Skip to contentSkip to conversation

tools/sunxi: Use mkimage for SPL generation

PATCH New Andre Przywara 4 participants 9 messages Jan 6, 2021 – Jan 7, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v4 cover tools/sunxi: Use mkimage for SPL generation

Hi,

a small update fixing the strncpy bug and addressing too long DT names properly. Thanks to Samuel for pointing this out.
==================

So far creating a bootable SPL image for Allwinner based boards uses the mksunxiboot tool. Most other platforms seemed to have integrated this kind of functionality into the common mkimage tool.

Since there is nothing special about the Allwinner image in this respect, just add support for the so-called "eGON" image type into mkimage. If there was a particular reason this hasn't been done before, please let me know.

This will eventually allow us to remove mksunxiboot, but I leave it around for now in case of regressions and since some people depend on it from external projects.

Patch 1/3 splits some existing sunxi specific header file, so we can share the eGON header definition between the tools and the SPL. Patch 2/3 adds the actual support to mkimage, patch 3/3 then switches the Makefile to use mkimage instead of mksunxiboot.

I tested all 152 Allwinner boards by building each u-boot-sunxi-with-spl.bin and comparing them against the version created using mksunxiboot (using SOURCE_DATE_EPOCH and .scmversion to create reproducible builds, and by reverting just patch 3/3).
All files before and after were identical.

Cheers,
Andre

Changelog v3 .. v4:
- properly check DT name length before inserting into header

Changelog v2 .. v3:
- factor out eGON struct into separate header file
- only print extended header information when applicable
- remove redundant alignment
- minor cosmetic fixes

Changelog v1 .. v2:
- Drop already merged cleanup patch (v1 1/3)
- replace relative include path
- remove already defined ALIGN macro
- rebase against current master

Andre Przywara (3):
sunxi: Factor out eGON BROM header description
tools: mkimage: Add Allwinner eGON support
sunxi: Use mkimage for SPL boot image generation

 arch/arm/include/asm/arch-sunxi/spl.h |  65 +-----------
 common/image.c                        |   1 +
 include/image.h                       |   1 +
 include/sunxi_image.h                 |  82 ++++++++++++++++
 scripts/Makefile.spl                  |   8 +-
 tools/Makefile                        |   1 +
 tools/sunxi_egon.c                    | 136 ++++++++++++++++++++++++++
 7 files changed, 226 insertions(+), 68 deletions(-)
 create mode 100644 include/sunxi_image.h
 create mode 100644 tools/sunxi_egon.c
Signature · 1 line
2.17.5
#1 lore raw

PATCH v4 1/3 sunxi: Factor out eGON BROM header description

To be able to easily share the Allwinner eGON BROM header structure between the tools and the SPL code, move the struct definition into a separate header file.

---
 arch/arm/include/asm/arch-sunxi/spl.h | 65 +--------------------
 include/sunxi_image.h                 | 81 +++++++++++++++++++++++++++
 2 files changed, 82 insertions(+), 64 deletions(-)
 create mode 100644 include/sunxi_image.h
arch/arm/include/asm/arch-sunxi/spl.h +1 -64
index 8c916e8c752..7b99c1aa12d 100644
@@ -7,19 +7,7 @@
 #ifndef	_ASM_ARCH_SPL_H_
 #define	_ASM_ARCH_SPL_H_
 
-#define BOOT0_MAGIC		"eGON.BT0"
-#define SPL_SIGNATURE		"SPL" /* marks "sunxi" SPL header */
-#define SPL_MAJOR_BITS		3
-#define SPL_MINOR_BITS		5
-#define SPL_VERSION(maj, min)						\
-	((((maj) & ((1U << SPL_MAJOR_BITS) - 1)) << SPL_MINOR_BITS) | \
-	((min) & ((1U << SPL_MINOR_BITS) - 1)))
-
-#define SPL_HEADER_VERSION	SPL_VERSION(0, 2)
-
-#define SPL_ENV_HEADER_VERSION	SPL_VERSION(0, 1)
-#define SPL_DT_HEADER_VERSION	SPL_VERSION(0, 2)
-#define SPL_DRAM_HEADER_VERSION	SPL_VERSION(0, 3)
+#include <sunxi_image.h>
 
 #define SPL_ADDR		CONFIG_SUNXI_SRAM_ADDRESS
 
@@ -31,57 +19,6 @@
 #define SUNXI_BOOTED_FROM_MMC0_HIGH	0x10
 #define SUNXI_BOOTED_FROM_MMC2_HIGH	0x12
 
-/* boot head definition from sun4i boot code */
-struct boot_file_head {
-	uint32_t b_instruction;	/* one intruction jumping to real code */
-	uint8_t magic[8];	/* ="eGON.BT0" or "eGON.BT1", not C-style str */
-	uint32_t check_sum;	/* generated by PC */
-	uint32_t length;	/* generated by PC */
-	/*
-	 * We use a simplified header, only filling in what is needed
-	 * by the boot ROM. To be compatible with Allwinner tools we
-	 * would need to implement the proper fields here instead of
-	 * padding.
-	 *
-	 * Actually we want the ability to recognize our "sunxi" variant
-	 * of the SPL. To do so, let's place a special signature into the
-	 * "pub_head_size" field. We can reasonably expect Allwinner's
-	 * boot0 to always have the upper 16 bits of this set to 0 (after
-	 * all the value shouldn't be larger than the limit imposed by
-	 * SRAM size).
-	 * If the signature is present (at 0x14), then we know it's safe
-	 * to use the remaining 8 bytes (at 0x18) for our own purposes.
-	 * (E.g. sunxi-tools "fel" utility can pass information there.)
-	 */
-	union {
-		uint32_t pub_head_size;
-		uint8_t spl_signature[4];
-	};
-	uint32_t fel_script_address;	/* since v0.1, set by sunxi-fel */
-	/*
-	 * If the fel_uEnv_length member below is set to a non-zero value,
-	 * it specifies the size (byte count) of data at fel_script_address.
-	 * At the same time this indicates that the data is in uEnv.txt
-	 * compatible format, ready to be imported via "env import -t".
-	 */
-	uint32_t fel_uEnv_length;	/* since v0.1, set by sunxi-fel */
-	/*
-	 * Offset of an ASCIIZ string (relative to the SPL header), which
-	 * contains the default device tree name (CONFIG_DEFAULT_DEVICE_TREE).
-	 * This is optional and may be set to NULL. Is intended to be used
-	 * by flash programming tools for providing nice informative messages
-	 * to the users.
-	 */
-	uint32_t dt_name_offset;	/* since v0.2, set by mksunxiboot */
-	uint32_t dram_size;		/* in MiB, since v0.3, set by SPL */
-	uint32_t boot_media;		/* written here by the boot ROM */
-	/* A padding area (may be used for storing text strings) */
-	uint32_t string_pool[13];	/* since v0.2, filled by mksunxiboot */
-	/* The header must be a multiple of 32 bytes (for VBAR alignment) */
-};
-
-/* Compile time check to assure proper alignment of structure */
-typedef char boot_file_head_not_multiple_of_32[1 - 2*(sizeof(struct boot_file_head) % 32)];
 
 #define is_boot0_magic(addr)	(memcmp((void *)addr, BOOT0_MAGIC, 8) == 0)
 
include/sunxi_image.h new file +81 -0

81 lines not on this page · raw message

Signature · 1 line
2.17.5
#2 lore raw

PATCH v4 2/3 tools: mkimage: Add Allwinner eGON support

In reply to Andre Przywara

So far we used the separate mksunxiboot tool for generating a bootable image for Allwinner SPLs, probably just for historical reasons.

Use the mkimage framework to generate a so called eGON image the Allwinner BROM expects.
The new image type is called "sunxi_egon", to differentiate it from the (still to be implemented) secure boot TOC0 image.

---
 common/image.c        |   1 +
 include/image.h       |   1 +
 include/sunxi_image.h |   1 +
 tools/Makefile        |   1 +
 tools/sunxi_egon.c    | 136 ++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 140 insertions(+)
 create mode 100644 tools/sunxi_egon.c
common/image.c +1 -0
index 451fc689a89..6923dac7c07 100644
@@ -189,6 +189,7 @@ static const table_entry_t uimage_type[] = {
 	{	IH_TYPE_STM32IMAGE, "stm32image", "STMicroelectronics STM32 Image" },
 	{	IH_TYPE_MTKIMAGE,   "mtk_image",   "MediaTek BootROM loadable Image" },
 	{	IH_TYPE_COPRO, "copro", "Coprocessor Image"},
+	{	IH_TYPE_SUNXI_EGON, "sunxi_egon",  "Allwinner eGON Boot Image" },
 	{	-1,		    "",		  "",			},
 };
 
include/image.h +1 -0
index 00bc03bebec..89bfca2155a 100644
@@ -308,6 +308,7 @@ enum {
 	IH_TYPE_IMX8MIMAGE,		/* Freescale IMX8MBoot Image	*/
 	IH_TYPE_IMX8IMAGE,		/* Freescale IMX8Boot Image	*/
 	IH_TYPE_COPRO,			/* Coprocessor Image for remoteproc*/
+	IH_TYPE_SUNXI_EGON,		/* Allwinner eGON Boot Image */
 
 	IH_TYPE_COUNT,			/* Number of image types */
 };
include/sunxi_image.h +1 -0
index d0d1290eb72..5b2055c0af3 100644
@@ -13,6 +13,7 @@
 #define	SUNXI_IMAGE_H
 
 #define BOOT0_MAGIC		"eGON.BT0"
+#define BROM_STAMP_VALUE	0x5f0a6c39
 #define SPL_SIGNATURE		"SPL" /* marks "sunxi" SPL header */
 #define SPL_MAJOR_BITS		3
 #define SPL_MINOR_BITS		5
tools/Makefile +1 -0
index 14fb0ed98f6..9b1aa51b10a 100644
@@ -104,6 +104,7 @@ dumpimage-mkimage-objs := aisimage.o \
 			stm32image.o \
 			$(ROCKCHIP_OBS) \
 			socfpgaimage.o \
+			sunxi_egon.o \
 			lib/crc16.o \
 			lib/sha1.o \
 			lib/sha256.o \
tools/sunxi_egon.c new file +136 -0

136 lines not on this page · raw message

Signature · 1 line
2.17.5
#3 lore raw

PATCH v4 2/3 tools: mkimage: Add Allwinner eGON support

Quoted 10 lines · Andre Przywara

So far we used the separate mksunxiboot tool for generating a bootable image for Allwinner SPLs, probably just for historical reasons.

Use the mkimage framework to generate a so called eGON image the Allwinner BROM expects.
The new image type is called "sunxi_egon", to differentiate it from the (still to be implemented) secure boot TOC0 image.

Quoted 9 lines
---
 common/image.c        |   1 +
 include/image.h       |   1 +
 include/sunxi_image.h |   1 +
 tools/Makefile        |   1 +
 tools/sunxi_egon.c    | 136 ++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 140 insertions(+)
 create mode 100644 tools/sunxi_egon.c
#4 lore raw

PATCH v4 3/3 sunxi: Use mkimage for SPL boot image generation

In reply to Andre Przywara

Switch the SPL boot image generation from using mksunxiboot to the new sunxi_egon format of mkimage.

Verified to create identical results for all 152 Allwinner boards.

---
 scripts/Makefile.spl | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
scripts/Makefile.spl +4 -4
index 9f1f7445d71..db95bd998a8 100644
@@ -382,11 +382,11 @@ endif
 $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
 	$(call if_changed,mkimage)
 
-quiet_cmd_mksunxiboot = MKSUNXI $@
-cmd_mksunxiboot = $(objtree)/tools/mksunxiboot \
-			--default-dt $(CONFIG_DEFAULT_DEVICE_TREE) $< $@
+MKIMAGEFLAGS_sunxi-spl.bin = -T sunxi_egon \
+	-n $(CONFIG_DEFAULT_DEVICE_TREE)
+
 $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
-	$(call if_changed,mksunxiboot)
+	$(call if_changed,mkimage)
 
 quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
 cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
Signature · 1 line
2.17.5
#5 lore raw

PATCH v4 3/3 sunxi: Use mkimage for SPL boot image generation

Quoted 10 lines · Andre Przywara

Switch the SPL boot image generation from using mksunxiboot to the new sunxi_egon format of mkimage.

Verified to create identical results for all 152 Allwinner boards.

---
 scripts/Makefile.spl | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Do we need to delete the old tool?

#6 lore raw

PATCH v4 3/3 sunxi: Use mkimage for SPL boot image generation

On 07/01/2021 12:36, Simon Glass wrote:

Hi Simon,

thanks for the review!

Quoted 7 lines · Andre Przywara
Quoted 6 lines

Switch the SPL boot image generation from using mksunxiboot to the new sunxi_egon format of mkimage.

Verified to create identical results for all 152 Allwinner boards.

Quoted 8 lines
Quoted 4 lines
---
 scripts/Makefile.spl | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Do we need to delete the old tool?

I would rather not quite do this yet, instead leave it around for a bit. There is for instance sunxi-tools, that relies on this, and it's also packaged as part of Debian's u-boot-tools package.
We surely will transition them over, but this might take a while.

Cheers,
Andre

maintainer
#7 lore raw

v4 cover tools/sunxi: Use mkimage for SPL generation

In reply to Andre Przywara

Dne sreda, 06. januar 2021 ob 10:24:35 CET je Andre Przywara napisal(a):

Quoted 23 lines

Hi,

a small update fixing the strncpy bug and addressing too long DT names properly. Thanks to Samuel for pointing this out.
==================

So far creating a bootable SPL image for Allwinner based boards uses the mksunxiboot tool. Most other platforms seemed to have integrated this kind of functionality into the common mkimage tool.

Since there is nothing special about the Allwinner image in this respect, just add support for the so-called "eGON" image type into mkimage. If there was a particular reason this hasn't been done before, please let me know.

This will eventually allow us to remove mksunxiboot, but I leave it around for now in case of regressions and since some people depend on it from external projects.

Patch 1/3 splits some existing sunxi specific header file, so we can share the eGON header definition between the tools and the SPL. Patch 2/3 adds the actual support to mkimage, patch 3/3 then switches the Makefile to use mkimage instead of mksunxiboot.

Quoted 8 lines

I tested all 152 Allwinner boards by building each u-boot-sunxi-with-spl.bin and comparing them against the version created using mksunxiboot (using SOURCE_DATE_EPOCH and .scmversion to create reproducible builds, and by reverting just patch 3/3).
All files before and after were identical.

Cheers,
Andre

Whole series is:

Best regards,
Jernej

Quoted 21 lines

Changelog v3 .. v4:
- properly check DT name length before inserting into header

Changelog v2 .. v3:
- factor out eGON struct into separate header file
- only print extended header information when applicable
- remove redundant alignment
- minor cosmetic fixes

Changelog v1 .. v2:
- Drop already merged cleanup patch (v1 1/3)
- replace relative include path
- remove already defined ALIGN macro
- rebase against current master

Andre Przywara (3):
sunxi: Factor out eGON BROM header description
tools: mkimage: Add Allwinner eGON support
sunxi: Use mkimage for SPL boot image generation

Quoted 16 lines
 arch/arm/include/asm/arch-sunxi/spl.h |  65 +-----------
 common/image.c                        |   1 +
 include/image.h                       |   1 +
 include/sunxi_image.h                 |  82 ++++++++++++++++
 scripts/Makefile.spl                  |   8 +-
 tools/Makefile                        |   1 +
 tools/sunxi_egon.c                    | 136 ++++++++++++++++++++++++++
 7 files changed, 226 insertions(+), 68 deletions(-)
 create mode 100644 include/sunxi_image.h
 create mode 100644 tools/sunxi_egon.c
Signature · 4 lines
2.17.5

-- 
You received this message because you are subscribed to the Google Groups 

"linux-sunxi" group.

Quoted 1 line

To unsubscribe from this group and stop receiving emails from it, send an

email to linux-sunxi+unsubscribe at googlegroups.com.

Quoted 1 line

To view this discussion on the web, visit https://groups.google.com/d/msgid/

linux-sunxi/20210106092438.3438-1-andre.przywara%40arm.com.

Quoted 1 line
maintainer
#8 lore raw

v4 cover tools/sunxi: Use mkimage for SPL generation

In reply to Andre Przywara
Quoted 52 lines · Andre Przywara

Hi,

a small update fixing the strncpy bug and addressing too long DT names properly. Thanks to Samuel for pointing this out.
==================

So far creating a bootable SPL image for Allwinner based boards uses the mksunxiboot tool. Most other platforms seemed to have integrated this kind of functionality into the common mkimage tool.

Since there is nothing special about the Allwinner image in this respect, just add support for the so-called "eGON" image type into mkimage. If there was a particular reason this hasn't been done before, please let me know.

This will eventually allow us to remove mksunxiboot, but I leave it around for now in case of regressions and since some people depend on it from external projects.

Patch 1/3 splits some existing sunxi specific header file, so we can share the eGON header definition between the tools and the SPL. Patch 2/3 adds the actual support to mkimage, patch 3/3 then switches the Makefile to use mkimage instead of mksunxiboot.

I tested all 152 Allwinner boards by building each u-boot-sunxi-with-spl.bin and comparing them against the version created using mksunxiboot (using SOURCE_DATE_EPOCH and .scmversion to create reproducible builds, and by reverting just patch 3/3).
All files before and after were identical.

Cheers,
Andre

Changelog v3 .. v4:
- properly check DT name length before inserting into header

Changelog v2 .. v3:
- factor out eGON struct into separate header file
- only print extended header information when applicable
- remove redundant alignment
- minor cosmetic fixes

Changelog v1 .. v2:
- Drop already merged cleanup patch (v1 1/3)
- replace relative include path
- remove already defined ALIGN macro
- rebase against current master

Andre Przywara (3):
sunxi: Factor out eGON BROM header description
tools: mkimage: Add Allwinner eGON support
sunxi: Use mkimage for SPL boot image generation

Quoted 10 lines
 arch/arm/include/asm/arch-sunxi/spl.h |  65 +-----------
 common/image.c                        |   1 +
 include/image.h                       |   1 +
 include/sunxi_image.h                 |  82 ++++++++++++++++
 scripts/Makefile.spl                  |   8 +-
 tools/Makefile                        |   1 +
 tools/sunxi_egon.c                    | 136 ++++++++++++++++++++++++++
 7 files changed, 226 insertions(+), 68 deletions(-)
 create mode 100644 include/sunxi_image.h
 create mode 100644 tools/sunxi_egon.c

For the series: