arm64: dts: fsl: use the new clockgen constants
Subsystems (2)
cover arm64: dts: fsl: use the new clockgen constants
Since commit 4cb15934ba05 ("clk: qoriq: provide constants for the type") there are constants for better readabilty. This series will use them for all arm64 device trees.
This is just a mechanical change. The change was done with the following script:
$ sed -e 's/<&clockgen 0 \([0-9]\)>/<\&clockgen QORIQ_CLK_SYSCLK \1>/g' \
-e 's/<&clockgen 1 \([0-9]\)>/<\&clockgen QORIQ_CLK_CMUX \1>/g' \
-e 's/<&clockgen 2 \([0-9]\)>/<\&clockgen QORIQ_CLK_HWACCEL \1>/g' \
-e 's/<&clockgen 3 \([0-9]\)>/<\&clockgen QORIQ_CLK_FMAN \1>/g' \
-e 's/<&clockgen 4 0>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>/g' \
-e 's/<&clockgen 4 1>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>/g' \
-e 's/<&clockgen 4 3>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>/g' \
-e 's/<&clockgen 4 7>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>/g' \
-e 's/<&clockgen 4 15>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>/g' \
-i \
arm64/boot/dts/freescale/fsl-ls1012a.dtsi \
arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts \
arm64/boot/dts/freescale/fsl-ls1028a.dtsi \
arm64/boot/dts/freescale/fsl-ls1043a.dtsi \
arm64/boot/dts/freescale/fsl-ls1046a.dtsi \
arm64/boot/dts/freescale/fsl-ls1088a.dtsi \
arm64/boot/dts/freescale/fsl-ls2080a.dtsi \
arm64/boot/dts/freescale/fsl-ls2088a.dtsi \
arm64/boot/dts/freescale/fsl-ls208xa.dtsi \
arm64/boot/dts/freescale/fsl-lx2160a.dtsi \
boot/dts/freescale/qoriq-fman3-0.dtsiAfterwards the changes were manually clean-up for proper indendation, the include file was added and split into individual commits per SoC.
Michael Walle (7):
arm64: dts: ls1012a: use constants in the clockgen phandle
arm64: dts: ls1028a: use constants in the clockgen phandle
arm64: dts: ls1043a: use constants in the clockgen phandle
arm64: dts: ls1046a: use constants in the clockgen phandle
arm64: dts: ls1088a: use constants in the clockgen phandle
arm64: dts: ls208xa: use constants in the clockgen phandle
arm64: dts: lx2160a: use constants in the clockgen phandle
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 60 +++++-- .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 5 +- .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 162 +++++++++++++----- .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 73 +++++--- .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 73 +++++--- .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 91 +++++++--- .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 17 +- .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +- .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 85 ++++++--- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 92 ++++++---- .../boot/dts/freescale/qoriq-fman3-0.dtsi | 6 +- 11 files changed, 465 insertions(+), 216 deletions(-)
Signature · 1 line
2.20.1
PATCH 1/7 arm64: dts: ls1012a: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.
--- .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 60 +++++++++++++------ 1 file changed, 43 insertions(+), 17 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +43 -17
@@ -7,6 +7,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h>
@@ -34,7 +35,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; #cooling-cells = <2>; cpu-idle-states = <&CPU_PH20>; };
@@ -148,7 +149,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 0>, <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };
@@ -156,7 +160,8 @@ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <0 62 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian;
@@ -174,7 +179,8 @@ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; reg = <0x0 0x1580000 0x0 0x10000>; interrupts = <0 65 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian;
@@ -341,7 +347,8 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; };
@@ -351,7 +358,8 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; };
@@ -362,7 +370,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled";
@@ -372,7 +381,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };
@@ -380,7 +390,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };
@@ -409,7 +420,7 @@ "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; big-endian; };
@@ -418,8 +429,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>, - <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 47>,
@@ -432,8 +449,14 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>, - <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 45>,
@@ -453,8 +476,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 3>, - <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; }; usb0: usb@2f00000 {
@@ -473,7 +498,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dma-coherent; status = "disabled"; };
Signature · 1 line
2.20.1
PATCH 2/7 arm64: dts: ls1028a: use constants in the clockgen phandle
In reply to Michael WalleNow that we have constants, use them. This is just a mechanical change.
--- .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 5 +- .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 162 +++++++++++++----- 2 files changed, 120 insertions(+), 47 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +4 -1
@@ -8,6 +8,8 @@ */ /dts-v1/; + +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls1028a-kontron-sl28.dts" / {
@@ -120,7 +122,8 @@ mclk: clock-mclk@f130080 { compatible = "fsl,vf610-sai-clock"; reg = <0x0 0xf130080 0x0 0x80>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; #clock-cells = <0>; }; };
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +116 -46
396 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH 3/7 arm64: dts: ls1043a: use constants in the clockgen phandle
In reply to Michael WalleNow that we have constants, use them. This is just a mechanical change.
--- .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 73 ++++++++++++------- .../boot/dts/freescale/qoriq-fman3-0.dtsi | 6 +- 2 files changed, 52 insertions(+), 27 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +48 -25
@@ -8,6 +8,7 @@ * Mingkai Hu <[email protected]> */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -44,7 +45,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -54,7 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -64,7 +65,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -74,7 +75,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -377,7 +378,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <0 99 0x4>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 0>, <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };
@@ -476,7 +480,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <0 64 0x4>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled";
@@ -489,7 +494,8 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <0 65 0x4>; clock-names = "dspi"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; spi-num-chipselects = <5>; big-endian; status = "disabled";
@@ -502,7 +508,8 @@ reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx";
@@ -516,7 +523,8 @@ reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };
@@ -527,7 +535,8 @@ reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <0 58 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };
@@ -538,7 +547,8 @@ reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <0 59 0x4>; clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };
@@ -546,28 +556,32 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <0 54 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <0 54 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart2: serial@21d0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; interrupts = <0 55 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; duart3: serial@21d0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; interrupts = <0 55 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; gpio1: gpio@2300000 {
@@ -679,7 +693,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; interrupts = <0 48 0x4>; - clocks = <&clockgen 0 0>; + clocks = <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg"; status = "disabled"; };
@@ -688,7 +702,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <0 49 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; };
@@ -697,7 +712,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <0 50 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; };
@@ -706,7 +722,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <0 51 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; };
@@ -715,7 +732,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <0 52 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; };
@@ -724,7 +742,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <0 53 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; };
@@ -733,7 +752,8 @@ compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "wdog"; big-endian; };
@@ -750,8 +770,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 0>, - <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; }; usb0: usb@2f00000 {
@@ -793,7 +815,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 69 0x4>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; dma-coherent; };
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +4 -2
@@ -6,6 +6,8 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> + fman0: fman@1a00000 { #address-cells = <1>; #size-cells = <1>;
@@ -15,7 +17,7 @@ fman0: fman@1a00000 { reg = <0x0 0x1a00000 0x0 0xfe000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 3 0>; + clocks = <&clockgen QORIQ_CLK_FMAN 0>; clock-names = "fmanclk"; fsl,qman-channel-range = <0x800 0x10>; ptimer-handle = <&ptp_timer0>;
@@ -81,6 +83,6 @@ ptp_timer0: ptp-timer@1afe000 { compatible = "fsl,fman-ptp-timer"; reg = <0x0 0x1afe000 0x0 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 3 0>; + clocks = <&clockgen QORIQ_CLK_FMAN 0>; fsl,extts-fifo; };
Signature · 1 line
2.20.1
PATCH 4/7 arm64: dts: ls1046a: use constants in the clockgen phandle
In reply to Michael WalleNow that we have constants, use them. This is just a mechanical change.
--- .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 73 ++++++++++++------- 1 file changed, 48 insertions(+), 25 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +48 -25
@@ -8,6 +8,7 @@ * Mingkai Hu <[email protected]> */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h>
@@ -39,7 +40,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -49,7 +50,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -59,7 +60,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -69,7 +70,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>;
@@ -295,7 +296,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -303,7 +307,7 @@ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian;
@@ -454,7 +458,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; spi-num-chipselects = <5>; big-endian; status = "disabled";
@@ -466,7 +471,8 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx";
@@ -479,7 +485,8 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -489,7 +496,8 @@ #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -499,7 +507,8 @@ #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -507,7 +516,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -515,7 +525,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0600 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -523,7 +534,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0500 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -531,7 +543,8 @@ compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21d0600 0x0 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; };
@@ -579,7 +592,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; status = "disabled"; };
@@ -588,7 +602,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; };
@@ -597,7 +612,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; };
@@ -606,7 +622,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; };
@@ -615,7 +632,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; };
@@ -624,7 +642,8 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; status = "disabled"; };
@@ -633,7 +652,8 @@ compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; big-endian; };
@@ -649,8 +669,10 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&clockgen 4 1>, - <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; usb0: usb@2f00000 {
@@ -689,7 +711,8 @@ <0x0 0x20140520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; }; msi1: msi-controller@1580000 {
Signature · 1 line
2.20.1
PATCH 5/7 arm64: dts: ls1088a: use constants in the clockgen phandle
In reply to Michael WalleNow that we have constants, use them. This is just a mechanical change.
--- .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 91 +++++++++++++------ 1 file changed, 64 insertions(+), 27 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +64 -27
@@ -7,6 +7,7 @@ * Harninder Rai <[email protected]> * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -39,7 +40,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -48,7 +49,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -57,7 +58,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -75,7 +76,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -84,7 +85,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x102>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -93,7 +94,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x103>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PH20>; #cooling-cells = <2>; };
@@ -279,7 +280,8 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; spi-num-chipselects = <6>; status = "disabled"; };
@@ -287,7 +289,8 @@ duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
@@ -295,7 +298,8 @@ duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
@@ -360,7 +364,8 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; };
@@ -370,7 +375,8 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; };
@@ -380,7 +386,8 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; };
@@ -390,7 +397,8 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; status = "disabled"; };
@@ -403,7 +411,10 @@ reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; };
@@ -412,7 +423,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clock-frequency = <0>; - clocks = <&clockgen 2 1>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian;
@@ -447,7 +458,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; };
@@ -698,7 +710,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; little-endian; fsl,extts-fifo; };
@@ -787,56 +800,80 @@ cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core1_watchdog: wdt@c010000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core2_watchdog: wdt@c020000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster1_core3_watchdog: wdt@c030000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core0_watchdog: wdt@c100000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core1_watchdog: wdt@c110000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core2_watchdog: wdt@c120000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; }; cluster2_core3_watchdog: wdt@c130000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; - clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; clock-names = "wdog_clk", "apb_pclk"; };
Signature · 1 line
2.20.1
PATCH 6/7 arm64: dts: ls208xa: use constants in the clockgen phandle
In reply to Michael WalleNow that we have constants, use them. This is just a mechanical change.
--- .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 17 ++-- .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 ++-- .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 85 ++++++++++++++----- 3 files changed, 81 insertions(+), 38 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +9 -8
@@ -9,6 +9,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls208xa.dtsi" &cpu {
@@ -16,7 +17,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>;
@@ -26,7 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>;
@@ -36,7 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>;
@@ -46,7 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>;
@@ -56,7 +57,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>;
@@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>;
@@ -76,7 +77,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; next-level-cache = <&cluster3_l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>;
@@ -86,7 +87,7 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>;
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +9 -8
@@ -9,6 +9,7 @@ * */ +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include "fsl-ls208xa.dtsi" &cpu {
@@ -16,7 +17,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>;
@@ -26,7 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; #cooling-cells = <2>;
@@ -36,7 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>;
@@ -46,7 +47,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; #cooling-cells = <2>;
@@ -56,7 +57,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; next-level-cache = <&cluster2_l2>; cpu-idle-states = <&CPU_PW20>; #cooling-cells = <2>;
@@ -66,7 +67,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; #cooling-cells = <2>;
@@ -76,7 +77,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>;
@@ -86,7 +87,7 @@ device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; #cooling-cells = <2>;
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +63 -22
223 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH 7/7 arm64: dts: lx2160a: use constants in the clockgen phandle
In reply to Michael WalleNow that we have constants, use them. This is just a mechanical change.
--- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 92 ++++++++++++------- 1 file changed, 57 insertions(+), 35 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +57 -35
@@ -4,6 +4,7 @@ // // Copyright 2018-2020 NXP +#include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x0>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -47,7 +48,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x1>; - clocks = <&clockgen 1 0>; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -64,7 +65,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x100>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -81,7 +82,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x101>; - clocks = <&clockgen 1 1>; + clocks = <&clockgen QORIQ_CLK_CMUX 1>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -98,7 +99,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x200>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -115,7 +116,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x201>; - clocks = <&clockgen 1 2>; + clocks = <&clockgen QORIQ_CLK_CMUX 2>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -132,7 +133,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x300>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -149,7 +150,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x301>; - clocks = <&clockgen 1 3>; + clocks = <&clockgen QORIQ_CLK_CMUX 3>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -166,7 +167,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x400>; - clocks = <&clockgen 1 4>; + clocks = <&clockgen QORIQ_CLK_CMUX 4>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -183,7 +184,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x401>; - clocks = <&clockgen 1 4>; + clocks = <&clockgen QORIQ_CLK_CMUX 4>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -200,7 +201,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x500>; - clocks = <&clockgen 1 5>; + clocks = <&clockgen QORIQ_CLK_CMUX 5>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -217,7 +218,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x501>; - clocks = <&clockgen 1 5>; + clocks = <&clockgen QORIQ_CLK_CMUX 5>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -234,7 +235,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x600>; - clocks = <&clockgen 1 6>; + clocks = <&clockgen QORIQ_CLK_CMUX 6>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -251,7 +252,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x601>; - clocks = <&clockgen 1 6>; + clocks = <&clockgen QORIQ_CLK_CMUX 6>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -268,7 +269,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x700>; - clocks = <&clockgen 1 7>; + clocks = <&clockgen QORIQ_CLK_CMUX 7>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -285,7 +286,7 @@ compatible = "arm,cortex-a72"; enable-method = "psci"; reg = <0x701>; - clocks = <&clockgen 1 7>; + clocks = <&clockgen QORIQ_CLK_CMUX 7>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>;
@@ -685,7 +686,8 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; status = "disabled"; };
@@ -697,7 +699,8 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; };
@@ -708,7 +711,8 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; };
@@ -719,7 +723,8 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; };
@@ -730,7 +735,8 @@ reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; status = "disabled"; };
@@ -742,7 +748,8 @@ reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; };
@@ -753,7 +760,8 @@ reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; };
@@ -764,7 +772,8 @@ reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 15>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; status = "disabled"; };
@@ -776,7 +785,10 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; clock-names = "fspi_en", "fspi"; status = "disabled"; };
@@ -787,7 +799,8 @@ #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <0>;
@@ -800,7 +813,8 @@ #size-cells = <0>; reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <1>;
@@ -813,7 +827,8 @@ #size-cells = <0>; reg = <0x0 0x2120000 0x0 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 7>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(8)>; clock-names = "dspi"; spi-num-chipselects = <5>; bus-num = <2>;
@@ -824,7 +839,8 @@ compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12;
@@ -837,7 +853,8 @@ compatible = "fsl,esdhc"; reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <0 63 0x4>; /* Level high type */ - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12;
@@ -973,7 +990,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; };
@@ -984,7 +1002,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; };
@@ -995,7 +1014,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; };
@@ -1006,7 +1026,8 @@ <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; dma-coherent; status = "disabled"; };
@@ -1279,7 +1300,8 @@ ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; little-endian; fsl,extts-fifo; };
Signature · 1 line
2.20.1
Shawn Guo
AppliedQuoted 32 lines · Michael Walle
Since commit
4cb15934ba05("clk: qoriq: provide constants for the type") there are constants for better readabilty. This series will use them for all arm64 device trees.This is just a mechanical change. The change was done with the following script:
$ sed -e 's/<&clockgen 0 \([0-9]\)>/<\&clockgen QORIQ_CLK_SYSCLK \1>/g' \ -e 's/<&clockgen 1 \([0-9]\)>/<\&clockgen QORIQ_CLK_CMUX \1>/g' \ -e 's/<&clockgen 2 \([0-9]\)>/<\&clockgen QORIQ_CLK_HWACCEL \1>/g' \ -e 's/<&clockgen 3 \([0-9]\)>/<\&clockgen QORIQ_CLK_FMAN \1>/g' \ -e 's/<&clockgen 4 0>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>/g' \ -e 's/<&clockgen 4 1>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>/g' \ -e 's/<&clockgen 4 3>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>/g' \ -e 's/<&clockgen 4 7>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>/g' \ -e 's/<&clockgen 4 15>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>/g' \ -i \ arm64/boot/dts/freescale/fsl-ls1012a.dtsi \ arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts \ arm64/boot/dts/freescale/fsl-ls1028a.dtsi \ arm64/boot/dts/freescale/fsl-ls1043a.dtsi \ arm64/boot/dts/freescale/fsl-ls1046a.dtsi \ arm64/boot/dts/freescale/fsl-ls1088a.dtsi \ arm64/boot/dts/freescale/fsl-ls2080a.dtsi \ arm64/boot/dts/freescale/fsl-ls2088a.dtsi \ arm64/boot/dts/freescale/fsl-ls208xa.dtsi \ arm64/boot/dts/freescale/fsl-lx2160a.dtsi \ boot/dts/freescale/qoriq-fman3-0.dtsiAfterwards the changes were manually clean-up for proper indendation, the include file was added and split into individual commits per SoC.
Quoted 8 lines
Michael Walle (7):
arm64: dts: ls1012a: use constants in the clockgen phandle
arm64: dts: ls1028a: use constants in the clockgen phandle
arm64: dts: ls1043a: use constants in the clockgen phandle
arm64: dts: ls1046a: use constants in the clockgen phandle
arm64: dts: ls1088a: use constants in the clockgen phandle
arm64: dts: ls208xa: use constants in the clockgen phandle
arm64: dts: lx2160a: use constants in the clockgen phandle
Applied all, thanks.