selftests: gpio: rework and port to GPIO uAPI v2
Subsystems (4)
Kent Gibson
reviewerv2 cover selftests: gpio: rework and port to GPIO uAPI v2
Initially I just wanted to port the selftests to the latest GPIO uAPI, but on finding that, due to dependency issues, the selftests are not built for the buildroot environments that I do most of my GPIO testing in, I decided to take a closer look.
The first patch is essentially a rewrite of the exising test suite. It uses a simplified abstraction of the uAPI interfaces to allow a common test suite to test the gpio-mockup using either of the uAPI interfaces. The simplified cdev interface is implemented in gpio-mockup.sh, with the actual driving of the uAPI implemented in gpio-mockup-cdev.c. The simplified sysfs interface replaces gpio-mockup-sysfs.sh and is loaded over the cdev implementation when selected.
The new tests should also be simpler to extend to cover new mockup interfaces, such as the one Bart has been working on.
I have dropped support for testing modules other than gpio-mockup from the command line options, as the tests are very gpio-mockup specific so I didn't see any calling for it.
I have also tried to emphasise in the test output that the tests are covering the gpio-mockup itself. They do perform some implicit testing of gpiolib and the uAPI interfaces, and so can be useful as smoke tests for those, but their primary focus is the gpio-mockup.
Patches 2 through 5 do some cleaning up that is now possible with the new implementation, including enabling building in buildroot environments. Patch 4 doesn't strictly clean up all the old gpio references that it could - the gpio was the only Level 1 test, so the Level 1 tests could potentially be removed, but I was unsure if there may be other implications to removing a whole test level, or that it may be useful as a placeholder in case other static LDLIBS tests are added in the future??
Patch 6 finally gets around to porting the tests to the latest GPIO uAPI.
And Patch 7 updates the config to set the CONFIG_GPIO_CDEV option that was added in v5.10.
Cheers,
Kent.
Changes v1 -> v2 (all in patch 1 and gpio-mockup.sh unless stated
otherwise):
- reorder includes in gpio-mockup-cdev.c
- a multitude of improvements to gpio-mockup.sh and gpio-mockup-sysfs.sh based on Andy's review comments
- improved cleanup to ensure all child processes are killed on exit
- added race condition prevention or mitigation including the wait in release_line, the retries in assert_mock, the assert_mock in set_mock, and the sleep in set_line
Kent Gibson (7):
selftests: gpio: rework and simplify test implementation
selftests: gpio: remove obsolete gpio-mockup-chardev.c
selftests: remove obsolete build restriction for gpio
selftests: remove obsolete gpio references from kselftest_deps.sh
tools: gpio: remove uAPI v1 code no longer used by selftests
selftests: gpio: port to GPIO uAPI v2
selftests: gpio: add CONFIG_GPIO_CDEV to config
tools/gpio/gpio-utils.c | 89 ---- tools/gpio/gpio-utils.h | 6 - tools/testing/selftests/Makefile | 9 - tools/testing/selftests/gpio/Makefile | 26 +- tools/testing/selftests/gpio/config | 1 + .../testing/selftests/gpio/gpio-mockup-cdev.c | 198 +++++++ .../selftests/gpio/gpio-mockup-chardev.c | 323 ------------ .../selftests/gpio/gpio-mockup-sysfs.sh | 168 ++---- tools/testing/selftests/gpio/gpio-mockup.sh | 497 ++++++++++++------ tools/testing/selftests/kselftest_deps.sh | 4 +- 10 files changed, 603 insertions(+), 718 deletions(-) create mode 100644 tools/testing/selftests/gpio/gpio-mockup-cdev.c delete mode 100644 tools/testing/selftests/gpio/gpio-mockup-chardev.c
Signature · 1 line
2.30.0
Kent Gibson
reviewerPATCH v2 1/7 selftests: gpio: rework and simplify test implementation
The GPIO mockup selftests are overly complicated with separate implementations of the tests for sysfs and cdev uAPI, and with the cdev implementation being dependent on tools/gpio and libmount.
Rework the test implementation to provide a common test suite with a simplified pluggable uAPI interface. The cdev implementation utilises the GPIO uAPI directly to remove the dependence on tools/gpio. The simplified uAPI interface removes the need for any file system mount checks in C, and so removes the dependence on libmount.
The rework also fixes the sysfs test implementation which has been broken since the device created in the multiple gpiochip case was split into separate devices.
--- tools/testing/selftests/gpio/Makefile | 26 +- .../testing/selftests/gpio/gpio-mockup-cdev.c | 139 +++++ .../selftests/gpio/gpio-mockup-sysfs.sh | 168 ++---- tools/testing/selftests/gpio/gpio-mockup.sh | 490 ++++++++++++------ 4 files changed, 535 insertions(+), 288 deletions(-) create mode 100644 tools/testing/selftests/gpio/gpio-mockup-cdev.c
tools/testing/selftests/gpio/Makefile +1 -25
@@ -1,32 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -VAR_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null) -VAR_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null) -ifeq ($(VAR_LDLIBS),) -VAR_LDLIBS := -lmount -I/usr/include/libmount -endif - -CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(VAR_CFLAGS) -LDLIBS += $(VAR_LDLIBS) - TEST_PROGS := gpio-mockup.sh TEST_FILES := gpio-mockup-sysfs.sh -TEST_PROGS_EXTENDED := gpio-mockup-chardev - -GPIODIR := $(realpath ../../../gpio) -GPIOOBJ := gpio-utils.o +TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev -all: $(TEST_PROGS_EXTENDED) - -override define CLEAN - $(RM) $(TEST_PROGS_EXTENDED) - $(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean -endef - -KSFT_KHDR_INSTALL := 1 include ../lib.mk -$(TEST_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ) - -$(GPIODIR)/$(GPIOOBJ): - $(MAKE) OUTPUT=$(GPIODIR)/ -C $(GPIODIR)
tools/testing/selftests/gpio/gpio-mockup-cdev.c new file +139 -0
139 lines not on this page · raw message
tools/testing/selftests/gpio/gpio-mockup-sysfs.sh +55 -113
190 lines not on this page · raw message
tools/testing/selftests/gpio/gpio-mockup.sh +340 -150
545 lines not on this page · raw message
Signature · 1 line
2.30.0
Re: [PATCH v2 1/7] selftests: gpio: rework and simplify test implementation
Quoted 11 lines · Kent Gibson
The GPIO mockup selftests are overly complicated with separate implementations of the tests for sysfs and cdev uAPI, and with the cdev implementation being dependent on
tools/gpioand libmount.Rework the test implementation to provide a common test suite with a simplified pluggable uAPI interface. The cdev implementation utilises the GPIO uAPI directly to remove the dependence on
tools/gpio. The simplified uAPI interface removes the need for any file system mount checks in C, and so removes the dependence on libmount.
Quoted 7 lines
The rework also fixes the sysfs test implementation which has been broken since the device created in the multiple gpiochip case was split into separate devices.
Fixes commit 8a39f597bcfd ("gpio: mockup: rework device probing")Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>
The C part looks good to me. For the shell part I would probably do a couple things differently but since we don't really have a coding style for shell scripts in the kernel, I don't want to block these patches, so:
Kent Gibson
reviewerRe: [PATCH v2 1/7] selftests: gpio: rework and simplify test implementation
In reply to Kent GibsonQuoted 10 lines · Kent Gibson
The GPIO mockup selftests are overly complicated with separate implementations of the tests for sysfs and cdev uAPI, and with the cdev implementation being dependent on
tools/gpioand libmount.Rework the test implementation to provide a common test suite with a simplified pluggable uAPI interface. The cdev implementation utilises the GPIO uAPI directly to remove the dependence on
tools/gpio. The simplified uAPI interface removes the need for any file system mount checks in C, and so removes the dependence on libmount.
Quoted 8 lines
The rework also fixes the sysfs test implementation which has been broken since the device created in the multiple gpiochip case was split into separate devices.
Fixes commit 8a39f597bcfd ("gpio: mockup: rework device probing")Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>---
Just a note that the 'commit' should be removed from the Fixes tag.
That will be fixed in v3.
The patches have been reviewed from the gpio side - any feedback from the selftest side?
Cheers,
Kent.
Kent Gibson
reviewerPATCH v2 2/7 selftests: gpio: remove obsolete gpio-mockup-chardev.c
In reply to Kent GibsonGPIO selftests have changed to new gpio-mockup-cdev helper, so remove old gpio-mockup-chardev helper.
--- .../selftests/gpio/gpio-mockup-chardev.c | 323 ------------------ 1 file changed, 323 deletions(-) delete mode 100644 tools/testing/selftests/gpio/gpio-mockup-chardev.c
tools/testing/selftests/gpio/gpio-mockup-chardev.c deleted +0 -323
@@ -1,323 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* -* GPIO chardev test helper -* -* Copyright (C) 2016 Bamvor Jian Zhang -*/ - -#define _GNU_SOURCE -#include <unistd.h> -#include <stdio.h> -#include <stdlib.h> -#include <errno.h> -#include <string.h> -#include <fcntl.h> -#include <getopt.h> -#include <sys/ioctl.h> -#include <libmount.h> -#include <err.h> -#include <dirent.h> -#include <linux/gpio.h> -#include "../../../gpio/gpio-utils.h" - -#define CONSUMER "gpio-selftest" -#define GC_NUM 10 -enum direction { -OUT , -IN -}; - -static int get_debugfs (char **path) -{ -struct libmnt_context *cxt; -struct libmnt_table *tb; -struct libmnt_iter *itr =NULL ; -struct libmnt_fs *fs; -int found =0 , ret; - - cxt =mnt_new_context (); -if (!cxt) -err (EXIT_FAILURE ,"libmount context allocation failed" ); - - itr =mnt_new_iter (MNT_ITER_FORWARD ); -if (!itr) -err (EXIT_FAILURE ,"failed to initialize libmount iterator" ); - -if (mnt_context_get_mtab (cxt, &tb)) -err (EXIT_FAILURE ,"failed to read mtab" ); - -while (mnt_table_next_fs (tb, itr, &fs) ==0 ) { -const char *type =mnt_fs_get_fstype (fs); - -if (!strcmp (type,"debugfs" )) { - found =1 ; -break ; - } - } -if (found) { - ret =asprintf (path,"%s/gpio" ,mnt_fs_get_target (fs)); -if (ret <0 ) -err (EXIT_FAILURE ,"failed to format string" ); - } - -mnt_free_iter (itr); -mnt_free_context (cxt); - -if (!found) -return -1 ; - -return 0 ; -} - -static int gpio_debugfs_get (const char *consumer,int *dir,int *value) -{ -char *debugfs; -FILE *f; -char *line =NULL ; -size_t len =0 ; -char *cur; -int found =0 ; - -if (get_debugfs (&debugfs) !=0 ) -err (EXIT_FAILURE ,"debugfs is not mounted" ); - - f =fopen (debugfs,"r" ); -if (!f) -err (EXIT_FAILURE ,"read from gpio debugfs failed" ); - -/* -* gpio-2 ( |gpio-selftest ) in lo -*/ -while (getline (&line, &len, f) !=-1 ) { - cur =strstr (line, consumer); -if (cur ==NULL ) -continue ; - - cur =strchr (line,')' ); -if (!cur) -continue ; - - cur +=2 ; -if (!strncmp (cur,"out" ,3 )) { - *dir =OUT ; - cur +=4 ; - }else if (!strncmp (cur,"in" ,2 )) { - *dir =IN ; - cur +=4 ; - } - -if (!strncmp (cur,"hi" ,2 )) - *value =1 ; -else if (!strncmp (cur,"lo" ,2 )) - *value =0 ; - - found =1 ; -break ; - } -free (debugfs); -fclose (f); -free (line); - -if (!found) -return -1 ; - -return 0 ; -} - -static struct gpiochip_info *list_gpiochip (const char *gpiochip_name,int *ret) -{ -struct gpiochip_info *cinfo; -struct gpiochip_info *current; -const struct dirent *ent; -DIR *dp; -char *chrdev_name; -int fd; -int i =0 ; - - cinfo =calloc (sizeof (struct gpiochip_info ) *4 ,GC_NUM +1 ); -if (!cinfo) -err (EXIT_FAILURE ,"gpiochip_info allocation failed" ); - - current = cinfo; - dp =opendir ("/dev" ); -if (!dp) { - *ret = -errno; - goto error_out; - }else { - *ret =0 ; - } - -while (ent =readdir (dp), ent) { -if (check_prefix (ent->d_name,"gpiochip" )) { - *ret =asprintf (&chrdev_name,"/dev/%s" , ent->d_name); -if (*ret <0 ) - goto error_out; - - fd =open (chrdev_name,0 ); -if (fd ==-1 ) { - *ret = -errno; -fprintf (stderr,"Failed to open %s\n" , - chrdev_name); - goto error_close_dir; - } - *ret =ioctl (fd,GPIO_GET_CHIPINFO_IOCTL , current); -if (*ret ==-1 ) { -perror ("Failed to issue CHIPINFO IOCTL\n" ); - goto error_close_dir; - } -close (fd); -if (strcmp (current->label, gpiochip_name) ==0 - ||check_prefix (current->label, gpiochip_name)) { - *ret =0 ; - current++; - i++; - } - } - } - -if ((!*ret && i ==0 ) || *ret <0 ) { -free (cinfo); - cinfo =NULL ; - } -if (!*ret && i >0 ) { - cinfo =realloc (cinfo,sizeof (struct gpiochip_info ) *4 * i); - *ret = i; - } - -error_close_dir: -closedir (dp); -error_out: -if (*ret <0 ) -err (EXIT_FAILURE ,"list gpiochip failed: %s" ,strerror (*ret)); - -return cinfo; -} - -int gpio_pin_test (struct gpiochip_info *cinfo,int line,int flag,int value) -{ -struct gpiohandle_data data; -unsigned int lines[] = {line}; -int fd; -int debugfs_dir =IN ; -int debugfs_value =0 ; -int ret; - - data.values[0 ] = value; - ret =gpiotools_request_linehandle (cinfo->name, lines,1 , flag, &data, -CONSUMER ); -if (ret <0 ) - goto fail_out; -else - fd = ret; - - ret =gpio_debugfs_get (CONSUMER , &debugfs_dir, &debugfs_value); -if (ret) { - ret = -EINVAL ; - goto fail_out; - } -if (flag &GPIOHANDLE_REQUEST_INPUT ) { -if (debugfs_dir !=IN ) { - errno = -EINVAL ; - ret = -errno; - } - }else if (flag &GPIOHANDLE_REQUEST_OUTPUT ) { -if (flag &GPIOHANDLE_REQUEST_ACTIVE_LOW ) - debugfs_value = !debugfs_value; - -if (!(debugfs_dir ==OUT && value == debugfs_value)) { - errno = -EINVAL ; - ret = -errno; - } - } -gpiotools_release_linehandle (fd); - -fail_out: -if (ret) -err (EXIT_FAILURE ,"gpio<%s> line<%d> test flag<0x%x> value<%d>" , - cinfo->name, line, flag, value); - -return ret; -} - -void gpio_pin_tests (struct gpiochip_info *cinfo,unsigned int line) -{ -printf ("line<%d>" , line); -gpio_pin_test (cinfo, line,GPIOHANDLE_REQUEST_OUTPUT ,0 ); -printf ("." ); -gpio_pin_test (cinfo, line,GPIOHANDLE_REQUEST_OUTPUT ,1 ); -printf ("." ); -gpio_pin_test (cinfo, line, -GPIOHANDLE_REQUEST_OUTPUT |GPIOHANDLE_REQUEST_ACTIVE_LOW , -0 ); -printf ("." ); -gpio_pin_test (cinfo, line, -GPIOHANDLE_REQUEST_OUTPUT |GPIOHANDLE_REQUEST_ACTIVE_LOW , -1 ); -printf ("." ); -gpio_pin_test (cinfo, line,GPIOHANDLE_REQUEST_INPUT ,0 ); -printf ("." ); -} - -/* -* ./gpio-mockup-chardev gpio_chip_name_prefix is_valid_gpio_chip -* Return 0 if successful or exit with EXIT_FAILURE if test failed. -* gpio_chip_name_prefix: The prefix of gpiochip you want to test. E.g. -* gpio-mockup -* is_valid_gpio_chip: Whether the gpio_chip is valid. 1 means valid, -* 0 means invalid which could not be found by -* list_gpiochip. -*/ -int main (int argc,char *argv[]) -{ -char *prefix; -int valid; -struct gpiochip_info *cinfo; -struct gpiochip_info *current; -int i; -int ret; - -if (argc <3 ) { -printf ("Usage: %s prefix is_valid" , argv[0 ]); -exit (EXIT_FAILURE ); - } - - prefix = argv[1 ]; - valid =strcmp (argv[2 ],"true" ) ==0 ?1 :0 ; - -printf ("Test gpiochip %s: " , prefix); - cinfo =list_gpiochip (prefix, &ret); -if (!cinfo) { -if (!valid && ret ==0 ) { -printf ("Invalid test successful\n" ); - ret =0 ; - goto out; - }else { - ret = -EINVAL ; - goto out; - } - }else if (cinfo && !valid) { - ret = -EINVAL ; - goto out; - } - current = cinfo; -for (i =0 ; i < ret; i++) { -gpio_pin_tests (current,0 ); -gpio_pin_tests (current, current->lines -1 ); -gpio_pin_tests (current,random () % current->lines); - current++; - } - ret =0 ; -printf ("successful\n" ); - -out: -if (ret) -fprintf (stderr,"gpio<%s> test failed\n" , prefix); - -if (cinfo) -free (cinfo); - -if (ret) -exit (EXIT_FAILURE ); - -return ret; -}
Signature · 1 line
2.30.0
Re: [PATCH v2 2/7] selftests: gpio: remove obsolete gpio-mockup-chardev.c
Quoted 7 lines · Kent Gibson
GPIO selftests have changed to new gpio-mockup-cdev helper, so remove old gpio-mockup-chardev helper.
Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>---
Kent Gibson
reviewerPATCH v2 3/7 selftests: remove obsolete build restriction for gpio
In reply to Kent GibsonBuild restrictions related to the gpio-mockup-chardev helper are no longer relevant so remove them.
--- tools/testing/selftests/Makefile | 9 --------- 1 file changed, 9 deletions(-)
tools/testing/selftests/Makefile +0 -9
@@ -121,15 +121,6 @@ ARCH ?= $(SUBARCH) export KSFT_KHDR_INSTALL_DONE := 1 export BUILD -# build and run gpio when output directory is the src dir. -# gpio has dependency on tools/gpio and builds tools/gpio -# objects in the src directory in all cases making the src -# repo dirty even when objects are relocated. -ifneq (1,$(DEFAULT_INSTALL_HDR_PATH)) - TMP := $(filter-out gpio, $(TARGETS)) - TARGETS := $(TMP) -endif - # set default goal to all, so make without a target runs all, even when # all isn't the first target in the file. .DEFAULT_GOAL := all
Signature · 1 line
2.30.0
Re: [PATCH v2 3/7] selftests: remove obsolete build restriction for gpio
Quoted 31 lines · Kent Gibson
Build restrictions related to the gpio-mockup-chardev helper are no longer relevant so remove them.
Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>--- tools/testing/selftests/Makefile | 9 --------- 1 file changed, 9 deletions(-)tools/testing/selftests/Makefile +0
-10@@ -121,15 +121,6 @@ ARCH ?= $(SUBARCH) export KSFT_KHDR_INSTALL_DONE := 1 export BUILD -# build and run gpio when output directory is the src dir. -# gpio has dependency on tools/gpio and builds tools/gpio -# objects in the src directory in all cases making the src -# repo dirty even when objects are relocated. -ifneq (1,$(DEFAULT_INSTALL_HDR_PATH)) - TMP := $(filter-out gpio, $(TARGETS)) - TARGETS := $(TMP) -endif - # set default goal to all, so make without a target runs all, even when # all isn't the first target in the file. .DEFAULT_GOAL := all --
Quoted 2 lines
2.30.0
Kent Gibson
reviewerPATCH v2 4/7 selftests: remove obsolete gpio references from kselftest_deps.sh
In reply to Kent GibsonGPIO Makefile has been greatly simplified so remove references to lines which no longer exist.
--- tools/testing/selftests/kselftest_deps.sh | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
tools/testing/selftests/kselftest_deps.sh +1 -3
@@ -129,13 +129,11 @@ l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \ grep -v "VAR_LDLIBS" | awk -F: '{print $1}') # Level 3 -# gpio, memfd and others use pkg-config to find mount and fuse libs +# memfd and others use pkg-config to find mount and fuse libs # respectively and save it in VAR_LDLIBS. If pkg-config doesn't find # any, VAR_LDLIBS set to default. # Use the default value and filter out pkg-config for dependency check. # e.g: -# gpio/Makefile -# VAR_LDLIBS := $(shell pkg-config --libs mount) 2>/dev/null) # memfd/Makefile # VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null)
Signature · 1 line
2.30.0
Re: [PATCH v2 4/7] selftests: remove obsolete gpio references from kselftest_deps.sh
Quoted 30 lines · Kent Gibson
GPIO
Makefilehas been greatly simplified so remove references to lines which no longer exist.Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>--- tools/testing/selftests/kselftest_deps.sh | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)tools/testing/selftests/kselftest_deps.sh +1
-4@@ -129,13 +129,11 @@ l2_tests=$(grep -r --include=Makefile ": LDLIBS" | \ grep -v "VAR_LDLIBS" | awk -F: '{print $1}') # Level 3 -# gpio, memfd and others use pkg-config to find mount and fuse libs +# memfd and others use pkg-config to find mount and fuse libs # respectively and save it in VAR_LDLIBS. If pkg-config doesn't find # any, VAR_LDLIBS set to default. # Use the default value and filter out pkg-config for dependency check. # e.g: -# gpio/Makefile -# VAR_LDLIBS := $(shell pkg-config --libs mount) 2>/dev/null) # memfd/Makefile # VAR_LDLIBS := $(shell pkg-config fuse --libs 2>/dev/null) --
Quoted 2 lines
2.30.0
Kent Gibson
reviewerPATCH v2 5/7 tools: gpio: remove uAPI v1 code no longer used by selftests
In reply to Kent Gibsongpio-mockup-chardev helper has been obsoleted and removed, so also remove the tools/gpio code that it, and nothing else, was using.
--- tools/gpio/gpio-utils.c | 89 ----------------------------------------- tools/gpio/gpio-utils.h | 6 --- 2 files changed, 95 deletions(-)
tools/gpio/gpio-utils.c +0 -89
@@ -32,74 +32,6 @@* following api will request gpio lines, do the operation and then * release these lines. */ -/** -* gpiotools_request_linehandle() - request gpio lines in a gpiochip -* @device_name: The name of gpiochip without prefix "/dev/", -* such as "gpiochip0" -* @lines: An array desired lines, specified by offset -* index for the associated GPIO device. -* @num_lines: The number of lines to request. -* @flag: The new flag for requsted gpio. Reference -* "linux/gpio.h" for the meaning of flag. -* @data: Default value will be set to gpio when flag is -* GPIOHANDLE_REQUEST_OUTPUT. -* @consumer_label: The name of consumer, such as "sysfs", -* "powerkey". This is useful for other users to -* know who is using. -* -* Request gpio lines through the ioctl provided by chardev. User -* could call gpiotools_set_values() and gpiotools_get_values() to -* read and write respectively through the returned fd. Call -* gpiotools_release_linehandle() to release these lines after that. -* -* Return: On success return the fd; -* On failure return the errno. -*/ -int gpiotools_request_linehandle (const char *device_name,unsigned int *lines, -unsigned int num_lines,unsigned int flag, -struct gpiohandle_data *data, -const char *consumer_label) -{ -struct gpiohandle_request req; -char *chrdev_name; -int fd; -int i; -int ret; - - ret =asprintf (&chrdev_name,"/dev/%s" , device_name); -if (ret <0 ) -return -ENOMEM ; - - fd =open (chrdev_name,0 ); -if (fd ==-1 ) { - ret = -errno; -fprintf (stderr,"Failed to open %s, %s\n" , - chrdev_name,strerror (errno)); - goto exit_free_name; - } - -for (i =0 ; i < num_lines; i++) - req.lineoffsets[i] = lines[i]; - - req.flags = flag; -strcpy (req.consumer_label, consumer_label); - req.lines = num_lines; -if (flag &GPIOHANDLE_REQUEST_OUTPUT ) -memcpy (req.default_values, data,sizeof (req.default_values)); - - ret =ioctl (fd,GPIO_GET_LINEHANDLE_IOCTL , &req); -if (ret ==-1 ) { - ret = -errno; -fprintf (stderr,"Failed to issue %s (%d), %s\n" , -"GPIO_GET_LINEHANDLE_IOCTL" , ret,strerror (errno)); - } - -if (close (fd) ==-1 ) -perror ("Failed to close GPIO character device file" ); -exit_free_name: -free (chrdev_name); -return ret <0 ? ret : req.fd; -}/** * gpiotools_request_line() - request gpio lines in a gpiochip
@@ -215,27 +147,6 @@ int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values)return ret; } -/** -* gpiotools_release_linehandle(): Release the line(s) of gpiochip -* @fd: The fd returned by -* gpiotools_request_linehandle(). -* -* Return: On success return 0; -* On failure return the errno. -*/ -int gpiotools_release_linehandle (const int fd) -{ -int ret; - - ret =close (fd); -if (ret ==-1 ) { -perror ("Failed to close GPIO LINEHANDLE device file" ); - ret = -errno; - } - -return ret; -} -/** * gpiotools_release_line(): Release the line(s) of gpiochip * @fd: The fd returned by
tools/gpio/gpio-utils.h +0 -6
@@ -24,12 +24,6 @@ static inline int check_prefix(const char *str, const char *prefix)strncmp (str, prefix,strlen (prefix)) ==0 ; } -int gpiotools_request_linehandle (const char *device_name,unsigned int *lines, -unsigned int num_lines,unsigned int flag, -struct gpiohandle_data *data, -const char *consumer_label); -int gpiotools_release_linehandle (const int fd); - int gpiotools_request_line(const char *device_name, unsigned int *lines, unsigned int num_lines,
Signature · 1 line
2.30.0
Re: [PATCH v2 5/7] tools: gpio: remove uAPI v1 code no longer used by selftests
Quoted 7 lines · Kent Gibson
gpio-mockup-chardev helper has been obsoleted and removed, so also remove the
tools/gpiocode that it, and nothing else, was using.Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>---
Kent Gibson
reviewerPATCH v2 6/7 selftests: gpio: port to GPIO uAPI v2
In reply to Kent GibsonAdd a port to the GPIO uAPI v2 interface and make it the default.
--- .../testing/selftests/gpio/gpio-mockup-cdev.c | 75 +++++++++++++++++-- tools/testing/selftests/gpio/gpio-mockup.sh | 11 ++- 2 files changed, 76 insertions(+), 10 deletions(-)
tools/testing/selftests/gpio/gpio-mockup-cdev.c +67 -8
@@ -18,6 +18,44 @@#define CONSUMER "gpio-mockup-cdev" +static int request_line_v2 (int cfd,unsigned int offset, +uint64_t flags,unsigned int val) +{ +struct gpio_v2_line_request req; +int ret; + +memset (&req,0 ,sizeof (req)); + req.num_lines =1 ; + req.offsets[0 ] = offset; + req.config.flags = flags; +strcpy (req.consumer,CONSUMER ); +if (flags &GPIO_V2_LINE_FLAG_OUTPUT ) { + req.config.num_attrs =1 ; + req.config.attrs[0 ].mask =1 ; + req.config.attrs[0 ].attr.id =GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES ; +if (val) + req.config.attrs[0 ].attr.values =1 ; + } + ret =ioctl (cfd,GPIO_V2_GET_LINE_IOCTL , &req); +if (ret ==-1 ) +return -errno; +return req.fd; +} + + +static int get_value_v2 (int lfd) +{ +struct gpio_v2_line_values vals; +int ret; + +memset (&vals,0 ,sizeof (vals)); + vals.mask =1 ; + ret =ioctl (lfd,GPIO_V2_LINE_GET_VALUES_IOCTL , &vals); +if (ret ==-1 ) +return -errno; +return vals.bits &0x1 ; +} +static int request_line_v1 (int cfd,unsigned int offset,uint32_t flags,unsigned int val) {
@@ -57,6 +95,7 @@ static void usage(char *prog)printf (" (default is to leave bias unchanged):\n" );printf (" -l: set line active low (default is active high)\n" );printf (" -s: set line value (default is to get line value)\n" ); +printf (" -u: uAPI version to use (default is 2)\n" );exit (-1 ); }
@@ -78,29 +117,42 @@ int main(int argc, char *argv[]) {char *chip;int opt, ret, cfd, lfd; -unsigned int offset, val; +unsigned int offset, val, abiv;uint32_t flags_v1; +uint64_t flags_v2; + abiv =2 ; ret =0 ; flags_v1 =GPIOHANDLE_REQUEST_INPUT ; + flags_v2 =GPIO_V2_LINE_FLAG_INPUT ;while ((opt =getopt (argc, argv,"lb:s:u:" )) !=-1 ) {switch (opt) {case 'l' : flags_v1 |=GPIOHANDLE_REQUEST_ACTIVE_LOW ; + flags_v2 |=GPIO_V2_LINE_FLAG_ACTIVE_LOW ;break ;case 'b' : -if (strcmp ("pull-up" , optarg) ==0 ) +if (strcmp ("pull-up" , optarg) ==0 ) { flags_v1 |=GPIOHANDLE_REQUEST_BIAS_PULL_UP ; -else if (strcmp ("pull-down" , optarg) ==0 ) + flags_v2 |=GPIO_V2_LINE_FLAG_BIAS_PULL_UP ; + }else if (strcmp ("pull-down" , optarg) ==0 ) { flags_v1 |=GPIOHANDLE_REQUEST_BIAS_PULL_DOWN ; -else if (strcmp ("disabled" , optarg) ==0 ) + flags_v2 |=GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN ; + }else if (strcmp ("disabled" , optarg) ==0 ) { flags_v1 |=GPIOHANDLE_REQUEST_BIAS_DISABLE ; + flags_v2 |=GPIO_V2_LINE_FLAG_BIAS_DISABLED ; + }break ;case 's' : val =atoi (optarg); flags_v1 &= ~GPIOHANDLE_REQUEST_INPUT ; flags_v1 |=GPIOHANDLE_REQUEST_OUTPUT ; + flags_v2 &= ~GPIO_V2_LINE_FLAG_INPUT ; + flags_v2 |=GPIO_V2_LINE_FLAG_OUTPUT ; +break ; +case 'u' : + abiv =atoi (optarg);break ;default :usage (argv[0 ]);
@@ -119,7 +171,10 @@ int main(int argc, char *argv[])return -errno; } - lfd =request_line_v1 (cfd, offset, flags_v1, val); +if (abiv ==1 ) + lfd =request_line_v1 (cfd, offset, flags_v1, val); +else + lfd =request_line_v2 (cfd, offset, flags_v2, val);close (cfd);
@@ -128,10 +183,14 @@ int main(int argc, char *argv[])return lfd; } -if (flags_v1 &GPIOHANDLE_REQUEST_OUTPUT ) +if (flags_v2 &GPIO_V2_LINE_FLAG_OUTPUT ) {wait_signal (); -else - ret =get_value_v1 (lfd); + }else { +if (abiv ==1 ) + ret =get_value_v1 (lfd); +else + ret =get_value_v2 (lfd); + }close (lfd);
tools/testing/selftests/gpio/gpio-mockup.sh +9 -2
@@ -14,6 +14,7 @@ module="gpio-mockup" verbose= full_test= random= +uapi_opt= active_opt= bias_opt= line_set_pid=
@@ -30,6 +31,7 @@ usage() echo "-r: test random lines as well as fence posts" echo "-t: interface type:" echo " cdev (character device ABI) - default" + echo " cdev_v1 (deprecated character device ABI)" echo " sysfs (deprecated SYSFS ABI)" echo "-v: verbose progress reporting" exit $ksft_fail
@@ -100,7 +102,8 @@ get_line() { release_line - $BASE/gpio-mockup-cdev $active_opt /dev/$chip $offset + local cdev_opts=${uapi_opt}${active_opt} + $BASE/gpio-mockup-cdev $cdev_opts /dev/$chip $offset echo $? }
@@ -142,7 +145,7 @@ set_line() esac done - local cdev_opts=${active_opt} + local cdev_opts=${uapi_opt}${active_opt} if [ "$val" ]; then $BASE/gpio-mockup-cdev $cdev_opts -s$val /dev/$chip $offset & # failure to set is detected by reading mockup and toggling values
@@ -340,6 +343,10 @@ sysfs) source $BASE/gpio-mockup-sysfs.sh echo "WARNING: gpio sysfs ABI is deprecated." ;; +cdev_v1) + echo "WARNING: gpio cdev ABI v1 is deprecated." + uapi_opt="-u1 " + ;; cdev) ;; *)
Signature · 1 line
2.30.0
Re: [PATCH v2 6/7] selftests: gpio: port to GPIO uAPI v2
Quoted 5 lines · Kent Gibson
Add a port to the GPIO uAPI v2 interface and make it the default.
Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>
Kent Gibson
reviewerPATCH v2 7/7 selftests: gpio: add CONFIG_GPIO_CDEV to config
In reply to Kent GibsonGPIO CDEV is now optional and required for the selftests so add it to the config.
--- tools/testing/selftests/gpio/config | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/gpio/config +1 -0
@@ -1,2 +1,3 @@ CONFIG_GPIOLIB=y +CONFIG_GPIO_CDEV=y CONFIG_GPIO_MOCKUP=m
Signature · 1 line
2.30.0
Re: [PATCH v2 7/7] selftests: gpio: add CONFIG_GPIO_CDEV to config
Quoted 19 lines · Kent Gibson
GPIO CDEV is now optional and required for the selftests so add it to the config.
Signed-off-by Kent Gibson <[email protected]>Acked-by Linus Walleij <[email protected]>--- tools/testing/selftests/gpio/config | 1 + 1 file changed, 1 insertion(+)tools/testing/selftests/gpio/config +1
-1@@ -1,2 +1,3 @@ CONFIG_GPIOLIB=y +CONFIG_GPIO_CDEV=y CONFIG_GPIO_MOCKUP=m --
Quoted 2 lines
2.30.0
Quoted 7 lines · Kent Gibson
selftests: gpio: rework and simplify test implementation
selftests: gpio: remove obsoletegpio-mockup-chardev.c
selftests: remove obsolete build restriction for gpio
selftests: remove obsolete gpio references fromkselftest_deps.sh
tools: gpio: remove uAPI v1 code no longer used by selftests
selftests: gpio: port to GPIO uAPI v2
selftests: gpio: addCONFIG_GPIO_CDEVto config
Bartosz I think you can just merge these patches into the GPIO tree, at least I think that is what I have done in the past.
Yours,
Linus Walleij
Kent Gibson
reviewerQuoted 10 lines · Linus Walleij
Quoted 7 lines · Kent Gibson
selftests: gpio: rework and simplify test implementation
selftests: gpio: remove obsoletegpio-mockup-chardev.c
selftests: remove obsolete build restriction for gpio
selftests: remove obsolete gpio references fromkselftest_deps.sh
tools: gpio: remove uAPI v1 code no longer used by selftests
selftests: gpio: port to GPIO uAPI v2
selftests: gpio: addCONFIG_GPIO_CDEVto config
Quoted 3 lines
Bartosz I think you can just merge these patches into the GPIO tree, at least I think that is what I have done in the past.
Could you touch up that Fixes tag in patch 1 if you merge v2?
Thanks,
Kent.
Quoted 12 lines · Kent Gibson
Quoted 10 lines · Linus Walleij
Quoted 7 lines · Kent Gibson
selftests: gpio: rework and simplify test implementation
selftests: gpio: remove obsoletegpio-mockup-chardev.c
selftests: remove obsolete build restriction for gpio
selftests: remove obsolete gpio references fromkselftest_deps.sh
tools: gpio: remove uAPI v1 code no longer used by selftests
selftests: gpio: port to GPIO uAPI v2
selftests: gpio: addCONFIG_GPIO_CDEVto config
Quoted 8 lines
Quoted 3 lines
Bartosz I think you can just merge these patches into the GPIO tree, at least I think that is what I have done in the past.
Could you touch up that Fixes tag in patch 1 if you merge v2?
Thanks,
Kent.
Kent,
This doesn't apply to my for-next branch - there's a conflict in tools/testing/selftests/gpio/Makefile, could you take a look?
Bartosz
Kent Gibson
reviewerQuoted 19 lines · Bartosz Golaszewski
Quoted 18 lines · Kent Gibson
Quoted 10 lines · Linus Walleij
Quoted 7 lines · Kent Gibson
selftests: gpio: rework and simplify test implementation
selftests: gpio: remove obsoletegpio-mockup-chardev.c
selftests: remove obsolete build restriction for gpio
selftests: remove obsolete gpio references fromkselftest_deps.sh
tools: gpio: remove uAPI v1 code no longer used by selftests
selftests: gpio: port to GPIO uAPI v2
selftests: gpio: addCONFIG_GPIO_CDEVto configQuoted 3 lines
Bartosz I think you can just merge these patches into the GPIO tree, at least I think that is what I have done in the past.
Could you touch up that Fixes tag in patch 1 if you merge v2?
Quoted 8 lines
Quoted 2 lines
Thanks,
Kent.Kent,
This doesn't apply to my for-next branch - there's a conflict in
tools/testing/selftests/gpio/Makefile, could you take a look?
Which is your for-next branch?
The patch set is based on and applies cleanly to gpio/for-next 7ac554888233, so I'm not sure which branch you are targetting.
Cheers,
Kent.
Quoted 30 lines · Kent Gibson
Quoted 19 lines · Bartosz Golaszewski
Quoted 18 lines · Kent Gibson
Quoted 10 lines · Linus Walleij
Quoted 7 lines · Kent Gibson
selftests: gpio: rework and simplify test implementation
selftests: gpio: remove obsoletegpio-mockup-chardev.c
selftests: remove obsolete build restriction for gpio
selftests: remove obsolete gpio references fromkselftest_deps.sh
tools: gpio: remove uAPI v1 code no longer used by selftests
selftests: gpio: port to GPIO uAPI v2
selftests: gpio: addCONFIG_GPIO_CDEVto configQuoted 3 lines
Bartosz I think you can just merge these patches into the GPIO tree, at least I think that is what I have done in the past.
Could you touch up that Fixes tag in patch 1 if you merge v2?
Quoted 8 lines
Quoted 2 lines
Thanks,
Kent.Kent,
This doesn't apply to my for-next branch - there's a conflict in
tools/testing/selftests/gpio/Makefile, could you take a look?
Quoted 7 lines
Which is your for-next branch?
The patch set is based on and applies cleanly to gpio/for-next
7ac554888233, so I'm not sure which branch you are targetting.Cheers,
Kent.
Linus W is not picking up patches this release - everything goes through:
git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git gpio/for-next
Sorry for the confusion.
Bartosz
Kent Gibson
reviewerQuoted 36 lines · Bartosz Golaszewski
Quoted 35 lines · Kent Gibson
Quoted 19 lines · Bartosz Golaszewski
Quoted 18 lines · Kent Gibson
Quoted 10 lines · Linus Walleij
Quoted 7 lines · Kent Gibson
selftests: gpio: rework and simplify test implementation
selftests: gpio: remove obsoletegpio-mockup-chardev.c
selftests: remove obsolete build restriction for gpio
selftests: remove obsolete gpio references fromkselftest_deps.sh
tools: gpio: remove uAPI v1 code no longer used by selftests
selftests: gpio: port to GPIO uAPI v2
selftests: gpio: addCONFIG_GPIO_CDEVto configQuoted 3 lines
Bartosz I think you can just merge these patches into the GPIO tree, at least I think that is what I have done in the past.
Could you touch up that Fixes tag in patch 1 if you merge v2?
Quoted 8 lines
Quoted 2 lines
Thanks,
Kent.Kent,
This doesn't apply to my for-next branch - there's a conflict in
tools/testing/selftests/gpio/Makefile, could you take a look?Which is your for-next branch?
The patch set is based on and applies cleanly to gpio/for-next
7ac554888233, so I'm not sure which branch you are targetting.
Quoted 9 lines
Quoted 2 lines
Cheers,
Kent.Linus W is not picking up patches this release - everything goes through:
git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git gpio/for-next
Sorry for the confusion.
Ah, ok Michael Ellerman has been improving the Makefile toworkaround the build dependency issues for some cases.
My changes supersede all that - a basic Makefile is now sufficient. I'll send out a v3 shortly.
Cheers,
Kent.