arm64: dts: imx8m: add spda bus
Subsystems (2)
cover arm64: dts: imx8m: add spda bus
From: Peng Fan <[email protected]>
There is spba bus in aips1 and aips3, each spba bus has some peripherals inside, add the spba bus node
Peng Fan (4):
arm64: dts: imx8mn: add spba bus node of aips3
arm64: dts: imx8mn: add spba bus node
arm64: dts: imx8mn: add spba bus node
arm64: dts: imx8mq: add spba bus node
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 362 ++++++++++---------- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 146 ++++---- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 386 +++++++++++----------- 3 files changed, 467 insertions(+), 427 deletions(-)
Signature · 1 line
2.28.0
PATCH 1/4 arm64: dts: imx8mn: add spba bus node of aips3
From: Peng Fan <[email protected]>
There is a spba bus inside aips3 space, add it.
--- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 148 ++++++++++++---------- 1 file changed, 78 insertions(+), 70 deletions(-)
arch/arm64/boot/dts/freescale/imx8mn.dtsi +78 -70
@@ -253,7 +253,7 @@ aips1: bus@30000000 { #size-cells = <1>; ranges; - spba: bus@30000000 { + spba1: bus@30000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>;
@@ -667,81 +667,89 @@ aips3: bus@30800000 { #size-cells = <1>; ranges; - ecspi1: spi@30820000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + spba2: bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, - <&clk IMX8MN_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; - ecspi2: spi@30830000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, - <&clk IMX8MN_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi1: spi@30820000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, + <&clk IMX8MN_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, - <&clk IMX8MN_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, + <&clk IMX8MN_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART1_ROOT>, - <&clk IMX8MN_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, + <&clk IMX8MN_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART3_ROOT>, - <&clk IMX8MN_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART1_ROOT>, + <&clk IMX8MN_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART2_ROOT>, - <&clk IMX8MN_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART3_ROOT>, + <&clk IMX8MN_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART2_ROOT>, + <&clk IMX8MN_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + } crypto: crypto@30900000 { compatible = "fsl,sec-v4.0";
Signature · 7 lines
2.28.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 2/4 arm64: dts: imx8mn: add spba bus node
In reply to [email protected]From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
--- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 362 +++++++++++----------- 1 file changed, 189 insertions(+), 173 deletions(-)
arch/arm64/boot/dts/freescale/imx8mm.dtsi +189 -173
@@ -269,117 +269,125 @@ aips1: bus@30000000 { #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; - sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30010000 0x10000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI1_IPG>, - <&clk IMX8MM_CLK_SAI1_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + + sai1: sai@30010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai2: sai@30020000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30020000 0x10000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI2_IPG>, - <&clk IMX8MM_CLK_SAI2_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai2: sai@30020000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai3: sai@30030000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30030000 0x10000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI3_IPG>, - <&clk IMX8MM_CLK_SAI3_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai5: sai@30050000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30050000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI5_IPG>, - <&clk IMX8MM_CLK_SAI5_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai5: sai@30050000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai6: sai@30060000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30060000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI6_IPG>, - <&clk IMX8MM_CLK_SAI6_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai6: sai@30060000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - micfil: audio-controller@30080000 { - compatible = "fsl,imx8mm-micfil"; - reg = <0x30080000 0x10000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_PDM_IPG>, - <&clk IMX8MM_CLK_PDM_ROOT>, - <&clk IMX8MM_AUDIO_PLL1_OUT>, - <&clk IMX8MM_AUDIO_PLL2_OUT>, - <&clk IMX8MM_CLK_EXT3>; - clock-names = "ipg_clk", "ipg_clk_app", - "pll8k", "pll11k", "clkext3"; - dmas = <&sdma2 24 25 0x80000000>; - dma-names = "rx"; - status = "disabled"; - }; + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>, + <&clk IMX8MM_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; - spdif1: spdif@30090000 { - compatible = "fsl,imx35-spdif"; - reg = <0x30090000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ - <&clk IMX8MM_CLK_24M>, /* rxtx0 */ - <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ - <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ - <&clk IMX8MM_CLK_DUMMY>; /* spba */ - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7", "spba"; - dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; - dma-names = "rx", "tx"; - status = "disabled"; + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MM_CLK_24M>, /* rxtx0 */ + <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MM_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; }; gpio1: gpio@30200000 {
@@ -660,80 +668,88 @@ aips3: bus@30800000 { ranges = <0x30800000 0x30800000 0x400000>, <0x8000000 0x8000000 0x10000000>; - ecspi1: spi@30820000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, - <&clk IMX8MM_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi2: spi@30830000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, - <&clk IMX8MM_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, - <&clk IMX8MM_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART1_ROOT>, - <&clk IMX8MM_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART3_ROOT>, - <&clk IMX8MM_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART2_ROOT>, - <&clk IMX8MM_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; }; crypto: crypto@30900000 {
Signature · 1 line
2.28.0
Re: [PATCH 2/4] arm64: dts: imx8mn: add spba bus node
Quoted 22 lines · On Tue, Dec 29, 2020 at 6:15 AM <[email protected]> wrote:
From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
Signed-off-by Peng Fan <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 362 +++++++++++----------- 1 file changed, 189 insertions(+), 173 deletions(-)arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-4@@ -269,117 +269,125 @@ aips1: bus@30000000 { #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; - sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30010000 0x10000>;
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 272
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +1
-9- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI1_IPG>, - <&clk IMX8MM_CLK_SAI1_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + bus@30000000 {
There is already a bus@30000000 (aips1), and I think the system doesn't like it when there are multiple busses with the same name.
There was some discussion on fixing the 8mn [1], but it doesn't look like it went anywhere.
I am guessing the Mini will need something similar to the nano.
[1] - https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
adam
Quoted 378 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +188
-161+ compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + + sai1: sai@30010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai2: sai@30020000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30020000 0x10000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI2_IPG>, - <&clk IMX8MM_CLK_SAI2_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai2: sai@30020000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai3: sai@30030000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30030000 0x10000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI3_IPG>, - <&clk IMX8MM_CLK_SAI3_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai5: sai@30050000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30050000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI5_IPG>, - <&clk IMX8MM_CLK_SAI5_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai5: sai@30050000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai6: sai@30060000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30060000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI6_IPG>, - <&clk IMX8MM_CLK_SAI6_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai6: sai@30060000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - micfil: audio-controller@30080000 { - compatible = "fsl,imx8mm-micfil"; - reg = <0x30080000 0x10000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_PDM_IPG>, - <&clk IMX8MM_CLK_PDM_ROOT>, - <&clk IMX8MM_AUDIO_PLL1_OUT>, - <&clk IMX8MM_AUDIO_PLL2_OUT>, - <&clk IMX8MM_CLK_EXT3>; - clock-names = "ipg_clk", "ipg_clk_app", - "pll8k", "pll11k", "clkext3"; - dmas = <&sdma2 24 25 0x80000000>; - dma-names = "rx"; - status = "disabled"; - }; + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>, + <&clk IMX8MM_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; - spdif1: spdif@30090000 { - compatible = "fsl,imx35-spdif"; - reg = <0x30090000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ - <&clk IMX8MM_CLK_24M>, /* rxtx0 */ - <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ - <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ - <&clk IMX8MM_CLK_DUMMY>; /* spba */ - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7", "spba"; - dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; - dma-names = "rx", "tx"; - status = "disabled"; + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MM_CLK_24M>, /* rxtx0 */ + <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MM_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; }; gpio1: gpio@30200000 {@@ -660,80 +668,88 @@ aips3: bus@30800000 { ranges = <0x30800000 0x30800000 0x400000>, <0x8000000 0x8000000 0x10000000>; - ecspi1: spi@30820000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, - <&clk IMX8MM_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi2: spi@30830000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, - <&clk IMX8MM_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, - <&clk IMX8MM_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART1_ROOT>, - <&clk IMX8MM_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART3_ROOT>, - <&clk IMX8MM_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART2_ROOT>, - <&clk IMX8MM_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; }; crypto: crypto@30900000 { --2.28.0
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 2/4] arm64: dts: imx8mn: add spba bus node
Quoted 37 lines · Adam Ford
Quoted 22 lines · On Tue, Dec 29, 2020 at 6:15 AM <[email protected]> wrote:
From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
Signed-off-by Peng Fan <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 362 +++++++++++----------- 1 file changed, 189 insertions(+), 173 deletions(-)arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-4@@ -269,117 +269,125 @@ aips1: bus@30000000 { #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; - sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30010000 0x10000>;arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 272
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +1
-9- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI1_IPG>, - <&clk IMX8MM_CLK_SAI1_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + bus@30000000 {There is already a bus@30000000 (aips1), and I think the system doesn't like it when there are multiple busses with the same name.
Quoted 6 lines
There was some discussion on fixing the 8mn [1], but it doesn't look like it went anywhere.
I am guessing the Mini will need something similar to the nano.
[1] - https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
Several replies from S.j. Wang are missing from LKML (and maybe patchwork?) but we reached a conclusion:
https://lore.kernel.org/linux-arm-kernel/20201208090601.GA8347@kozik-lap/
Either you do some remapping of address space or just rename the "bus" nodes (e.g. generic bus-1 or a specific spba-bus).
Best regards,
Krzysztof
RE: [PATCH 2/4] arm64: dts: imx8mn: add spba bus node
Quoted 72 lines
Subject: Re: [PATCH 2/4] arm64: dts: imx8mn: add spba bus node
Quoted 12 lines · Adam Ford
Quoted 11 lines · On Tue, Dec 29, 2020 at 6:15 AM <[email protected]> wrote:
From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
Signed-off-by Peng Fan <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 362 +++++++++++----------- 1 file changed, 189 insertions(+), 173 deletions(-)Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 270
Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-0@@ -269,117 +269,125 @@ aips1: bus@30000000 { #size-cells = <1>; ranges = <0x30000000 0x30000000
0x400000>;Quoted 4 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 {
Quoted 4 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-3- sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai","fsl,imx8mq-sai";
Quoted 2 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 275
Quoted 2 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-2- reg = <0x30010000 0x10000>; - interrupts = <GIC_SPI 95
IRQ_TYPE_LEVEL_HIGH>;Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 276
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- clocks = <&clk
IMX8MM_CLK_SAI1_IPG>,Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 277
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- <&clk
IMX8MM_CLK_SAI1_ROOT>,Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 278
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- <&clk
IMX8MM_CLK_DUMMY>, <&clkIMX8MM_CLK_DUMMY>;Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 279
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- clock-names = "bus", "mclk1","mclk2", "mclk3";
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 280
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- dmas = <&sdma2 0 2 0>, <&sdma21 2 0>;
Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 272
Quoted 4 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +1
-3- dma-names = "rx", "tx"; - status = "disabled"; - }; + bus@30000000 {There is already a bus@30000000 (aips1), and I think the system doesn't like it when there are multiple busses with the same name.
Quoted 8 lines
There was some discussion on fixing the 8mn [1], but it doesn't look like it went anywhere.
I am guessing the Mini will need something similar to the nano.
[1] -
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fpatch%2F1607324004-1 29
Quoted 1 line
60-1-git-send-email-shengjiu.wang%40nxp.com%2F&data=04%7C01%7 Cpeng
Quoted 1 line
.fan%40nxp.com%7C970d320f3ef7413296ed08d8ac1486f9%7C686ea1d3bc
2b4c6fa9Quoted 1 line
2cd99c5c301635%7C0%7C0%7C637448551481206715%7CUnknown%7CTW FpbGZsb3d8ey
Quoted 1 line
JWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D %7C200
Quoted 1 line
Quoted 6 lines
0&sdata=xKgYHCDyitbUyTPKVuwQV%2FCoJvepCbdBJ1MD9vP%2B6MY %3D&res
Quoted 1 line
erved=0
Several replies from S.j. Wang are missing from LKML (and maybe patchwork?) but we reached a conclusion:
Thanks for the pointing, I'll give a look. If S.J take it, I'll leave it to S.J.
Thanks,
Peng.
Quoted 14 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.ke
rnel.org%2Flinux-arm-kernel%2F20201208090601.GA8347%40kozik-lap%2F& amp;data=04%7C01%7Cpeng.fan%40nxp.com%7C970d320f3ef7413296ed08 d8ac1486f9%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63744 8551481206715%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=nk t0J5RtzA%2B29nK4aPnd434FNQV8MUZ%2F8Aq64o6hl6I%3D&reserved =0Either you do some remapping of address space or just rename the "bus" nodes (e.g. generic bus-1 or a specific spba-bus).
Best regards,
Krzysztof
Re: [PATCH 2/4] arm64: dts: imx8mn: add spba bus node
Quoted 73 lines · Peng Fan
Quoted 73 lines
Subject: Re: [PATCH 2/4] arm64: dts: imx8mn: add spba bus node
Quoted 12 lines · Adam Ford
Quoted 11 lines · On Tue, Dec 29, 2020 at 6:15 AM <[email protected]> wrote:
From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
Signed-off-by Peng Fan <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 362 +++++++++++----------- 1 file changed, 189 insertions(+), 173 deletions(-)Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 270
Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-0@@ -269,117 +269,125 @@ aips1: bus@30000000 { #size-cells = <1>; ranges = <0x30000000 0x30000000
0x400000>;Quoted 4 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 {
Quoted 4 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-3- sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai","fsl,imx8mq-sai";
Quoted 2 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 275
Quoted 2 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-2- reg = <0x30010000 0x10000>; - interrupts = <GIC_SPI 95
IRQ_TYPE_LEVEL_HIGH>;Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 276
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- clocks = <&clk
IMX8MM_CLK_SAI1_IPG>,Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 277
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- <&clk
IMX8MM_CLK_SAI1_ROOT>,Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 278
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- <&clk
IMX8MM_CLK_DUMMY>, <&clkIMX8MM_CLK_DUMMY>;Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 279
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- clock-names = "bus", "mclk1","mclk2", "mclk3";
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 280
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mm.dtsi +0
-1- dmas = <&sdma2 0 2 0>, <&sdma21 2 0>;
Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi aips1: bus@30000000 { · line 272
Quoted 4 lines
arch/arm64/boot/dts/freescale/imx8mm.dtsi +1
-3- dma-names = "rx", "tx"; - status = "disabled"; - }; + bus@30000000 {There is already a bus@30000000 (aips1), and I think the system doesn't like it when there are multiple busses with the same name.
Quoted 8 lines
There was some discussion on fixing the 8mn [1], but it doesn't look like it went anywhere.
I am guessing the Mini will need something similar to the nano.
[1] -
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fpatch%2F1607324004-1 29
Quoted 1 line
60-1-git-send-email-shengjiu.wang%40nxp.com%2F&data=04%7C01%7 Cpeng
Quoted 1 line
.fan%40nxp.com%7C970d320f3ef7413296ed08d8ac1486f9%7C686ea1d3bc
2b4c6fa9Quoted 1 line
2cd99c5c301635%7C0%7C0%7C637448551481206715%7CUnknown%7CTW FpbGZsb3d8ey
Quoted 1 line
JWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D %7C200
Quoted 1 line
Quoted 8 lines
Quoted 6 lines
0&sdata=xKgYHCDyitbUyTPKVuwQV%2FCoJvepCbdBJ1MD9vP%2B6MY %3D&res
Quoted 1 line
erved=0
Several replies from S.j. Wang are missing from LKML (and maybe patchwork?) but we reached a conclusion:
Thanks for the pointing, I'll give a look. If S.J take it, I'll leave it to S.J.
Peng or S.J,
I don't see this was ever finished. On the Nano, there is an spba-bus
under the aips1 bus, but I am not seeing anything on aips3 yet. It
appears to have been abandoned. The NXP kernel doesn't show either spba-bus on the imx8m Mini either, but the documentation for the Mini makes it look like it should work. Do you want me to submit a patch for any of this?
adam
Quoted 18 lines
Thanks,
Peng.Quoted 14 lines
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.ke
rnel.org%2Flinux-arm-kernel%2F20201208090601.GA8347%40kozik-lap%2F& amp;data=04%7C01%7Cpeng.fan%40nxp.com%7C970d320f3ef7413296ed08 d8ac1486f9%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63744 8551481206715%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=nk t0J5RtzA%2B29nK4aPnd434FNQV8MUZ%2F8Aq64o6hl6I%3D&reserved =0Either you do some remapping of address space or just rename the "bus" nodes (e.g. generic bus-1 or a specific spba-bus).
Best regards,
Krzysztof
PATCH 3/4 arm64: dts: imx8mn: add spba bus node
In reply to [email protected]From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
--- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mn.dtsi +1 -1
@@ -749,7 +749,7 @@ uart2: serial@30890000 { clock-names = "ipg", "per"; status = "disabled"; }; - } + }; crypto: crypto@30900000 { compatible = "fsl,sec-v4.0";
Signature · 1 line
2.28.0
Re: [PATCH 3/4] arm64: dts: imx8mn: add spba bus node
Quoted 3 lines · On Tue, Dec 29, 2020 at 08:00:44PM +0800, [email protected] wrote:
From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
This does not look like matching contents of commit.
Best regards,
Krzysztof
Quoted 22 lines
Signed-off-by Peng Fan <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mn.dtsi +1
-1@@ -749,7 +749,7 @@ uart2: serial@30890000 { clock-names = "ipg", "per"; status = "disabled"; }; - } + }; crypto: crypto@30900000 { compatible = "fsl,sec-v4.0";Signature · 1 line
2.28.0
RE: [PATCH 3/4] arm64: dts: imx8mn: add spba bus node
Quoted 8 lines
Subject: Re: [PATCH 3/4] arm64: dts: imx8mn: add spba bus node
Quoted 3 lines · On Tue, Dec 29, 2020 at 08:00:44PM +0800, [email protected] wrote:
From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
This does not look like matching contents of commit.
Posted in a rush. Forgot to squash commits.
Thanks,
Peng.
Quoted 28 lines
Best regards,
KrzysztofReview
Quoted 7 lines
Signed-off-by Peng Fan <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)(quoted diff) +0
-0
b/arch/arm64/boot/dts/freescale/imx8mn.dtsiQuoted 15 lines
index
73602832ccaa..033fa90570ff100644arch/arm64/boot/dts/freescale/imx8mn.dtsi +1
-2@@ -749,7 +749,7 @@ uart2: serial@30890000 { clock-names = "ipg", "per"; status = "disabled"; }; - } + }; crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; --2.28.0
PATCH 4/4 arm64: dts: imx8mq: add spba bus node
In reply to [email protected]From: Peng Fan <[email protected]>
According to RM, there is a spba bus inside aips3 and aips1, add it.
--- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 386 +++++++++++----------- 1 file changed, 201 insertions(+), 185 deletions(-)
arch/arm64/boot/dts/freescale/imx8mq.dtsi +201 -185
@@ -299,60 +299,68 @@ bus@30000000 { /* AIPS1 */ #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; - sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai"; - reg = <0x30010000 0x10000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_SAI1_IPG>, - <&clk IMX8MQ_CLK_SAI1_ROOT>, - <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + + sai1: sai@30010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI1_IPG>, + <&clk IMX8MQ_CLK_SAI1_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai6: sai@30030000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai"; - reg = <0x30030000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_SAI6_IPG>, - <&clk IMX8MQ_CLK_SAI6_ROOT>, - <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai6: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI6_IPG>, + <&clk IMX8MQ_CLK_SAI6_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai5: sai@30040000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai"; - reg = <0x30040000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_SAI5_IPG>, - <&clk IMX8MQ_CLK_SAI5_ROOT>, - <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai5: sai@30040000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30040000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI5_IPG>, + <&clk IMX8MQ_CLK_SAI5_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai4: sai@30050000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai"; - reg = <0x30050000 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_SAI4_IPG>, - <&clk IMX8MQ_CLK_SAI4_ROOT>, - <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; + sai4: sai@30050000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI4_IPG>, + <&clk IMX8MQ_CLK_SAI4_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; }; gpio1: gpio@30200000 {
@@ -793,149 +801,157 @@ bus@30800000 { /* AIPS3 */ ranges = <0x30800000 0x30800000 0x400000>, <0x08000000 0x08000000 0x10000000>; - spdif1: spdif@30810000 { - compatible = "fsl,imx35-spdif"; - reg = <0x30810000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ - <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ - <&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ - <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ - <&clk IMX8MQ_CLK_DUMMY>; /* spba */ - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7", "spba"; - dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi1: spi@30820000 { + bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, - <&clk IMX8MQ_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; + + spdif1: spdif@30810000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30810000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ + <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ + <&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MQ_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi2: spi@30830000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>, - <&clk IMX8MQ_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi1: spi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, + <&clk IMX8MQ_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>, - <&clk IMX8MQ_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>, + <&clk IMX8MQ_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mq-uart", - "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, - <&clk IMX8MQ_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>, + <&clk IMX8MQ_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mq-uart", - "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, - <&clk IMX8MQ_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, + <&clk IMX8MQ_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mq-uart", - "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, - <&clk IMX8MQ_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, + <&clk IMX8MQ_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - spdif2: spdif@308a0000 { - compatible = "fsl,imx35-spdif"; - reg = <0x308a0000 0x10000>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ - <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ - <&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ - <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ - <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ - <&clk IMX8MQ_CLK_DUMMY>; /* spba */ - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7", "spba"; - dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart2: serial@30890000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, + <&clk IMX8MQ_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - sai2: sai@308b0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai"; - reg = <0x308b0000 0x10000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, - <&clk IMX8MQ_CLK_SAI2_ROOT>, - <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + spdif2: spdif@308a0000 { + compatible = "fsl,imx35-spdif"; + reg = <0x308a0000 0x10000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ + <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ + <&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MQ_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai3: sai@308c0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai"; - reg = <0x308c0000 0x10000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, - <&clk IMX8MQ_CLK_SAI3_ROOT>, - <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>; - dma-names = "rx", "tx"; - status = "disabled"; + sai2: sai@308b0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x308b0000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, + <&clk IMX8MQ_CLK_SAI2_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@308c0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, + <&clk IMX8MQ_CLK_SAI3_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; }; crypto: crypto@30900000 {
Signature · 7 lines
2.28.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel