dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add support for RZ/G2 M/N/H
PATCH 1/2 dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add support for RZ/G2 M/N/H
The datasheet for the RZ/G2 Series show the bit for choosing between a crystal oscillator and an external oscillator is present. Add the bindings for r8a774a1 (RZ/G2M), r8a774b1 (RZ/G2N), and r8a774e1 (RZ/G2H)
Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml +3 -0
@@ -35,6 +35,9 @@ properties: compatible: items: - enum: + - renesas,r8a774a1-rcar-usb2-clock-sel # RZ/G2M + - renesas,r8a774b1-rcar-usb2-clock-sel # RZ/G2N + - renesas,r8a774e1-rcar-usb2-clock-sel # RZ/G2H - renesas,r8a7795-rcar-usb2-clock-sel # R-Car H3 - renesas,r8a7796-rcar-usb2-clock-sel # R-Car M3-W - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+
Signature · 1 line
2.25.1
PATCH 2/2 arm64: dts: renesas: Add usb2_clksel to RZ/G2 M/N/H
Per the reference manal for the RZ/G Series, 2nd Generation, the RZ/G2M, RZ/G2N, and RZ/G2H have a bit that can be set to choose between a crystal oscillator and an external oscillator.
Because only boards that need this should enable it, it's marked as disabled by default for backwards compatibility with existing boards.
arch/arm64/boot/dts/renesas/r8a774a1.dtsi +15 -0
@@ -835,6 +835,21 @@ hsusb: usb@e6590000 { status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774a1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac";
arch/arm64/boot/dts/renesas/r8a774b1.dtsi +15 -0
@@ -709,6 +709,21 @@ hsusb: usb@e6590000 { status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774b1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774b1-usb-dmac", "renesas,usb-dmac";
arch/arm64/boot/dts/renesas/r8a774e1.dtsi +15 -0
@@ -890,6 +890,21 @@ hsusb: usb@e6590000 { status = "disabled"; }; + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a774e1-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0 0xe6590630 0 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal_clk>, <&usb3s0_clk>; + clock-names = "ehci_ohci", "hs-usb-if", + "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a774e1-usb-dmac", "renesas,usb-dmac";
Signature · 1 line
2.25.1
Re: [PATCH 2/2] arm64: dts: renesas: Add usb2_clksel to RZ/G2 M/N/H
Quoted 1 line · Adam Ford
Per the reference manal for the RZ/G Series, 2nd Generation,
manual
Quoted 8 lines
the RZ/G2M, RZ/G2N, and RZ/G2H have a bit that can be set to choose between a crystal oscillator and an external oscillator.
Because only boards that need this should enable it, it's marked as disabled by default for backwards compatibility with existing boards.
Signed-off-by Adam Ford <[email protected]>
i.e. will queue in renesas-devel for v5.12 (with the typo fixed).
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Re: [PATCH 2/2] arm64: dts: renesas: Add usb2_clksel to RZ/G2 M/N/H
Quoted 8 lines · Geert Uytterhoeven
Quoted 1 line · Adam Ford
Per the reference manal for the RZ/G Series, 2nd Generation,
manual
Quoted 3 lines
the RZ/G2M, RZ/G2N, and RZ/G2H have a bit that can be set to choose between a crystal oscillator and an external oscillator.
Quoted 8 lines
Quoted 5 lines
Because only boards that need this should enable it, it's marked as disabled by default for backwards compatibility with existing boards.
Signed-off-by Adam Ford <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>i.e. will queue in renesas-devel for v5.12 (with the typo fixed).
(and the unneeded 'status = "disabled"' dropped).
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Re: [PATCH 2/2] arm64: dts: renesas: Add usb2_clksel to RZ/G2 M/N/H
Quoted 13 lines · Geert Uytterhoeven
Quoted 12 lines · Geert Uytterhoeven
Quoted 1 line · Adam Ford
Per the reference manal for the RZ/G Series, 2nd Generation,
manual
Quoted 7 lines
the RZ/G2M, RZ/G2N, and RZ/G2H have a bit that can be set to choose between a crystal oscillator and an external oscillator.
Because only boards that need this should enable it, it's marked as disabled by default for backwards compatibility with existing boards.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Signed-off-by Adam Ford <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>i.e. will queue in renesas-devel for v5.12 (with the typo fixed).
(and the unneeded 'status = "disabled"' dropped).
Please disregard that. Lazy Saturday morning...
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Quoted 5 lines · Adam Ford
The datasheet for the RZ/G2 Series show the bit for choosing between a crystal oscillator and an external oscillator is present. Add the bindings for r8a774a1 (RZ/G2M), r8a774b1 (RZ/G2N), and r8a774e1 (RZ/G2H)
Signed-off-by Adam Ford <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Quoted 6 lines · Adam Ford
The datasheet for the RZ/G2 Series show the bit for choosing between a crystal oscillator and an external oscillator is present. Add the bindings for r8a774a1 (RZ/G2M), r8a774b1 (RZ/G2N), and r8a774e1 (RZ/G2H)
Signed-off-by Adam Ford <[email protected]>
Quoted 9 lines · Rob Herring
Quoted 6 lines · Adam Ford
The datasheet for the RZ/G2 Series show the bit for choosing between a crystal oscillator and an external oscillator is present. Add the bindings for r8a774a1 (RZ/G2M), r8a774b1 (RZ/G2N), and r8a774e1 (RZ/G2H)
Signed-off-by Adam Ford <[email protected]>Acked-by Rob Herring <[email protected]>
Thanks, will queue in renesas-clk-for-v5.12.
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds