Skip to contentSkip to conversation

arm64: dts: n5x: Add support for Intel's eASIC N5X platform

PATCH New Dinh Nguyen 1 participant 1 message Jan 5, 2021

Subsystems (2)
Device tree bindings arm64
lore
Share & tools
lore

Dinh Nguyen

author
#0 lore raw

PATCH 1/1 arm64: dts: n5x: Add support for Intel's eASIC N5X platform

The Intel eASIC N5X platform shares the same register map as the Agilex platform, thus, we can re-use the socfpga_agilex.dtsi as the base DTSI.

Signed-off-by Dinh Nguyen <[email protected]>
---
 arch/arm64/Kconfig.platforms                  |  5 ++
 arch/arm64/boot/dts/intel/Makefile            |  1 +
 .../boot/dts/intel/socfpga_n5x_socdk.dts      | 53 +++++++++++++++++++
 3 files changed, 59 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
arch/arm64/Kconfig.platforms +5 -0
index 6eecdef538bd..c20eacd9a931 100644
@@ -13,6 +13,11 @@ config ARCH_AGILEX
 	help
 	  This enables support for Intel's Agilex SoCFPGA Family.
 
+config ARCH_N5X
+	bool "Intel's eASIC N5X SoCFPGA Family"
+	help
+	  This enables support for Intel's eASIC N5X SoCFPGA Family.
+
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
arch/arm64/boot/dts/intel/Makefile +1 -0
index 296eceec4276..3a052540605b 100644
@@ -2,3 +2,4 @@
 dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
 			     socfpga_agilex_socdk_nand.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
+dtb-$(CONFIG_ARCH_N5X) += socfpga_n5x_socdk.dtb
arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts new file +53 -0

53 lines not on this page · raw message

Signature · 1 line
2.30.0