Skip to contentSkip to conversation

drm/panel: panel-simple: add bus-format and connector-type to Innolux n116bge

PATCH Applied Heiko Stuebner 2 participants 3 messages Jan 9, 2021 – Jan 18, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/panel: panel-simple: add bus-format and connector-type to Innolux n116bge

From: Heiko Stuebner <[email protected]>

The Innolux n116bge panel has an eDP connector and 3*6 bits bus format.

---
 drivers/gpu/drm/panel/panel-simple.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +2 -0
index 41bbec72b2da..a0b65d263dce 100644
@@ -2265,6 +2265,8 @@ static const struct panel_desc innolux_n116bge = {
 		.width = 256,
 		.height = 144,
 	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+	.connector_type = DRM_MODE_CONNECTOR_eDP,
 };
 
 static const struct drm_display_mode innolux_n125hce_gn1_mode = {
Signature · 1 line
2.29.2
Reviewed-by on v1 1/1
#1 lore raw

Hi,

Quoted 9 lines · Heiko Stuebner

From: Heiko Stuebner <[email protected]>

The Innolux n116bge panel has an eDP connector and 3*6 bits bus format.

---
 drivers/gpu/drm/panel/panel-simple.c | 2 ++
 1 file changed, 2 insertions(+)

This looks right to me.

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

author Applied
#2 lore raw
In reply to Heiko Stuebner
Quoted 1 line · Heiko Stuebner

The Innolux n116bge panel has an eDP connector and 3*6 bits bus format.

Applied, thanks!

[1/1] drm/panel: panel-simple: add bus-format and connector-type to Innolux n116bge

      commit: 87969bcd49480508568070fd93d7367f03316aa9

Best regards,

Signature · 5 lines
Heiko Stuebner <[email protected]>
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel