arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1
The WiFi chip is capable of communication at SDR104 speeds. Enable 100Mhz and 200MHz pinmux to support this.
Signed-off-by Adam Ford <[email protected]>
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +3 -1
@@ -256,8 +256,10 @@ bluetooth { &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <4>; non-removable; cap-power-off-card;
Signature · 1 line
2.25.1
Quoted 5 lines · Adam Ford
The WiFi chip is capable of communication at SDR104 speeds. Enable 100Mhz and 200MHz pinmux to support this.
Signed-off-by Adam Ford <[email protected]>
Reviewed-by Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Shawn Guo
AppliedQuoted 4 lines · Adam Ford
The WiFi chip is capable of communication at SDR104 speeds. Enable 100Mhz and 200MHz pinmux to support this.
Signed-off-by Adam Ford <[email protected]>
Applied, thanks.