Skip to contentSkip to conversation

dt-bindings: iio: magnetometer: bmc150: Document regulator supplies

PATCH In review Stephan Gerhold 2 participants 3 messages Jan 9, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 dt-bindings: iio: magnetometer: bmc150: Document regulator supplies

BMC150 needs VDD and VDDIO regulators that might need to be explicitly enabled. Document support for vdd/vddio-supply to implement this.

---
Changes in v2: Picked up Reviewed-by:, split patch series from bmg160

---
 .../bindings/iio/magnetometer/bosch,bmc150_magn.yaml           | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml +3 -0
index cdef7aeba708..2867ab6bf9b0 100644
@@ -30,6 +30,9 @@ properties:
   reg:
     maxItems: 1
 
+  vdd-supply: true
+  vddio-supply: true
+
   interrupts:
     maxItems: 1
 
Signature · 1 line
2.30.0
#1 lore raw

PATCH v2 2/2 iio: magnetometer: bmc150: Add rudimentary regulator support

BMC150 needs VDD and VDDIO regulators that might need to be explicitly enabled. Add some rudimentary support to obtain and enable these regulators during probe() and disable them during remove() or on the error path.

---
This is mostly copy-paste of
079c1c3f2082 ("iio: accel: bmc150-accel: Add rudimentary regulator support") from Linus Walleij but for the BMC150 magnetometer driver.

Changes in v2: Picked up Reviewed-by:, split patch series from bmg160

---
 drivers/iio/magnetometer/bmc150_magn.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
drivers/iio/magnetometer/bmc150_magn.c +25 -1
index fa09fcab620a..b2f3129e1b4f 100644
@@ -25,6 +25,7 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include "bmc150_magn.h"
 
@@ -135,6 +136,7 @@ struct bmc150_magn_data {
 	 */
 	struct mutex mutex;
 	struct regmap *regmap;
+	struct regulator_bulk_data regulators[2];
 	struct iio_mount_matrix orientation;
 	/* 4 x 32 bits for x, y z, 4 bytes align, 64 bits timestamp */
 	s32 buffer[6];
@@ -692,12 +694,24 @@ static int bmc150_magn_init(struct bmc150_magn_data *data)
 	int ret, chip_id;
 	struct bmc150_magn_preset preset;
 
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+				    data->regulators);
+	if (ret < 0) {
+		dev_err(data->dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+	/*
+	 * 3ms power-on time according to datasheet, let's better
+	 * be safe than sorry and set this delay to 5ms.
+	 */
+	msleep(5);
+
 	ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND,
 					 false);
 	if (ret < 0) {
 		dev_err(data->dev,
 			"Failed to bring up device from suspend mode\n");
-		return ret;
+		goto err_regulator_disable;
 	}
 
 	ret = regmap_read(data->regmap, BMC150_MAGN_REG_CHIP_ID, &chip_id);
@@ -752,6 +766,8 @@ static int bmc150_magn_init(struct bmc150_magn_data *data)
 
 err_poweroff:
 	bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true);
+err_regulator_disable:
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
 	return ret;
 }
 
@@ -867,6 +883,13 @@ int bmc150_magn_probe(struct device *dev, struct regmap *regmap,
 	data->irq = irq;
 	data->dev = dev;
 
+	data->regulators[0].supply = "vdd";
+	data->regulators[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators),
+				      data->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get regulators\n");
+
 	ret = iio_read_mount_matrix(dev, "mount-matrix",
 				&data->orientation);
 	if (ret)
@@ -984,6 +1007,7 @@ int bmc150_magn_remove(struct device *dev)
 	bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true);
 	mutex_unlock(&data->mutex);
 
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
 	return 0;
 }
 EXPORT_SYMBOL(bmc150_magn_remove);
Signature · 1 line
2.30.0
maintainer
#2 lore raw
In reply to Stephan Gerhold
Quoted 6 lines · On Sat, 9 Jan 2021 16:23:26 +0100 Stephan Gerhold <[email protected]> wrote:

BMC150 needs VDD and VDDIO regulators that might need to be explicitly enabled. Document support for vdd/vddio-supply to implement this.

Thanks for the quick resend!

Series applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to poke at it and see if they can find anything we missed.

Jonathan

Quoted 20 lines

---
Changes in v2: Picked up Reviewed-by:, split patch series from bmg160

---
 .../bindings/iio/magnetometer/bosch,bmc150_magn.yaml           | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml +3 -0
index cdef7aeba708..2867ab6bf9b0 100644
@@ -30,6 +30,9 @@ properties:
   reg:
     maxItems: 1
 
+  vdd-supply: true
+  vddio-supply: true
+
   interrupts:
     maxItems: 1