Skip to contentSkip to conversation

selinux: add option to control checking of reply messages

RFC PATCH In review Christian Göttsche 3 participants 4 messages Dec 28, 2020 – Jan 4, 2021 SELinux security module

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 selinux: add option to control checking of reply messages

Currently all reply messages are checked with the same SELinux permission as request messages ("send_mesg").
Add an option <replycheck> to be able to use a distinc SELinux permission for reply messages.

Upstream Merge Request: https://gitlab.freedesktop.org/dbus/dbus/-/merge_requests/199

---
 bus/bus.c                               | 26 +++++++++++++
 bus/bus.h                               |  1 +
 bus/config-parser-common.c              |  6 +++
 bus/config-parser-common.h              |  1 +
 bus/config-parser-trivial.c             | 29 ++++++++++++++
 bus/config-parser.c                     | 50 ++++++++++++++++++++++++-
 bus/config-parser.h                     |  1 +
 bus/selinux.c                           | 39 ++++++++++++++++++-
 bus/selinux.h                           |  3 ++
 doc/busconfig.dtd                       |  4 +-
 doc/dbus-daemon.1.xml.in                | 21 ++++++++++-
 test/data/valid-config-files/basic.conf |  1 +
 12 files changed, 177 insertions(+), 5 deletions(-)
bus/bus.c +26 -0
index db20bbbc..3f4c1ef6 100644
@@ -57,6 +57,7 @@ struct BusContext
   char *config_file;
   char *type;
   char *servicehelper;
+  char *replycheck_verb;
   char *address;
   char *pidfile;
   char *user;
@@ -568,6 +569,7 @@ process_config_every_time (BusContext      *context,
   DBusList **dirs;
   char *addr;
   const char *servicehelper;
+  const char *replycheck_verb;
   char *s;
 
   dbus_bool_t retval;
@@ -664,6 +666,21 @@ process_config_every_time (BusContext      *context,
       context->servicehelper = s;
     }
 
+  /* and the replycheck */
+  replycheck_verb = bus_selinux_convert_replycheck_option (bus_config_parser_get_replycheck (parser));
+
+  s = _dbus_strdup(replycheck_verb);
+  if (s == NULL && replycheck_verb != NULL)
+    {
+      BUS_SET_OOM (error);
+      goto failed;
+    }
+  else
+    {
+      dbus_free(context->replycheck_verb);
+      context->replycheck_verb = s;
+    }
+
   /* Create activation subsystem */
   if (context->activation)
     {
@@ -1222,6 +1239,7 @@ bus_context_unref (BusContext *context)
       dbus_free (context->address);
       dbus_free (context->user);
       dbus_free (context->servicehelper);
+      dbus_free (context->replycheck_verb);
 
       if (context->pidfile)
 	{
@@ -1264,6 +1282,12 @@ bus_context_get_servicehelper (BusContext *context)
   return context->servicehelper;
 }
 
+const char*
+bus_context_get_replycheck_verb (BusContext *context)
+{
+    return context->replycheck_verb;
+}
+
 dbus_bool_t
 bus_context_get_systemd_activation (BusContext *context)
 {
@@ -1677,6 +1701,8 @@ bus_context_check_security_policy (BusContext     *context,
        * go on with the standard checks.
        */
       if (!bus_selinux_allows_send (sender, proposed_recipient,
+                                    requested_reply,
+                                    bus_context_get_replycheck_verb (context),
                                     dbus_message_type_to_string (dbus_message_get_type (message)),
                                     dbus_message_get_interface (message),
                                     dbus_message_get_member (message),
bus/bus.h +1 -0
index 99625ca3..5c8d8dcf 100644
@@ -100,6 +100,7 @@ dbus_bool_t       bus_context_get_id                             (BusContext
 const char*       bus_context_get_type                           (BusContext       *context);
 const char*       bus_context_get_address                        (BusContext       *context);
 const char*       bus_context_get_servicehelper                  (BusContext       *context);
+const char*       bus_context_get_replycheck_verb                (BusContext       *context);
 dbus_bool_t       bus_context_get_systemd_activation             (BusContext       *context);
 BusRegistry*      bus_context_get_registry                       (BusContext       *context);
 BusConnections*   bus_context_get_connections                    (BusContext       *context);
bus/config-parser-common.c +6 -0
index 627c9013..ec069bf3 100644
@@ -115,6 +115,10 @@ bus_config_parser_element_name_to_type (const char *name)
     {
       return ELEMENT_ASSOCIATE;
     }
+  else if (strcmp (name, "replycheck") == 0)
+    {
+        return ELEMENT_REPLYCHECK;
+    }
   else if (strcmp (name, "syslog") == 0)
     {
       return ELEMENT_SYSLOG;
@@ -179,6 +183,8 @@ bus_config_parser_element_type_to_name (ElementType type)
       return "selinux";
     case ELEMENT_ASSOCIATE:
       return "associate";
+    case ELEMENT_REPLYCHECK:
+        return "replycheck";
     case ELEMENT_SYSLOG:
       return "syslog";
     case ELEMENT_KEEP_UMASK:
bus/config-parser-common.h +1 -0
index 1c601e97..b2e58579 100644
@@ -45,6 +45,7 @@ typedef enum
   ELEMENT_CONFIGTYPE,
   ELEMENT_SELINUX,
   ELEMENT_ASSOCIATE,
+  ELEMENT_REPLYCHECK,
   ELEMENT_STANDARD_SESSION_SERVICEDIRS,
   ELEMENT_STANDARD_SYSTEM_SERVICEDIRS,
   ELEMENT_KEEP_UMASK,
bus/config-parser-trivial.c +29 -0
index 9a2087cf..8d74f6bc 100644
@@ -40,6 +40,7 @@ struct BusConfigParser
   DBusString user;                  /**< User the dbus-daemon runs as */
   DBusString bus_type;              /**< Message bus type */
   DBusString service_helper;        /**< Location of the setuid helper */
+  DBusString replycheck;            /**< SELinux checking of reply messages */
   DBusList *service_dirs;           /**< Directories to look for services in */
 };
 
@@ -101,11 +102,15 @@ bus_config_parser_new (const DBusString             *basedir,
     goto failed_type;
   if (!_dbus_string_init (&parser->service_helper))
     goto failed_helper;
+  if (!_dbus_string_init (&parser->replycheck))
+    goto failed_reply;
 
   /* woot! */
   return parser;
 
 /* argh. we have do do this carefully because of OOM */
+failed_reply:
+  _dbus_string_free (&parser->service_helper);
 failed_helper:
   _dbus_string_free (&parser->bus_type);
 failed_type:
@@ -121,6 +126,7 @@ bus_config_parser_unref (BusConfigParser *parser)
 {
   _dbus_string_free (&parser->user);
   _dbus_string_free (&parser->service_helper);
+  _dbus_string_free (&parser->replycheck);
   _dbus_string_free (&parser->bus_type);
   _dbus_list_clear_full (&parser->service_dirs, dbus_free);
   dbus_free (parser);
@@ -142,6 +148,7 @@ bus_config_parser_start_element (BusConfigParser   *parser,
     case ELEMENT_SERVICEHELPER:
     case ELEMENT_USER:
     case ELEMENT_CONFIGTYPE:
+    case ELEMENT_REPLYCHECK:
       /* content about to be handled */
       break;
 
@@ -284,6 +291,28 @@ bus_config_parser_content (BusConfigParser   *parser,
       }
       break;
 
+    case ELEMENT_REPLYCHECK:
+      {
+        const char* content_string;
+        if (!_dbus_string_copy (&content_sane, 0, &parser->replycheck, 0))
+          {
+            BUS_SET_OOM (error);
+            goto out_content;
+          }
+
+          content_string = _dbus_string_get_const_data (&content_sane);
+          if (strcmp(content_string, "none") != 0 &&
+            strcmp(content_string, "send") != 0 &&
+            strcmp(content_string, "reply_with_fallback") != 0 &&
+            strcmp(content_string, "reply") != 0)
+            {
+              dbus_set_error (error, DBUS_ERROR_FAILED,
+                              "Element <replycheck> has invalid content %s", content_string);
+              goto out_content;
+            }
+      }
+      break;
+
     case ELEMENT_NONE:
     case ELEMENT_BUSCONFIG:
     case ELEMENT_INCLUDE:
bus/config-parser.c +49 -1

110 lines not on this page · raw message

bus/config-parser.h +1 -0
index 7f4d2f47..7a79d698 100644
@@ -65,6 +65,7 @@ dbus_bool_t bus_config_parser_get_syslog       (BusConfigParser *parser);
 dbus_bool_t bus_config_parser_get_keep_umask   (BusConfigParser *parser);
 const char* bus_config_parser_get_pidfile      (BusConfigParser *parser);
 const char* bus_config_parser_get_servicehelper (BusConfigParser *parser);
+const char* bus_config_parser_get_replycheck   (BusConfigParser *parser);
 DBusList**  bus_config_parser_get_service_dirs (BusConfigParser *parser);
 DBusList**  bus_config_parser_get_conf_dirs    (BusConfigParser *parser);
 BusPolicy*  bus_config_parser_steal_policy     (BusConfigParser *parser);
bus/selinux.c +37 -2
index 42017e7a..8672e083 100644
@@ -378,6 +378,7 @@ error:
  * granted from the connection to the message bus or to another
  * optionally supplied security identifier (e.g. for a service
  * context).  Currently these permissions are either send_msg or
+ * reply_msg (depending in the replycheck configuration) or
  * acquire_svc in the dbus class.
  *
  * @param sender_sid source security context
@@ -534,6 +535,8 @@ bus_selinux_allows_acquire_service (DBusConnection     *connection,
 dbus_bool_t
 bus_selinux_allows_send (DBusConnection     *sender,
                          DBusConnection     *proposed_recipient,
+			 dbus_bool_t        requested_reply,
+			 const char         *replycheck_verb,
 			 const char         *msgtype,
 			 const char         *interface,
 			 const char         *member,
@@ -557,6 +560,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
   if (activation_entry)
     return TRUE;
 
+  /* Skip check on reply messages. */
+  if (requested_reply && !replycheck_verb)
+    return TRUE;
+
   if (!sender || !dbus_connection_get_unix_process_id (sender, &spid))
     spid = 0;
   if (!proposed_recipient || !dbus_connection_get_unix_process_id (proposed_recipient, &tpid))
@@ -631,10 +638,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
   else
     recipient_sid = BUS_SID_FROM_SELINUX (bus_sid);
 
-  ret = bus_selinux_check (sender_sid, 
+  ret = bus_selinux_check (sender_sid,
 			   recipient_sid,
 			   "dbus",
-			   "send_msg",
+			   requested_reply ? replycheck_verb : "send_msg",
 			   &auxdata);
 
   _dbus_string_free (&auxdata);
@@ -1004,3 +1011,31 @@ bus_selinux_shutdown (void)
     }
 #endif /* HAVE_SELINUX */
 }
+
+/**
+ * Convert the replycheck configuraion string into the SELinux permission verb.
+ */
+const char*
+bus_selinux_convert_replycheck_option(const char *replycheck_option)
+{
+#ifdef HAVE_SELINUX
+    security_class_t security_class;
+
+    if (replycheck_option && strcmp (replycheck_option, "none") == 0)
+      return NULL;
+
+    if (replycheck_option && strcmp (replycheck_option, "send") == 0)
+      return "send_msg";
+
+    if (replycheck_option && strcmp (replycheck_option, "reply") == 0)
+      return "reply_msg";
+
+    security_class = string_to_security_class ("dbus");
+    if (security_class != 0 && string_to_av_perm (security_class, "reply_msg") != 0)
+      return "reply_msg";
+
+    return "send_msg";
+#else
+    return NULL;
+#endif /* HAVE_SELINUX */
+}
bus/selinux.h +3 -0
index 471f2629..f6b8e43d 100644
@@ -55,6 +55,8 @@ dbus_bool_t bus_selinux_allows_acquire_service (DBusConnection *connection,
 
 dbus_bool_t bus_selinux_allows_send            (DBusConnection *sender,
                                                 DBusConnection *proposed_recipient,
+						dbus_bool_t    requested_reply,
+						const char     *replycheck_verb,
 						const char     *msgtype, /* Supplementary audit data */
 						const char     *interface,
 						const char     *member,
@@ -66,4 +68,5 @@ dbus_bool_t bus_selinux_allows_send            (DBusConnection *sender,
 BusSELinuxID* bus_selinux_init_connection_id (DBusConnection *connection,
                                               DBusError      *error);
 
+const char* bus_selinux_convert_replycheck_option(const char *replycheck_option);
 #endif /* BUS_SELINUX_H */
doc/busconfig.dtd +3 -1
index 8c5ac334..d8855b1e 100644
@@ -59,11 +59,13 @@
 <!ELEMENT limit (#PCDATA)>
 <!ATTLIST limit name CDATA #REQUIRED>
 
-<!ELEMENT selinux (associate)*>
+<!ELEMENT selinux (associate|
+                   replycheck)*>
 <!ELEMENT associate EMPTY>
 <!ATTLIST associate
           own CDATA #REQUIRED
           context CDATA #REQUIRED>
+<!ELEMENT replycheck (#PCDATA)>
 
 <!ELEMENT apparmor EMPTY>
 <!ATTLIST apparmor
doc/dbus-daemon.1.xml.in +20 -1
index a9c0b5d5..62c3e334 100644
@@ -1154,6 +1154,7 @@ More details below.</para>
 <itemizedlist remap='TP'>
 
   <listitem><para><emphasis remap='I'>&lt;associate&gt;</emphasis></para></listitem>
+  <listitem><para><emphasis remap='I'>&lt;replycheck&gt;</emphasis></para></listitem>
 
 
 </itemizedlist>
@@ -1187,6 +1188,23 @@ Right now the default will be the security context of the bus itself.</para>
 <para>If two &lt;associate&gt; elements specify the same name, the element
 appearing later in the configuration file will be used.</para>
 
+
+<para>The &lt;replycheck&gt; element controls how reply messages are checked.
+There are four options:</para>
+<literallayout remap='.nf'>
+      "send"                       : the same SELinux permission as for request
+                                     messages is used (the previous default)
+      "none"                       : reply messages are not checked
+      "reply"                      : reply messages are checked with a distinct
+                                     SELinux permission
+      "reply_with_fallback"        : reply messages are checked with a distinct
+                                     SELinux permission, if this permission is
+                                     defined in the loaded SELinux policy.
+                                     Otherwise the same permission as for request
+                                     messages is used
+</literallayout> <!-- .fi -->
+
+
 <itemizedlist remap='TP'>
 
   <listitem><para><emphasis remap='I'>&lt;apparmor&gt;</emphasis></para></listitem>
@@ -1425,7 +1443,8 @@ that class.</para>
 <para>First, any time a message is routed from one connection to another
 connection, the bus daemon will check permissions with the security context of
 the first connection as source, security context of the second connection
-as target, object class "dbus" and requested permission "send_msg".</para>
+as target, object class "dbus" and requested permission "send_msg" or "reply_msg",
+depending on the message type and the &lt;replycheck&gt; setting.</para>
 
 
 <para>If a security context is not available for a connection
test/data/valid-config-files/basic.conf +1 -0
index 5297097d..de68caaf 100644
@@ -27,6 +27,7 @@
          context="my_selinux_context_t"/>
         <associate own="org.freedesktop.BlahBlahBlah"
          context="foo_t"/>
+        <replycheck>reply_with_fallback</replycheck>
   </selinux>
 
 </busconfig>
Signature · 1 line
2.30.0.rc2
#1 lore raw
Quoted 4 lines · Christian Göttsche

Currently all reply messages are checked with the same SELinux permission as request messages ("send_mesg").
Add an option <replycheck> to be able to use a distinc SELinux permission for reply messages.

This has bugged me for a long time. Is there ever a reason where a reply should be denied? Does dbus have any methods where a 1-way message can work?

Quoted 519 lines

Upstream Merge Request: https://gitlab.freedesktop.org/dbus/dbus/-/merge_requests/199

---
  bus/bus.c                               | 26 +++++++++++++
  bus/bus.h                               |  1 +
  bus/config-parser-common.c              |  6 +++
  bus/config-parser-common.h              |  1 +
  bus/config-parser-trivial.c             | 29 ++++++++++++++
  bus/config-parser.c                     | 50 ++++++++++++++++++++++++-
  bus/config-parser.h                     |  1 +
  bus/selinux.c                           | 39 ++++++++++++++++++-
  bus/selinux.h                           |  3 ++
  doc/busconfig.dtd                       |  4 +-
  doc/dbus-daemon.1.xml.in                | 21 ++++++++++-
  test/data/valid-config-files/basic.conf |  1 +
  12 files changed, 177 insertions(+), 5 deletions(-)
bus/bus.c +26 -0
index db20bbbc..3f4c1ef6 100644
@@ -57,6 +57,7 @@ struct BusContext
    char *config_file;
    char *type;
    char *servicehelper;
+  char *replycheck_verb;
    char *address;
    char *pidfile;
    char *user;
@@ -568,6 +569,7 @@ process_config_every_time (BusContext      *context,
    DBusList **dirs;
    char *addr;
    const char *servicehelper;
+  const char *replycheck_verb;
    char *s;
 
    dbus_bool_t retval;
@@ -664,6 +666,21 @@ process_config_every_time (BusContext      *context,
        context->servicehelper = s;
      }
 
+  /* and the replycheck */
+  replycheck_verb = bus_selinux_convert_replycheck_option (bus_config_parser_get_replycheck (parser));
+
+  s = _dbus_strdup(replycheck_verb);
+  if (s == NULL && replycheck_verb != NULL)
+    {
+      BUS_SET_OOM (error);
+      goto failed;
+    }
+  else
+    {
+      dbus_free(context->replycheck_verb);
+      context->replycheck_verb = s;
+    }
+
    /* Create activation subsystem */
    if (context->activation)
      {
@@ -1222,6 +1239,7 @@ bus_context_unref (BusContext *context)
        dbus_free (context->address);
        dbus_free (context->user);
        dbus_free (context->servicehelper);
+      dbus_free (context->replycheck_verb);
 
        if (context->pidfile)
  	{
@@ -1264,6 +1282,12 @@ bus_context_get_servicehelper (BusContext *context)
    return context->servicehelper;
  }
 
+const char*
+bus_context_get_replycheck_verb (BusContext *context)
+{
+    return context->replycheck_verb;
+}
+
  dbus_bool_t
  bus_context_get_systemd_activation (BusContext *context)
  {
@@ -1677,6 +1701,8 @@ bus_context_check_security_policy (BusContext     *context,
         * go on with the standard checks.
         */
        if (!bus_selinux_allows_send (sender, proposed_recipient,
+                                    requested_reply,
+                                    bus_context_get_replycheck_verb (context),
                                      dbus_message_type_to_string (dbus_message_get_type (message)),
                                      dbus_message_get_interface (message),
                                      dbus_message_get_member (message),
bus/bus.h +1 -0
index 99625ca3..5c8d8dcf 100644
@@ -100,6 +100,7 @@ dbus_bool_t       bus_context_get_id                             (BusContext
  const char*       bus_context_get_type                           (BusContext       *context);
  const char*       bus_context_get_address                        (BusContext       *context);
  const char*       bus_context_get_servicehelper                  (BusContext       *context);
+const char*       bus_context_get_replycheck_verb                (BusContext       *context);
  dbus_bool_t       bus_context_get_systemd_activation             (BusContext       *context);
  BusRegistry*      bus_context_get_registry                       (BusContext       *context);
  BusConnections*   bus_context_get_connections                    (BusContext       *context);
bus/config-parser-common.c +6 -0
index 627c9013..ec069bf3 100644
@@ -115,6 +115,10 @@ bus_config_parser_element_name_to_type (const char *name)
      {
        return ELEMENT_ASSOCIATE;
      }
+  else if (strcmp (name, "replycheck") == 0)
+    {
+        return ELEMENT_REPLYCHECK;
+    }
    else if (strcmp (name, "syslog") == 0)
      {
        return ELEMENT_SYSLOG;
@@ -179,6 +183,8 @@ bus_config_parser_element_type_to_name (ElementType type)
        return "selinux";
      case ELEMENT_ASSOCIATE:
        return "associate";
+    case ELEMENT_REPLYCHECK:
+        return "replycheck";
      case ELEMENT_SYSLOG:
        return "syslog";
      case ELEMENT_KEEP_UMASK:
bus/config-parser-common.h +1 -0
index 1c601e97..b2e58579 100644
@@ -45,6 +45,7 @@ typedef enum
    ELEMENT_CONFIGTYPE,
    ELEMENT_SELINUX,
    ELEMENT_ASSOCIATE,
+  ELEMENT_REPLYCHECK,
    ELEMENT_STANDARD_SESSION_SERVICEDIRS,
    ELEMENT_STANDARD_SYSTEM_SERVICEDIRS,
    ELEMENT_KEEP_UMASK,
bus/config-parser-trivial.c +29 -0
index 9a2087cf..8d74f6bc 100644
@@ -40,6 +40,7 @@ struct BusConfigParser
    DBusString user;                  /**< User the dbus-daemon runs as */
    DBusString bus_type;              /**< Message bus type */
    DBusString service_helper;        /**< Location of the setuid helper */
+  DBusString replycheck;            /**< SELinux checking of reply messages */
    DBusList *service_dirs;           /**< Directories to look for services in */
  };
 
@@ -101,11 +102,15 @@ bus_config_parser_new (const DBusString             *basedir,
      goto failed_type;
    if (!_dbus_string_init (&parser->service_helper))
      goto failed_helper;
+  if (!_dbus_string_init (&parser->replycheck))
+    goto failed_reply;
 
    /* woot! */
    return parser;
 
  /* argh. we have do do this carefully because of OOM */
+failed_reply:
+  _dbus_string_free (&parser->service_helper);
  failed_helper:
    _dbus_string_free (&parser->bus_type);
  failed_type:
@@ -121,6 +126,7 @@ bus_config_parser_unref (BusConfigParser *parser)
  {
    _dbus_string_free (&parser->user);
    _dbus_string_free (&parser->service_helper);
+  _dbus_string_free (&parser->replycheck);
    _dbus_string_free (&parser->bus_type);
    _dbus_list_clear_full (&parser->service_dirs, dbus_free);
    dbus_free (parser);
@@ -142,6 +148,7 @@ bus_config_parser_start_element (BusConfigParser   *parser,
      case ELEMENT_SERVICEHELPER:
      case ELEMENT_USER:
      case ELEMENT_CONFIGTYPE:
+    case ELEMENT_REPLYCHECK:
        /* content about to be handled */
        break;
 
@@ -284,6 +291,28 @@ bus_config_parser_content (BusConfigParser   *parser,
        }
        break;
 
+    case ELEMENT_REPLYCHECK:
+      {
+        const char* content_string;
+        if (!_dbus_string_copy (&content_sane, 0, &parser->replycheck, 0))
+          {
+            BUS_SET_OOM (error);
+            goto out_content;
+          }
+
+          content_string = _dbus_string_get_const_data (&content_sane);
+          if (strcmp(content_string, "none") != 0 &&
+            strcmp(content_string, "send") != 0 &&
+            strcmp(content_string, "reply_with_fallback") != 0 &&
+            strcmp(content_string, "reply") != 0)
+            {
+              dbus_set_error (error, DBUS_ERROR_FAILED,
+                              "Element <replycheck> has invalid content %s", content_string);
+              goto out_content;
+            }
+      }
+      break;
+
      case ELEMENT_NONE:
      case ELEMENT_BUSCONFIG:
      case ELEMENT_INCLUDE:
bus/config-parser.c +49 -1
index f9b70477..39b673cd 100644
@@ -115,6 +115,8 @@ struct BusConfigParser
 
    DBusHashTable *service_context_table; /**< Map service names to SELinux contexts */
 
+  char *replycheck;      /**< What permission verb to use on message replies */
+
    unsigned int fork : 1; /**< TRUE to fork into daemon mode */
 
    unsigned int syslog : 1; /**< TRUE to enable syslog */
@@ -402,6 +404,13 @@ merge_included (BusConfigParser *parser,
        included->servicehelper = NULL;
      }
 
+  if (included->replycheck != NULL)
+    {
+      dbus_free (parser->replycheck);
+      parser->replycheck = included->replycheck;
+      included->replycheck = NULL;
+    }
+
    while ((link = _dbus_list_pop_first_link (&included->listen_on)))
      _dbus_list_append_link (&parser->listen_on, link);
 
@@ -585,6 +594,7 @@ bus_config_parser_unref (BusConfigParser *parser)
        dbus_free (parser->servicehelper);
        dbus_free (parser->bus_type);
        dbus_free (parser->pidfile);
+      dbus_free (parser->replycheck);
 
        _dbus_list_clear_full (&parser->listen_on, dbus_free);
        _dbus_list_clear_full (&parser->service_dirs,
@@ -1977,6 +1987,19 @@ start_selinux_child (BusConfigParser   *parser,
  					   own_copy, context_copy))
          goto oom;
 
+      return TRUE;
+    }
+  else if (strcmp (element_name, "replycheck") == 0)
+    {
+      if (!check_no_attributes (parser, "replycheck", attribute_names, attribute_values, error))
+          return FALSE;
+
+      if (push_element (parser, ELEMENT_REPLYCHECK) == NULL)
+        {
+          BUS_SET_OOM (error);
+          return FALSE;
+        }
+
        return TRUE;
      }
    else
@@ -2277,6 +2300,7 @@ bus_config_parser_end_element (BusConfigParser   *parser,
      case ELEMENT_SERVICEHELPER:
      case ELEMENT_INCLUDEDIR:
      case ELEMENT_LIMIT:
+    case ELEMENT_REPLYCHECK:
        if (!e->had_content)
          {
            dbus_set_error (error, DBUS_ERROR_FAILED,
@@ -2870,6 +2894,20 @@ bus_config_parser_content (BusConfigParser   *parser,
                         e->d.limit.name);
        }
        break;
+
+    case ELEMENT_REPLYCHECK:
+      {
+        char *s;
+
+        e->had_content = TRUE;
+
+        if (!_dbus_string_copy_data (content, &s))
+            goto nomem;
+
+        dbus_free (parser->replycheck);
+        parser->replycheck = s;
+      }
+      break;
      }
 
    _DBUS_ASSERT_ERROR_IS_CLEAR (error);
@@ -2977,6 +3015,12 @@ bus_config_parser_get_servicehelper (BusConfigParser   *parser)
    return parser->servicehelper;
  }
 
+const char *
+bus_config_parser_get_replycheck (BusConfigParser   *parser)
+{
+    return parser->replycheck;
+}
+
  BusPolicy*
  bus_config_parser_steal_policy (BusConfigParser *parser)
  {
@@ -3371,6 +3415,7 @@ elements_equal (const Element *a,
      case ELEMENT_CONFIGTYPE:
      case ELEMENT_SELINUX:
      case ELEMENT_ASSOCIATE:
+    case ELEMENT_REPLYCHECK:
      case ELEMENT_STANDARD_SESSION_SERVICEDIRS:
      case ELEMENT_STANDARD_SYSTEM_SERVICEDIRS:
      case ELEMENT_KEEP_UMASK:
@@ -3501,7 +3546,7 @@ config_parsers_equal (const BusConfigParser *a,
 
    if (!lists_of_service_dirs_equal (a->service_dirs, b->service_dirs))
      return FALSE;
-
+
    /* FIXME: compare policy */
 
    /* FIXME: compare service selinux ID table */
@@ -3512,6 +3557,9 @@ config_parsers_equal (const BusConfigParser *a,
    if (!strings_equal_or_both_null (a->pidfile, b->pidfile))
      return FALSE;
 
+  if (!strings_equal_or_both_null (a->replycheck, b->replycheck))
+    return FALSE;
+
    if (! bools_equal (a->fork, b->fork))
      return FALSE;
 
bus/config-parser.h +1 -0
index 7f4d2f47..7a79d698 100644
@@ -65,6 +65,7 @@ dbus_bool_t bus_config_parser_get_syslog       (BusConfigParser *parser);
  dbus_bool_t bus_config_parser_get_keep_umask   (BusConfigParser *parser);
  const char* bus_config_parser_get_pidfile      (BusConfigParser *parser);
  const char* bus_config_parser_get_servicehelper (BusConfigParser *parser);
+const char* bus_config_parser_get_replycheck   (BusConfigParser *parser);
  DBusList**  bus_config_parser_get_service_dirs (BusConfigParser *parser);
  DBusList**  bus_config_parser_get_conf_dirs    (BusConfigParser *parser);
  BusPolicy*  bus_config_parser_steal_policy     (BusConfigParser *parser);
bus/selinux.c +37 -2
index 42017e7a..8672e083 100644
@@ -378,6 +378,7 @@ error:
   * granted from the connection to the message bus or to another
   * optionally supplied security identifier (e.g. for a service
   * context).  Currently these permissions are either send_msg or
+ * reply_msg (depending in the replycheck configuration) or
   * acquire_svc in the dbus class.
   *
   * @param sender_sid source security context
@@ -534,6 +535,8 @@ bus_selinux_allows_acquire_service (DBusConnection     *connection,
  dbus_bool_t
  bus_selinux_allows_send (DBusConnection     *sender,
                           DBusConnection     *proposed_recipient,
+			 dbus_bool_t        requested_reply,
+			 const char         *replycheck_verb,
  			 const char         *msgtype,
  			 const char         *interface,
  			 const char         *member,
@@ -557,6 +560,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
    if (activation_entry)
      return TRUE;
 
+  /* Skip check on reply messages. */
+  if (requested_reply && !replycheck_verb)
+    return TRUE;
+
    if (!sender || !dbus_connection_get_unix_process_id (sender, &spid))
      spid = 0;
    if (!proposed_recipient || !dbus_connection_get_unix_process_id (proposed_recipient, &tpid))
@@ -631,10 +638,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
    else
      recipient_sid = BUS_SID_FROM_SELINUX (bus_sid);
 
-  ret = bus_selinux_check (sender_sid,
+  ret = bus_selinux_check (sender_sid,
  			   recipient_sid,
  			   "dbus",
-			   "send_msg",
+			   requested_reply ? replycheck_verb : "send_msg",
  			   &auxdata);
 
    _dbus_string_free (&auxdata);
@@ -1004,3 +1011,31 @@ bus_selinux_shutdown (void)
      }
  #endif /* HAVE_SELINUX */
  }
+
+/**
+ * Convert the replycheck configuraion string into the SELinux permission verb.
+ */
+const char*
+bus_selinux_convert_replycheck_option(const char *replycheck_option)
+{
+#ifdef HAVE_SELINUX
+    security_class_t security_class;
+
+    if (replycheck_option && strcmp (replycheck_option, "none") == 0)
+      return NULL;
+
+    if (replycheck_option && strcmp (replycheck_option, "send") == 0)
+      return "send_msg";
+
+    if (replycheck_option && strcmp (replycheck_option, "reply") == 0)
+      return "reply_msg";
+
+    security_class = string_to_security_class ("dbus");
+    if (security_class != 0 && string_to_av_perm (security_class, "reply_msg") != 0)
+      return "reply_msg";
+
+    return "send_msg";
+#else
+    return NULL;
+#endif /* HAVE_SELINUX */
+}
bus/selinux.h +3 -0
index 471f2629..f6b8e43d 100644
@@ -55,6 +55,8 @@ dbus_bool_t bus_selinux_allows_acquire_service (DBusConnection *connection,
 
  dbus_bool_t bus_selinux_allows_send            (DBusConnection *sender,
                                                  DBusConnection *proposed_recipient,
+						dbus_bool_t    requested_reply,
+						const char     *replycheck_verb,
  						const char     *msgtype, /* Supplementary audit data */
  						const char     *interface,
  						const char     *member,
@@ -66,4 +68,5 @@ dbus_bool_t bus_selinux_allows_send            (DBusConnection *sender,
  BusSELinuxID* bus_selinux_init_connection_id (DBusConnection *connection,
                                                DBusError      *error);
 
+const char* bus_selinux_convert_replycheck_option(const char *replycheck_option);
  #endif /* BUS_SELINUX_H */
doc/busconfig.dtd +3 -1
index 8c5ac334..d8855b1e 100644
@@ -59,11 +59,13 @@
  <!ELEMENT limit (#PCDATA)>
  <!ATTLIST limit name CDATA #REQUIRED>
 
-<!ELEMENT selinux (associate)*>
+<!ELEMENT selinux (associate|
+                   replycheck)*>
  <!ELEMENT associate EMPTY>
  <!ATTLIST associate
            own CDATA #REQUIRED
            context CDATA #REQUIRED>
+<!ELEMENT replycheck (#PCDATA)>
 
  <!ELEMENT apparmor EMPTY>
  <!ATTLIST apparmor
doc/dbus-daemon.1.xml.in +20 -1
index a9c0b5d5..62c3e334 100644
@@ -1154,6 +1154,7 @@ More details below.</para>
  <itemizedlist remap='TP'>
 
    <listitem><para><emphasis remap='I'>&lt;associate&gt;</emphasis></para></listitem>
+  <listitem><para><emphasis remap='I'>&lt;replycheck&gt;</emphasis></para></listitem>
 
 
  </itemizedlist>
@@ -1187,6 +1188,23 @@ Right now the default will be the security context of the bus itself.</para>
  <para>If two &lt;associate&gt; elements specify the same name, the element
  appearing later in the configuration file will be used.</para>
 
+
+<para>The &lt;replycheck&gt; element controls how reply messages are checked.
+There are four options:</para>
+<literallayout remap='.nf'>
+      "send"                       : the same SELinux permission as for request
+                                     messages is used (the previous default)
+      "none"                       : reply messages are not checked
+      "reply"                      : reply messages are checked with a distinct
+                                     SELinux permission
+      "reply_with_fallback"        : reply messages are checked with a distinct
+                                     SELinux permission, if this permission is
+                                     defined in the loaded SELinux policy.
+                                     Otherwise the same permission as for request
+                                     messages is used
+</literallayout> <!-- .fi -->
+
+
  <itemizedlist remap='TP'>
 
    <listitem><para><emphasis remap='I'>&lt;apparmor&gt;</emphasis></para></listitem>
@@ -1425,7 +1443,8 @@ that class.</para>
  <para>First, any time a message is routed from one connection to another
  connection, the bus daemon will check permissions with the security context of
  the first connection as source, security context of the second connection
-as target, object class "dbus" and requested permission "send_msg".</para>
+as target, object class "dbus" and requested permission "send_msg" or "reply_msg",
+depending on the message type and the &lt;replycheck&gt; setting.</para>
 
 
  <para>If a security context is not available for a connection
test/data/valid-config-files/basic.conf +1 -0
index 5297097d..de68caaf 100644
@@ -27,6 +27,7 @@
           context="my_selinux_context_t"/>
          <associate own="org.freedesktop.BlahBlahBlah"
           context="foo_t"/>
+        <replycheck>reply_with_fallback</replycheck>
    </selinux>
 
  </busconfig>
Signature · 1 line
Chris PeBenito
#2 lore raw
Quoted 9 lines · Chris PeBenito
Quoted 4 lines · Christian Göttsche

Currently all reply messages are checked with the same SELinux permission as request messages ("send_mesg").
Add an option <replycheck> to be able to use a distinc SELinux permission for reply messages.

This has bugged me for a long time. Is there ever a reason where a reply should be denied? Does dbus have any methods where a 1-way message can work?

I suspect so but i might be wrong, there are three scenarios that i know of:

1. method_call (calling a method might or might not return a result i suspect)
2. method_return (method_call return)
3. signal (receive signals)

1. i suspect that one can send a method_call and not get a return (ie where you just ask a party to just perform some action and not to return some result)

2. This implies that a method is called so this is probably always "two-way"

3. I suppose one might need to subscribe to receiving signals (if thats true which i am not sure of then eventually this is "two way" as well. If you dont have to "subscribe" to signals then it could be one-way

By the way this is also where dbus-broker and dbus-daemon differ, dbus-broker does not perform checks on method_return where dbus-daemon does

Ideally we could have seperate permissions for each scenario IMHO. i.e. "dbus method_call" , "dbus method_return" , "dbus receive_signal"

The current dbus-daemon implementation lacks though because if you dont own a name on the bus yourself but if you call a method of some service on the bus then that service is automatically also allowed to call the sender even if that does not make sense since the sender of the method call does not own a name on the bus

so currently dbus-brokers implementation makes more sense to me, but it still does not address the "receive signal" scenario

Quoted 496 lines
Quoted 496 lines

Upstream Merge Request: https://gitlab.freedesktop.org/dbus/dbus/-/merge_requests/199

---
  bus/bus.c                               | 26 +++++++++++++
  bus/bus.h                               |  1 +
  bus/config-parser-common.c              |  6 +++
  bus/config-parser-common.h              |  1 +
  bus/config-parser-trivial.c             | 29 ++++++++++++++
  bus/config-parser.c                     | 50 ++++++++++++++++++++++++-
  bus/config-parser.h                     |  1 +
  bus/selinux.c                           | 39 ++++++++++++++++++-
  bus/selinux.h                           |  3 ++
  doc/busconfig.dtd                       |  4 +-
  doc/dbus-daemon.1.xml.in                | 21 ++++++++++-
  test/data/valid-config-files/basic.conf |  1 +
  12 files changed, 177 insertions(+), 5 deletions(-)
bus/bus.c +24 -0
index db20bbbc..3f4c1ef6 100644
@@ -57,6 +57,7 @@ struct BusContext
    char *config_file;
    char *type;
    char *servicehelper;
+  char *replycheck_verb;
    char *address;
    char *pidfile;
    char *user;
@@ -568,6 +569,7 @@ process_config_every_time (BusContext      *context,
    DBusList **dirs;
    char *addr;
    const char *servicehelper;
+  const char *replycheck_verb;
    char *s;
      dbus_bool_t retval;
@@ -664,6 +666,21 @@ process_config_every_time (BusContext      *context,
        context->servicehelper = s;
      }
  +  /* and the replycheck */
+  replycheck_verb = bus_selinux_convert_replycheck_option (bus_config_parser_get_replycheck (parser));
+
+  s = _dbus_strdup(replycheck_verb);
+  if (s == NULL && replycheck_verb != NULL)
+    {
+      BUS_SET_OOM (error);
+      goto failed;
+    }
+  else
+    {
+      dbus_free(context->replycheck_verb);
+      context->replycheck_verb = s;
+    }
+
    /* Create activation subsystem */
    if (context->activation)
      {
@@ -1222,6 +1239,7 @@ bus_context_unref (BusContext *context)
        dbus_free (context->address);
        dbus_free (context->user);
        dbus_free (context->servicehelper);
+      dbus_free (context->replycheck_verb);
          if (context->pidfile)
  	{
@@ -1264,6 +1282,12 @@ bus_context_get_servicehelper (BusContext *context)
    return context->servicehelper;
  }
  +const char*
+bus_context_get_replycheck_verb (BusContext *context)
+{
+    return context->replycheck_verb;
+}
+
  dbus_bool_t
  bus_context_get_systemd_activation (BusContext *context)
  {
@@ -1677,6 +1701,8 @@ bus_context_check_security_policy (BusContext     *context,
         * go on with the standard checks.
         */
        if (!bus_selinux_allows_send (sender, proposed_recipient,
+                                    requested_reply,
+                                    bus_context_get_replycheck_verb (context),
                                      dbus_message_type_to_string (dbus_message_get_type (message)),
                                      dbus_message_get_interface (message),
                                      dbus_message_get_member (message),
bus/bus.h +1 -0
index 99625ca3..5c8d8dcf 100644
@@ -100,6 +100,7 @@ dbus_bool_t       bus_context_get_id                             (BusContext
  const char*       bus_context_get_type                           (BusContext       *context);
  const char*       bus_context_get_address                        (BusContext       *context);
  const char*       bus_context_get_servicehelper                  (BusContext       *context);
+const char*       bus_context_get_replycheck_verb                (BusContext       *context);
  dbus_bool_t       bus_context_get_systemd_activation             (BusContext       *context);
  BusRegistry*      bus_context_get_registry                       (BusContext       *context);
  BusConnections*   bus_context_get_connections                    (BusContext       *context);
bus/config-parser-common.c +6 -0
index 627c9013..ec069bf3 100644
@@ -115,6 +115,10 @@ bus_config_parser_element_name_to_type (const char *name)
      {
        return ELEMENT_ASSOCIATE;
      }
+  else if (strcmp (name, "replycheck") == 0)
+    {
+        return ELEMENT_REPLYCHECK;
+    }
    else if (strcmp (name, "syslog") == 0)
      {
        return ELEMENT_SYSLOG;
@@ -179,6 +183,8 @@ bus_config_parser_element_type_to_name (ElementType type)
        return "selinux";
      case ELEMENT_ASSOCIATE:
        return "associate";
+    case ELEMENT_REPLYCHECK:
+        return "replycheck";
      case ELEMENT_SYSLOG:
        return "syslog";
      case ELEMENT_KEEP_UMASK:
bus/config-parser-common.h +1 -0
index 1c601e97..b2e58579 100644
@@ -45,6 +45,7 @@ typedef enum
    ELEMENT_CONFIGTYPE,
    ELEMENT_SELINUX,
    ELEMENT_ASSOCIATE,
+  ELEMENT_REPLYCHECK,
    ELEMENT_STANDARD_SESSION_SERVICEDIRS,
    ELEMENT_STANDARD_SYSTEM_SERVICEDIRS,
    ELEMENT_KEEP_UMASK,
bus/config-parser-trivial.c +1 -0
index 9a2087cf..8d74f6bc 100644
@@ -40,6 +40,7 @@ struct BusConfigParser
    DBusString user;                  /**< User the dbus-daemon runs as */
    DBusString bus_type;              /**< Message bus type */
    DBusString service_helper;        /**< Location of the setuid helper */
+  DBusString replycheck;            /**< SELinux checking of reply messages */
    DBusList *service_dirs;           /**< Directories to look for services in */
  };
  @@ -101,11 +102,15 @@ bus_config_parser_new (const DBusString

*basedir,

      goto failed_type;
    if (!_dbus_string_init (&parser->service_helper))
      goto failed_helper;
bus/config-parser-trivial.c +6 -0
+  if (!_dbus_string_init (&parser->replycheck))
+    goto failed_reply;
      /* woot! */
    return parser;
    /* argh. we have do do this carefully because of OOM */
+failed_reply:
+  _dbus_string_free (&parser->service_helper);
  failed_helper:
    _dbus_string_free (&parser->bus_type);
  failed_type:
@@ -121,6 +126,7 @@ bus_config_parser_unref (BusConfigParser *parser)
  {
    _dbus_string_free (&parser->user);
    _dbus_string_free (&parser->service_helper);
+  _dbus_string_free (&parser->replycheck);
    _dbus_string_free (&parser->bus_type);
    _dbus_list_clear_full (&parser->service_dirs, dbus_free);
    dbus_free (parser);
@@ -142,6 +148,7 @@ bus_config_parser_start_element (BusConfigParser   *parser,
      case ELEMENT_SERVICEHELPER:
      case ELEMENT_USER:
      case ELEMENT_CONFIGTYPE:
+    case ELEMENT_REPLYCHECK:
        /* content about to be handled */
        break;
  @@ -284,6 +291,28 @@ bus_config_parser_content (BusConfigParser

*parser,

        }
        break;

+ case ELEMENT_REPLYCHECK:

bus/config-parser-trivial.c +21 -0
+      {
+        const char* content_string;
+        if (!_dbus_string_copy (&content_sane, 0, &parser->replycheck, 0))
+          {
+            BUS_SET_OOM (error);
+            goto out_content;
+          }
+
+          content_string = _dbus_string_get_const_data (&content_sane);
+          if (strcmp(content_string, "none") != 0 &&
+            strcmp(content_string, "send") != 0 &&
+            strcmp(content_string, "reply_with_fallback") != 0 &&
+            strcmp(content_string, "reply") != 0)
+            {
+              dbus_set_error (error, DBUS_ERROR_FAILED,
+                              "Element <replycheck> has invalid content %s", content_string);
+              goto out_content;
+            }
+      }
+      break;
+
      case ELEMENT_NONE:
      case ELEMENT_BUSCONFIG:
      case ELEMENT_INCLUDE:
bus/config-parser.c +0 -0
index f9b70477..39b673cd 100644
@@ -115,6 +115,8 @@ struct BusConfigParser
      DBusHashTable *service_context_table; /**< Map service names

to SELinux contexts */
+ char *replycheck; /**< What permission verb to use on
message replies */

bus/config-parser.c +7 -0
+
    unsigned int fork : 1; /**< TRUE to fork into daemon mode */
      unsigned int syslog : 1; /**< TRUE to enable syslog */
@@ -402,6 +404,13 @@ merge_included (BusConfigParser *parser,
        included->servicehelper = NULL;
      }
  +  if (included->replycheck != NULL)
+    {
+      dbus_free (parser->replycheck);
+      parser->replycheck = included->replycheck;
+      included->replycheck = NULL;
+    }
+
    while ((link = _dbus_list_pop_first_link (&included->listen_on)))
      _dbus_list_append_link (&parser->listen_on, link);
  @@ -585,6 +594,7 @@ bus_config_parser_unref (BusConfigParser

*parser)

        dbus_free (parser->servicehelper);
        dbus_free (parser->bus_type);
        dbus_free (parser->pidfile);
bus/config-parser.c +37 -1
+      dbus_free (parser->replycheck);
          _dbus_list_clear_full (&parser->listen_on, dbus_free);
        _dbus_list_clear_full (&parser->service_dirs,
@@ -1977,6 +1987,19 @@ start_selinux_child (BusConfigParser   *parser,
  					   own_copy, context_copy))
          goto oom;
  +      return TRUE;
+    }
+  else if (strcmp (element_name, "replycheck") == 0)
+    {
+      if (!check_no_attributes (parser, "replycheck", attribute_names, attribute_values, error))
+          return FALSE;
+
+      if (push_element (parser, ELEMENT_REPLYCHECK) == NULL)
+        {
+          BUS_SET_OOM (error);
+          return FALSE;
+        }
+
        return TRUE;
      }
    else
@@ -2277,6 +2300,7 @@ bus_config_parser_end_element (BusConfigParser   *parser,
      case ELEMENT_SERVICEHELPER:
      case ELEMENT_INCLUDEDIR:
      case ELEMENT_LIMIT:
+    case ELEMENT_REPLYCHECK:
        if (!e->had_content)
          {
            dbus_set_error (error, DBUS_ERROR_FAILED,
@@ -2870,6 +2894,20 @@ bus_config_parser_content (BusConfigParser   *parser,
                         e->d.limit.name);
        }
        break;
+
+    case ELEMENT_REPLYCHECK:
+      {
+        char *s;
+
+        e->had_content = TRUE;
+
+        if (!_dbus_string_copy_data (content, &s))
+            goto nomem;
+
+        dbus_free (parser->replycheck);
+        parser->replycheck = s;
+      }
+      break;
      }
      _DBUS_ASSERT_ERROR_IS_CLEAR (error);
@@ -2977,6 +3015,12 @@ bus_config_parser_get_servicehelper (BusConfigParser   *parser)
    return parser->servicehelper;
  }
  +const char *
+bus_config_parser_get_replycheck (BusConfigParser   *parser)
+{
+    return parser->replycheck;
+}
+
  BusPolicy*
  bus_config_parser_steal_policy (BusConfigParser *parser)
  {
@@ -3371,6 +3415,7 @@ elements_equal (const Element *a,
      case ELEMENT_CONFIGTYPE:
      case ELEMENT_SELINUX:
      case ELEMENT_ASSOCIATE:
+    case ELEMENT_REPLYCHECK:
      case ELEMENT_STANDARD_SESSION_SERVICEDIRS:
      case ELEMENT_STANDARD_SYSTEM_SERVICEDIRS:
      case ELEMENT_KEEP_UMASK:
@@ -3501,7 +3546,7 @@ config_parsers_equal (const BusConfigParser *a,
      if (!lists_of_service_dirs_equal (a->service_dirs,
 b->service_dirs))
      return FALSE;
-
+
    /* FIXME: compare policy */
      /* FIXME: compare service selinux ID table */
@@ -3512,6 +3557,9 @@ config_parsers_equal (const BusConfigParser *a,
    if (!strings_equal_or_both_null (a->pidfile, b->pidfile))
      return FALSE;
  +  if (!strings_equal_or_both_null (a->replycheck, b->replycheck))
+    return FALSE;
+
    if (! bools_equal (a->fork, b->fork))
      return FALSE;
  diff --git a/bus/config-parser.h b/bus/config-parser.h

index 7f4d2f47..7a79d698 100644

bus/config-parser.h +1 -0
@@ -65,6 +65,7 @@ dbus_bool_t bus_config_parser_get_syslog       (BusConfigParser *parser);
  dbus_bool_t bus_config_parser_get_keep_umask   (BusConfigParser *parser);
  const char* bus_config_parser_get_pidfile      (BusConfigParser *parser);
  const char* bus_config_parser_get_servicehelper (BusConfigParser *parser);
+const char* bus_config_parser_get_replycheck   (BusConfigParser *parser);
  DBusList**  bus_config_parser_get_service_dirs (BusConfigParser *parser);
  DBusList**  bus_config_parser_get_conf_dirs    (BusConfigParser *parser);
  BusPolicy*  bus_config_parser_steal_policy     (BusConfigParser *parser);
bus/selinux.c +36 -1
index 42017e7a..8672e083 100644
@@ -378,6 +378,7 @@ error:
   * granted from the connection to the message bus or to another
   * optionally supplied security identifier (e.g. for a service
   * context).  Currently these permissions are either send_msg or
+ * reply_msg (depending in the replycheck configuration) or
   * acquire_svc in the dbus class.
   *
   * @param sender_sid source security context
@@ -534,6 +535,8 @@ bus_selinux_allows_acquire_service (DBusConnection     *connection,
  dbus_bool_t
  bus_selinux_allows_send (DBusConnection     *sender,
                           DBusConnection     *proposed_recipient,
+			 dbus_bool_t        requested_reply,
+			 const char         *replycheck_verb,
  			 const char         *msgtype,
  			 const char         *interface,
  			 const char         *member,
@@ -557,6 +560,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
    if (activation_entry)
      return TRUE;
  +  /* Skip check on reply messages. */
+  if (requested_reply && !replycheck_verb)
+    return TRUE;
+
    if (!sender || !dbus_connection_get_unix_process_id (sender, &spid))
      spid = 0;
    if (!proposed_recipient || !dbus_connection_get_unix_process_id (proposed_recipient, &tpid))
@@ -631,10 +638,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
    else
      recipient_sid = BUS_SID_FROM_SELINUX (bus_sid);
  -  ret = bus_selinux_check (sender_sid,
+  ret = bus_selinux_check (sender_sid,
  			   recipient_sid,
  			   "dbus",
-			   "send_msg",
+			   requested_reply ? replycheck_verb : "send_msg",
  			   &auxdata);
      _dbus_string_free (&auxdata);
@@ -1004,3 +1011,31 @@ bus_selinux_shutdown (void)
      }
  #endif /* HAVE_SELINUX */
  }
+
+/**
+ * Convert the replycheck configuraion string into the SELinux permission verb.
+ */
+const char*
+bus_selinux_convert_replycheck_option(const char *replycheck_option)
+{
+#ifdef HAVE_SELINUX
+    security_class_t security_class;
+
+    if (replycheck_option && strcmp (replycheck_option, "none") == 0)
+      return NULL;
+
+    if (replycheck_option && strcmp (replycheck_option, "send") == 0)
+      return "send_msg";
+
+    if (replycheck_option && strcmp (replycheck_option, "reply") == 0)
+      return "reply_msg";
+
+    security_class = string_to_security_class ("dbus");
+    if (security_class != 0 && string_to_av_perm (security_class, "reply_msg") != 0)
+      return "reply_msg";
+
+    return "send_msg";
+#else
+    return NULL;
+#endif /* HAVE_SELINUX */
+}
bus/selinux.h +2 -0
index 471f2629..f6b8e43d 100644
@@ -55,6 +55,8 @@ dbus_bool_t bus_selinux_allows_acquire_service (DBusConnection *connection,
    dbus_bool_t bus_selinux_allows_send            (DBusConnection
 *sender,
                                                  DBusConnection *proposed_recipient,
+						dbus_bool_t    requested_reply,
+						const char     *replycheck_verb,
  						const char     *msgtype, /* Supplementary audit data */
  						const char     *interface,
  						const char     *member,
@@ -66,4 +68,5 @@ dbus_bool_t bus_selinux_allows_send            (DBusConnection *sender,
  BusSELinuxID* bus_selinux_init_connection_id (DBusConnection *connection,
                                                DBusError      *error);
  +const char* bus_selinux_convert_replycheck_option(const char
 *replycheck_option);
  #endif /* BUS_SELINUX_H */
doc/busconfig.dtd +3 -0
index 8c5ac334..d8855b1e 100644
@@ -59,11 +59,13 @@
  <!ELEMENT limit (#PCDATA)>
  <!ATTLIST limit name CDATA #REQUIRED>
  -<!ELEMENT selinux (associate)*>
+<!ELEMENT selinux (associate|
+                   replycheck)*>
  <!ELEMENT associate EMPTY>
  <!ATTLIST associate
            own CDATA #REQUIRED
            context CDATA #REQUIRED>
+<!ELEMENT replycheck (#PCDATA)>
    <!ELEMENT apparmor EMPTY>
  <!ATTLIST apparmor
doc/dbus-daemon.1.xml.in +0 -0
index a9c0b5d5..62c3e334 100644
@@ -1154,6 +1154,7 @@ More details below.</para>
  <itemizedlist remap='TP'>
      <listitem><para><emphasis

remap='I'>&lt;associate&gt;</emphasis></para></listitem>

doc/dbus-daemon.1.xml.in +17 -0
+  <listitem><para><emphasis remap='I'>&lt;replycheck&gt;</emphasis></para></listitem>
 
  </itemizedlist>
@@ -1187,6 +1188,23 @@ Right now the default will be the security context of the bus itself.</para>
  <para>If two &lt;associate&gt; elements specify the same name, the element
  appearing later in the configuration file will be used.</para>
  +
+<para>The &lt;replycheck&gt; element controls how reply messages are checked.
+There are four options:</para>
+<literallayout remap='.nf'>
+      "send"                       : the same SELinux permission as for request
+                                     messages is used (the previous default)
+      "none"                       : reply messages are not checked
+      "reply"                      : reply messages are checked with a distinct
+                                     SELinux permission
+      "reply_with_fallback"        : reply messages are checked with a distinct
+                                     SELinux permission, if this permission is
+                                     defined in the loaded SELinux policy.
+                                     Otherwise the same permission as for request
+                                     messages is used
+</literallayout> <!-- .fi -->
+
+
  <itemizedlist remap='TP'>
      <listitem><para><emphasis

remap='I'>&lt;apparmor&gt;</emphasis></para></listitem>

doc/dbus-daemon.1.xml.in +2 -1
@@ -1425,7 +1443,8 @@ that class.</para>
  <para>First, any time a message is routed from one connection to another
  connection, the bus daemon will check permissions with the security context of
  the first connection as source, security context of the second connection
-as target, object class "dbus" and requested permission "send_msg".</para>
+as target, object class "dbus" and requested permission "send_msg" or "reply_msg",
+depending on the message type and the &lt;replycheck&gt; setting.</para>
 
  <para>If a security context is not available for a connection
test/data/valid-config-files/basic.conf +1 -0
index 5297097d..de68caaf 100644
@@ -27,6 +27,7 @@
           context="my_selinux_context_t"/>
          <associate own="org.freedesktop.BlahBlahBlah"
           context="foo_t"/>
+        <replycheck>reply_with_fallback</replycheck>
    </selinux>
    </busconfig>
 
Signature · 4 lines
gpg --locate-keys [email protected]
Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
Dominick Grift
#3 lore raw
Quoted 37 lines · Dominick Grift
Quoted 9 lines · Chris PeBenito
Quoted 4 lines · Christian Göttsche

Currently all reply messages are checked with the same SELinux permission as request messages ("send_mesg").
Add an option <replycheck> to be able to use a distinc SELinux permission for reply messages.

This has bugged me for a long time. Is there ever a reason where a reply should be denied? Does dbus have any methods where a 1-way message can work?

I suspect so but i might be wrong, there are three scenarios that i know of:

1. method_call (calling a method might or might not return a result i suspect)
2. method_return (method_call return)
3. signal (receive signals)

1. i suspect that one can send a method_call and not get a return (ie where you just ask a party to just perform some action and not to return some result)

2. This implies that a method is called so this is probably always "two-way"

3. I suppose one might need to subscribe to receiving signals (if thats true which i am not sure of then eventually this is "two way" as well. If you dont have to "subscribe" to signals then it could be one-way

By the way this is also where dbus-broker and dbus-daemon differ, dbus-broker does not perform checks on method_return where dbus-daemon does

Ideally we could have seperate permissions for each scenario IMHO. i.e. "dbus method_call" , "dbus method_return" , "dbus receive_signal"

Quoted 8 lines

The current dbus-daemon implementation lacks though because if you dont own a name on the bus yourself but if you call a method of some service on the bus then that service is automatically also allowed to call the sender even if that does not make sense since the sender of the method call does not own a name on the bus

so currently dbus-brokers implementation makes more sense to me, but it still does not address the "receive signal" scenario

For reference:

https://github.com/bus1/dbus-broker/issues/187#issuecomment-455000138

Quoted 497 lines
Quoted 497 lines
Quoted 497 lines

Upstream Merge Request: https://gitlab.freedesktop.org/dbus/dbus/-/merge_requests/199

---
  bus/bus.c                               | 26 +++++++++++++
  bus/bus.h                               |  1 +
  bus/config-parser-common.c              |  6 +++
  bus/config-parser-common.h              |  1 +
  bus/config-parser-trivial.c             | 29 ++++++++++++++
  bus/config-parser.c                     | 50 ++++++++++++++++++++++++-
  bus/config-parser.h                     |  1 +
  bus/selinux.c                           | 39 ++++++++++++++++++-
  bus/selinux.h                           |  3 ++
  doc/busconfig.dtd                       |  4 +-
  doc/dbus-daemon.1.xml.in                | 21 ++++++++++-
  test/data/valid-config-files/basic.conf |  1 +
  12 files changed, 177 insertions(+), 5 deletions(-)
bus/bus.c +24 -0
index db20bbbc..3f4c1ef6 100644
@@ -57,6 +57,7 @@ struct BusContext
    char *config_file;
    char *type;
    char *servicehelper;
+  char *replycheck_verb;
    char *address;
    char *pidfile;
    char *user;
@@ -568,6 +569,7 @@ process_config_every_time (BusContext      *context,
    DBusList **dirs;
    char *addr;
    const char *servicehelper;
+  const char *replycheck_verb;
    char *s;
      dbus_bool_t retval;
@@ -664,6 +666,21 @@ process_config_every_time (BusContext      *context,
        context->servicehelper = s;
      }
  +  /* and the replycheck */
+  replycheck_verb = bus_selinux_convert_replycheck_option (bus_config_parser_get_replycheck (parser));
+
+  s = _dbus_strdup(replycheck_verb);
+  if (s == NULL && replycheck_verb != NULL)
+    {
+      BUS_SET_OOM (error);
+      goto failed;
+    }
+  else
+    {
+      dbus_free(context->replycheck_verb);
+      context->replycheck_verb = s;
+    }
+
    /* Create activation subsystem */
    if (context->activation)
      {
@@ -1222,6 +1239,7 @@ bus_context_unref (BusContext *context)
        dbus_free (context->address);
        dbus_free (context->user);
        dbus_free (context->servicehelper);
+      dbus_free (context->replycheck_verb);
          if (context->pidfile)
  	{
@@ -1264,6 +1282,12 @@ bus_context_get_servicehelper (BusContext *context)
    return context->servicehelper;
  }
  +const char*
+bus_context_get_replycheck_verb (BusContext *context)
+{
+    return context->replycheck_verb;
+}
+
  dbus_bool_t
  bus_context_get_systemd_activation (BusContext *context)
  {
@@ -1677,6 +1701,8 @@ bus_context_check_security_policy (BusContext     *context,
         * go on with the standard checks.
         */
        if (!bus_selinux_allows_send (sender, proposed_recipient,
+                                    requested_reply,
+                                    bus_context_get_replycheck_verb (context),
                                      dbus_message_type_to_string (dbus_message_get_type (message)),
                                      dbus_message_get_interface (message),
                                      dbus_message_get_member (message),
bus/bus.h +1 -0
index 99625ca3..5c8d8dcf 100644
@@ -100,6 +100,7 @@ dbus_bool_t       bus_context_get_id                             (BusContext
  const char*       bus_context_get_type                           (BusContext       *context);
  const char*       bus_context_get_address                        (BusContext       *context);
  const char*       bus_context_get_servicehelper                  (BusContext       *context);
+const char*       bus_context_get_replycheck_verb                (BusContext       *context);
  dbus_bool_t       bus_context_get_systemd_activation             (BusContext       *context);
  BusRegistry*      bus_context_get_registry                       (BusContext       *context);
  BusConnections*   bus_context_get_connections                    (BusContext       *context);
bus/config-parser-common.c +6 -0
index 627c9013..ec069bf3 100644
@@ -115,6 +115,10 @@ bus_config_parser_element_name_to_type (const char *name)
      {
        return ELEMENT_ASSOCIATE;
      }
+  else if (strcmp (name, "replycheck") == 0)
+    {
+        return ELEMENT_REPLYCHECK;
+    }
    else if (strcmp (name, "syslog") == 0)
      {
        return ELEMENT_SYSLOG;
@@ -179,6 +183,8 @@ bus_config_parser_element_type_to_name (ElementType type)
        return "selinux";
      case ELEMENT_ASSOCIATE:
        return "associate";
+    case ELEMENT_REPLYCHECK:
+        return "replycheck";
      case ELEMENT_SYSLOG:
        return "syslog";
      case ELEMENT_KEEP_UMASK:
bus/config-parser-common.h +1 -0
index 1c601e97..b2e58579 100644
@@ -45,6 +45,7 @@ typedef enum
    ELEMENT_CONFIGTYPE,
    ELEMENT_SELINUX,
    ELEMENT_ASSOCIATE,
+  ELEMENT_REPLYCHECK,
    ELEMENT_STANDARD_SESSION_SERVICEDIRS,
    ELEMENT_STANDARD_SYSTEM_SERVICEDIRS,
    ELEMENT_KEEP_UMASK,
bus/config-parser-trivial.c +1 -0
index 9a2087cf..8d74f6bc 100644
@@ -40,6 +40,7 @@ struct BusConfigParser
    DBusString user;                  /**< User the dbus-daemon runs as */
    DBusString bus_type;              /**< Message bus type */
    DBusString service_helper;        /**< Location of the setuid helper */
+  DBusString replycheck;            /**< SELinux checking of reply messages */
    DBusList *service_dirs;           /**< Directories to look for services in */
  };
  @@ -101,11 +102,15 @@ bus_config_parser_new (const DBusString

*basedir,

      goto failed_type;
    if (!_dbus_string_init (&parser->service_helper))
      goto failed_helper;
bus/config-parser-trivial.c +6 -0
+  if (!_dbus_string_init (&parser->replycheck))
+    goto failed_reply;
      /* woot! */
    return parser;
    /* argh. we have do do this carefully because of OOM */
+failed_reply:
+  _dbus_string_free (&parser->service_helper);
  failed_helper:
    _dbus_string_free (&parser->bus_type);
  failed_type:
@@ -121,6 +126,7 @@ bus_config_parser_unref (BusConfigParser *parser)
  {
    _dbus_string_free (&parser->user);
    _dbus_string_free (&parser->service_helper);
+  _dbus_string_free (&parser->replycheck);
    _dbus_string_free (&parser->bus_type);
    _dbus_list_clear_full (&parser->service_dirs, dbus_free);
    dbus_free (parser);
@@ -142,6 +148,7 @@ bus_config_parser_start_element (BusConfigParser   *parser,
      case ELEMENT_SERVICEHELPER:
      case ELEMENT_USER:
      case ELEMENT_CONFIGTYPE:
+    case ELEMENT_REPLYCHECK:
        /* content about to be handled */
        break;
  @@ -284,6 +291,28 @@ bus_config_parser_content (BusConfigParser

*parser,

        }
        break;

+ case ELEMENT_REPLYCHECK:

bus/config-parser-trivial.c +21 -0
+      {
+        const char* content_string;
+        if (!_dbus_string_copy (&content_sane, 0, &parser->replycheck, 0))
+          {
+            BUS_SET_OOM (error);
+            goto out_content;
+          }
+
+          content_string = _dbus_string_get_const_data (&content_sane);
+          if (strcmp(content_string, "none") != 0 &&
+            strcmp(content_string, "send") != 0 &&
+            strcmp(content_string, "reply_with_fallback") != 0 &&
+            strcmp(content_string, "reply") != 0)
+            {
+              dbus_set_error (error, DBUS_ERROR_FAILED,
+                              "Element <replycheck> has invalid content %s", content_string);
+              goto out_content;
+            }
+      }
+      break;
+
      case ELEMENT_NONE:
      case ELEMENT_BUSCONFIG:
      case ELEMENT_INCLUDE:
bus/config-parser.c +0 -0
index f9b70477..39b673cd 100644
@@ -115,6 +115,8 @@ struct BusConfigParser
      DBusHashTable *service_context_table; /**< Map service names

to SELinux contexts */
+ char *replycheck; /**< What permission verb to use on
message replies */

bus/config-parser.c +7 -0
+
    unsigned int fork : 1; /**< TRUE to fork into daemon mode */
      unsigned int syslog : 1; /**< TRUE to enable syslog */
@@ -402,6 +404,13 @@ merge_included (BusConfigParser *parser,
        included->servicehelper = NULL;
      }
  +  if (included->replycheck != NULL)
+    {
+      dbus_free (parser->replycheck);
+      parser->replycheck = included->replycheck;
+      included->replycheck = NULL;
+    }
+
    while ((link = _dbus_list_pop_first_link (&included->listen_on)))
      _dbus_list_append_link (&parser->listen_on, link);
  @@ -585,6 +594,7 @@ bus_config_parser_unref (BusConfigParser

*parser)

        dbus_free (parser->servicehelper);
        dbus_free (parser->bus_type);
        dbus_free (parser->pidfile);
bus/config-parser.c +37 -1
+      dbus_free (parser->replycheck);
          _dbus_list_clear_full (&parser->listen_on, dbus_free);
        _dbus_list_clear_full (&parser->service_dirs,
@@ -1977,6 +1987,19 @@ start_selinux_child (BusConfigParser   *parser,
  					   own_copy, context_copy))
          goto oom;
  +      return TRUE;
+    }
+  else if (strcmp (element_name, "replycheck") == 0)
+    {
+      if (!check_no_attributes (parser, "replycheck", attribute_names, attribute_values, error))
+          return FALSE;
+
+      if (push_element (parser, ELEMENT_REPLYCHECK) == NULL)
+        {
+          BUS_SET_OOM (error);
+          return FALSE;
+        }
+
        return TRUE;
      }
    else
@@ -2277,6 +2300,7 @@ bus_config_parser_end_element (BusConfigParser   *parser,
      case ELEMENT_SERVICEHELPER:
      case ELEMENT_INCLUDEDIR:
      case ELEMENT_LIMIT:
+    case ELEMENT_REPLYCHECK:
        if (!e->had_content)
          {
            dbus_set_error (error, DBUS_ERROR_FAILED,
@@ -2870,6 +2894,20 @@ bus_config_parser_content (BusConfigParser   *parser,
                         e->d.limit.name);
        }
        break;
+
+    case ELEMENT_REPLYCHECK:
+      {
+        char *s;
+
+        e->had_content = TRUE;
+
+        if (!_dbus_string_copy_data (content, &s))
+            goto nomem;
+
+        dbus_free (parser->replycheck);
+        parser->replycheck = s;
+      }
+      break;
      }
      _DBUS_ASSERT_ERROR_IS_CLEAR (error);
@@ -2977,6 +3015,12 @@ bus_config_parser_get_servicehelper (BusConfigParser   *parser)
    return parser->servicehelper;
  }
  +const char *
+bus_config_parser_get_replycheck (BusConfigParser   *parser)
+{
+    return parser->replycheck;
+}
+
  BusPolicy*
  bus_config_parser_steal_policy (BusConfigParser *parser)
  {
@@ -3371,6 +3415,7 @@ elements_equal (const Element *a,
      case ELEMENT_CONFIGTYPE:
      case ELEMENT_SELINUX:
      case ELEMENT_ASSOCIATE:
+    case ELEMENT_REPLYCHECK:
      case ELEMENT_STANDARD_SESSION_SERVICEDIRS:
      case ELEMENT_STANDARD_SYSTEM_SERVICEDIRS:
      case ELEMENT_KEEP_UMASK:
@@ -3501,7 +3546,7 @@ config_parsers_equal (const BusConfigParser *a,
      if (!lists_of_service_dirs_equal (a->service_dirs,
 b->service_dirs))
      return FALSE;
-
+
    /* FIXME: compare policy */
      /* FIXME: compare service selinux ID table */
@@ -3512,6 +3557,9 @@ config_parsers_equal (const BusConfigParser *a,
    if (!strings_equal_or_both_null (a->pidfile, b->pidfile))
      return FALSE;
  +  if (!strings_equal_or_both_null (a->replycheck, b->replycheck))
+    return FALSE;
+
    if (! bools_equal (a->fork, b->fork))
      return FALSE;
  diff --git a/bus/config-parser.h b/bus/config-parser.h

index 7f4d2f47..7a79d698 100644

bus/config-parser.h +1 -0
@@ -65,6 +65,7 @@ dbus_bool_t bus_config_parser_get_syslog       (BusConfigParser *parser);
  dbus_bool_t bus_config_parser_get_keep_umask   (BusConfigParser *parser);
  const char* bus_config_parser_get_pidfile      (BusConfigParser *parser);
  const char* bus_config_parser_get_servicehelper (BusConfigParser *parser);
+const char* bus_config_parser_get_replycheck   (BusConfigParser *parser);
  DBusList**  bus_config_parser_get_service_dirs (BusConfigParser *parser);
  DBusList**  bus_config_parser_get_conf_dirs    (BusConfigParser *parser);
  BusPolicy*  bus_config_parser_steal_policy     (BusConfigParser *parser);
bus/selinux.c +36 -1
index 42017e7a..8672e083 100644
@@ -378,6 +378,7 @@ error:
   * granted from the connection to the message bus or to another
   * optionally supplied security identifier (e.g. for a service
   * context).  Currently these permissions are either send_msg or
+ * reply_msg (depending in the replycheck configuration) or
   * acquire_svc in the dbus class.
   *
   * @param sender_sid source security context
@@ -534,6 +535,8 @@ bus_selinux_allows_acquire_service (DBusConnection     *connection,
  dbus_bool_t
  bus_selinux_allows_send (DBusConnection     *sender,
                           DBusConnection     *proposed_recipient,
+			 dbus_bool_t        requested_reply,
+			 const char         *replycheck_verb,
  			 const char         *msgtype,
  			 const char         *interface,
  			 const char         *member,
@@ -557,6 +560,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
    if (activation_entry)
      return TRUE;
  +  /* Skip check on reply messages. */
+  if (requested_reply && !replycheck_verb)
+    return TRUE;
+
    if (!sender || !dbus_connection_get_unix_process_id (sender, &spid))
      spid = 0;
    if (!proposed_recipient || !dbus_connection_get_unix_process_id (proposed_recipient, &tpid))
@@ -631,10 +638,10 @@ bus_selinux_allows_send (DBusConnection     *sender,
    else
      recipient_sid = BUS_SID_FROM_SELINUX (bus_sid);
  -  ret = bus_selinux_check (sender_sid,
+  ret = bus_selinux_check (sender_sid,
  			   recipient_sid,
  			   "dbus",
-			   "send_msg",
+			   requested_reply ? replycheck_verb : "send_msg",
  			   &auxdata);
      _dbus_string_free (&auxdata);
@@ -1004,3 +1011,31 @@ bus_selinux_shutdown (void)
      }
  #endif /* HAVE_SELINUX */
  }
+
+/**
+ * Convert the replycheck configuraion string into the SELinux permission verb.
+ */
+const char*
+bus_selinux_convert_replycheck_option(const char *replycheck_option)
+{
+#ifdef HAVE_SELINUX
+    security_class_t security_class;
+
+    if (replycheck_option && strcmp (replycheck_option, "none") == 0)
+      return NULL;
+
+    if (replycheck_option && strcmp (replycheck_option, "send") == 0)
+      return "send_msg";
+
+    if (replycheck_option && strcmp (replycheck_option, "reply") == 0)
+      return "reply_msg";
+
+    security_class = string_to_security_class ("dbus");
+    if (security_class != 0 && string_to_av_perm (security_class, "reply_msg") != 0)
+      return "reply_msg";
+
+    return "send_msg";
+#else
+    return NULL;
+#endif /* HAVE_SELINUX */
+}
bus/selinux.h +2 -0
index 471f2629..f6b8e43d 100644
@@ -55,6 +55,8 @@ dbus_bool_t bus_selinux_allows_acquire_service (DBusConnection *connection,
    dbus_bool_t bus_selinux_allows_send            (DBusConnection
 *sender,
                                                  DBusConnection *proposed_recipient,
+						dbus_bool_t    requested_reply,
+						const char     *replycheck_verb,
  						const char     *msgtype, /* Supplementary audit data */
  						const char     *interface,
  						const char     *member,
@@ -66,4 +68,5 @@ dbus_bool_t bus_selinux_allows_send            (DBusConnection *sender,
  BusSELinuxID* bus_selinux_init_connection_id (DBusConnection *connection,
                                                DBusError      *error);
  +const char* bus_selinux_convert_replycheck_option(const char
 *replycheck_option);
  #endif /* BUS_SELINUX_H */
doc/busconfig.dtd +3 -0
index 8c5ac334..d8855b1e 100644
@@ -59,11 +59,13 @@
  <!ELEMENT limit (#PCDATA)>
  <!ATTLIST limit name CDATA #REQUIRED>
  -<!ELEMENT selinux (associate)*>
+<!ELEMENT selinux (associate|
+                   replycheck)*>
  <!ELEMENT associate EMPTY>
  <!ATTLIST associate
            own CDATA #REQUIRED
            context CDATA #REQUIRED>
+<!ELEMENT replycheck (#PCDATA)>
    <!ELEMENT apparmor EMPTY>
  <!ATTLIST apparmor
doc/dbus-daemon.1.xml.in +0 -0
index a9c0b5d5..62c3e334 100644
@@ -1154,6 +1154,7 @@ More details below.</para>
  <itemizedlist remap='TP'>
      <listitem><para><emphasis

remap='I'>&lt;associate&gt;</emphasis></para></listitem>

doc/dbus-daemon.1.xml.in +17 -0
+  <listitem><para><emphasis remap='I'>&lt;replycheck&gt;</emphasis></para></listitem>
 
  </itemizedlist>
@@ -1187,6 +1188,23 @@ Right now the default will be the security context of the bus itself.</para>
  <para>If two &lt;associate&gt; elements specify the same name, the element
  appearing later in the configuration file will be used.</para>
  +
+<para>The &lt;replycheck&gt; element controls how reply messages are checked.
+There are four options:</para>
+<literallayout remap='.nf'>
+      "send"                       : the same SELinux permission as for request
+                                     messages is used (the previous default)
+      "none"                       : reply messages are not checked
+      "reply"                      : reply messages are checked with a distinct
+                                     SELinux permission
+      "reply_with_fallback"        : reply messages are checked with a distinct
+                                     SELinux permission, if this permission is
+                                     defined in the loaded SELinux policy.
+                                     Otherwise the same permission as for request
+                                     messages is used
+</literallayout> <!-- .fi -->
+
+
  <itemizedlist remap='TP'>
      <listitem><para><emphasis

remap='I'>&lt;apparmor&gt;</emphasis></para></listitem>

doc/dbus-daemon.1.xml.in +2 -1
@@ -1425,7 +1443,8 @@ that class.</para>
  <para>First, any time a message is routed from one connection to another
  connection, the bus daemon will check permissions with the security context of
  the first connection as source, security context of the second connection
-as target, object class "dbus" and requested permission "send_msg".</para>
+as target, object class "dbus" and requested permission "send_msg" or "reply_msg",
+depending on the message type and the &lt;replycheck&gt; setting.</para>
 
  <para>If a security context is not available for a connection
test/data/valid-config-files/basic.conf +1 -0
index 5297097d..de68caaf 100644
@@ -27,6 +27,7 @@
           context="my_selinux_context_t"/>
          <associate own="org.freedesktop.BlahBlahBlah"
           context="foo_t"/>
+        <replycheck>reply_with_fallback</replycheck>
    </selinux>
    </busconfig>
 
Signature · 4 lines
gpg --locate-keys [email protected]
Key fingerprint = FCD2 3660 5D6B 9D27 7FC6  E0FF DA7E 521F 10F6 4098
https://sks-keyservers.net/pks/lookup?op=get&search=0xDA7E521F10F64098
Dominick Grift