qed: select CONFIG_CRC32
Subsystems (6)
PATCH 1/7 qed: select CONFIG_CRC32
From: Arnd Bergmann <[email protected]>
Without this, the driver fails to link:
lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump':
qed_debug.c:(.text+0x4068): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump':
qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump':
qed_debug.c:(.text+0x6000): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump':
qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow
--- drivers/net/ethernet/qlogic/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/qlogic/Kconfig +1 -0
@@ -78,6 +78,7 @@ config QED depends on PCI select ZLIB_INFLATE select CRC8 + select CRC32 select NET_DEVLINK help This enables the support for Marvell FastLinQ adapters family.
Signature · 1 line
2.29.2
PATCH 2/7 phy: dp83640: select CONFIG_CRC32
From: Arnd Bergmann <[email protected]>
Without crc32, this driver fails to link:
arm-linux-gnueabi-ld: drivers/net/phy/dp83640.o: in function `match':
dp83640.c:(.text+0x476c): undefined reference to `crc32_le'
--- drivers/ptp/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/ptp/Kconfig +1 -0
@@ -64,6 +64,7 @@ config DP83640_PHY depends on NETWORK_PHY_TIMESTAMPING depends on PHYLIB depends on PTP_1588_CLOCK + select CRC32 help Supports the DP83640 PHYTER with IEEE 1588 features.
Signature · 1 line
2.29.2
Re: [PATCH 2/7] phy: dp83640: select CONFIG_CRC32
Quoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Without crc32, this driver fails to link:
arm-linux-gnueabi-ld:
drivers/net/phy/dp83640.o: in function `match':
dp83640.c:(.text+0x476c): undefined reference to `crc32_le'Fixes 539e44d26855 ("dp83640: Include hash in timestamp/packet matching")Signed-off-by Arnd Bergmann <[email protected]>
Andrew
Re: [PATCH 2/7] phy: dp83640: select CONFIG_CRC32
In reply to Arnd BergmannQuoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Without crc32, this driver fails to link:
arm-linux-gnueabi-ld:
drivers/net/phy/dp83640.o: in function `match':
dp83640.c:(.text+0x476c): undefined reference to `crc32_le'Fixes 539e44d26855 ("dp83640: Include hash in timestamp/packet matching")Signed-off-by Arnd Bergmann <[email protected]>
PATCH 3/7 can: kvaser_pciefd: select CONFIG_CRC32
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Without crc32, this driver fails to link:
arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe':
kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be'
--- drivers/net/can/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/can/Kconfig +1 -0
@@ -123,6 +123,7 @@ config CAN_JANZ_ICAN3 config CAN_KVASER_PCIEFD depends on PCI tristate "Kvaser PCIe FD cards" + select CRC32 help This is a driver for the Kvaser PCI Express CAN FD family.
Signature · 1 line
2.29.2
Re: [PATCH 3/7] can: kvaser_pciefd: select CONFIG_CRC32
Quoted 9 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Without crc32, this driver fails to link:
arm-linux-gnueabi-ld:
drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe':
kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be'Fixes 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")Signed-off-by Arnd Bergmann <[email protected]>
regrards,
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
PATCH 4/7 wil6210: select CONFIG_CRC32
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Without crc32, the driver fails to link:
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow
--- drivers/net/wireless/ath/wil6210/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/ath/wil6210/Kconfig +1 -0
@@ -2,6 +2,7 @@ config WIL6210 tristate "Wilocity 60g WiFi card wil6210 support" select WANT_DEV_COREDUMP + select CRC32 depends on CFG80211 depends on PCI default n
Signature · 1 line
2.29.2
Re: [PATCH 4/7] wil6210: select CONFIG_CRC32
Quoted 10 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Without crc32, the driver fails to link:
arm-linux-gnueabi-ld:
drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' followFixes 151a9706503f ("wil6210: firmware download")Signed-off-by Arnd Bergmann <[email protected]>
I'll queue this to v5.11.
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Re: [PATCH 4/7] wil6210: select CONFIG_CRC32
In reply to Arnd BergmannQuoted 10 lines · Arnd Bergmann
From: Arnd Bergmann <[email protected]>
Without crc32, the driver fails to link:
arm-linux-gnueabi-ld:
drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' followFixes 151a9706503f ("wil6210: firmware download")Signed-off-by Arnd Bergmann <[email protected]>
Dave had already applied this so dropping from my queue.
Patch set to Not Applicable.
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
PATCH 5/7 cfg80211: select CONFIG_CRC32
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Without crc32 support, this fails to link:
arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz':
scan.c:(.text+0x928): undefined reference to `crc32_le'
--- net/wireless/Kconfig | 1 + 1 file changed, 1 insertion(+)
net/wireless/Kconfig +1 -0
@@ -21,6 +21,7 @@ config CFG80211 tristate "cfg80211 - wireless configuration API" depends on RFKILL || !RFKILL select FW_LOADER + select CRC32 # may need to update this when certificates are changed and are # using a different algorithm, though right now they shouldn't # (this is here rather than below to allow it to be a module)
Signature · 1 line
2.29.2
PATCH 6/7 misdn: dsp: select CONFIG_BITREVERSE
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Without this, we run into a link error
arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables':
(.text+0x30c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow
--- drivers/isdn/mISDN/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/isdn/mISDN/Kconfig +1 -0
@@ -13,6 +13,7 @@ if MISDN != n config MISDN_DSP tristate "Digital Audio Processing of transparent data" depends on MISDN + select BITREVERSE help Enable support for digital audio processing capability.
Signature · 1 line
2.29.2
PATCH 7/7 wan: ds26522: select CONFIG_BITREVERSE
In reply to Arnd BergmannFrom: Arnd Bergmann <[email protected]>
Without this, the driver runs into a link failure
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'
--- drivers/net/wan/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/wan/Kconfig +1 -0
@@ -282,6 +282,7 @@ config SLIC_DS26522 tristate "Slic Maxim ds26522 card support" depends on SPI depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST + select BITREVERSE help This module initializes and configures the slic maxim card in T1 or E1 mode.
Signature · 1 line
2.29.2