firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt
Subsystems (2)
v4 cover firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt
v4 -- s/message-serviced/a2p/ in the bindings commit message.
-- Changed author/s-o-b/committer email address as my company is now
appending boilerplate text to all outgoing emails.
v3 -- Changed interrupt name from "message-serviced" to "a2p" (RobH)
v2 -- Correct commit message, s/msg/message/, and remove extra WS on
"dt-bindings" commit (Sudeep)
-- Change interrupt name to "message-serviced", move irq assignent to end
of function. (Sudeep)
v1 -- original.
Jim Quinlan (2):
dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt
.../devicetree/bindings/arm/arm,scmi.txt | 8 ++++ drivers/firmware/arm_scmi/smc.c | 38 ++++++++++++++++++- 2 files changed, 45 insertions(+), 1 deletion(-)
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v4 1/2 dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
In normal use of smc/hvc transport in SCMI the message completion is indicated by the return of the SMC call. This commit provides for an optional interrupt named "a2p" which is used instead to indicate the completion of a message.
--- Documentation/devicetree/bindings/arm/arm,scmi.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/arm,scmi.txt +8 -0
@@ -31,6 +31,14 @@ Optional properties: - mbox-names: shall be "tx" or "rx" depending on mboxes entries. +- interrupts : when using smc or hvc transports, this optional + property indicates that msg completion by the platform is indicated + by an interrupt rather than by the return of the smc call. This + should not be used except when the platform requires such behavior. + +- interrupt-names : if "interrupts" is present, interrupt-names must also + be present and have the value "a2p". + See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details about the generic mailbox controller and client driver bindings.
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v4 1/2] dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
Quoted 6 lines · Jim Quinlan
In normal use of smc/hvc transport in SCMI the message completion is indicated by the return of the SMC call. This commit provides for an optional interrupt named "a2p" which is used instead to indicate the completion of a message.
Signed-off-by Jim Quinlan <[email protected]>
Signature · 6 lines
Florian _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v4 1/2] dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
In reply to Jim QuinlanQuoted 10 lines · Jim Quinlan
In normal use of smc/hvc transport in SCMI the message completion is indicated by the return of the SMC call. This commit provides for an optional interrupt named "a2p" which is used instead to indicate the completion of a message.
Signed-off-by Jim Quinlan <[email protected]>--- Documentation/devicetree/bindings/arm/arm,scmi.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
PATCH v4 2/2 firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt
In reply to Jim QuinlanThe SMC/HVC SCMI transport is modified to allow the completion of an SCMI message to be indicated by an interrupt rather than the return of the smc call. This accommodates the existing behavior of the BrcmSTB SCMI "platform" whose SW is already out in the field and cannot be changed.
--- drivers/firmware/arm_scmi/smc.c | 38 ++++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-)
drivers/firmware/arm_scmi/smc.c +37 -1
@@ -9,9 +9,11 @@#include <linux/arm-smccc.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/interrupt.h> #include <linux/mutex.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/slab.h> #include "common.h"
@@ -23,6 +25,8 @@* @shmem: Transmit/Receive shared memory area * @shmem_lock: Lock to protect access to Tx/Rx shared memory area * @func_id: smc/hvc call function id +* @irq: Optional; employed when platforms indicates msg completion by intr. +* @tx_complete: Optional, employed only when irq is valid. */ struct scmi_smc {
@@ -30,8 +34,19 @@ struct scmi_smc {struct scmi_shared_mem __iomem *shmem;struct mutex shmem_lock;u32 func_id; +int irq; +struct completion tx_complete; }; +static irqreturn_t smc_msg_done_isr (int irq,void *data) +{ +struct scmi_smc *scmi_info = data; + +complete (&scmi_info->tx_complete); + +return IRQ_HANDLED ; +} +static bool smc_chan_available (struct device *dev,int idx) {struct device_node *np =of_parse_phandle (dev->of_node,"shmem" ,0 );
@@ -51,7 +66,7 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,struct resource res;struct device_node *np;u32 func_id; -int ret; +int ret, irq =0 ;if (!tx)return -ENODEV ;
@@ -79,10 +94,29 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,if (ret <0 )return ret; +/* +* If there is an interrupt named "a2p", then the +* service and completion of a message is signaled by an interrupt +* rather than by the return of the SMC call. +*/ + ret =of_irq_get_byname (cdev->of_node,"a2p" ); +if (ret >0 ) { + irq = ret; + ret =devm_request_irq (dev, irq, smc_msg_done_isr, +IRQF_NO_SUSPEND , +dev_name (dev), + scmi_info); +if (ret) { +dev_err (dev,"failed to setup SCMI smc irq\n" ); +return ret; + } +init_completion (&scmi_info->tx_complete); + } scmi_info->func_id = func_id; scmi_info->cinfo = cinfo;mutex_init (&scmi_info->shmem_lock); cinfo->transport_info = scmi_info; + scmi_info->irq = irq;return 0 ; }
@@ -111,6 +145,8 @@ static int smc_send_message(struct scmi_chan_info *cinfo,shmem_tx_prepare (scmi_info->shmem, xfer);arm_smccc_1_1_invoke (scmi_info->func_id,0 ,0 ,0 ,0 ,0 ,0 ,0 , &res); +if (scmi_info->irq) +wait_for_completion (&scmi_info->tx_complete);scmi_rx_callback (scmi_info->cinfo,shmem_read_header (scmi_info->shmem));mutex_unlock (&scmi_info->shmem_lock);
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 6 lines · Jim Quinlan
The SMC/HVC SCMI transport is modified to allow the completion of an SCMI message to be indicated by an interrupt rather than the return of the smc call. This accommodates the existing behavior of the BrcmSTB SCMI "platform" whose SW is already out in the field and cannot be changed.
Signed-off-by Jim Quinlan <[email protected]>
This looks good to me, just one question below:
[snip]
drivers/firmware/arm_scmi/smc.c static int smc_send_message(struct scmi_chan_info *cinfo, · line 149
Quoted 6 lines
drivers/firmware/arm_scmi/smc.c +2
-0@@ -111,6 +145,8 @@ static int smc_send_message(struct scmi_chan_info *cinfo,shmem_tx_prepare (scmi_info->shmem, xfer);arm_smccc_1_1_invoke (scmi_info->func_id,0 ,0 ,0 ,0 ,0 ,0 ,0 , &res); +if (scmi_info->irq) +wait_for_completion (&scmi_info->tx_complete);
Do we need this to have a preceding call to reinit_completion()? It does not look like this is going to make any practical difference but there are drivers doing that for correctness.
Signature · 1 line
Florian
Quoted 17 lines · Florian Fainelli
Quoted 6 lines · Jim Quinlan
The SMC/HVC SCMI transport is modified to allow the completion of an SCMI message to be indicated by an interrupt rather than the return of the smc call. This accommodates the existing behavior of the BrcmSTB SCMI "platform" whose SW is already out in the field and cannot be changed.
Signed-off-by Jim Quinlan <[email protected]>This looks good to me, just one question below:
[snip]
Quoted 3 lines
(quoted diff) +0
-0@@ -111,6 +145,8 @@ static int smc_send_message(struct scmi_chan_info *cinfo, shmem_tx_prepare(scmi_info->shmem, xfer);
Quoted 7 lines
Review static int smc_send_message(struct scmi_chan_info *cinfo, · line 149
Quoted 3 lines
(quoted diff) +2
-0arm_smccc_1_1_invoke(scmi_info->func_id, 0, 0, 0, 0, 0, 0, 0, &res); + if (scmi_info->irq) + wait_for_completion(&scmi_info->tx_complete);Do we need this to have a preceding call to
reinit_completion()? It does not look like this is going to make any practical difference but there are drivers doing that for correctness.
Why do you think that might not cause any issue ? After first message is completed and ISR is executed, the completion flag remains done for ever. So practically 2nd message onwards won't block in wait_for_completion which means return from smc/hvc is actually completion too which is clearly wrong or am I missing something ?
Jim, please confirm either way. If you agree I can add the below snippet, no need to repost.
Regards,
Sudeep
--
drivers/firmware/arm_scmi/smc.c +2 -0
@@ -144,6 +145,8 @@ static int smc_send_message(struct scmi_chan_info *cinfo,shmem_tx_prepare (scmi_info->shmem, xfer); +if (scmi_info->irq) +reinit_completion (&scmi_info->tx_complete);arm_smccc_1_1_invoke (scmi_info->func_id,0 ,0 ,0 ,0 ,0 ,0 ,0 , &res);if (scmi_info->irq)wait_for_completion (&scmi_info->tx_complete);
A message that is not in the archive (sent off-list or not yet received): CA+-6iNwnA+3kaHom3XRpTLOu_4QsHOmFiZ2M2=sA7Go-uADe1g@mail.gmail.com
Quoted 33 lines
From: Sudeep Holla <[email protected]>
Date: Tue, Jan 5, 2021 at 12:35 PM
Subject: Re: [PATCH v4 2/2] firmware:arm_scmi: Augment SMC/HVC to allow optional interrupt
To: Florian Fainelli <[email protected]>
Cc: Jim Quinlan <[email protected]>, Sudeep Holla <[email protected]>, <[email protected]>, <[email protected]>, open list:SYSTEM CONTROL & POWER/MANAGEMENT INTERFACE Mes... <[email protected]>, open list <[email protected]>Quoted 17 lines · Florian Fainelli
Quoted 6 lines · Jim Quinlan
The SMC/HVC SCMI transport is modified to allow the completion of an SCMI message to be indicated by an interrupt rather than the return of the smc call. This accommodates the existing behavior of the BrcmSTB SCMI "platform" whose SW is already out in the field and cannot be changed.
Signed-off-by Jim Quinlan <[email protected]>This looks good to me, just one question below:
[snip]
Quoted 3 lines
drivers/firmware/arm_scmi/smc.c +0
-0@@ -111,6 +145,8 @@ static int smc_send_message(struct scmi_chan_info *cinfo,shmem_tx_prepare (scmi_info->shmem, xfer);Quoted 7 lines
Review static int smc_send_message(struct scmi_chan_info *cinfo, · line 149
Quoted 3 lines
(quoted diff) +2
-0arm_smccc_1_1_invoke(scmi_info->func_id, 0, 0, 0, 0, 0, 0, 0, &res); + if (scmi_info->irq) + wait_for_completion(&scmi_info->tx_complete);Do we need this to have a preceding call to
reinit_completion()? It does not look like this is going to make any practical difference but there are drivers doing that for correctness.
Quoted 3 lines
Why do you think that might not cause any issue ? After first message is completed and ISR is executed, the completion flag remains done for ever.
Hi Sudeep,
I don't think that is the case; the bottom routine, do_wait_for_common(), decrements the x->done after a completion (which does an increment). Regardless, I think it is prudent to add the reinit patch you've provided below.
BTW, one thing I could have done was incorporate the timeout value but I thought that since this is the "fast" call we shouldn't be timing out at all.
Thanks much,
Jim Quinlan
Broadcom STB
So practically 2nd message onwards won't block in wait_for_completion
Quoted 26 lines
which means return from smc/hvc is actually completion too which is clearly wrong or am I missing something ?
Jim, please confirm either way. If you agree I can add the below snippet, no need to repost.
Regards,
Sudeep--
drivers/firmware/arm_scmi/smc.c +2
-0@@ -144,6 +145,8 @@ static int smc_send_message(struct scmi_chan_info *cinfo,shmem_tx_prepare (scmi_info->shmem, xfer); +if (scmi_info->irq) +reinit_completion (&scmi_info->tx_complete);arm_smccc_1_1_invoke (scmi_info->func_id,0 ,0 ,0 ,0 ,0 ,0 ,0 , &res);if (scmi_info->irq)wait_for_completion (&scmi_info->tx_complete);This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.
On Tue, Jan 05, 2021 at 01:32:49PM -0500, Jim Quinlan wrote:
[...]
Quoted 6 lines
I don't think that is the case; the bottom routine,
do_wait_for_common(), decrements thex->doneafter a completion (which does an increment). Regardless, I think it is prudent to add the reinit patch you've provided below.
Ah right, but I will add that.
Quoted 4 lines
BTW, one thing I could have done was incorporate the timeout value but I thought that since this is the "fast" call we shouldn't be timing out at all.
Agreed, we can add it later. However it is not related to fast call, it is more for protection against failure of delivery of interrupt from the platform or any firmware responsible IMO.
Quoted 11 lines
Quoted 11 lines
This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.
I am assuming this was unintentional and ignoring. If not disregard my response. Otherwise you may need to fix your mail server.
--
Regards,
Sudeep
Quoted 35 lines · Sudeep Holla
On Tue, Jan 05, 2021 at 01:32:49PM -0500, Jim Quinlan wrote:
[...]
Quoted 6 lines
I don't think that is the case; the bottom routine,
do_wait_for_common(), decrements thex->doneafter a completion (which does an increment). Regardless, I think it is prudent to add the reinit patch you've provided below.Ah right, but I will add that.
Quoted 4 lines
BTW, one thing I could have done was incorporate the timeout value but I thought that since this is the "fast" call we shouldn't be timing out at all.
Agreed, we can add it later. However it is not related to fast call, it is more for protection against failure of delivery of interrupt from the platform or any firmware responsible IMO.
Quoted 11 lines
Quoted 11 lines
This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.
Quoted 2 lines
I am assuming this was unintentional and ignoring. If not disregard my response. Otherwise you may need to fix your mail server.
Hi Sudeep,
Yes please ignore the above legalize in my email -- our company is attaching this text to all outgoing emails. We are working on a general solution.
Regards,
Jim Quinlan
Broadcom STB
Quoted 4 lines
--
Regards,
Sudeep
Hi Sudeep,
Since RobH has reviewed patch 1/.2 and Florian has acked it, can you please accept patches 1 & 2?
Thanks,
Jim Quinlan
Broadcom STB
Quoted 25 lines · Jim Quinlan
v4 -- s/message-serviced/a2p/ in the bindings commit message.
-- Changed author/s-o-b/committer email address as my company is now
appending boilerplate text to all outgoing emails.v3 -- Changed interrupt name from "message-serviced" to "a2p" (RobH)
v2 -- Correct commit message, s/msg/message/, and remove extra WS on
"dt-bindings" commit (Sudeep)
-- Change interrupt name to "message-serviced", move irq assignent to end
of function. (Sudeep)v1 -- original.
Jim Quinlan (2):
dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
firmware:arm_scmi: Augment SMC/HVC to allow optional interrupt.../devicetree/bindings/arm/arm,scmi.txt | 8 ++++ drivers/firmware/arm_scmi/smc.c | 38 ++++++++++++++++++- 2 files changed, 45 insertions(+), 1 deletion(-)--
2.17.1
Quoted 5 lines · Jim Quinlan
Hi Sudeep,
Since RobH has reviewed patch 1/.2 and Florian has acked it, can you please accept patches 1 & 2?
Sure, will start queuing patches later this week, will let you know when I apply. Thanks.
Signature · 7 lines
Regards, Sudeep _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Sudeep Holla
AppliedQuoted 4 lines · Jim Quinlan
v4 -- s/message-serviced/a2p/ in the bindings commit message.
-- Changed author/s-o-b/committer email address as my company is now
appending boilerplate text to all outgoing emails.
Quoted 8 lines
v3 -- Changed interrupt name from "message-serviced" to "a2p" (RobH)
v2 -- Correct commit message, s/msg/message/, and remove extra WS on
"dt-bindings" commit (Sudeep)
-- Change interrupt name to "message-serviced", move irq assignent to end
of function. (Sudeep)[...]
Applied to sudeep.holla/linux (for-next/scmi), thanks!
[1/2] dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
https://git.kernel.org/sudeep.holla/c/99a064fb3a [2/2] firmware: arm_scmi: Augment SMC/HVC to allow optional interrupt https://git.kernel.org/sudeep.holla/c/dd820ee21d
--
Regards,
Sudeep