2594] sysfs_create_dir_ns+0x1f3/0x270 [ 61.145844][ T2594] ? sysfs_create_mount_point+0x90/0x90 [ 61.146830][ T2594] ? _raw_spin_lock+0x81/0xd0 [ 61.147674][ T2594] kobject_add_internal+0x2a6/0x860 [ 61.148594][ T2594] ? table_load+0x2d7/0x690 [ 61.149372][ T2594] ? ctl_ioctl+0x3a1/0x950 [ 61.150122][ T2594] kobject_add+0x125/0x190 [ 61.150914][ T2594] ? kset_create_and_add+0x160/0x160 [ 61.151812][ T2594] ? unpoison_range+0x3a/0x60 [ 61.152616][ T2594] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 61.153633][ T2594] ? unpoison_range+0x3a/0x60 [ 61.154459][ T2594] device_add+0x2d7/0x1a40 [ 61.155235][ T2594] ? dev_set_name+0xb0/0xe0 [ 61.156001][ T2594] ? memset+0x20/0x40 [ 61.156680][ T2594] ? __fw_devlink_link_to_suppliers+0x560/0x560 [ 61.157762][ T2594] ? pm_runtime_init+0x2a3/0x380 [ 61.158646][ T2594] workqueue_sysfs_register+0x17e/0x370 [ 61.159593][ T2594] alloc_workqueue+0x559/0xb50 [ 61.160401][ T2594] ? workqueue_sysfs_register+0x370/0x370 [ 61.161387][ T2594] ? sscanf+0xab/0xe0 [ 61.162063][ T2594] ? bioset_init+0x41a/0x710 [ 61.162870][ T2594] crypt_ctr+0x24d5/0x2f90 [ 61.163624][ T2594] ? crypt_ctr_cipher_new.constprop.0+0xa30/0xa30 [ 61.164703][ T2594] ? realloc_argv+0xd2/0x110 [ 61.165492][ T2594] ? dm_table_destroy+0x410/0x410 [ 61.166357][ T2594] dm_table_add_target+0x45d/0xc40 [ 61.167239][ T2594] ? dm_table_create+0xd8/0x320 [ 61.168090][ T2594] ? dm_split_args+0x580/0x580 [ 61.168910][ T2594] ? __mutex_lock_slowpath+0x10/0x10 [ 61.169800][ T2594] ? dm_table_create+0x12b/0x320 [ 61.170651][ T2594] table_load+0x2d7/0x690 [ 61.171395][ T2594] ? __kasan_kmalloc_large+0x89/0xb0 [ 61.172295][ T2594] ? dev_suspend+0x4a0/0x4a0 [ 61.173109][ T2594] ? __kmalloc_node+0x275/0x320 [ 61.173960][ T2594] ? __might_fault+0x4f/0x70 [ 61.174733][ T2594] ctl_ioctl+0x3a1/0x950 [ 61.175492][ T2594] ? dev_suspend+0x4a0/0x4a0 [ 61.176248][ T2594] ? free_params+0x30/0x30 [ 61.176968][ T2594] dm_ctl_ioctl+0xa/0x10 [ 61.177659][ T2594] __x64_sys_ioctl+0x7ff/0x1110 [ 61.178472][ T2594] ? generic_block_fiemap+0x60/0x60 [ 61.179308][ T2594] do_syscall_64+0x33/0x40 [ 61.180045][ T2594] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 61.181007][ T2594] RIP: 0033:0x7f48230e0427 [ 61.181722][ T2594] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 61.184908][ T2594] RSP: 002b:00007ffd1469cb68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 61.186262][ T2594] RAX: ffffffffffffffda RBX: 00007f48231bea7f RCX: 00007f48230e0427 [ 61.187590][ T2594] RDX: 0000556251e1dea0 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 61.188970][ T2594] RBP: 00007ffd1469cc20 R08: 00007f482320d310 R09: 00007ffd1469c9d0 [ 61.190290][ T2594] R10: 00007f482320c65a R11: 0000000000000202 R12: 00007f482320c65a [ 61.191639][ T2594] R13: 00007f482320c65a R14: 00007f482320c65a R15: 00007f482320c65a [ 61.193014][ T2594] kobject_add_internal failed for kcryptd-251:0 with -EEXIST, don't try to register things with the same name in the same directory. [ 61.201542][ T2594] device-mapper: table: 251:0: crypt: Couldn't create kcryptd queue [ 61.203050][ T2594] device-mapper: ioctl: error adding target to table
Seems we're missing a clean-up somewhere, so it tries to create multiple queues.
Regards,
Ignat
--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
Quoted 4 lines · Ignat Korchagin
Hi,
Looks like
a2b8b2d975673b1a50ab0bcce5d146b9335edfadbroke the ability to reload dm-crypt targets.
Hi,
yes, and it breaks completely cryptsetup reencryption and many other functions in cryptsetup.
Nobody apparently tried cryptsetup tests that has a lot of dm-crypt regression tests. It easily detects this problem (at least 4 tests fail now).
Mike, I think the patch above need to be reverted or fixed ASAP. (Also note that this is now part of API, see WQ_SYSFS doc!)
You can easily reproduce this problem with recent cryptsetup (2.3.4 supports mentioned flags already - but it is generic problem with reload):
# echo password | cryptsetup --type plain open <device> test # echo password | cryptsetup refresh --perf-no_read_workqueue test device-mapper: reload ioctl on failed: Cannot allocate memory
While with WQ_SYSFS flag removed (in principle revert of the patch):
# echo password | cryptsetup --type plain open <device> test # echo password | cryptsetup refresh --perf-no_read_workqueue test # cryptsetup status test /dev/mapper/test is active. type: PLAIN ... flags: no_read_workqueue
...
Quoted 1 line
Seems we're missing a clean-up somewhere, so it tries to create multiple queues.
I am afraid it is not so simple, during reload we have two DM table instances (active and inactive), seems both create workqueues and conflicts on sysfs kobject. No idea if there is a WQ API to solve this...
Milan
--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
Sorry for all these issues. Indeed I missed the cryptsetup regression tests before sending the patch. Sadly I didn't know these tests before. It's my fault.
Actually I had sent a fix patch once Ignat reported this issue last week, but it seems the mailing list had missed it somehow. Also I don't see it in the mailing archive.
Since this problematic patch has been reverted in 5.11-rc2, I resend this fix patch to see if there's more elegant way to fix this.
Apologies again.
Following is the fix patch:
[PATCH] dm crypt: fix sysfs name collision when reloading table The table reload routine will create new table, with the old table preserved. In this case, the duplicate name collision will happen when creating the sysfs directory for the workqueue of the newly created table, since the old table has not been destroyed at that time.
One workaround for this issue is to add unique hash string to the name of the sysfs directory. The value of dm_target pointer is used to generate the hash.
This commit also fixes one hidden bug. Prior to this commit, 'devname' is used to compensate the name of the workqueue. 'devname' represents the name of the mapped device, such as '253:0', so there will be name collision if one mapped device corresponds to multiple target devices. Since currently a string hashed from dm_target pointer is added to the name, different target device will have unique name now.
Since then, the exported sysfs directory will be named like 'kcryptd-252:0-3a512302'.
It is worth noting that some details need to be handled specifically. The %p format of printk will print a hexadecimal string after hashing. In 64-bit architecture, the output will be 16 bytes long, with the previous 8 bytes zeroed, such as '00000000abcdef12'. Since the length of the name of workqueue is limited to WQ_NAME_LEN, i.e. 24 bytes, the previous 8 bytes zeroed need to be discarded.
--- drivers/md/dm-crypt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/md/dm-crypt.c +0 -0
@@ -3169,10 +3169,11 @@ static int crypt_ctr(struct dm_target *ti,
unsigned int argc, char **argv)
cc->crypt_queue = alloc_workqueue("kcryptd-%s", WQ_CPU_INTENSIVE |WQ_MEM_RECLAIM,
1, devname);
else
- cc->crypt_queue = alloc_workqueue("kcryptd-%s",
+ cc->crypt_queue = alloc_workqueue("kcryptd-%s-%8p",
WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND | WQ_SYSFS,
- num_online_cpus(), devname);
+ num_online_cpus(), devname, ti);
+
if (!cc->crypt_queue) {
ti->error = "Couldn't create kcryptd queue";
goto bad;
Signature · 1 line
2.27.0
Quoted 103 lines · Ignat Korchagin
Hi,
Looks like
a2b8b2d975673b1a50ab0bcce5d146b9335edfadbroke the ability to reload dm-crypt targets.I usually used to enable additional flags like this on an existing dm-crypt instance:
ignat@dev:~$ sudo dmsetup table --showkeys test | sed 's/$/ 2 no_read_workqueue no_write_workqueue/' | sudo dmsetup reload testNow the command fails with below:
device-mapper: reload ioctl on test failed: Cannot allocate memory Command failed.
I also get this in the kernel log:
[ 61.138067][ T2594] sysfs: cannot create duplicate filename '/devices/virtual/workqueue/kcryptd-251:0' [ 61.139949][ T2594] CPU: 0 PID: 2594 Comm: dmsetup Not tainted 5.10.0+ #48 [ 61.141176][ T2594] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 61.142726][ T2594] Call Trace: [ 61.143293][ T2594] dump_stack+0x7d/0xa3 [ 61.144030][ T2594] sysfs_warn_dup.cold+0x17/0x24 [ 61.144897][ T2594] sysfs_create_dir_ns+0x1f3/0x270 [ 61.145844][ T2594] ? sysfs_create_mount_point+0x90/0x90 [ 61.146830][ T2594] ? _raw_spin_lock+0x81/0xd0 [ 61.147674][ T2594] kobject_add_internal+0x2a6/0x860 [ 61.148594][ T2594] ? table_load+0x2d7/0x690 [ 61.149372][ T2594] ? ctl_ioctl+0x3a1/0x950 [ 61.150122][ T2594] kobject_add+0x125/0x190 [ 61.150914][ T2594] ? kset_create_and_add+0x160/0x160 [ 61.151812][ T2594] ? unpoison_range+0x3a/0x60 [ 61.152616][ T2594] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 61.153633][ T2594] ? unpoison_range+0x3a/0x60 [ 61.154459][ T2594] device_add+0x2d7/0x1a40 [ 61.155235][ T2594] ? dev_set_name+0xb0/0xe0 [ 61.156001][ T2594] ? memset+0x20/0x40 [ 61.156680][ T2594] ? __fw_devlink_link_to_suppliers+0x560/0x560 [ 61.157762][ T2594] ? pm_runtime_init+0x2a3/0x380 [ 61.158646][ T2594] workqueue_sysfs_register+0x17e/0x370 [ 61.159593][ T2594] alloc_workqueue+0x559/0xb50 [ 61.160401][ T2594] ? workqueue_sysfs_register+0x370/0x370 [ 61.161387][ T2594] ? sscanf+0xab/0xe0 [ 61.162063][ T2594] ? bioset_init+0x41a/0x710 [ 61.162870][ T2594] crypt_ctr+0x24d5/0x2f90 [ 61.163624][ T2594] ? crypt_ctr_cipher_new.constprop.0+0xa30/0xa30 [ 61.164703][ T2594] ? realloc_argv+0xd2/0x110 [ 61.165492][ T2594] ? dm_table_destroy+0x410/0x410 [ 61.166357][ T2594] dm_table_add_target+0x45d/0xc40 [ 61.167239][ T2594] ? dm_table_create+0xd8/0x320 [ 61.168090][ T2594] ? dm_split_args+0x580/0x580 [ 61.168910][ T2594] ? __mutex_lock_slowpath+0x10/0x10 [ 61.169800][ T2594] ? dm_table_create+0x12b/0x320 [ 61.170651][ T2594] table_load+0x2d7/0x690 [ 61.171395][ T2594] ? __kasan_kmalloc_large+0x89/0xb0 [ 61.172295][ T2594] ? dev_suspend+0x4a0/0x4a0 [ 61.173109][ T2594] ? __kmalloc_node+0x275/0x320 [ 61.173960][ T2594] ? __might_fault+0x4f/0x70 [ 61.174733][ T2594] ctl_ioctl+0x3a1/0x950 [ 61.175492][ T2594] ? dev_suspend+0x4a0/0x4a0 [ 61.176248][ T2594] ? free_params+0x30/0x30 [ 61.176968][ T2594] dm_ctl_ioctl+0xa/0x10 [ 61.177659][ T2594] __x64_sys_ioctl+0x7ff/0x1110 [ 61.178472][ T2594] ? generic_block_fiemap+0x60/0x60 [ 61.179308][ T2594] do_syscall_64+0x33/0x40 [ 61.180045][ T2594] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 61.181007][ T2594] RIP: 0033:0x7f48230e0427 [ 61.181722][ T2594] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 61.184908][ T2594] RSP: 002b:00007ffd1469cb68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 61.186262][ T2594] RAX: ffffffffffffffda RBX: 00007f48231bea7f RCX: 00007f48230e0427 [ 61.187590][ T2594] RDX: 0000556251e1dea0 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 61.188970][ T2594] RBP: 00007ffd1469cc20 R08: 00007f482320d310 R09: 00007ffd1469c9d0 [ 61.190290][ T2594] R10: 00007f482320c65a R11: 0000000000000202 R12: 00007f482320c65a [ 61.191639][ T2594] R13: 00007f482320c65a R14: 00007f482320c65a R15: 00007f482320c65a [ 61.193014][ T2594] kobject_add_internal failed for kcryptd-251:0 with -EEXIST, don't try to register things with the same name in the same directory. [ 61.201542][ T2594] device-mapper: table: 251:0: crypt: Couldn't create kcryptd queue [ 61.203050][ T2594] device-mapper: ioctl: error adding target to tableSeems we're missing a clean-up somewhere, so it tries to create multiple queues.
Regards,
Ignat--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
Signature · 7 lines
Thanks, Jeffle -- dm-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/dm-devel
PATCH 1/1 dm crypt: fix sysfs name collision when reloading table
In reply to Ignat KorchaginThe table reload routine will create new table, with the old table preserved. In this case, the duplicate name collision will happen when creating the sysfs directory for the workqueue of the newly created table, since the old table has not been destroyed at that time.
One workaround for this issue is to add unique hash string to the name of the sysfs directory. The value of dm_target pointer is used to generate the hash.
This commit also fixes one hidden bug. Prior to this commit, 'devname' is used to compensate the name of the workqueue. 'devname' represents the name of the mapped device, such as '253:0', so there will be name collision if one mapped device corresponds to multiple target devices. Since currently a string hashed from dm_target pointer is added to the name, different target device will have unique name now.
Since then, the exported sysfs directory will be named like 'kcryptd-252:0-3a512302'.
It is worth noting that some details need to be handled specifically. The %p format of printk will print a hexadecimal string after hashing. In 64-bit architecture, the output will be 16 bytes long, with the previous 8 bytes zeroed, such as '00000000abcdef12'. Since the length of the name of workqueue is limited to WQ_NAME_LEN, i.e. 24 bytes, the previous 8 bytes zeroed need to be discarded.
--- drivers/md/dm-crypt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/md/dm-crypt.c +3 -2
@@ -3169,10 +3169,11 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) cc->crypt_queue =alloc_workqueue ("kcryptd-%s" ,WQ_CPU_INTENSIVE |WQ_MEM_RECLAIM ,1 , devname); else - cc->crypt_queue = alloc_workqueue("kcryptd-%s", + cc->crypt_queue = alloc_workqueue("kcryptd-%s-%8p",WQ_CPU_INTENSIVE |WQ_MEM_RECLAIM |WQ_UNBOUND |WQ_SYSFS , -num_online_cpus (), devname); +num_online_cpus (), devname, ti); +if (!cc->crypt_queue) { ti->error ="Couldn't create kcryptd queue" ; goto bad;
Signature · 6 lines
2.27.0 -- dm-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/dm-devel
Sorry for the bug.
It seems that the reload table routine will create new table prior to destroying old table, in which case the duplicate sysfs name collision happens when creating the new table.
Maybe we could add a hash string (hashed from the address of struct dm_table) as part of the sysfs name such as kcryptd-252:0-dsfggfh..., since the value of 'struct dm_table *' differs at that time. But I wonder it may not be acceptable to export such nonsense hash string to the user space....
Quoted 103 lines · Ignat Korchagin
Hi,
Looks like
a2b8b2d975673b1a50ab0bcce5d146b9335edfadbroke the ability to reload dm-crypt targets.I usually used to enable additional flags like this on an existing dm-crypt instance:
ignat@dev:~$ sudo dmsetup table --showkeys test | sed 's/$/ 2 no_read_workqueue no_write_workqueue/' | sudo dmsetup reload testNow the command fails with below:
device-mapper: reload ioctl on test failed: Cannot allocate memory Command failed.
I also get this in the kernel log:
[ 61.138067][ T2594] sysfs: cannot create duplicate filename '/devices/virtual/workqueue/kcryptd-251:0' [ 61.139949][ T2594] CPU: 0 PID: 2594 Comm: dmsetup Not tainted 5.10.0+ #48 [ 61.141176][ T2594] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 61.142726][ T2594] Call Trace: [ 61.143293][ T2594] dump_stack+0x7d/0xa3 [ 61.144030][ T2594] sysfs_warn_dup.cold+0x17/0x24 [ 61.144897][ T2594] sysfs_create_dir_ns+0x1f3/0x270 [ 61.145844][ T2594] ? sysfs_create_mount_point+0x90/0x90 [ 61.146830][ T2594] ? _raw_spin_lock+0x81/0xd0 [ 61.147674][ T2594] kobject_add_internal+0x2a6/0x860 [ 61.148594][ T2594] ? table_load+0x2d7/0x690 [ 61.149372][ T2594] ? ctl_ioctl+0x3a1/0x950 [ 61.150122][ T2594] kobject_add+0x125/0x190 [ 61.150914][ T2594] ? kset_create_and_add+0x160/0x160 [ 61.151812][ T2594] ? unpoison_range+0x3a/0x60 [ 61.152616][ T2594] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 61.153633][ T2594] ? unpoison_range+0x3a/0x60 [ 61.154459][ T2594] device_add+0x2d7/0x1a40 [ 61.155235][ T2594] ? dev_set_name+0xb0/0xe0 [ 61.156001][ T2594] ? memset+0x20/0x40 [ 61.156680][ T2594] ? __fw_devlink_link_to_suppliers+0x560/0x560 [ 61.157762][ T2594] ? pm_runtime_init+0x2a3/0x380 [ 61.158646][ T2594] workqueue_sysfs_register+0x17e/0x370 [ 61.159593][ T2594] alloc_workqueue+0x559/0xb50 [ 61.160401][ T2594] ? workqueue_sysfs_register+0x370/0x370 [ 61.161387][ T2594] ? sscanf+0xab/0xe0 [ 61.162063][ T2594] ? bioset_init+0x41a/0x710 [ 61.162870][ T2594] crypt_ctr+0x24d5/0x2f90 [ 61.163624][ T2594] ? crypt_ctr_cipher_new.constprop.0+0xa30/0xa30 [ 61.164703][ T2594] ? realloc_argv+0xd2/0x110 [ 61.165492][ T2594] ? dm_table_destroy+0x410/0x410 [ 61.166357][ T2594] dm_table_add_target+0x45d/0xc40 [ 61.167239][ T2594] ? dm_table_create+0xd8/0x320 [ 61.168090][ T2594] ? dm_split_args+0x580/0x580 [ 61.168910][ T2594] ? __mutex_lock_slowpath+0x10/0x10 [ 61.169800][ T2594] ? dm_table_create+0x12b/0x320 [ 61.170651][ T2594] table_load+0x2d7/0x690 [ 61.171395][ T2594] ? __kasan_kmalloc_large+0x89/0xb0 [ 61.172295][ T2594] ? dev_suspend+0x4a0/0x4a0 [ 61.173109][ T2594] ? __kmalloc_node+0x275/0x320 [ 61.173960][ T2594] ? __might_fault+0x4f/0x70 [ 61.174733][ T2594] ctl_ioctl+0x3a1/0x950 [ 61.175492][ T2594] ? dev_suspend+0x4a0/0x4a0 [ 61.176248][ T2594] ? free_params+0x30/0x30 [ 61.176968][ T2594] dm_ctl_ioctl+0xa/0x10 [ 61.177659][ T2594] __x64_sys_ioctl+0x7ff/0x1110 [ 61.178472][ T2594] ? generic_block_fiemap+0x60/0x60 [ 61.179308][ T2594] do_syscall_64+0x33/0x40 [ 61.180045][ T2594] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 61.181007][ T2594] RIP: 0033:0x7f48230e0427 [ 61.181722][ T2594] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 61.184908][ T2594] RSP: 002b:00007ffd1469cb68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 61.186262][ T2594] RAX: ffffffffffffffda RBX: 00007f48231bea7f RCX: 00007f48230e0427 [ 61.187590][ T2594] RDX: 0000556251e1dea0 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 61.188970][ T2594] RBP: 00007ffd1469cc20 R08: 00007f482320d310 R09: 00007ffd1469c9d0 [ 61.190290][ T2594] R10: 00007f482320c65a R11: 0000000000000202 R12: 00007f482320c65a [ 61.191639][ T2594] R13: 00007f482320c65a R14: 00007f482320c65a R15: 00007f482320c65a [ 61.193014][ T2594] kobject_add_internal failed for kcryptd-251:0 with -EEXIST, don't try to register things with the same name in the same directory. [ 61.201542][ T2594] device-mapper: table: 251:0: crypt: Couldn't create kcryptd queue [ 61.203050][ T2594] device-mapper: ioctl: error adding target to tableSeems we're missing a clean-up somewhere, so it tries to create multiple queues.
Regards,
Ignat--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
Signature · 7 lines
Thanks, Jeffle -- dm-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/dm-devel