ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
PATCH 1/1 ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
We may lose edge interrupts for gpio banks other than the first gpio bank as they are not always powered. Instead, we must use the padconf interrupt as that is always powered.
Note that we still also use the gpio for reading the pin state as that can't be done with the padconf device.
Signed-off-by Tony Lindgren <[email protected]>
--- arch/arm/boot/dts/omap4-droid4-xt894.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/omap4-droid4-xt894.dts +5 -0
@@ -16,8 +16,13 @@ volume_down { debounce-interval = <10>; }; + /* + * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead + * of the gpio interrupt to avoid lost events in deeper idle states. + */ slider { label = "Keypad Slide"; + interrupts-extended = <&omap4_pmx_core 0xd6>; gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>;
Signature · 1 line
2.29.2