ARM: dts: qcom: msm8974: add gpu support
Subsystems (2)
PATCH 1/4 ARM: dts: qcom: msm8974: add gpu support
From: Brian Masney <[email protected]>
Add support for the a3xx GPU
--- arch/arm/boot/dts/qcom-msm8974.dtsi | 45 +++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
arch/arm/boot/dts/qcom-msm8974.dtsi +45 -0
@@ -1399,6 +1399,51 @@ cnoc: interconnect@fc480000 { <&rpmcc RPM_SMD_CNOC_A_CLK>; }; + gpu_opp_table: opp_table { + status = "disabled"; + + compatible = "operating-points-v2"; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + }; + }; + + gpu: adreno@fdb00000 { + status = "disabled"; + + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", + "ocmem"; + + // iommus = <&gpu_iommu 0>; + }; + mdss: mdss@fd900000 { status = "disabled";
base-commit: d7a03a44a5e93f39ece70ec75d25c6088caa0fdb
prerequisite-patch-id: aba6f684932cab35d98457c21e4ff7a5ac75c753
prerequisite-patch-id: 4884d57df1bd197896b69e115d9002d6c26ae2e2
prerequisite-patch-id: 4f1aba3c3675236b18578eedbe71b0cdca01ed77
prerequisite-patch-id: cbfe6ccfebb142370baff15bbdf3cf2f34ee77df
Signature · 1 line
2.29.2
PATCH 2/4 ARM: dts: qcom: msm8974-klte: add support for GPU
From: Samuel Pascua <[email protected]>
--- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +8 -0
@@ -697,6 +697,14 @@ fuelgauge@36 { pinctrl-0 = <&fuelgauge_pin>; }; }; + + opp_table { + status = "ok"; + }; + + adreno@fdb00000 { + status = "ok"; + }; }; &spmi_bus {
Signature · 1 line
2.29.2
PATCH 3/4 ARM: dts: qcom: msm8974-klte: add support for display
In reply to Iskren ChernevFrom: Samuel Pascua <[email protected]>
Add initial support for the display found on the Samsung Galaxy 5 (klte) phone. This is based on work from Jonathan Marek & Brian Masney.
Please note that this patch depends on dt-binding patch in [1]
[1] https://lkml.org/lkml/2020/12/30/293
--- .../boot/dts/qcom-msm8974-samsung-klte.dts | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+)
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +58 -0
@@ -453,6 +453,16 @@ int { bias-pull-down; }; }; + + panel_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhc_1: sdhci@f9824900 {
@@ -705,6 +715,54 @@ opp_table { adreno@fdb00000 { status = "ok"; }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pma8084_l12>; + }; + }; }; &spmi_bus {
Signature · 1 line
2.29.2
PATCH 4/4 ARM: dts: qcom: msm8974-klte: Mark essential regulators
In reply to Iskren Chernevs1 and l12 regulators are used for the memory and cache on the Samsung S5 (klte). If they are turned off the phone shuts down. So mark them as always-on to prevent that from happening.
--- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +2 -0
@@ -30,6 +30,7 @@ pma8084-regulators { pma8084_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; + regulator-always-on; }; pma8084_s2: s2 {
@@ -115,6 +116,7 @@ pma8084_l11: l11 { pma8084_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; pma8084_l13: l13 {
Signature · 1 line
2.29.2
Re: [PATCH 4/4] ARM: dts: qcom: msm8974-klte: Mark essential regulators
This indeed fixes device freeze+reboot issue when display powers off.
Quoted 9 lines · Iskren Chernev
s1 and l12 regulators are used for the memory and cache on the Samsung S5 (klte). If they are turned off the phone shuts down. So mark them as always-on to prevent that from happening.
Signed-off-by Iskren Chernev <[email protected]>--- arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 2 ++ 1 file changed, 2 insertions(+)
Quoted 5 lines · Iskren Chernev
From: Brian Masney <[email protected]>
Add support for the a3xx GPU
Signed-off-by Brian Masney <[email protected]>
Tested these patches on Samsung Galaxy S5 along with other patches that add panel driver and enable vram carve-out option on this device.
Quoted 9 lines · Iskren Chernev
From: Brian Masney <[email protected]>
Add support for the a3xx GPU
Signed-off-by Brian Masney <[email protected]>--- arch/arm/boot/dts/qcom-msm8974.dtsi | 45 +++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
Quoted 5 lines · Iskren Chernev
From: Brian Masney <[email protected]>
Add support for the a3xx GPU
Signed-off-by Brian Masney <[email protected]>
As discussed on IRC I'm waiting for a respin of this with your S-o-b added after Brian's.
Thanks,
Bjorn
Quoted 69 lines
--- arch/arm/boot/dts/qcom-msm8974.dtsi | 45 +++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)arch/arm/boot/dts/qcom-msm8974.dtsi +45
-0@@ -1399,6 +1399,51 @@ cnoc: interconnect@fc480000 { <&rpmcc RPM_SMD_CNOC_A_CLK>; }; + gpu_opp_table: opp_table { + status = "disabled"; + + compatible = "operating-points-v2"; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + }; + }; + + gpu: adreno@fdb00000 { + status = "disabled"; + + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", + "ocmem"; + + // iommus = <&gpu_iommu 0>; + }; + mdss: mdss@fd900000 { status = "disabled";base-commit:
d7a03a44a5e93f39ece70ec75d25c6088caa0fdb
prerequisite-patch-id:aba6f684932cab35d98457c21e4ff7a5ac75c753
prerequisite-patch-id:4884d57df1bd197896b69e115d9002d6c26ae2e2
prerequisite-patch-id:4f1aba3c3675236b18578eedbe71b0cdca01ed77
prerequisite-patch-id:cbfe6ccfebb142370baff15bbdf3cf2f34ee77dfSignature · 1 line
2.29.2