Skip to contentSkip to conversation

influxdb: add new recipe

PATCH In review Thomas Perrot 2 participants 6 messages Jan 11, 2021 – Jan 13, 2021

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 influxdb: add new recipe

InfluxDB is a time series database designed to handle high write and query loads.

---
 .../recipes-dbs/influxdb/influxdb/influxdb    | 235 +++++++
 .../influxdb/influxdb/influxdb.conf           | 586 ++++++++++++++++++
 .../recipes-dbs/influxdb/influxdb_1.7.10.bb   |  63 ++
 3 files changed, 884 insertions(+)
 create mode 100755 meta-oe/recipes-dbs/influxdb/influxdb/influxdb
 create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf
 create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb
meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +235 -0
new file mode 100755
index 000000000..ffb29c3ae
@@ -0,0 +1,235 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides:          influxd
+# Required-Start:    $all
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start the InfluxDB process
+### END INIT INFO
+set -x
+# If you modify this, please make sure to also edit influxdb.service
+
+# Command-line options that can be set in /etc/default/influxdb.  These will override
+# any config file values.
+DEFAULT=/etc/default/influxdb
+
+# Daemon options
+INFLUXD_OPTS=
+
+# Process name ( For display )
+NAME=influxdb
+
+# User and group
+USER=influxdb
+GROUP=influxdb
+
+# Check for sudo or root privileges before continuing
+if [ "$UID" != "0" ]; then
+    echo "You must be root to run this script"
+    exit 1
+fi
+
+# Daemon name, where is the actual executable If the daemon is not
+# there, then exit.
+DAEMON=/usr/bin/influxd
+if [ ! -x $DAEMON ]; then
+    echo "Executable $DAEMON does not exist!"
+    exit 5
+fi
+
+# Configuration file
+CONFIG=/etc/influxdb/influxdb.conf
+
+# PID file for the daemon
+PIDFILE=/var/run/influxdb/influxd.pid
+PIDDIR=`dirname $PIDFILE`
+if [ ! -d "$PIDDIR" ]; then
+    mkdir -p $PIDDIR
+    chown $USER:$GROUP $PIDDIR
+fi
+
+# Max open files
+OPEN_FILE_LIMIT=65536
+
+if [ -r /lib/lsb/init-functions ]; then
+    source /lib/lsb/init-functions
+fi
+
+# Logging
+if [ -z "$STDOUT" ]; then
+    STDOUT=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDOUT" ]; then
+    mkdir -p $(dirname $STDOUT)
+fi
+
+if [ -z "$STDERR" ]; then
+    STDERR=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDERR" ]; then
+    mkdir -p $(dirname $STDERR)
+fi
+
+# Override init script variables with DEFAULT values
+if [ -r $DEFAULT ]; then
+    source $DEFAULT
+fi
+
+function log_failure_msg() {
+    echo "$@" "[ FAILED ]"
+}
+
+function log_success_msg() {
+    echo "$@" "[ OK ]"
+}
+
+function start() {
+    # Check if config file exist
+    if [ ! -r $CONFIG ]; then
+        log_failure_msg "config file $CONFIG doesn't exist (or you don't have permission to view)"
+        exit 4
+    fi
+
+    # Check that the PID file exists, and check the actual status of process
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # Process is already up
+            log_success_msg "$NAME process is already running"
+            return 0
+        fi
+    else
+        su -s /bin/sh -c "touch $PIDFILE" $USER &>/dev/null
+        if [ $? -ne 0 ]; then
+            log_failure_msg "$PIDFILE not writable, check permissions"
+            exit 5
+        fi
+    fi
+
+    # Bump the file limits, before launching the daemon. These will
+    # carry over to launched processes.
+    ulimit -n $OPEN_FILE_LIMIT
+    if [ $? -ne 0 ]; then
+        log_failure_msg "Unable to set ulimit to $OPEN_FILE_LIMIT"
+        exit 1
+    fi
+
+    # Launch process
+    echo "Starting $NAME..."
+    if command -v start-stop-daemon &>/dev/null; then
+        start-stop-daemon \
+            --background \
+            --chuid $USER:$GROUP \
+            --start \
+            --quiet \
+            --pidfile $PIDFILE \
+            --exec $DAEMON \
+            -- \
+            -config $CONFIG \
+            $INFLUXD_OPTS >>$STDOUT 2>>$STDERR
+    else
+        local CMD="$DAEMON -config $CONFIG $INFLUXD_OPTS >>$STDOUT 2>>$STDERR &"
+        su -s /bin/sh -c "$CMD" $USER
+    fi
+
+    # Sleep to verify process is still up
+    sleep 1
+    echo $(pidof influxd) > $PIDFILE
+    if [ -f $PIDFILE ]; then
+        # PIDFILE exists
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # PID up, service running
+            log_success_msg "$NAME process was started"
+            return 0
+        fi
+    fi
+    log_failure_msg "$NAME process was unable to start"
+    exit 1
+}
+
+function stop() {
+    # Stop the daemon.
+    if [ -f $PIDFILE ]; then
+        local PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            echo "Stopping $NAME..."
+            # Process still up, send SIGTERM and remove PIDFILE
+            kill -s TERM $PID &>/dev/null && rm -f "$PIDFILE" &>/dev/null
+            n=0
+            while true; do
+                # Enter loop to ensure process is stopped
+                kill -0 $PID &>/dev/null
+                if [ "$?" != "0" ]; then
+                    # Process stopped, break from loop
+                    log_success_msg "$NAME process was stopped"
+                    return 0
+                fi
+
+                # Process still up after signal, sleep and wait
+                sleep 1
+                n=$(expr $n + 1)
+                if [ $n -eq 30 ]; then
+                    # After 30 seconds, send SIGKILL
+                    echo "Timeout exceeded, sending SIGKILL..."
+                    kill -s KILL $PID &>/dev/null
+                elif [ $? -eq 40 ]; then
+                    # After 40 seconds, error out
+                    log_failure_msg "could not stop $NAME process"
+                    exit 1
+                fi
+            done
+        fi
+    fi
+    log_success_msg "$NAME process already stopped"
+}
+
+function restart() {
+    # Restart the daemon.
+    stop
+    start
+}
+
+function status() {
+    # Check the status of the process.
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            log_success_msg "$NAME process is running"
+            exit 0
+        fi
+    fi
+    log_failure_msg "$NAME process is not running"
+    exit 1
+}
+
+case $1 in
+    start)
+        start
+        ;;
+
+    stop)
+        stop
+        ;;
+
+    restart)
+        restart
+        ;;
+
+    status)
+        status
+        ;;
+
+    version)
+        $DAEMON version
+        ;;
+
+    *)
+        # For invalid arguments, print the usage message.
+        echo "Usage: $0 {start|stop|restart|status|version}"
+        exit 2
+        ;;
+esac
meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +586 -0

586 lines not on this page · raw message

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +63 -0

63 lines not on this page · raw message

Signature · 1 line
2.29.2
#1 lore raw

Hi Thomas

This fails on mips see
https://errors.yoctoproject.org/Errors/Details/540902/

# github.com/pkg/term/termios
../../../../pkg/mod/github.com/pkg/[email protected]/termios/termios_linux.go:78:61:
attr.Ispeed undefined (type *syscall.Termios has no field or method
Ispeed)
../../../../pkg/mod/github.com/pkg/[email protected]/termios/termios_linux.go:81:61:
attr.Ospeed undefined (type *syscall.Termios has no field or method
Ospeed)

I think these perhaps can be fixed in term package maybe just comment them out.

Thanks
-Khem

Quoted 922 lines · Thomas Perrot

InfluxDB is a time series database designed to handle high write and query loads.

---
 .../recipes-dbs/influxdb/influxdb/influxdb    | 235 +++++++
 .../influxdb/influxdb/influxdb.conf           | 586 ++++++++++++++++++
 .../recipes-dbs/influxdb/influxdb_1.7.10.bb   |  63 ++
 3 files changed, 884 insertions(+)
 create mode 100755 meta-oe/recipes-dbs/influxdb/influxdb/influxdb
 create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf
 create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb
meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +235 -0
new file mode 100755
index 000000000..ffb29c3ae
@@ -0,0 +1,235 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides:          influxd
+# Required-Start:    $all
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start the InfluxDB process
+### END INIT INFO
+set -x
+# If you modify this, please make sure to also edit influxdb.service
+
+# Command-line options that can be set in /etc/default/influxdb.  These will override
+# any config file values.
+DEFAULT=/etc/default/influxdb
+
+# Daemon options
+INFLUXD_OPTS=
+
+# Process name ( For display )
+NAME=influxdb
+
+# User and group
+USER=influxdb
+GROUP=influxdb
+
+# Check for sudo or root privileges before continuing
+if [ "$UID" != "0" ]; then
+    echo "You must be root to run this script"
+    exit 1
+fi
+
+# Daemon name, where is the actual executable If the daemon is not
+# there, then exit.
+DAEMON=/usr/bin/influxd
+if [ ! -x $DAEMON ]; then
+    echo "Executable $DAEMON does not exist!"
+    exit 5
+fi
+
+# Configuration file
+CONFIG=/etc/influxdb/influxdb.conf
+
+# PID file for the daemon
+PIDFILE=/var/run/influxdb/influxd.pid
+PIDDIR=`dirname $PIDFILE`
+if [ ! -d "$PIDDIR" ]; then
+    mkdir -p $PIDDIR
+    chown $USER:$GROUP $PIDDIR
+fi
+
+# Max open files
+OPEN_FILE_LIMIT=65536
+
+if [ -r /lib/lsb/init-functions ]; then
+    source /lib/lsb/init-functions
+fi
+
+# Logging
+if [ -z "$STDOUT" ]; then
+    STDOUT=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDOUT" ]; then
+    mkdir -p $(dirname $STDOUT)
+fi
+
+if [ -z "$STDERR" ]; then
+    STDERR=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDERR" ]; then
+    mkdir -p $(dirname $STDERR)
+fi
+
+# Override init script variables with DEFAULT values
+if [ -r $DEFAULT ]; then
+    source $DEFAULT
+fi
+
+function log_failure_msg() {
+    echo "$@" "[ FAILED ]"
+}
+
+function log_success_msg() {
+    echo "$@" "[ OK ]"
+}
+
+function start() {
+    # Check if config file exist
+    if [ ! -r $CONFIG ]; then
+        log_failure_msg "config file $CONFIG doesn't exist (or you don't have permission to view)"
+        exit 4
+    fi
+
+    # Check that the PID file exists, and check the actual status of process
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # Process is already up
+            log_success_msg "$NAME process is already running"
+            return 0
+        fi
+    else
+        su -s /bin/sh -c "touch $PIDFILE" $USER &>/dev/null
+        if [ $? -ne 0 ]; then
+            log_failure_msg "$PIDFILE not writable, check permissions"
+            exit 5
+        fi
+    fi
+
+    # Bump the file limits, before launching the daemon. These will
+    # carry over to launched processes.
+    ulimit -n $OPEN_FILE_LIMIT
+    if [ $? -ne 0 ]; then
+        log_failure_msg "Unable to set ulimit to $OPEN_FILE_LIMIT"
+        exit 1
+    fi
+
+    # Launch process
+    echo "Starting $NAME..."
+    if command -v start-stop-daemon &>/dev/null; then
+        start-stop-daemon \
+            --background \
+            --chuid $USER:$GROUP \
+            --start \
+            --quiet \
+            --pidfile $PIDFILE \
+            --exec $DAEMON \
+            -- \
+            -config $CONFIG \
+            $INFLUXD_OPTS >>$STDOUT 2>>$STDERR
+    else
+        local CMD="$DAEMON -config $CONFIG $INFLUXD_OPTS >>$STDOUT 2>>$STDERR &"
+        su -s /bin/sh -c "$CMD" $USER
+    fi
+
+    # Sleep to verify process is still up
+    sleep 1
+    echo $(pidof influxd) > $PIDFILE
+    if [ -f $PIDFILE ]; then
+        # PIDFILE exists
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # PID up, service running
+            log_success_msg "$NAME process was started"
+            return 0
+        fi
+    fi
+    log_failure_msg "$NAME process was unable to start"
+    exit 1
+}
+
+function stop() {
+    # Stop the daemon.
+    if [ -f $PIDFILE ]; then
+        local PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            echo "Stopping $NAME..."
+            # Process still up, send SIGTERM and remove PIDFILE
+            kill -s TERM $PID &>/dev/null && rm -f "$PIDFILE" &>/dev/null
+            n=0
+            while true; do
+                # Enter loop to ensure process is stopped
+                kill -0 $PID &>/dev/null
+                if [ "$?" != "0" ]; then
+                    # Process stopped, break from loop
+                    log_success_msg "$NAME process was stopped"
+                    return 0
+                fi
+
+                # Process still up after signal, sleep and wait
+                sleep 1
+                n=$(expr $n + 1)
+                if [ $n -eq 30 ]; then
+                    # After 30 seconds, send SIGKILL
+                    echo "Timeout exceeded, sending SIGKILL..."
+                    kill -s KILL $PID &>/dev/null
+                elif [ $? -eq 40 ]; then
+                    # After 40 seconds, error out
+                    log_failure_msg "could not stop $NAME process"
+                    exit 1
+                fi
+            done
+        fi
+    fi
+    log_success_msg "$NAME process already stopped"
+}
+
+function restart() {
+    # Restart the daemon.
+    stop
+    start
+}
+
+function status() {
+    # Check the status of the process.
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            log_success_msg "$NAME process is running"
+            exit 0
+        fi
+    fi
+    log_failure_msg "$NAME process is not running"
+    exit 1
+}
+
+case $1 in
+    start)
+        start
+        ;;
+
+    stop)
+        stop
+        ;;
+
+    restart)
+        restart
+        ;;
+
+    status)
+        status
+        ;;
+
+    version)
+        $DAEMON version
+        ;;
+
+    *)
+        # For invalid arguments, print the usage message.
+        echo "Usage: $0 {start|stop|restart|status|version}"
+        exit 2
+        ;;
+esac
meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +586 -0
new file mode 100644
index 000000000..21c0926f2
@@ -0,0 +1,586 @@
+### Welcome to the InfluxDB configuration file.
+
+# The values in this file override the default values used by the system if
+# a config option is not specified. The commented out lines are the configuration
+# field and the default value used. Uncommenting a line and changing the value
+# will change the value used at runtime when the process is restarted.
+
+# Once every 24 hours InfluxDB will report usage data to usage.influxdata.com
+# The data includes a random ID, os, arch, version, the number of series and other
+# usage data. No data from user databases is ever transmitted.
+# Change this option to true to disable reporting.
+# reporting-disabled = false
+
+# Bind address to use for the RPC service for backup and restore.
+# bind-address = "127.0.0.1:8088"
+
+###
+### [meta]
+###
+### Controls the parameters for the Raft consensus group that stores metadata
+### about the InfluxDB cluster.
+###
+
+[meta]
+  # Where the metadata/raft database is stored
+  dir = "/var/lib/influxdb/meta"
+
+  # Automatically create a default retention policy when creating a database.
+  # retention-autocreate = true
+
+  # If log messages are printed for the meta service
+  # logging-enabled = true
+
+###
+### [data]
+###
+### Controls where the actual shard data for InfluxDB lives and how it is
+### flushed from the WAL. "dir" may need to be changed to a suitable place
+### for your system, but the WAL settings are an advanced configuration. The
+### defaults should work for most systems.
+###
+
+[data]
+  # The directory where the TSM storage engine stores TSM files.
+  dir = "/var/lib/influxdb/data"
+
+  # The directory where the TSM storage engine stores WAL files.
+  wal-dir = "/var/lib/influxdb/wal"
+
+  # The amount of time that a write will wait before fsyncing.  A duration
+  # greater than 0 can be used to batch up multiple fsync calls.  This is useful for slower
+  # disks or when WAL write contention is seen.  A value of 0s fsyncs every write to the WAL.
+  # Values in the range of 0-100ms are recommended for non-SSD disks.
+  # wal-fsync-delay = "0s"
+
+
+  # The type of shard index to use for new shards.  The default is an in-memory index that is
+  # recreated at startup.  A value of "tsi1" will use a disk based index that supports higher
+  # cardinality datasets.
+  # index-version = "inmem"
+
+  # Trace logging provides more verbose output around the tsm engine. Turning
+  # this on can provide more useful output for debugging tsm engine issues.
+  # trace-logging-enabled = false
+
+  # Whether queries should be logged before execution. Very useful for troubleshooting, but will
+  # log any sensitive data contained within a query.
+  # query-log-enabled = true
+
+  # Validates incoming writes to ensure keys only have valid unicode characters.
+  # This setting will incur a small overhead because every key must be checked.
+  # validate-keys = false
+
+  # Settings for the TSM engine
+
+  # CacheMaxMemorySize is the maximum size a shard's cache can
+  # reach before it starts rejecting writes.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # cache-max-memory-size = "1g"
+
+  # CacheSnapshotMemorySize is the size at which the engine will
+  # snapshot the cache and write it to a TSM file, freeing up memory
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # cache-snapshot-memory-size = "25m"
+
+  # CacheSnapshotWriteColdDuration is the length of time at
+  # which the engine will snapshot the cache and write it to
+  # a new TSM file if the shard hasn't received writes or deletes
+  # cache-snapshot-write-cold-duration = "10m"
+
+  # CompactFullWriteColdDuration is the duration at which the engine
+  # will compact all TSM files in a shard if it hasn't received a
+  # write or delete
+  # compact-full-write-cold-duration = "4h"
+
+  # The maximum number of concurrent full and level compactions that can run at one time.  A
+  # value of 0 results in 50% of runtime.GOMAXPROCS(0) used at runtime.  Any number greater
+  # than 0 limits compactions to that value.  This setting does not apply
+  # to cache snapshotting.
+  # max-concurrent-compactions = 0
+
+  # CompactThroughput is the rate limit in bytes per second that we
+  # will allow TSM compactions to write to disk. Note that short bursts are allowed
+  # to happen at a possibly larger value, set by CompactThroughputBurst
+  # compact-throughput = "48m"
+
+  # CompactThroughputBurst is the rate limit in bytes per second that we
+  # will allow TSM compactions to write to disk.
+  # compact-throughput-burst = "48m"
+
+  # If true, then the mmap advise value MADV_WILLNEED will be provided to the kernel with respect to
+  # TSM files. This setting has been found to be problematic on some kernels, and defaults to off.
+  # It might help users who have slow disks in some cases.
+  # tsm-use-madv-willneed = false
+
+  # Settings for the inmem index
+
+  # The maximum series allowed per database before writes are dropped.  This limit can prevent
+  # high cardinality issues at the database level.  This limit can be disabled by setting it to
+  # 0.
+  # max-series-per-database = 1000000
+
+  # The maximum number of tag values per tag that are allowed before writes are dropped.  This limit
+  # can prevent high cardinality tag values from being written to a measurement.  This limit can be
+  # disabled by setting it to 0.
+  # max-values-per-tag = 100000
+
+  # Settings for the tsi1 index
+
+  # The threshold, in bytes, when an index write-ahead log file will compact
+  # into an index file. Lower sizes will cause log files to be compacted more
+  # quickly and result in lower heap usage at the expense of write throughput.
+  # Higher sizes will be compacted less frequently, store more series in-memory,
+  # and provide higher write throughput.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # max-index-log-file-size = "1m"
+
+  # The size of the internal cache used in the TSI index to store previously
+  # calculated series results. Cached results will be returned quickly from the cache rather
+  # than needing to be recalculated when a subsequent query with a matching tag key/value
+  # predicate is executed. Setting this value to 0 will disable the cache, which may
+  # lead to query performance issues.
+  # This value should only be increased if it is known that the set of regularly used
+  # tag key/value predicates across all measurements for a database is larger than 100. An
+  # increase in cache size may lead to an increase in heap usage.
+  series-id-set-cache-size = 100
+
+###
+### [coordinator]
+###
+### Controls the clustering service configuration.
+###
+
+[coordinator]
+  # The default time a write request will wait until a "timeout" error is returned to the caller.
+  # write-timeout = "10s"
+
+  # The maximum number of concurrent queries allowed to be executing at one time.  If a query is
+  # executed and exceeds this limit, an error is returned to the caller.  This limit can be disabled
+  # by setting it to 0.
+  # max-concurrent-queries = 0
+
+  # The maximum time a query will is allowed to execute before being killed by the system.  This limit
+  # can help prevent run away queries.  Setting the value to 0 disables the limit.
+  # query-timeout = "0s"
+
+  # The time threshold when a query will be logged as a slow query.  This limit can be set to help
+  # discover slow or resource intensive queries.  Setting the value to 0 disables the slow query logging.
+  # log-queries-after = "0s"
+
+  # The maximum number of points a SELECT can process.  A value of 0 will make
+  # the maximum point count unlimited.  This will only be checked every second so queries will not
+  # be aborted immediately when hitting the limit.
+  # max-select-point = 0
+
+  # The maximum number of series a SELECT can run.  A value of 0 will make the maximum series
+  # count unlimited.
+  # max-select-series = 0
+
+  # The maximum number of group by time bucket a SELECT can create.  A value of zero will max the maximum
+  # number of buckets unlimited.
+  # max-select-buckets = 0
+
+###
+### [retention]
+###
+### Controls the enforcement of retention policies for evicting old data.
+###
+
+[retention]
+  # Determines whether retention policy enforcement enabled.
+  # enabled = true
+
+  # The interval of time when retention policy enforcement checks run.
+  # check-interval = "30m"
+
+###
+### [shard-precreation]
+###
+### Controls the precreation of shards, so they are available before data arrives.
+### Only shards that, after creation, will have both a start- and end-time in the
+### future, will ever be created. Shards are never precreated that would be wholly
+### or partially in the past.
+
+[shard-precreation]
+  # Determines whether shard pre-creation service is enabled.
+  # enabled = true
+
+  # The interval of time when the check to pre-create new shards runs.
+  # check-interval = "10m"
+
+  # The default period ahead of the endtime of a shard group that its successor
+  # group is created.
+  # advance-period = "30m"
+
+###
+### Controls the system self-monitoring, statistics and diagnostics.
+###
+### The internal database for monitoring data is created automatically if
+### if it does not already exist. The target retention within this database
+### is called 'monitor' and is also created with a retention period of 7 days
+### and a replication factor of 1, if it does not exist. In all cases the
+### this retention policy is configured as the default for the database.
+
+[monitor]
+  # Whether to record statistics internally.
+  # store-enabled = true
+
+  # The destination database for recorded statistics
+  # store-database = "_internal"
+
+  # The interval at which to record statistics
+  # store-interval = "10s"
+
+###
+### [http]
+###
+### Controls how the HTTP endpoints are configured. These are the primary
+### mechanism for getting data into and out of InfluxDB.
+###
+
+[http]
+  # Determines whether HTTP endpoint is enabled.
+  # enabled = true
+
+  # Determines whether the Flux query endpoint is enabled.
+  # flux-enabled = false
+
+  # Determines whether the Flux query logging is enabled.
+  # flux-log-enabled = false
+
+  # The bind address used by the HTTP service.
+  # bind-address = ":8086"
+
+  # Determines whether user authentication is enabled over HTTP/HTTPS.
+  # auth-enabled = false
+
+  # The default realm sent back when issuing a basic auth challenge.
+  # realm = "InfluxDB"
+
+  # Determines whether HTTP request logging is enabled.
+  # log-enabled = true
+
+  # Determines whether the HTTP write request logs should be suppressed when the log is enabled.
+  # suppress-write-log = false
+
+  # When HTTP request logging is enabled, this option specifies the path where
+  # log entries should be written. If unspecified, the default is to write to stderr, which
+  # intermingles HTTP logs with internal InfluxDB logging.
+  #
+  # If influxd is unable to access the specified path, it will log an error and fall back to writing
+  # the request log to stderr.
+  # access-log-path = ""
+
+  # Filters which requests should be logged. Each filter is of the pattern NNN, NNX, or NXX where N is
+  # a number and X is a wildcard for any number. To filter all 5xx responses, use the string 5xx.
+  # If multiple filters are used, then only one has to match. The default is to have no filters which
+  # will cause every request to be printed.
+  # access-log-status-filters = []
+
+  # Determines whether detailed write logging is enabled.
+  # write-tracing = false
+
+  # Determines whether the pprof endpoint is enabled.  This endpoint is used for
+  # troubleshooting and monitoring.
+  # pprof-enabled = true
+
+  # Enables authentication on pprof endpoints. Users will need admin permissions
+  # to access the pprof endpoints when this setting is enabled. This setting has
+  # no effect if either auth-enabled or pprof-enabled are set to false.
+  # pprof-auth-enabled = false
+
+  # Enables a pprof endpoint that binds to localhost:6060 immediately on startup.
+  # This is only needed to debug startup issues.
+  # debug-pprof-enabled = false
+
+  # Enables authentication on the /ping, /metrics, and deprecated /status
+  # endpoints. This setting has no effect if auth-enabled is set to false.
+  # ping-auth-enabled = false
+
+  # Determines whether HTTPS is enabled.
+  # https-enabled = false
+
+  # The SSL certificate to use when HTTPS is enabled.
+  # https-certificate = "/etc/ssl/influxdb.pem"
+
+  # Use a separate private key location.
+  # https-private-key = ""
+
+  # The JWT auth shared secret to validate requests using JSON web tokens.
+  # shared-secret = ""
+
+  # The default chunk size for result sets that should be chunked.
+  # max-row-limit = 0
+
+  # The maximum number of HTTP connections that may be open at once.  New connections that
+  # would exceed this limit are dropped.  Setting this value to 0 disables the limit.
+  # max-connection-limit = 0
+
+  # Enable http service over unix domain socket
+  # unix-socket-enabled = false
+
+  # The path of the unix domain socket.
+  # bind-socket = "/var/run/influxdb.sock"
+
+  # The maximum size of a client request body, in bytes. Setting this value to 0 disables the limit.
+  # max-body-size = 25000000
+
+  # The maximum number of writes processed concurrently.
+  # Setting this to 0 disables the limit.
+  # max-concurrent-write-limit = 0
+
+  # The maximum number of writes queued for processing.
+  # Setting this to 0 disables the limit.
+  # max-enqueued-write-limit = 0
+
+  # The maximum duration for a write to wait in the queue to be processed.
+  # Setting this to 0 or setting max-concurrent-write-limit to 0 disables the limit.
+  # enqueued-write-timeout = 0
+
+###
+### [logging]
+###
+### Controls how the logger emits logs to the output.
+###
+
+[logging]
+  # Determines which log encoder to use for logs. Available options
+  # are auto, logfmt, and json. auto will use a more a more user-friendly
+  # output format if the output terminal is a TTY, but the format is not as
+  # easily machine-readable. When the output is a non-TTY, auto will use
+  # logfmt.
+  # format = "auto"
+
+  # Determines which level of logs will be emitted. The available levels
+  # are error, warn, info, and debug. Logs that are equal to or above the
+  # specified level will be emitted.
+  # level = "info"
+
+  # Suppresses the logo output that is printed when the program is started.
+  # The logo is always suppressed if STDOUT is not a TTY.
+  # suppress-logo = false
+
+###
+### [subscriber]
+###
+### Controls the subscriptions, which can be used to fork a copy of all data
+### received by the InfluxDB host.
+###
+
+[subscriber]
+  # Determines whether the subscriber service is enabled.
+  # enabled = true
+
+  # The default timeout for HTTP writes to subscribers.
+  # http-timeout = "30s"
+
+  # Allows insecure HTTPS connections to subscribers.  This is useful when testing with self-
+  # signed certificates.
+  # insecure-skip-verify = false
+
+  # The path to the PEM encoded CA certs file. If the empty string, the default system certs will be used
+  # ca-certs = ""
+
+  # The number of writer goroutines processing the write channel.
+  # write-concurrency = 40
+
+  # The number of in-flight writes buffered in the write channel.
+  # write-buffer-size = 1000
+
+
+###
+### [[graphite]]
+###
+### Controls one or many listeners for Graphite data.
+###
+
+[[graphite]]
+  # Determines whether the graphite endpoint is enabled.
+  # enabled = false
+  # database = "graphite"
+  # retention-policy = ""
+  # bind-address = ":2003"
+  # protocol = "tcp"
+  # consistency-level = "one"
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # udp-read-buffer = 0
+
+  ### This string joins multiple matching 'measurement' values providing more control over the final measurement name.
+  # separator = "."
+
+  ### Default tags that will be added to all metrics.  These can be overridden at the template level
+  ### or by tags extracted from metric
+  # tags = ["region=us-east", "zone=1c"]
+
+  ### Each template line requires a template pattern.  It can have an optional
+  ### filter before the template and separated by spaces.  It can also have optional extra
+  ### tags following the template.  Multiple tags should be separated by commas and no spaces
+  ### similar to the line protocol format.  There can be only one default template.
+  # templates = [
+  #   "*.app env.service.resource.measurement",
+  #   # Default template
+  #   "server.*",
+  # ]
+
+###
+### [collectd]
+###
+### Controls one or many listeners for collectd data.
+###
+
+[[collectd]]
+  # enabled = false
+  # bind-address = ":25826"
+  # database = "collectd"
+  # retention-policy = ""
+  #
+  # The collectd service supports either scanning a directory for multiple types
+  # db files, or specifying a single db file.
+  # typesdb = "/usr/local/share/collectd"
+  #
+  # security-level = "none"
+  # auth-file = "/etc/collectd/auth_file"
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "10s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # read-buffer = 0
+
+  # Multi-value plugins can be handled two ways.
+  # "split" will parse and store the multi-value plugin data into separate measurements
+  # "join" will parse and store the multi-value plugin as a single multi-value measurement.
+  # "split" is the default behavior for backward compatibility with previous versions of influxdb.
+  # parse-multivalue-plugin = "split"
+###
+### [opentsdb]
+###
+### Controls one or many listeners for OpenTSDB data.
+###
+
+[[opentsdb]]
+  # enabled = false
+  # bind-address = ":4242"
+  # database = "opentsdb"
+  # retention-policy = ""
+  # consistency-level = "one"
+  # tls-enabled = false
+  # certificate= "/etc/ssl/influxdb.pem"
+
+  # Log an error for every malformed point.
+  # log-point-errors = true
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Only points
+  # metrics received over the telnet protocol undergo batching.
+
+  # Flush if this many points get buffered
+  # batch-size = 1000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 5
+
+  # Flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "1s"
+
+###
+### [[udp]]
+###
+### Controls the listeners for InfluxDB line protocol data via UDP.
+###
+
+[[udp]]
+  # enabled = false
+  # bind-address = ":8089"
+  # database = "udp"
+  # retention-policy = ""
+
+  # InfluxDB precision for timestamps on received points ("" or "n", "u", "ms", "s", "m", "h")
+  # precision = ""
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Will flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # read-buffer = 0
+
+###
+### [continuous_queries]
+###
+### Controls how continuous queries are run within InfluxDB.
+###
+
+[continuous_queries]
+  # Determines whether the continuous query service is enabled.
+  # enabled = true
+
+  # Controls whether queries are logged when executed by the CQ service.
+  # log-enabled = true
+
+  # Controls whether queries are logged to the self-monitoring data store.
+  # query-stats-enabled = false
+
+  # interval for how often continuous queries will be checked if they need to run
+  # run-interval = "1s"
+
+###
+### [tls]
+###
+### Global configuration settings for TLS in InfluxDB.
+###
+
+[tls]
+  # Determines the available set of cipher suites. See https://golang.org/pkg/crypto/tls/#pkg-constants
+  # for a list of available ciphers, which depends on the version of Go (use the query
+  # SHOW DIAGNOSTICS to see the version of Go used to build InfluxDB). If not specified, uses
+  # the default settings from Go's crypto/tls package.
+  # ciphers = [
+  #   "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305",
+  #   "TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305",
+  # ]
+
+  # Minimum version of the tls protocol that will be negotiated. If not specified, uses the
+  # default settings from Go's crypto/tls package.
+  # min-version = "tls1.2"
+
+  # Maximum version of the tls protocol that will be negotiated. If not specified, uses the
+  # default settings from Go's crypto/tls package.
+  # max-version = "tls1.3"
meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +63 -1
new file mode 100644
index 000000000..4f2bb78b2
@@ -0,0 +1,63 @@
+DESCRIPTION = "InfluxDB is a time series database designed to handle high write and query loads."
+HOMEPAGE = "https://www.influxdata.com/products/influxdb-overview/"
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://src/${GO_IMPORT}/LICENSE;md5=ba8146ad9cc2a128209983265136e06a"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+RDEPENDS_${PN} = "bash"
+RDEPENDS_${PN}-dev = "bash"
+
+GO_IMPORT = "github.com/influxdata/influxdb"
+
+GO_INSTALL = "\
+    ${GO_IMPORT}/cmd/influx \
+    ${GO_IMPORT}/cmd/influxd \
+"
+
+SRC_URI = "\
+    git://${GO_IMPORT};protocol=https;branch=1.7;destsuffix=${BPN}-${PV}/src/${GO_IMPORT} \
+    file://influxdb \
+    file://influxdb.conf \
+"
+
+SRCREV = "c958f436b2e538a88a7815aad721c7774a0b8f63"
+
+inherit go-mod systemd update-rc.d useradd
+
+USERADD_PACKAGES = "${PN}"
+USERADD_PARAM_${PN} = "--system -d /var/lib/influxdb -m -s /bin/nologin influxdb"
+
+do_install_prepend() {
+    rm ${B}/src/${GO_IMPORT}/build.py
+    rm ${B}/src/${GO_IMPORT}/build.sh
+    rm ${B}/src/${GO_IMPORT}/Dockerfile*
+}
+
+do_install_append() {
+    install -d ${D}${sysconfdir}/influxdb
+    install -m 0644 ${WORKDIR}/influxdb.conf ${D}${sysconfdir}/influxdb
+    chown -R root.influxdb ${D}${sysconfdir}/influxdb
+
+    install -d ${D}${sysconfdir}/init.d
+    install -m 0755 ${WORKDIR}/influxdb ${D}${sysconfdir}/init.d/influxdb
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'sysvinit', d)}" ] ; then
+        install -d ${D}${sysconfdir}/logrotate.d
+        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/logrotate ${D}${sysconfdir}/logrotate.d/influxdb
+    fi
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}" ] ; then
+        install -d ${D}${systemd_unitdir}/system
+        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/influxdb.service ${D}${systemd_system_unitdir}/influxdb.service
+    fi
+
+    # TODO chown
+}
+
+INITSCRIPT_PACKAGES = "${PN}"
+INITSCRIPT_NAME = "influxdb"
+INITSCRIPT_PARAMS = "defaults"
+
+SYSTEMD_SERVICE_${PN} = "influxdb.service"
--

2.29.2

#2 lore raw

also see
https://github.com/pkg/term/issues/49

Quoted 943 lines · Khem Raj

Hi Thomas

This fails on mips see
https://errors.yoctoproject.org/Errors/Details/540902/

# github.com/pkg/term/termios
../../../../pkg/mod/github.com/pkg/[email protected]/termios/termios_linux.go:78:61:
attr.Ispeed undefined (type *syscall.Termios has no field or method
Ispeed)
../../../../pkg/mod/github.com/pkg/[email protected]/termios/termios_linux.go:81:61:
attr.Ospeed undefined (type *syscall.Termios has no field or method
Ospeed)

I think these perhaps can be fixed in term package maybe just comment them out.

Thanks
-Khem

Quoted 922 lines · Thomas Perrot

InfluxDB is a time series database designed to handle high write and query loads.

---
 .../recipes-dbs/influxdb/influxdb/influxdb    | 235 +++++++
 .../influxdb/influxdb/influxdb.conf           | 586 ++++++++++++++++++
 .../recipes-dbs/influxdb/influxdb_1.7.10.bb   |  63 ++
 3 files changed, 884 insertions(+)
 create mode 100755 meta-oe/recipes-dbs/influxdb/influxdb/influxdb
 create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf
 create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb
meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +235 -0
new file mode 100755
index 000000000..ffb29c3ae
@@ -0,0 +1,235 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides:          influxd
+# Required-Start:    $all
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start the InfluxDB process
+### END INIT INFO
+set -x
+# If you modify this, please make sure to also edit influxdb.service
+
+# Command-line options that can be set in /etc/default/influxdb.  These will override
+# any config file values.
+DEFAULT=/etc/default/influxdb
+
+# Daemon options
+INFLUXD_OPTS=
+
+# Process name ( For display )
+NAME=influxdb
+
+# User and group
+USER=influxdb
+GROUP=influxdb
+
+# Check for sudo or root privileges before continuing
+if [ "$UID" != "0" ]; then
+    echo "You must be root to run this script"
+    exit 1
+fi
+
+# Daemon name, where is the actual executable If the daemon is not
+# there, then exit.
+DAEMON=/usr/bin/influxd
+if [ ! -x $DAEMON ]; then
+    echo "Executable $DAEMON does not exist!"
+    exit 5
+fi
+
+# Configuration file
+CONFIG=/etc/influxdb/influxdb.conf
+
+# PID file for the daemon
+PIDFILE=/var/run/influxdb/influxd.pid
+PIDDIR=`dirname $PIDFILE`
+if [ ! -d "$PIDDIR" ]; then
+    mkdir -p $PIDDIR
+    chown $USER:$GROUP $PIDDIR
+fi
+
+# Max open files
+OPEN_FILE_LIMIT=65536
+
+if [ -r /lib/lsb/init-functions ]; then
+    source /lib/lsb/init-functions
+fi
+
+# Logging
+if [ -z "$STDOUT" ]; then
+    STDOUT=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDOUT" ]; then
+    mkdir -p $(dirname $STDOUT)
+fi
+
+if [ -z "$STDERR" ]; then
+    STDERR=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDERR" ]; then
+    mkdir -p $(dirname $STDERR)
+fi
+
+# Override init script variables with DEFAULT values
+if [ -r $DEFAULT ]; then
+    source $DEFAULT
+fi
+
+function log_failure_msg() {
+    echo "$@" "[ FAILED ]"
+}
+
+function log_success_msg() {
+    echo "$@" "[ OK ]"
+}
+
+function start() {
+    # Check if config file exist
+    if [ ! -r $CONFIG ]; then
+        log_failure_msg "config file $CONFIG doesn't exist (or you don't have permission to view)"
+        exit 4
+    fi
+
+    # Check that the PID file exists, and check the actual status of process
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # Process is already up
+            log_success_msg "$NAME process is already running"
+            return 0
+        fi
+    else
+        su -s /bin/sh -c "touch $PIDFILE" $USER &>/dev/null
+        if [ $? -ne 0 ]; then
+            log_failure_msg "$PIDFILE not writable, check permissions"
+            exit 5
+        fi
+    fi
+
+    # Bump the file limits, before launching the daemon. These will
+    # carry over to launched processes.
+    ulimit -n $OPEN_FILE_LIMIT
+    if [ $? -ne 0 ]; then
+        log_failure_msg "Unable to set ulimit to $OPEN_FILE_LIMIT"
+        exit 1
+    fi
+
+    # Launch process
+    echo "Starting $NAME..."
+    if command -v start-stop-daemon &>/dev/null; then
+        start-stop-daemon \
+            --background \
+            --chuid $USER:$GROUP \
+            --start \
+            --quiet \
+            --pidfile $PIDFILE \
+            --exec $DAEMON \
+            -- \
+            -config $CONFIG \
+            $INFLUXD_OPTS >>$STDOUT 2>>$STDERR
+    else
+        local CMD="$DAEMON -config $CONFIG $INFLUXD_OPTS >>$STDOUT 2>>$STDERR &"
+        su -s /bin/sh -c "$CMD" $USER
+    fi
+
+    # Sleep to verify process is still up
+    sleep 1
+    echo $(pidof influxd) > $PIDFILE
+    if [ -f $PIDFILE ]; then
+        # PIDFILE exists
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # PID up, service running
+            log_success_msg "$NAME process was started"
+            return 0
+        fi
+    fi
+    log_failure_msg "$NAME process was unable to start"
+    exit 1
+}
+
+function stop() {
+    # Stop the daemon.
+    if [ -f $PIDFILE ]; then
+        local PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            echo "Stopping $NAME..."
+            # Process still up, send SIGTERM and remove PIDFILE
+            kill -s TERM $PID &>/dev/null && rm -f "$PIDFILE" &>/dev/null
+            n=0
+            while true; do
+                # Enter loop to ensure process is stopped
+                kill -0 $PID &>/dev/null
+                if [ "$?" != "0" ]; then
+                    # Process stopped, break from loop
+                    log_success_msg "$NAME process was stopped"
+                    return 0
+                fi
+
+                # Process still up after signal, sleep and wait
+                sleep 1
+                n=$(expr $n + 1)
+                if [ $n -eq 30 ]; then
+                    # After 30 seconds, send SIGKILL
+                    echo "Timeout exceeded, sending SIGKILL..."
+                    kill -s KILL $PID &>/dev/null
+                elif [ $? -eq 40 ]; then
+                    # After 40 seconds, error out
+                    log_failure_msg "could not stop $NAME process"
+                    exit 1
+                fi
+            done
+        fi
+    fi
+    log_success_msg "$NAME process already stopped"
+}
+
+function restart() {
+    # Restart the daemon.
+    stop
+    start
+}
+
+function status() {
+    # Check the status of the process.
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            log_success_msg "$NAME process is running"
+            exit 0
+        fi
+    fi
+    log_failure_msg "$NAME process is not running"
+    exit 1
+}
+
+case $1 in
+    start)
+        start
+        ;;
+
+    stop)
+        stop
+        ;;
+
+    restart)
+        restart
+        ;;
+
+    status)
+        status
+        ;;
+
+    version)
+        $DAEMON version
+        ;;
+
+    *)
+        # For invalid arguments, print the usage message.
+        echo "Usage: $0 {start|stop|restart|status|version}"
+        exit 2
+        ;;
+esac
meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +586 -0
new file mode 100644
index 000000000..21c0926f2
@@ -0,0 +1,586 @@
+### Welcome to the InfluxDB configuration file.
+
+# The values in this file override the default values used by the system if
+# a config option is not specified. The commented out lines are the configuration
+# field and the default value used. Uncommenting a line and changing the value
+# will change the value used at runtime when the process is restarted.
+
+# Once every 24 hours InfluxDB will report usage data to usage.influxdata.com
+# The data includes a random ID, os, arch, version, the number of series and other
+# usage data. No data from user databases is ever transmitted.
+# Change this option to true to disable reporting.
+# reporting-disabled = false
+
+# Bind address to use for the RPC service for backup and restore.
+# bind-address = "127.0.0.1:8088"
+
+###
+### [meta]
+###
+### Controls the parameters for the Raft consensus group that stores metadata
+### about the InfluxDB cluster.
+###
+
+[meta]
+  # Where the metadata/raft database is stored
+  dir = "/var/lib/influxdb/meta"
+
+  # Automatically create a default retention policy when creating a database.
+  # retention-autocreate = true
+
+  # If log messages are printed for the meta service
+  # logging-enabled = true
+
+###
+### [data]
+###
+### Controls where the actual shard data for InfluxDB lives and how it is
+### flushed from the WAL. "dir" may need to be changed to a suitable place
+### for your system, but the WAL settings are an advanced configuration. The
+### defaults should work for most systems.
+###
+
+[data]
+  # The directory where the TSM storage engine stores TSM files.
+  dir = "/var/lib/influxdb/data"
+
+  # The directory where the TSM storage engine stores WAL files.
+  wal-dir = "/var/lib/influxdb/wal"
+
+  # The amount of time that a write will wait before fsyncing.  A duration
+  # greater than 0 can be used to batch up multiple fsync calls.  This is useful for slower
+  # disks or when WAL write contention is seen.  A value of 0s fsyncs every write to the WAL.
+  # Values in the range of 0-100ms are recommended for non-SSD disks.
+  # wal-fsync-delay = "0s"
+
+
+  # The type of shard index to use for new shards.  The default is an in-memory index that is
+  # recreated at startup.  A value of "tsi1" will use a disk based index that supports higher
+  # cardinality datasets.
+  # index-version = "inmem"
+
+  # Trace logging provides more verbose output around the tsm engine. Turning
+  # this on can provide more useful output for debugging tsm engine issues.
+  # trace-logging-enabled = false
+
+  # Whether queries should be logged before execution. Very useful for troubleshooting, but will
+  # log any sensitive data contained within a query.
+  # query-log-enabled = true
+
+  # Validates incoming writes to ensure keys only have valid unicode characters.
+  # This setting will incur a small overhead because every key must be checked.
+  # validate-keys = false
+
+  # Settings for the TSM engine
+
+  # CacheMaxMemorySize is the maximum size a shard's cache can
+  # reach before it starts rejecting writes.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # cache-max-memory-size = "1g"
+
+  # CacheSnapshotMemorySize is the size at which the engine will
+  # snapshot the cache and write it to a TSM file, freeing up memory
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # cache-snapshot-memory-size = "25m"
+
+  # CacheSnapshotWriteColdDuration is the length of time at
+  # which the engine will snapshot the cache and write it to
+  # a new TSM file if the shard hasn't received writes or deletes
+  # cache-snapshot-write-cold-duration = "10m"
+
+  # CompactFullWriteColdDuration is the duration at which the engine
+  # will compact all TSM files in a shard if it hasn't received a
+  # write or delete
+  # compact-full-write-cold-duration = "4h"
+
+  # The maximum number of concurrent full and level compactions that can run at one time.  A
+  # value of 0 results in 50% of runtime.GOMAXPROCS(0) used at runtime.  Any number greater
+  # than 0 limits compactions to that value.  This setting does not apply
+  # to cache snapshotting.
+  # max-concurrent-compactions = 0
+
+  # CompactThroughput is the rate limit in bytes per second that we
+  # will allow TSM compactions to write to disk. Note that short bursts are allowed
+  # to happen at a possibly larger value, set by CompactThroughputBurst
+  # compact-throughput = "48m"
+
+  # CompactThroughputBurst is the rate limit in bytes per second that we
+  # will allow TSM compactions to write to disk.
+  # compact-throughput-burst = "48m"
+
+  # If true, then the mmap advise value MADV_WILLNEED will be provided to the kernel with respect to
+  # TSM files. This setting has been found to be problematic on some kernels, and defaults to off.
+  # It might help users who have slow disks in some cases.
+  # tsm-use-madv-willneed = false
+
+  # Settings for the inmem index
+
+  # The maximum series allowed per database before writes are dropped.  This limit can prevent
+  # high cardinality issues at the database level.  This limit can be disabled by setting it to
+  # 0.
+  # max-series-per-database = 1000000
+
+  # The maximum number of tag values per tag that are allowed before writes are dropped.  This limit
+  # can prevent high cardinality tag values from being written to a measurement.  This limit can be
+  # disabled by setting it to 0.
+  # max-values-per-tag = 100000
+
+  # Settings for the tsi1 index
+
+  # The threshold, in bytes, when an index write-ahead log file will compact
+  # into an index file. Lower sizes will cause log files to be compacted more
+  # quickly and result in lower heap usage at the expense of write throughput.
+  # Higher sizes will be compacted less frequently, store more series in-memory,
+  # and provide higher write throughput.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # max-index-log-file-size = "1m"
+
+  # The size of the internal cache used in the TSI index to store previously
+  # calculated series results. Cached results will be returned quickly from the cache rather
+  # than needing to be recalculated when a subsequent query with a matching tag key/value
+  # predicate is executed. Setting this value to 0 will disable the cache, which may
+  # lead to query performance issues.
+  # This value should only be increased if it is known that the set of regularly used
+  # tag key/value predicates across all measurements for a database is larger than 100. An
+  # increase in cache size may lead to an increase in heap usage.
+  series-id-set-cache-size = 100
+
+###
+### [coordinator]
+###
+### Controls the clustering service configuration.
+###
+
+[coordinator]
+  # The default time a write request will wait until a "timeout" error is returned to the caller.
+  # write-timeout = "10s"
+
+  # The maximum number of concurrent queries allowed to be executing at one time.  If a query is
+  # executed and exceeds this limit, an error is returned to the caller.  This limit can be disabled
+  # by setting it to 0.
+  # max-concurrent-queries = 0
+
+  # The maximum time a query will is allowed to execute before being killed by the system.  This limit
+  # can help prevent run away queries.  Setting the value to 0 disables the limit.
+  # query-timeout = "0s"
+
+  # The time threshold when a query will be logged as a slow query.  This limit can be set to help
+  # discover slow or resource intensive queries.  Setting the value to 0 disables the slow query logging.
+  # log-queries-after = "0s"
+
+  # The maximum number of points a SELECT can process.  A value of 0 will make
+  # the maximum point count unlimited.  This will only be checked every second so queries will not
+  # be aborted immediately when hitting the limit.
+  # max-select-point = 0
+
+  # The maximum number of series a SELECT can run.  A value of 0 will make the maximum series
+  # count unlimited.
+  # max-select-series = 0
+
+  # The maximum number of group by time bucket a SELECT can create.  A value of zero will max the maximum
+  # number of buckets unlimited.
+  # max-select-buckets = 0
+
+###
+### [retention]
+###
+### Controls the enforcement of retention policies for evicting old data.
+###
+
+[retention]
+  # Determines whether retention policy enforcement enabled.
+  # enabled = true
+
+  # The interval of time when retention policy enforcement checks run.
+  # check-interval = "30m"
+
+###
+### [shard-precreation]
+###
+### Controls the precreation of shards, so they are available before data arrives.
+### Only shards that, after creation, will have both a start- and end-time in the
+### future, will ever be created. Shards are never precreated that would be wholly
+### or partially in the past.
+
+[shard-precreation]
+  # Determines whether shard pre-creation service is enabled.
+  # enabled = true
+
+  # The interval of time when the check to pre-create new shards runs.
+  # check-interval = "10m"
+
+  # The default period ahead of the endtime of a shard group that its successor
+  # group is created.
+  # advance-period = "30m"
+
+###
+### Controls the system self-monitoring, statistics and diagnostics.
+###
+### The internal database for monitoring data is created automatically if
+### if it does not already exist. The target retention within this database
+### is called 'monitor' and is also created with a retention period of 7 days
+### and a replication factor of 1, if it does not exist. In all cases the
+### this retention policy is configured as the default for the database.
+
+[monitor]
+  # Whether to record statistics internally.
+  # store-enabled = true
+
+  # The destination database for recorded statistics
+  # store-database = "_internal"
+
+  # The interval at which to record statistics
+  # store-interval = "10s"
+
+###
+### [http]
+###
+### Controls how the HTTP endpoints are configured. These are the primary
+### mechanism for getting data into and out of InfluxDB.
+###
+
+[http]
+  # Determines whether HTTP endpoint is enabled.
+  # enabled = true
+
+  # Determines whether the Flux query endpoint is enabled.
+  # flux-enabled = false
+
+  # Determines whether the Flux query logging is enabled.
+  # flux-log-enabled = false
+
+  # The bind address used by the HTTP service.
+  # bind-address = ":8086"
+
+  # Determines whether user authentication is enabled over HTTP/HTTPS.
+  # auth-enabled = false
+
+  # The default realm sent back when issuing a basic auth challenge.
+  # realm = "InfluxDB"
+
+  # Determines whether HTTP request logging is enabled.
+  # log-enabled = true
+
+  # Determines whether the HTTP write request logs should be suppressed when the log is enabled.
+  # suppress-write-log = false
+
+  # When HTTP request logging is enabled, this option specifies the path where
+  # log entries should be written. If unspecified, the default is to write to stderr, which
+  # intermingles HTTP logs with internal InfluxDB logging.
+  #
+  # If influxd is unable to access the specified path, it will log an error and fall back to writing
+  # the request log to stderr.
+  # access-log-path = ""
+
+  # Filters which requests should be logged. Each filter is of the pattern NNN, NNX, or NXX where N is
+  # a number and X is a wildcard for any number. To filter all 5xx responses, use the string 5xx.
+  # If multiple filters are used, then only one has to match. The default is to have no filters which
+  # will cause every request to be printed.
+  # access-log-status-filters = []
+
+  # Determines whether detailed write logging is enabled.
+  # write-tracing = false
+
+  # Determines whether the pprof endpoint is enabled.  This endpoint is used for
+  # troubleshooting and monitoring.
+  # pprof-enabled = true
+
+  # Enables authentication on pprof endpoints. Users will need admin permissions
+  # to access the pprof endpoints when this setting is enabled. This setting has
+  # no effect if either auth-enabled or pprof-enabled are set to false.
+  # pprof-auth-enabled = false
+
+  # Enables a pprof endpoint that binds to localhost:6060 immediately on startup.
+  # This is only needed to debug startup issues.
+  # debug-pprof-enabled = false
+
+  # Enables authentication on the /ping, /metrics, and deprecated /status
+  # endpoints. This setting has no effect if auth-enabled is set to false.
+  # ping-auth-enabled = false
+
+  # Determines whether HTTPS is enabled.
+  # https-enabled = false
+
+  # The SSL certificate to use when HTTPS is enabled.
+  # https-certificate = "/etc/ssl/influxdb.pem"
+
+  # Use a separate private key location.
+  # https-private-key = ""
+
+  # The JWT auth shared secret to validate requests using JSON web tokens.
+  # shared-secret = ""
+
+  # The default chunk size for result sets that should be chunked.
+  # max-row-limit = 0
+
+  # The maximum number of HTTP connections that may be open at once.  New connections that
+  # would exceed this limit are dropped.  Setting this value to 0 disables the limit.
+  # max-connection-limit = 0
+
+  # Enable http service over unix domain socket
+  # unix-socket-enabled = false
+
+  # The path of the unix domain socket.
+  # bind-socket = "/var/run/influxdb.sock"
+
+  # The maximum size of a client request body, in bytes. Setting this value to 0 disables the limit.
+  # max-body-size = 25000000
+
+  # The maximum number of writes processed concurrently.
+  # Setting this to 0 disables the limit.
+  # max-concurrent-write-limit = 0
+
+  # The maximum number of writes queued for processing.
+  # Setting this to 0 disables the limit.
+  # max-enqueued-write-limit = 0
+
+  # The maximum duration for a write to wait in the queue to be processed.
+  # Setting this to 0 or setting max-concurrent-write-limit to 0 disables the limit.
+  # enqueued-write-timeout = 0
+
+###
+### [logging]
+###
+### Controls how the logger emits logs to the output.
+###
+
+[logging]
+  # Determines which log encoder to use for logs. Available options
+  # are auto, logfmt, and json. auto will use a more a more user-friendly
+  # output format if the output terminal is a TTY, but the format is not as
+  # easily machine-readable. When the output is a non-TTY, auto will use
+  # logfmt.
+  # format = "auto"
+
+  # Determines which level of logs will be emitted. The available levels
+  # are error, warn, info, and debug. Logs that are equal to or above the
+  # specified level will be emitted.
+  # level = "info"
+
+  # Suppresses the logo output that is printed when the program is started.
+  # The logo is always suppressed if STDOUT is not a TTY.
+  # suppress-logo = false
+
+###
+### [subscriber]
+###
+### Controls the subscriptions, which can be used to fork a copy of all data
+### received by the InfluxDB host.
+###
+
+[subscriber]
+  # Determines whether the subscriber service is enabled.
+  # enabled = true
+
+  # The default timeout for HTTP writes to subscribers.
+  # http-timeout = "30s"
+
+  # Allows insecure HTTPS connections to subscribers.  This is useful when testing with self-
+  # signed certificates.
+  # insecure-skip-verify = false
+
+  # The path to the PEM encoded CA certs file. If the empty string, the default system certs will be used
+  # ca-certs = ""
+
+  # The number of writer goroutines processing the write channel.
+  # write-concurrency = 40
+
+  # The number of in-flight writes buffered in the write channel.
+  # write-buffer-size = 1000
+
+
+###
+### [[graphite]]
+###
+### Controls one or many listeners for Graphite data.
+###
+
+[[graphite]]
+  # Determines whether the graphite endpoint is enabled.
+  # enabled = false
+  # database = "graphite"
+  # retention-policy = ""
+  # bind-address = ":2003"
+  # protocol = "tcp"
+  # consistency-level = "one"
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # udp-read-buffer = 0
+
+  ### This string joins multiple matching 'measurement' values providing more control over the final measurement name.
+  # separator = "."
+
+  ### Default tags that will be added to all metrics.  These can be overridden at the template level
+  ### or by tags extracted from metric
+  # tags = ["region=us-east", "zone=1c"]
+
+  ### Each template line requires a template pattern.  It can have an optional
+  ### filter before the template and separated by spaces.  It can also have optional extra
+  ### tags following the template.  Multiple tags should be separated by commas and no spaces
+  ### similar to the line protocol format.  There can be only one default template.
+  # templates = [
+  #   "*.app env.service.resource.measurement",
+  #   # Default template
+  #   "server.*",
+  # ]
+
+###
+### [collectd]
+###
+### Controls one or many listeners for collectd data.
+###
+
+[[collectd]]
+  # enabled = false
+  # bind-address = ":25826"
+  # database = "collectd"
+  # retention-policy = ""
+  #
+  # The collectd service supports either scanning a directory for multiple types
+  # db files, or specifying a single db file.
+  # typesdb = "/usr/local/share/collectd"
+  #
+  # security-level = "none"
+  # auth-file = "/etc/collectd/auth_file"
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "10s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # read-buffer = 0
+
+  # Multi-value plugins can be handled two ways.
+  # "split" will parse and store the multi-value plugin data into separate measurements
+  # "join" will parse and store the multi-value plugin as a single multi-value measurement.
+  # "split" is the default behavior for backward compatibility with previous versions of influxdb.
+  # parse-multivalue-plugin = "split"
+###
+### [opentsdb]
+###
+### Controls one or many listeners for OpenTSDB data.
+###
+
+[[opentsdb]]
+  # enabled = false
+  # bind-address = ":4242"
+  # database = "opentsdb"
+  # retention-policy = ""
+  # consistency-level = "one"
+  # tls-enabled = false
+  # certificate= "/etc/ssl/influxdb.pem"
+
+  # Log an error for every malformed point.
+  # log-point-errors = true
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Only points
+  # metrics received over the telnet protocol undergo batching.
+
+  # Flush if this many points get buffered
+  # batch-size = 1000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 5
+
+  # Flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "1s"
+
+###
+### [[udp]]
+###
+### Controls the listeners for InfluxDB line protocol data via UDP.
+###
+
+[[udp]]
+  # enabled = false
+  # bind-address = ":8089"
+  # database = "udp"
+  # retention-policy = ""
+
+  # InfluxDB precision for timestamps on received points ("" or "n", "u", "ms", "s", "m", "h")
+  # precision = ""
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Will flush at least this often even if we haven't hit buffer limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # read-buffer = 0
+
+###
+### [continuous_queries]
+###
+### Controls how continuous queries are run within InfluxDB.
+###
+
+[continuous_queries]
+  # Determines whether the continuous query service is enabled.
+  # enabled = true
+
+  # Controls whether queries are logged when executed by the CQ service.
+  # log-enabled = true
+
+  # Controls whether queries are logged to the self-monitoring data store.
+  # query-stats-enabled = false
+
+  # interval for how often continuous queries will be checked if they need to run
+  # run-interval = "1s"
+
+###
+### [tls]
+###
+### Global configuration settings for TLS in InfluxDB.
+###
+
+[tls]
+  # Determines the available set of cipher suites. See https://golang.org/pkg/crypto/tls/#pkg-constants
+  # for a list of available ciphers, which depends on the version of Go (use the query
+  # SHOW DIAGNOSTICS to see the version of Go used to build InfluxDB). If not specified, uses
+  # the default settings from Go's crypto/tls package.
+  # ciphers = [
+  #   "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305",
+  #   "TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305",
+  # ]
+
+  # Minimum version of the tls protocol that will be negotiated. If not specified, uses the
+  # default settings from Go's crypto/tls package.
+  # min-version = "tls1.2"
+
+  # Maximum version of the tls protocol that will be negotiated. If not specified, uses the
+  # default settings from Go's crypto/tls package.
+  # max-version = "tls1.3"
meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +63 -1
new file mode 100644
index 000000000..4f2bb78b2
@@ -0,0 +1,63 @@
+DESCRIPTION = "InfluxDB is a time series database designed to handle high write and query loads."
+HOMEPAGE = "https://www.influxdata.com/products/influxdb-overview/"
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://src/${GO_IMPORT}/LICENSE;md5=ba8146ad9cc2a128209983265136e06a"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+RDEPENDS_${PN} = "bash"
+RDEPENDS_${PN}-dev = "bash"
+
+GO_IMPORT = "github.com/influxdata/influxdb"
+
+GO_INSTALL = "\
+    ${GO_IMPORT}/cmd/influx \
+    ${GO_IMPORT}/cmd/influxd \
+"
+
+SRC_URI = "\
+    git://${GO_IMPORT};protocol=https;branch=1.7;destsuffix=${BPN}-${PV}/src/${GO_IMPORT} \
+    file://influxdb \
+    file://influxdb.conf \
+"
+
+SRCREV = "c958f436b2e538a88a7815aad721c7774a0b8f63"
+
+inherit go-mod systemd update-rc.d useradd
+
+USERADD_PACKAGES = "${PN}"
+USERADD_PARAM_${PN} = "--system -d /var/lib/influxdb -m -s /bin/nologin influxdb"
+
+do_install_prepend() {
+    rm ${B}/src/${GO_IMPORT}/build.py
+    rm ${B}/src/${GO_IMPORT}/build.sh
+    rm ${B}/src/${GO_IMPORT}/Dockerfile*
+}
+
+do_install_append() {
+    install -d ${D}${sysconfdir}/influxdb
+    install -m 0644 ${WORKDIR}/influxdb.conf ${D}${sysconfdir}/influxdb
+    chown -R root.influxdb ${D}${sysconfdir}/influxdb
+
+    install -d ${D}${sysconfdir}/init.d
+    install -m 0755 ${WORKDIR}/influxdb ${D}${sysconfdir}/init.d/influxdb
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'sysvinit', d)}" ] ; then
+        install -d ${D}${sysconfdir}/logrotate.d
+        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/logrotate ${D}${sysconfdir}/logrotate.d/influxdb
+    fi
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}" ] ; then
+        install -d ${D}${systemd_unitdir}/system
+        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/influxdb.service ${D}${systemd_system_unitdir}/influxdb.service
+    fi
+
+    # TODO chown
+}
+
+INITSCRIPT_PACKAGES = "${PN}"
+INITSCRIPT_NAME = "influxdb"
+INITSCRIPT_PARAMS = "defaults"
+
+SYSTEMD_SERVICE_${PN} = "influxdb.service"
--

2.29.2

#3 lore raw

Hello Khem,

Quoted 3 lines · Khem Raj

also see
https://github.com/pkg/term/issues/49

Thanks, I saw you submitted a patch fixing this build issue. Do you need me to have a hand in on another point?

Best regards,
Thomas

Quoted 1,133 lines · Khem Raj
Quoted 1,129 lines

Hi Thomas

This fails on mips see
https://errors.yoctoproject.org/Errors/Details/540902/

# github.com/pkg/term/termios
../../../../pkg/mod/github.com/pkg/[email protected]
/termios/termios_linux.go:78:61:
attr.Ispeed undefined (type *syscall.Termios has no field or method
Ispeed)
../../../../pkg/mod/github.com/pkg/[email protected]
/termios/termios_linux.go:81:61:
attr.Ospeed undefined (type *syscall.Termios has no field or method
Ospeed)

I think these perhaps can be fixed in term package maybe just comment them out.

Thanks
-Khem

Quoted 1,104 lines · Thomas Perrot

InfluxDB is a time series database designed to handle high write and query
loads.

---
 .../recipes-dbs/influxdb/influxdb/influxdb    | 235 +++++++ .../influxdb/influxdb/influxdb.conf           | 586
++++++++++++++++++
 .../recipes-dbs/influxdb/influxdb_1.7.10.bb   |  63 ++

 3 files changed, 884 insertions(+)

 create mode 100755 meta-oe/recipes-
dbs/influxdb/influxdb/influxdb
 create mode 100644 meta-oe/recipes-
dbs/influxdb/influxdb/influxdb.conf
 create mode 100644 meta-oe/recipes-
dbs/influxdb/influxdb_1.7.10.bb

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +11 -0
new file mode 100755
index 000000000..ffb29c3ae
@@ -0,0 +1,235 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides:          influxd
+# Required-Start:    $all
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start the InfluxDB process
+### END INIT INFO
+set -x
+# If you modify this, please make sure to also edit

influxdb.service

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +2 -0
+
+# Command-line options that can be set in

/etc/default/influxdb.  These will override

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +20 -0
+# any config file values.
+DEFAULT=/etc/default/influxdb
+
+# Daemon options
+INFLUXD_OPTS=
+
+# Process name ( For display )
+NAME=influxdb
+
+# User and group
+USER=influxdb
+GROUP=influxdb
+
+# Check for sudo or root privileges before continuing
+if [ "$UID" != "0" ]; then
+    echo "You must be root to run this script"
+    exit 1
+fi
+
+# Daemon name, where is the actual executable If the daemon is

not

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +59 -0
+# there, then exit.
+DAEMON=/usr/bin/influxd
+if [ ! -x $DAEMON ]; then
+    echo "Executable $DAEMON does not exist!"
+    exit 5
+fi
+
+# Configuration file
+CONFIG=/etc/influxdb/influxdb.conf
+
+# PID file for the daemon
+PIDFILE=/var/run/influxdb/influxd.pid
+PIDDIR=`dirname $PIDFILE`
+if [ ! -d "$PIDDIR" ]; then
+    mkdir -p $PIDDIR
+    chown $USER:$GROUP $PIDDIR
+fi
+
+# Max open files
+OPEN_FILE_LIMIT=65536
+
+if [ -r /lib/lsb/init-functions ]; then
+    source /lib/lsb/init-functions
+fi
+
+# Logging
+if [ -z "$STDOUT" ]; then
+    STDOUT=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDOUT" ]; then
+    mkdir -p $(dirname $STDOUT)
+fi
+
+if [ -z "$STDERR" ]; then
+    STDERR=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDERR" ]; then
+    mkdir -p $(dirname $STDERR)
+fi
+
+# Override init script variables with DEFAULT values
+if [ -r $DEFAULT ]; then
+    source $DEFAULT
+fi
+
+function log_failure_msg() {
+    echo "$@" "[ FAILED ]"
+}
+
+function log_success_msg() {
+    echo "$@" "[ OK ]"
+}
+
+function start() {
+    # Check if config file exist
+    if [ ! -r $CONFIG ]; then
+        log_failure_msg "config file $CONFIG doesn't exist (or

you don't have permission to view)"
+        exit 4
+    fi
+
+    # Check that the PID file exists, and check the actual status of process
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # Process is already up
+            log_success_msg "$NAME process is already running" +            return 0
+        fi
+    else
+        su -s /bin/sh -c "touch $PIDFILE" $USER &>/dev/null +        if [ $? -ne 0 ]; then
+            log_failure_msg "$PIDFILE not writable, check permissions"
+            exit 5
+        fi
+    fi
+
+    # Bump the file limits, before launching the daemon. These will
+    # carry over to launched processes.
+    ulimit -n $OPEN_FILE_LIMIT
+    if [ $? -ne 0 ]; then
+        log_failure_msg "Unable to set ulimit to $OPEN_FILE_LIMIT"
+        exit 1
+    fi
+
+    # Launch process
+    echo "Starting $NAME..."
+    if command -v start-stop-daemon &>/dev/null; then +        start-stop-daemon \
+            --background \
+            --chuid $USER:$GROUP \
+            --start \
+            --quiet \
+            --pidfile $PIDFILE \
+            --exec $DAEMON \
+            -- \
+            -config $CONFIG \
+            $INFLUXD_OPTS >>$STDOUT 2>>$STDERR
+    else
+        local CMD="$DAEMON -config $CONFIG $INFLUXD_OPTS

Quoted 1 line
Quoted 1 line

$STDOUT 2>>$STDERR &"

+        su -s /bin/sh -c "$CMD" $USER
+    fi

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +25 -0
+
+    # Sleep to verify process is still up
+    sleep 1
+    echo $(pidof influxd) > $PIDFILE
+    if [ -f $PIDFILE ]; then
+        # PIDFILE exists
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # PID up, service running
+            log_success_msg "$NAME process was started"
+            return 0
+        fi
+    fi
+    log_failure_msg "$NAME process was unable to start"
+    exit 1
+}
+
+function stop() {
+    # Stop the daemon.
+    if [ -f $PIDFILE ]; then
+        local PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            echo "Stopping $NAME..."
+            # Process still up, send SIGTERM and remove PIDFILE
+            kill -s TERM $PID &>/dev/null && rm -f "$PIDFILE"

&>/dev/null
+            n=0
+            while true; do
+                # Enter loop to ensure process is stopped +                kill -0 $PID &>/dev/null
+                if [ "$?" != "0" ]; then
+                    # Process stopped, break from loop +                    log_success_msg "$NAME process was stopped" +                    return 0
+                fi
+
+                # Process still up after signal, sleep and wait +                sleep 1
+                n=$(expr $n + 1)
+                if [ $n -eq 30 ]; then
+                    # After 30 seconds, send SIGKILL +                    echo "Timeout exceeded, sending SIGKILL..." +                    kill -s KILL $PID &>/dev/null
+                elif [ $? -eq 40 ]; then
+                    # After 40 seconds, error out
+                    log_failure_msg "could not stop $NAME process"
+                    exit 1
+                fi
+            done
+        fi
+    fi
+    log_success_msg "$NAME process already stopped"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +48 -0
+}
+
+function restart() {
+    # Restart the daemon.
+    stop
+    start
+}
+
+function status() {
+    # Check the status of the process.
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            log_success_msg "$NAME process is running"
+            exit 0
+        fi
+    fi
+    log_failure_msg "$NAME process is not running"
+    exit 1
+}
+
+case $1 in
+    start)
+        start
+        ;;
+
+    stop)
+        stop
+        ;;
+
+    restart)
+        restart
+        ;;
+
+    status)
+        status
+        ;;
+
+    version)
+        $DAEMON version
+        ;;
+
+    *)
+        # For invalid arguments, print the usage message.
+        echo "Usage: $0 {start|stop|restart|status|version}"
+        exit 2
+        ;;
+esac
meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
new file mode 100644
index 000000000..21c0926f2
@@ -0,0 +1,586 @@
+### Welcome to the InfluxDB configuration file.
+
+# The values in this file override the default values used by

the system if
+# a config option is not specified. The commented out lines are the configuration
+# field and the default value used. Uncommenting a line and changing the value
+# will change the value used at runtime when the process is restarted.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+
+# Once every 24 hours InfluxDB will report usage data to

usage.influxdata.com
+# The data includes a random ID, os, arch, version, the number of series and other

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+# usage data. No data from user databases is ever transmitted.
+# Change this option to true to disable reporting.
+# reporting-disabled = false
+
+# Bind address to use for the RPC service for backup and

restore.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+# bind-address = "127.0.0.1:8088"
+
+###
+### [meta]
+###
+### Controls the parameters for the Raft consensus group that

stores metadata

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+### about the InfluxDB cluster.
+###
+
+[meta]
+  # Where the metadata/raft database is stored
+  dir = "/var/lib/influxdb/meta"
+
+  # Automatically create a default retention policy when

creating a database.
+  # retention-autocreate = true

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # If log messages are printed for the meta service
+  # logging-enabled = true
+
+###
+### [data]
+###
+### Controls where the actual shard data for InfluxDB lives and

how it is
+### flushed from the WAL. "dir" may need to be changed to a suitable place
+### for your system, but the WAL settings are an advanced configuration. The

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+### defaults should work for most systems.
+###
+
+[data]
+  # The directory where the TSM storage engine stores TSM files.
+  dir = "/var/lib/influxdb/data"
+
+  # The directory where the TSM storage engine stores WAL files.
+  wal-dir = "/var/lib/influxdb/wal"
+
+  # The amount of time that a write will wait before fsyncing. 

A duration
+  # greater than 0 can be used to batch up multiple fsync calls.  This is useful for slower
+  # disks or when WAL write contention is seen.  A value of 0s fsyncs every write to the WAL.
+  # Values in the range of 0-100ms are recommended for non-SSD disks.
+  # wal-fsync-delay = "0s"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+
+
+  # The type of shard index to use for new shards.  The default

is an in-memory index that is
+  # recreated at startup.  A value of "tsi1" will use a disk based index that supports higher
+  # cardinality datasets.
+  # index-version = "inmem"
+
+  # Trace logging provides more verbose output around the tsm engine. Turning
+  # this on can provide more useful output for debugging tsm engine issues.
+  # trace-logging-enabled = false
+
+  # Whether queries should be logged before execution. Very useful for troubleshooting, but will
+  # log any sensitive data contained within a query. +  # query-log-enabled = true
+
+  # Validates incoming writes to ensure keys only have valid unicode characters.
+  # This setting will incur a small overhead because every key must be checked.
+  # validate-keys = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+
+  # Settings for the TSM engine
+
+  # CacheMaxMemorySize is the maximum size a shard's cache can
+  # reach before it starts rejecting writes.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 =

1k).
+  # Values without a size suffix are in bytes.
+  # cache-max-memory-size = "1g"
+
+  # CacheSnapshotMemorySize is the size at which the engine will +  # snapshot the cache and write it to a TSM file, freeing up memory
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # cache-snapshot-memory-size = "25m"
+
+  # CacheSnapshotWriteColdDuration is the length of time at +  # which the engine will snapshot the cache and write it to +  # a new TSM file if the shard hasn't received writes or deletes
+  # cache-snapshot-write-cold-duration = "10m"
+
+  # CompactFullWriteColdDuration is the duration at which the engine
+  # will compact all TSM files in a shard if it hasn't received a
+  # write or delete
+  # compact-full-write-cold-duration = "4h"
+
+  # The maximum number of concurrent full and level compactions that can run at one time.  A
+  # value of 0 results in 50% of runtime.GOMAXPROCS(0) used at runtime.  Any number greater
+  # than 0 limits compactions to that value.  This setting does not apply
+  # to cache snapshotting.
+  # max-concurrent-compactions = 0
+
+  # CompactThroughput is the rate limit in bytes per second that we
+  # will allow TSM compactions to write to disk. Note that short bursts are allowed
+  # to happen at a possibly larger value, set by CompactThroughputBurst
+  # compact-throughput = "48m"
+
+  # CompactThroughputBurst is the rate limit in bytes per second that we
+  # will allow TSM compactions to write to disk.
+  # compact-throughput-burst = "48m"
+
+  # If true, then the mmap advise value MADV_WILLNEED will be provided to the kernel with respect to
+  # TSM files. This setting has been found to be problematic on some kernels, and defaults to off.
+  # It might help users who have slow disks in some cases. +  # tsm-use-madv-willneed = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+
+  # Settings for the inmem index
+
+  # The maximum series allowed per database before writes are

dropped.  This limit can prevent
+  # high cardinality issues at the database level.  This limit can be disabled by setting it to
+  # 0.
+  # max-series-per-database = 1000000
+
+  # The maximum number of tag values per tag that are allowed before writes are dropped.  This limit
+  # can prevent high cardinality tag values from being written to a measurement.  This limit can be
+  # disabled by setting it to 0.
+  # max-values-per-tag = 100000

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+
+  # Settings for the tsi1 index
+
+  # The threshold, in bytes, when an index write-ahead log file

will compact
+  # into an index file. Lower sizes will cause log files to be compacted more
+  # quickly and result in lower heap usage at the expense of write throughput.
+  # Higher sizes will be compacted less frequently, store more series in-memory,
+  # and provide higher write throughput.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+  # Values without a size suffix are in bytes.
+  # max-index-log-file-size = "1m"
+
+  # The size of the internal cache used in the TSI index to store previously
+  # calculated series results. Cached results will be returned quickly from the cache rather
+  # than needing to be recalculated when a subsequent query with a matching tag key/value
+  # predicate is executed. Setting this value to 0 will disable the cache, which may
+  # lead to query performance issues.
+  # This value should only be increased if it is known that the set of regularly used
+  # tag key/value predicates across all measurements for a database is larger than 100. An
+  # increase in cache size may lead to an increase in heap usage.
+  series-id-set-cache-size = 100

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+
+###
+### [coordinator]
+###
+### Controls the clustering service configuration.
+###
+
+[coordinator]
+  # The default time a write request will wait until a "timeout"

error is returned to the caller.
+  # write-timeout = "10s"
+
+  # The maximum number of concurrent queries allowed to be executing at one time.  If a query is
+  # executed and exceeds this limit, an error is returned to the caller.  This limit can be disabled
+  # by setting it to 0.
+  # max-concurrent-queries = 0
+
+  # The maximum time a query will is allowed to execute before being killed by the system.  This limit
+  # can help prevent run away queries.  Setting the value to 0 disables the limit.
+  # query-timeout = "0s"
+
+  # The time threshold when a query will be logged as a slow query.  This limit can be set to help
+  # discover slow or resource intensive queries.  Setting the value to 0 disables the slow query logging.
+  # log-queries-after = "0s"
+
+  # The maximum number of points a SELECT can process.  A value of 0 will make
+  # the maximum point count unlimited.  This will only be checked every second so queries will not
+  # be aborted immediately when hitting the limit.
+  # max-select-point = 0
+
+  # The maximum number of series a SELECT can run.  A value of 0 will make the maximum series
+  # count unlimited.
+  # max-select-series = 0
+
+  # The maximum number of group by time bucket a SELECT can create.  A value of zero will max the maximum
+  # number of buckets unlimited.
+  # max-select-buckets = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [retention]
+###
+### Controls the enforcement of retention policies for evicting

old data.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+###
+
+[retention]
+  # Determines whether retention policy enforcement enabled.
+  # enabled = true
+
+  # The interval of time when retention policy enforcement

checks run.
+  # check-interval = "30m"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [shard-precreation]
+###
+### Controls the precreation of shards, so they are available

before data arrives.
+### Only shards that, after creation, will have both a start- and end-time in the
+### future, will ever be created. Shards are never precreated that would be wholly

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+### or partially in the past.
+
+[shard-precreation]
+  # Determines whether shard pre-creation service is enabled.
+  # enabled = true
+
+  # The interval of time when the check to pre-create new shards

runs.
+  # check-interval = "10m"
+
+  # The default period ahead of the endtime of a shard group that its successor
+  # group is created.
+  # advance-period = "30m"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+
+###
+### Controls the system self-monitoring, statistics and

diagnostics.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+###
+### The internal database for monitoring data is created

automatically if
+### if it does not already exist. The target retention within this database
+### is called 'monitor' and is also created with a retention period of 7 days
+### and a replication factor of 1, if it does not exist. In all cases the
+### this retention policy is configured as the default for the database.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +15 -0
+
+[monitor]
+  # Whether to record statistics internally.
+  # store-enabled = true
+
+  # The destination database for recorded statistics
+  # store-database = "_internal"
+
+  # The interval at which to record statistics
+  # store-interval = "10s"
+
+###
+### [http]
+###
+### Controls how the HTTP endpoints are configured. These are

the primary

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +17 -0
+### mechanism for getting data into and out of InfluxDB.
+###
+
+[http]
+  # Determines whether HTTP endpoint is enabled.
+  # enabled = true
+
+  # Determines whether the Flux query endpoint is enabled.
+  # flux-enabled = false
+
+  # Determines whether the Flux query logging is enabled.
+  # flux-log-enabled = false
+
+  # The bind address used by the HTTP service.
+  # bind-address = ":8086"
+
+  # Determines whether user authentication is enabled over

HTTP/HTTPS.
+  # auth-enabled = false
+
+  # The default realm sent back when issuing a basic auth challenge.
+  # realm = "InfluxDB"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+  # Determines whether HTTP request logging is enabled.
+  # log-enabled = true
+
+  # Determines whether the HTTP write request logs should be

suppressed when the log is enabled.
+  # suppress-write-log = false
+
+  # When HTTP request logging is enabled, this option specifies the path where
+  # log entries should be written. If unspecified, the default is to write to stderr, which
+  # intermingles HTTP logs with internal InfluxDB logging. +  #
+  # If influxd is unable to access the specified path, it will log an error and fall back to writing
+  # the request log to stderr.
+  # access-log-path = ""
+
+  # Filters which requests should be logged. Each filter is of the pattern NNN, NNX, or NXX where N is
+  # a number and X is a wildcard for any number. To filter all 5xx responses, use the string 5xx.
+  # If multiple filters are used, then only one has to match. The default is to have no filters which
+  # will cause every request to be printed.
+  # access-log-status-filters = []

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+  # Determines whether detailed write logging is enabled.
+  # write-tracing = false
+
+  # Determines whether the pprof endpoint is enabled.  This

endpoint is used for
+  # troubleshooting and monitoring.
+  # pprof-enabled = true
+
+  # Enables authentication on pprof endpoints. Users will need admin permissions
+  # to access the pprof endpoints when this setting is enabled. This setting has
+  # no effect if either auth-enabled or pprof-enabled are set to false.
+  # pprof-auth-enabled = false
+
+  # Enables a pprof endpoint that binds to localhost:6060 immediately on startup.
+  # This is only needed to debug startup issues.
+  # debug-pprof-enabled = false
+
+  # Enables authentication on the /ping, /metrics, and deprecated /status
+  # endpoints. This setting has no effect if auth-enabled is set to false.
+  # ping-auth-enabled = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+
+  # Determines whether HTTPS is enabled.
+  # https-enabled = false
+
+  # The SSL certificate to use when HTTPS is enabled.
+  # https-certificate = "/etc/ssl/influxdb.pem"
+
+  # Use a separate private key location.
+  # https-private-key = ""
+
+  # The JWT auth shared secret to validate requests using JSON

web tokens.
+  # shared-secret = ""
+
+  # The default chunk size for result sets that should be chunked.
+  # max-row-limit = 0
+
+  # The maximum number of HTTP connections that may be open at once.  New connections that
+  # would exceed this limit are dropped.  Setting this value to 0 disables the limit.
+  # max-connection-limit = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Enable http service over unix domain socket
+  # unix-socket-enabled = false
+
+  # The path of the unix domain socket.
+  # bind-socket = "/var/run/influxdb.sock"
+
+  # The maximum size of a client request body, in bytes. Setting

this value to 0 disables the limit.
+  # max-body-size = 25000000

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +10 -0
+
+  # The maximum number of writes processed concurrently.
+  # Setting this to 0 disables the limit.
+  # max-concurrent-write-limit = 0
+
+  # The maximum number of writes queued for processing.
+  # Setting this to 0 disables the limit.
+  # max-enqueued-write-limit = 0
+
+  # The maximum duration for a write to wait in the queue to be

processed.
+  # Setting this to 0 or setting max-concurrent-write-limit to 0 disables the limit.
+  # enqueued-write-timeout = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+
+###
+### [logging]
+###
+### Controls how the logger emits logs to the output.
+###
+
+[logging]
+  # Determines which log encoder to use for logs. Available

options
+  # are auto, logfmt, and json. auto will use a more a more user-friendly
+  # output format if the output terminal is a TTY, but the format is not as
+  # easily machine-readable. When the output is a non-TTY, auto will use
+  # logfmt.
+  # format = "auto"
+
+  # Determines which level of logs will be emitted. The available levels
+  # are error, warn, info, and debug. Logs that are equal to or above the
+  # specified level will be emitted.
+  # level = "info"
+
+  # Suppresses the logo output that is printed when the program is started.
+  # The logo is always suppressed if STDOUT is not a TTY. +  # suppress-logo = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [subscriber]
+###
+### Controls the subscriptions, which can be used to fork a copy

of all data

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+### received by the InfluxDB host.
+###
+
+[subscriber]
+  # Determines whether the subscriber service is enabled.
+  # enabled = true
+
+  # The default timeout for HTTP writes to subscribers.
+  # http-timeout = "30s"
+
+  # Allows insecure HTTPS connections to subscribers.  This is

useful when testing with self-
+  # signed certificates.
+  # insecure-skip-verify = false
+
+  # The path to the PEM encoded CA certs file. If the empty string, the default system certs will be used
+  # ca-certs = ""
+
+  # The number of writer goroutines processing the write channel.
+  # write-concurrency = 40
+
+  # The number of in-flight writes buffered in the write channel.
+  # write-buffer-size = 1000

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +18 -0
+
+
+###
+### [[graphite]]
+###
+### Controls one or many listeners for Graphite data.
+###
+
+[[graphite]]
+  # Determines whether the graphite endpoint is enabled.
+  # enabled = false
+  # database = "graphite"
+  # retention-policy = ""
+  # bind-address = ":2003"
+  # protocol = "tcp"
+  # consistency-level = "one"
+
+  # These next lines control how batching works. You should have

this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer

limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # udp-read-buffer = 0
+
+  ### This string joins multiple matching 'measurement' values providing more control over the final measurement name. +  # separator = "."
+
+  ### Default tags that will be added to all metrics.  These can be overridden at the template level
+  ### or by tags extracted from metric
+  # tags = ["region=us-east", "zone=1c"]
+
+  ### Each template line requires a template pattern.  It can have an optional
+  ### filter before the template and separated by spaces.  It can also have optional extra
+  ### tags following the template.  Multiple tags should be separated by commas and no spaces
+  ### similar to the line protocol format.  There can be only one default template.
+  # templates = [
+  #   "*.app env.service.resource.measurement",
+  #   # Default template
+  #   "server.*",
+  # ]

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +14 -0
+
+###
+### [collectd]
+###
+### Controls one or many listeners for collectd data.
+###
+
+[[collectd]]
+  # enabled = false
+  # bind-address = ":25826"
+  # database = "collectd"
+  # retention-policy = ""
+  #
+  # The collectd service supports either scanning a directory

for multiple types
+  # db files, or specifying a single db file.
+  # typesdb = "/usr/local/share/collectd"
+  #
+  # security-level = "none"
+  # auth-file = "/etc/collectd/auth_file"
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer

limit
+  # batch-timeout = "10s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # read-buffer = 0
+
+  # Multi-value plugins can be handled two ways.
+  # "split" will parse and store the multi-value plugin data into separate measurements
+  # "join" will parse and store the multi-value plugin as a single multi-value measurement.
+  # "split" is the default behavior for backward compatibility with previous versions of influxdb.
+  # parse-multivalue-plugin = "split"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +19 -0
+###
+### [opentsdb]
+###
+### Controls one or many listeners for OpenTSDB data.
+###
+
+[[opentsdb]]
+  # enabled = false
+  # bind-address = ":4242"
+  # database = "opentsdb"
+  # retention-policy = ""
+  # consistency-level = "one"
+  # tls-enabled = false
+  # certificate= "/etc/ssl/influxdb.pem"
+
+  # Log an error for every malformed point.
+  # log-point-errors = true
+
+  # These next lines control how batching works. You should have

this enabled
+  # otherwise you could get dropped metrics or poor performance. Only points
+  # metrics received over the telnet protocol undergo batching.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 1000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 5
+
+  # Flush at least this often even if we haven't hit buffer

limit
+  # batch-timeout = "1s"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [[udp]]
+###
+### Controls the listeners for InfluxDB line protocol data via

UDP.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+###
+
+[[udp]]
+  # enabled = false
+  # bind-address = ":8089"
+  # database = "udp"
+  # retention-policy = ""
+
+  # InfluxDB precision for timestamps on received points ("" or

"n", "u", "ms", "s", "m", "h")
+  # precision = ""
+
+  # These next lines control how batching works. You should have this enabled
+  # otherwise you could get dropped metrics or poor performance. Batching
+  # will buffer points in memory if you have many coming in.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Will flush at least this often even if we haven't hit buffer

limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+  # read-buffer = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +12 -0
+
+###
+### [continuous_queries]
+###
+### Controls how continuous queries are run within InfluxDB.
+###
+
+[continuous_queries]
+  # Determines whether the continuous query service is enabled.
+  # enabled = true
+
+  # Controls whether queries are logged when executed by the CQ

service.
+  # log-enabled = true
+
+  # Controls whether queries are logged to the self-monitoring data store.
+  # query-stats-enabled = false
+
+  # interval for how often continuous queries will be checked if they need to run
+  # run-interval = "1s"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+
+###
+### [tls]
+###
+### Global configuration settings for TLS in InfluxDB.
+###
+
+[tls]
+  # Determines the available set of cipher suites. See 

https://golang.org/pkg/crypto/tls/#pkg-constants
+  # for a list of available ciphers, which depends on the version of Go (use the query
+  # SHOW DIAGNOSTICS to see the version of Go used to build InfluxDB). If not specified, uses
+  # the default settings from Go's crypto/tls package. +  # ciphers = [
+  #   "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305",
+  #   "TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305",
+  # ]
+
+  # Minimum version of the tls protocol that will be negotiated. If not specified, uses the
+  # default settings from Go's crypto/tls package.
+  # min-version = "tls1.2"
+
+  # Maximum version of the tls protocol that will be negotiated. If not specified, uses the
+  # default settings from Go's crypto/tls package.
+  # max-version = "tls1.3"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +1 -0
new file mode 100644
index 000000000..4f2bb78b2
@@ -0,0 +1,63 @@
+DESCRIPTION = "InfluxDB is a time series database designed to

handle high write and query loads."
+HOMEPAGE = "
https://www.influxdata.com/products/influxdb-overview/"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +3 -0
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "

file://src/${GO_IMPORT}/LICENSE;md5=ba8146ad9cc2a128209983265136e06a "

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +15 -0
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+RDEPENDS_${PN} = "bash"
+RDEPENDS_${PN}-dev = "bash"
+
+GO_IMPORT = "github.com/influxdata/influxdb"
+
+GO_INSTALL = "\
+    ${GO_IMPORT}/cmd/influx \
+    ${GO_IMPORT}/cmd/influxd \
+"
+
+SRC_URI = "\
+   

git://${GO_IMPORT};protocol=https;branch=1.7;destsuffix=${BPN}-
${PV}/src/${GO_IMPORT} \
+    file://influxdb \
+    file://influxdb.conf \
+"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +7 -0
+
+SRCREV = "c958f436b2e538a88a7815aad721c7774a0b8f63"
+
+inherit go-mod systemd update-rc.d useradd
+
+USERADD_PACKAGES = "${PN}"
+USERADD_PARAM_${PN} = "--system -d /var/lib/influxdb -m -s

/bin/nologin influxdb"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +10 -0
+
+do_install_prepend() {
+    rm ${B}/src/${GO_IMPORT}/build.py
+    rm ${B}/src/${GO_IMPORT}/build.sh
+    rm ${B}/src/${GO_IMPORT}/Dockerfile*
+}
+
+do_install_append() {
+    install -d ${D}${sysconfdir}/influxdb
+    install -m 0644 ${WORKDIR}/influxdb.conf

${D}${sysconfdir}/influxdb
+    chown -R root.influxdb ${D}${sysconfdir}/influxdb +
+    install -d ${D}${sysconfdir}/init.d
+    install -m 0755 ${WORKDIR}/influxdb ${D}${sysconfdir}/init.d/influxdb
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'sysvinit', d)}" ] ; then
+        install -d ${D}${sysconfdir}/logrotate.d
+        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/logrotate ${D}${sysconfdir}/logrotate.d/influxdb
+    fi
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}" ] ; then
+        install -d ${D}${systemd_unitdir}/system
+        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/influxdb.service ${D}${systemd_system_unitdir}/influxdb.service
+    fi

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +9 -1
+
+    # TODO chown
+}
+
+INITSCRIPT_PACKAGES = "${PN}"
+INITSCRIPT_NAME = "influxdb"
+INITSCRIPT_PARAMS = "defaults"
+
+SYSTEMD_SERVICE_${PN} = "influxdb.service"
--

2.29.2

Signature · 3 lines
Thomas Perrot, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
#4 lore raw

Just test it in your environment and see if it does not break things.

Quoted 1,152 lines · Thomas Perrot

Hello Khem,

Quoted 3 lines · Khem Raj

also see
https://github.com/pkg/term/issues/49

Thanks, I saw you submitted a patch fixing this build issue. Do you need me to have a hand in on another point?

Best regards,
Thomas

Quoted 1,122 lines · Khem Raj
Quoted 1,121 lines

Hi Thomas

This fails on mips see
https://errors.yoctoproject.org/Errors/Details/540902/

# github.com/pkg/term/termios
../../../../pkg/mod/github.com/pkg/[email protected]
/termios/termios_linux.go:78:61:
attr.Ispeed undefined (type *syscall.Termios has no field or method
Ispeed)
../../../../pkg/mod/github.com/pkg/[email protected]
/termios/termios_linux.go:81:61:
attr.Ospeed undefined (type *syscall.Termios has no field or method
Ospeed)

I think these perhaps can be fixed in term package maybe just comment them out.

Thanks
-Khem

Quoted 1,096 lines · Thomas Perrot

InfluxDB is a time series database designed to handle high write and query
loads.

---
 .../recipes-dbs/influxdb/influxdb/influxdb    | 235 +++++++
 .../influxdb/influxdb/influxdb.conf           | 586
++++++++++++++++++
 .../recipes-dbs/influxdb/influxdb_1.7.10.bb   |  63 ++
 3 files changed, 884 insertions(+)
 create mode 100755 meta-oe/recipes-
dbs/influxdb/influxdb/influxdb
 create mode 100644 meta-oe/recipes-
dbs/influxdb/influxdb/influxdb.conf
 create mode 100644 meta-oe/recipes-

dbs/influxdb/influxdb_1.7.10.bb

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +11 -0
new file mode 100755
index 000000000..ffb29c3ae
@@ -0,0 +1,235 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides:          influxd
+# Required-Start:    $all
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start the InfluxDB process
+### END INIT INFO
+set -x
+# If you modify this, please make sure to also edit

influxdb.service

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +2 -0
+
+# Command-line options that can be set in

/etc/default/influxdb. These will override

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +20 -0
+# any config file values.
+DEFAULT=/etc/default/influxdb
+
+# Daemon options
+INFLUXD_OPTS=
+
+# Process name ( For display )
+NAME=influxdb
+
+# User and group
+USER=influxdb
+GROUP=influxdb
+
+# Check for sudo or root privileges before continuing
+if [ "$UID" != "0" ]; then
+    echo "You must be root to run this script"
+    exit 1
+fi
+
+# Daemon name, where is the actual executable If the daemon is

not

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +59 -0
+# there, then exit.
+DAEMON=/usr/bin/influxd
+if [ ! -x $DAEMON ]; then
+    echo "Executable $DAEMON does not exist!"
+    exit 5
+fi
+
+# Configuration file
+CONFIG=/etc/influxdb/influxdb.conf
+
+# PID file for the daemon
+PIDFILE=/var/run/influxdb/influxd.pid
+PIDDIR=`dirname $PIDFILE`
+if [ ! -d "$PIDDIR" ]; then
+    mkdir -p $PIDDIR
+    chown $USER:$GROUP $PIDDIR
+fi
+
+# Max open files
+OPEN_FILE_LIMIT=65536
+
+if [ -r /lib/lsb/init-functions ]; then
+    source /lib/lsb/init-functions
+fi
+
+# Logging
+if [ -z "$STDOUT" ]; then
+    STDOUT=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDOUT" ]; then
+    mkdir -p $(dirname $STDOUT)
+fi
+
+if [ -z "$STDERR" ]; then
+    STDERR=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDERR" ]; then
+    mkdir -p $(dirname $STDERR)
+fi
+
+# Override init script variables with DEFAULT values
+if [ -r $DEFAULT ]; then
+    source $DEFAULT
+fi
+
+function log_failure_msg() {
+    echo "$@" "[ FAILED ]"
+}
+
+function log_success_msg() {
+    echo "$@" "[ OK ]"
+}
+
+function start() {
+    # Check if config file exist
+    if [ ! -r $CONFIG ]; then
+        log_failure_msg "config file $CONFIG doesn't exist (or

you don't have permission to view)"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +4 -0
+        exit 4
+    fi
+
+    # Check that the PID file exists, and check the actual

status of process

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +11 -0
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # Process is already up
+            log_success_msg "$NAME process is already running"
+            return 0
+        fi
+    else
+        su -s /bin/sh -c "touch $PIDFILE" $USER &>/dev/null
+        if [ $? -ne 0 ]; then
+            log_failure_msg "$PIDFILE not writable, check

permissions"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +5 -0
+            exit 5
+        fi
+    fi
+
+    # Bump the file limits, before launching the daemon. These

will

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +4 -0
+    # carry over to launched processes.
+    ulimit -n $OPEN_FILE_LIMIT
+    if [ $? -ne 0 ]; then
+        log_failure_msg "Unable to set ulimit to

$OPEN_FILE_LIMIT"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +18 -0
+        exit 1
+    fi
+
+    # Launch process
+    echo "Starting $NAME..."
+    if command -v start-stop-daemon &>/dev/null; then
+        start-stop-daemon \
+            --background \
+            --chuid $USER:$GROUP \
+            --start \
+            --quiet \
+            --pidfile $PIDFILE \
+            --exec $DAEMON \
+            -- \
+            -config $CONFIG \
+            $INFLUXD_OPTS >>$STDOUT 2>>$STDERR
+    else
+        local CMD="$DAEMON -config $CONFIG $INFLUXD_OPTS
Quoted 1 line
Quoted 1 line

$STDOUT 2>>$STDERR &"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +27 -0
+        su -s /bin/sh -c "$CMD" $USER
+    fi
+
+    # Sleep to verify process is still up
+    sleep 1
+    echo $(pidof influxd) > $PIDFILE
+    if [ -f $PIDFILE ]; then
+        # PIDFILE exists
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # PID up, service running
+            log_success_msg "$NAME process was started"
+            return 0
+        fi
+    fi
+    log_failure_msg "$NAME process was unable to start"
+    exit 1
+}
+
+function stop() {
+    # Stop the daemon.
+    if [ -f $PIDFILE ]; then
+        local PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            echo "Stopping $NAME..."
+            # Process still up, send SIGTERM and remove PIDFILE
+            kill -s TERM $PID &>/dev/null && rm -f "$PIDFILE"

&>/dev/null

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +20 -0
+            n=0
+            while true; do
+                # Enter loop to ensure process is stopped
+                kill -0 $PID &>/dev/null
+                if [ "$?" != "0" ]; then
+                    # Process stopped, break from loop
+                    log_success_msg "$NAME process was stopped"
+                    return 0
+                fi
+
+                # Process still up after signal, sleep and wait
+                sleep 1
+                n=$(expr $n + 1)
+                if [ $n -eq 30 ]; then
+                    # After 30 seconds, send SIGKILL
+                    echo "Timeout exceeded, sending SIGKILL..."
+                    kill -s KILL $PID &>/dev/null
+                elif [ $? -eq 40 ]; then
+                    # After 40 seconds, error out
+                    log_failure_msg "could not stop $NAME

process"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +54 -0
+                    exit 1
+                fi
+            done
+        fi
+    fi
+    log_success_msg "$NAME process already stopped"
+}
+
+function restart() {
+    # Restart the daemon.
+    stop
+    start
+}
+
+function status() {
+    # Check the status of the process.
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            log_success_msg "$NAME process is running"
+            exit 0
+        fi
+    fi
+    log_failure_msg "$NAME process is not running"
+    exit 1
+}
+
+case $1 in
+    start)
+        start
+        ;;
+
+    stop)
+        stop
+        ;;
+
+    restart)
+        restart
+        ;;
+
+    status)
+        status
+        ;;
+
+    version)
+        $DAEMON version
+        ;;
+
+    *)
+        # For invalid arguments, print the usage message.
+        echo "Usage: $0 {start|stop|restart|status|version}"
+        exit 2
+        ;;
+esac
meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
new file mode 100644
index 000000000..21c0926f2
@@ -0,0 +1,586 @@
+### Welcome to the InfluxDB configuration file.
+
+# The values in this file override the default values used by

the system if
+# a config option is not specified. The commented out lines are the configuration
+# field and the default value used. Uncommenting a line and changing the value
+# will change the value used at runtime when the process is restarted.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+
+# Once every 24 hours InfluxDB will report usage data to

usage.influxdata.com
+# The data includes a random ID, os, arch, version, the number of series and other

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+# usage data. No data from user databases is ever transmitted.
+# Change this option to true to disable reporting.
+# reporting-disabled = false
+
+# Bind address to use for the RPC service for backup and

restore.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+# bind-address = "127.0.0.1:8088"
+
+###
+### [meta]
+###
+### Controls the parameters for the Raft consensus group that

stores metadata

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+### about the InfluxDB cluster.
+###
+
+[meta]
+  # Where the metadata/raft database is stored
+  dir = "/var/lib/influxdb/meta"
+
+  # Automatically create a default retention policy when

creating a database.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+  # retention-autocreate = true
+
+  # If log messages are printed for the meta service
+  # logging-enabled = true
+
+###
+### [data]
+###
+### Controls where the actual shard data for InfluxDB lives and

how it is
+### flushed from the WAL. "dir" may need to be changed to a suitable place
+### for your system, but the WAL settings are an advanced configuration. The

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+### defaults should work for most systems.
+###
+
+[data]
+  # The directory where the TSM storage engine stores TSM files.
+  dir = "/var/lib/influxdb/data"
+
+  # The directory where the TSM storage engine stores WAL files.
+  wal-dir = "/var/lib/influxdb/wal"
+
+  # The amount of time that a write will wait before fsyncing.

A duration
+ # greater than 0 can be used to batch up multiple fsync calls. This is useful for slower
+ # disks or when WAL write contention is seen. A value of 0s fsyncs every write to the WAL.
+ # Values in the range of 0-100ms are recommended for non-SSD disks.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # wal-fsync-delay = "0s"
+
+
+  # The type of shard index to use for new shards.  The default

is an in-memory index that is
+ # recreated at startup. A value of "tsi1" will use a disk based index that supports higher

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # cardinality datasets.
+  # index-version = "inmem"
+
+  # Trace logging provides more verbose output around the tsm

engine. Turning
+ # this on can provide more useful output for debugging tsm engine issues.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # trace-logging-enabled = false
+
+  # Whether queries should be logged before execution. Very

useful for troubleshooting, but will

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # log any sensitive data contained within a query.
+  # query-log-enabled = true
+
+  # Validates incoming writes to ensure keys only have valid

unicode characters.
+ # This setting will incur a small overhead because every key must be checked.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+  # validate-keys = false
+
+  # Settings for the TSM engine
+
+  # CacheMaxMemorySize is the maximum size a shard's cache can
+  # reach before it starts rejecting writes.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 =

1k).

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+  # Values without a size suffix are in bytes.
+  # cache-max-memory-size = "1g"
+
+  # CacheSnapshotMemorySize is the size at which the engine will
+  # snapshot the cache and write it to a TSM file, freeing up

memory
+ # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+  # Values without a size suffix are in bytes.
+  # cache-snapshot-memory-size = "25m"
+
+  # CacheSnapshotWriteColdDuration is the length of time at
+  # which the engine will snapshot the cache and write it to
+  # a new TSM file if the shard hasn't received writes or

deletes

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # cache-snapshot-write-cold-duration = "10m"
+
+  # CompactFullWriteColdDuration is the duration at which the

engine
+ # will compact all TSM files in a shard if it hasn't received a

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # write or delete
+  # compact-full-write-cold-duration = "4h"
+
+  # The maximum number of concurrent full and level compactions

that can run at one time. A
+ # value of 0 results in 50% of runtime.GOMAXPROCS(0) used at runtime. Any number greater
+ # than 0 limits compactions to that value. This setting does not apply

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # to cache snapshotting.
+  # max-concurrent-compactions = 0
+
+  # CompactThroughput is the rate limit in bytes per second that

we
+ # will allow TSM compactions to write to disk. Note that short bursts are allowed
+ # to happen at a possibly larger value, set by CompactThroughputBurst

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # compact-throughput = "48m"
+
+  # CompactThroughputBurst is the rate limit in bytes per second

that we

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # will allow TSM compactions to write to disk.
+  # compact-throughput-burst = "48m"
+
+  # If true, then the mmap advise value MADV_WILLNEED will be

provided to the kernel with respect to
+ # TSM files. This setting has been found to be problematic on some kernels, and defaults to off.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+  # It might help users who have slow disks in some cases.
+  # tsm-use-madv-willneed = false
+
+  # Settings for the inmem index
+
+  # The maximum series allowed per database before writes are

dropped. This limit can prevent
+ # high cardinality issues at the database level. This limit can be disabled by setting it to

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # 0.
+  # max-series-per-database = 1000000
+
+  # The maximum number of tag values per tag that are allowed

before writes are dropped. This limit
+ # can prevent high cardinality tag values from being written to a measurement. This limit can be

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+  # disabled by setting it to 0.
+  # max-values-per-tag = 100000
+
+  # Settings for the tsi1 index
+
+  # The threshold, in bytes, when an index write-ahead log file

will compact
+ # into an index file. Lower sizes will cause log files to be compacted more
+ # quickly and result in lower heap usage at the expense of write throughput.
+ # Higher sizes will be compacted less frequently, store more series in-memory,

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+  # and provide higher write throughput.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 =

1k).

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # Values without a size suffix are in bytes.
+  # max-index-log-file-size = "1m"
+
+  # The size of the internal cache used in the TSI index to

store previously
+ # calculated series results. Cached results will be returned quickly from the cache rather
+ # than needing to be recalculated when a subsequent query with a matching tag key/value
+ # predicate is executed. Setting this value to 0 will disable the cache, which may

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+  # lead to query performance issues.
+  # This value should only be increased if it is known that the

set of regularly used
+ # tag key/value predicates across all measurements for a database is larger than 100. An
+ # increase in cache size may lead to an increase in heap usage.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +10 -0
+  series-id-set-cache-size = 100
+
+###
+### [coordinator]
+###
+### Controls the clustering service configuration.
+###
+
+[coordinator]
+  # The default time a write request will wait until a "timeout"

error is returned to the caller.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # write-timeout = "10s"
+
+  # The maximum number of concurrent queries allowed to be

executing at one time. If a query is
+ # executed and exceeds this limit, an error is returned to the caller. This limit can be disabled

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # by setting it to 0.
+  # max-concurrent-queries = 0
+
+  # The maximum time a query will is allowed to execute before

being killed by the system. This limit
+ # can help prevent run away queries. Setting the value to 0 disables the limit.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # query-timeout = "0s"
+
+  # The time threshold when a query will be logged as a slow

query. This limit can be set to help
+ # discover slow or resource intensive queries. Setting the value to 0 disables the slow query logging.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # log-queries-after = "0s"
+
+  # The maximum number of points a SELECT can process.  A value

of 0 will make
+ # the maximum point count unlimited. This will only be checked every second so queries will not

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # be aborted immediately when hitting the limit.
+  # max-select-point = 0
+
+  # The maximum number of series a SELECT can run.  A value of 0

will make the maximum series

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # count unlimited.
+  # max-select-series = 0
+
+  # The maximum number of group by time bucket a SELECT can

create. A value of zero will max the maximum

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+  # number of buckets unlimited.
+  # max-select-buckets = 0
+
+###
+### [retention]
+###
+### Controls the enforcement of retention policies for evicting

old data.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+###
+
+[retention]
+  # Determines whether retention policy enforcement enabled.
+  # enabled = true
+
+  # The interval of time when retention policy enforcement

checks run.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+  # check-interval = "30m"
+
+###
+### [shard-precreation]
+###
+### Controls the precreation of shards, so they are available

before data arrives.
+### Only shards that, after creation, will have both a start- and end-time in the
+### future, will ever be created. Shards are never precreated that would be wholly

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+### or partially in the past.
+
+[shard-precreation]
+  # Determines whether shard pre-creation service is enabled.
+  # enabled = true
+
+  # The interval of time when the check to pre-create new shards

runs.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # check-interval = "10m"
+
+  # The default period ahead of the endtime of a shard group

that its successor

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+  # group is created.
+  # advance-period = "30m"
+
+###
+### Controls the system self-monitoring, statistics and

diagnostics.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+###
+### The internal database for monitoring data is created

automatically if
+### if it does not already exist. The target retention within this database
+### is called 'monitor' and is also created with a retention period of 7 days
+### and a replication factor of 1, if it does not exist. In all cases the
+### this retention policy is configured as the default for the database.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +15 -0
+
+[monitor]
+  # Whether to record statistics internally.
+  # store-enabled = true
+
+  # The destination database for recorded statistics
+  # store-database = "_internal"
+
+  # The interval at which to record statistics
+  # store-interval = "10s"
+
+###
+### [http]
+###
+### Controls how the HTTP endpoints are configured. These are

the primary

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +17 -0
+### mechanism for getting data into and out of InfluxDB.
+###
+
+[http]
+  # Determines whether HTTP endpoint is enabled.
+  # enabled = true
+
+  # Determines whether the Flux query endpoint is enabled.
+  # flux-enabled = false
+
+  # Determines whether the Flux query logging is enabled.
+  # flux-log-enabled = false
+
+  # The bind address used by the HTTP service.
+  # bind-address = ":8086"
+
+  # Determines whether user authentication is enabled over

HTTP/HTTPS.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # auth-enabled = false
+
+  # The default realm sent back when issuing a basic auth

challenge.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+  # realm = "InfluxDB"
+
+  # Determines whether HTTP request logging is enabled.
+  # log-enabled = true
+
+  # Determines whether the HTTP write request logs should be

suppressed when the log is enabled.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # suppress-write-log = false
+
+  # When HTTP request logging is enabled, this option specifies

the path where
+ # log entries should be written. If unspecified, the default is to write to stderr, which

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # intermingles HTTP logs with internal InfluxDB logging.
+  #
+  # If influxd is unable to access the specified path, it will

log an error and fall back to writing

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # the request log to stderr.
+  # access-log-path = ""
+
+  # Filters which requests should be logged. Each filter is of

the pattern NNN, NNX, or NXX where N is
+ # a number and X is a wildcard for any number. To filter all 5xx responses, use the string 5xx.
+ # If multiple filters are used, then only one has to match. The default is to have no filters which

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+  # will cause every request to be printed.
+  # access-log-status-filters = []
+
+  # Determines whether detailed write logging is enabled.
+  # write-tracing = false
+
+  # Determines whether the pprof endpoint is enabled.  This

endpoint is used for

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # troubleshooting and monitoring.
+  # pprof-enabled = true
+
+  # Enables authentication on pprof endpoints. Users will need

admin permissions
+ # to access the pprof endpoints when this setting is enabled. This setting has
+ # no effect if either auth-enabled or pprof-enabled are set to false.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # pprof-auth-enabled = false
+
+  # Enables a pprof endpoint that binds to localhost:6060

immediately on startup.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # This is only needed to debug startup issues.
+  # debug-pprof-enabled = false
+
+  # Enables authentication on the /ping, /metrics, and

deprecated /status
+ # endpoints. This setting has no effect if auth-enabled is set to false.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +12 -0
+  # ping-auth-enabled = false
+
+  # Determines whether HTTPS is enabled.
+  # https-enabled = false
+
+  # The SSL certificate to use when HTTPS is enabled.
+  # https-certificate = "/etc/ssl/influxdb.pem"
+
+  # Use a separate private key location.
+  # https-private-key = ""
+
+  # The JWT auth shared secret to validate requests using JSON

web tokens.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # shared-secret = ""
+
+  # The default chunk size for result sets that should be

chunked.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # max-row-limit = 0
+
+  # The maximum number of HTTP connections that may be open at

once. New connections that
+ # would exceed this limit are dropped. Setting this value to 0 disables the limit.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+  # max-connection-limit = 0
+
+  # Enable http service over unix domain socket
+  # unix-socket-enabled = false
+
+  # The path of the unix domain socket.
+  # bind-socket = "/var/run/influxdb.sock"
+
+  # The maximum size of a client request body, in bytes. Setting

this value to 0 disables the limit.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+  # max-body-size = 25000000
+
+  # The maximum number of writes processed concurrently.
+  # Setting this to 0 disables the limit.
+  # max-concurrent-write-limit = 0
+
+  # The maximum number of writes queued for processing.
+  # Setting this to 0 disables the limit.
+  # max-enqueued-write-limit = 0
+
+  # The maximum duration for a write to wait in the queue to be

processed.
+ # Setting this to 0 or setting max-concurrent-write-limit to 0 disables the limit.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +10 -0
+  # enqueued-write-timeout = 0
+
+###
+### [logging]
+###
+### Controls how the logger emits logs to the output.
+###
+
+[logging]
+  # Determines which log encoder to use for logs. Available

options
+ # are auto, logfmt, and json. auto will use a more a more user-friendly
+ # output format if the output terminal is a TTY, but the format is not as
+ # easily machine-readable. When the output is a non-TTY, auto will use

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # logfmt.
+  # format = "auto"
+
+  # Determines which level of logs will be emitted. The

available levels
+ # are error, warn, info, and debug. Logs that are equal to or above the

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # specified level will be emitted.
+  # level = "info"
+
+  # Suppresses the logo output that is printed when the program

is started.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+  # The logo is always suppressed if STDOUT is not a TTY.
+  # suppress-logo = false
+
+###
+### [subscriber]
+###
+### Controls the subscriptions, which can be used to fork a copy

of all data

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+### received by the InfluxDB host.
+###
+
+[subscriber]
+  # Determines whether the subscriber service is enabled.
+  # enabled = true
+
+  # The default timeout for HTTP writes to subscribers.
+  # http-timeout = "30s"
+
+  # Allows insecure HTTPS connections to subscribers.  This is

useful when testing with self-

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # signed certificates.
+  # insecure-skip-verify = false
+
+  # The path to the PEM encoded CA certs file. If the empty

string, the default system certs will be used

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # ca-certs = ""
+
+  # The number of writer goroutines processing the write

channel.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # write-concurrency = 40
+
+  # The number of in-flight writes buffered in the write

channel.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +19 -0
+  # write-buffer-size = 1000
+
+
+###
+### [[graphite]]
+###
+### Controls one or many listeners for Graphite data.
+###
+
+[[graphite]]
+  # Determines whether the graphite endpoint is enabled.
+  # enabled = false
+  # database = "graphite"
+  # retention-policy = ""
+  # bind-address = ":2003"
+  # protocol = "tcp"
+  # consistency-level = "one"
+
+  # These next lines control how batching works. You should have

this enabled
+ # otherwise you could get dropped metrics or poor performance. Batching

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer

limit

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will

fail if set above OS max.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # udp-read-buffer = 0
+
+  ### This string joins multiple matching 'measurement' values

providing more control over the final measurement name.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # separator = "."
+
+  ### Default tags that will be added to all metrics.  These can

be overridden at the template level

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  ### or by tags extracted from metric
+  # tags = ["region=us-east", "zone=1c"]
+
+  ### Each template line requires a template pattern.  It can

have an optional
+ ### filter before the template and separated by spaces. It can also have optional extra
+ ### tags following the template. Multiple tags should be separated by commas and no spaces
+ ### similar to the line protocol format. There can be only one default template.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +19 -0
+  # templates = [
+  #   "*.app env.service.resource.measurement",
+  #   # Default template
+  #   "server.*",
+  # ]
+
+###
+### [collectd]
+###
+### Controls one or many listeners for collectd data.
+###
+
+[[collectd]]
+  # enabled = false
+  # bind-address = ":25826"
+  # database = "collectd"
+  # retention-policy = ""
+  #
+  # The collectd service supports either scanning a directory

for multiple types

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+  # db files, or specifying a single db file.
+  # typesdb = "/usr/local/share/collectd"
+  #
+  # security-level = "none"
+  # auth-file = "/etc/collectd/auth_file"
+
+  # These next lines control how batching works. You should have

this enabled
+ # otherwise you could get dropped metrics or poor performance. Batching

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer

limit

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # batch-timeout = "10s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will

fail if set above OS max.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # read-buffer = 0
+
+  # Multi-value plugins can be handled two ways.
+  # "split" will parse and store the multi-value plugin data

into separate measurements
+ # "join" will parse and store the multi-value plugin as a single multi-value measurement.
+ # "split" is the default behavior for backward compatibility with previous versions of influxdb.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +20 -0
+  # parse-multivalue-plugin = "split"
+###
+### [opentsdb]
+###
+### Controls one or many listeners for OpenTSDB data.
+###
+
+[[opentsdb]]
+  # enabled = false
+  # bind-address = ":4242"
+  # database = "opentsdb"
+  # retention-policy = ""
+  # consistency-level = "one"
+  # tls-enabled = false
+  # certificate= "/etc/ssl/influxdb.pem"
+
+  # Log an error for every malformed point.
+  # log-point-errors = true
+
+  # These next lines control how batching works. You should have

this enabled
+ # otherwise you could get dropped metrics or poor performance. Only points

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+  # metrics received over the telnet protocol undergo batching.
+
+  # Flush if this many points get buffered
+  # batch-size = 1000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 5
+
+  # Flush at least this often even if we haven't hit buffer

limit

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+  # batch-timeout = "1s"
+
+###
+### [[udp]]
+###
+### Controls the listeners for InfluxDB line protocol data via

UDP.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+###
+
+[[udp]]
+  # enabled = false
+  # bind-address = ":8089"
+  # database = "udp"
+  # retention-policy = ""
+
+  # InfluxDB precision for timestamps on received points ("" or

"n", "u", "ms", "s", "m", "h")

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # precision = ""
+
+  # These next lines control how batching works. You should have

this enabled
+ # otherwise you could get dropped metrics or poor performance. Batching

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+  # will buffer points in memory if you have many coming in.
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Will flush at least this often even if we haven't hit buffer

limit

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will

fail if set above OS max.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +13 -0
+  # read-buffer = 0
+
+###
+### [continuous_queries]
+###
+### Controls how continuous queries are run within InfluxDB.
+###
+
+[continuous_queries]
+  # Determines whether the continuous query service is enabled.
+  # enabled = true
+
+  # Controls whether queries are logged when executed by the CQ

service.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # log-enabled = true
+
+  # Controls whether queries are logged to the self-monitoring

data store.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+  # query-stats-enabled = false
+
+  # interval for how often continuous queries will be checked if

they need to run

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +10 -0
+  # run-interval = "1s"
+
+###
+### [tls]
+###
+### Global configuration settings for TLS in InfluxDB.
+###
+
+[tls]
+  # Determines the available set of cipher suites. See

https://golang.org/pkg/crypto/tls/#pkg-constants
+ # for a list of available ciphers, which depends on the version of Go (use the query
+ # SHOW DIAGNOSTICS to see the version of Go used to build InfluxDB). If not specified, uses

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+  # the default settings from Go's crypto/tls package.
+  # ciphers = [
+  #   "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305",
+  #   "TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305",
+  # ]
+
+  # Minimum version of the tls protocol that will be negotiated.

If not specified, uses the

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+  # default settings from Go's crypto/tls package.
+  # min-version = "tls1.2"
+
+  # Maximum version of the tls protocol that will be negotiated.

If not specified, uses the

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+  # default settings from Go's crypto/tls package.
+  # max-version = "tls1.3"
meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +1 -0
new file mode 100644
index 000000000..4f2bb78b2
@@ -0,0 +1,63 @@
+DESCRIPTION = "InfluxDB is a time series database designed to

handle high write and query loads."
+HOMEPAGE = "
https://www.influxdata.com/products/influxdb-overview/"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +3 -0
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "

file://src/${GO_IMPORT}/LICENSE;md5=ba8146ad9cc2a128209983265136e06a "

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +15 -0
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+RDEPENDS_${PN} = "bash"
+RDEPENDS_${PN}-dev = "bash"
+
+GO_IMPORT = "github.com/influxdata/influxdb"
+
+GO_INSTALL = "\
+    ${GO_IMPORT}/cmd/influx \
+    ${GO_IMPORT}/cmd/influxd \
+"
+
+SRC_URI = "\
+

git://${GO_IMPORT};protocol=https;branch=1.7;destsuffix=${BPN}-
${PV}/src/${GO_IMPORT} \

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +10 -0
+    file://influxdb \
+    file://influxdb.conf \
+"
+
+SRCREV = "c958f436b2e538a88a7815aad721c7774a0b8f63"
+
+inherit go-mod systemd update-rc.d useradd
+
+USERADD_PACKAGES = "${PN}"
+USERADD_PARAM_${PN} = "--system -d /var/lib/influxdb -m -s

/bin/nologin influxdb"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +10 -0
+
+do_install_prepend() {
+    rm ${B}/src/${GO_IMPORT}/build.py
+    rm ${B}/src/${GO_IMPORT}/build.sh
+    rm ${B}/src/${GO_IMPORT}/Dockerfile*
+}
+
+do_install_append() {
+    install -d ${D}${sysconfdir}/influxdb
+    install -m 0644 ${WORKDIR}/influxdb.conf

${D}${sysconfdir}/influxdb

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +4 -0
+    chown -R root.influxdb ${D}${sysconfdir}/influxdb
+
+    install -d ${D}${sysconfdir}/init.d
+    install -m 0755 ${WORKDIR}/influxdb

${D}${sysconfdir}/init.d/influxdb

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +2 -0
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'sysvinit', d)}"

] ; then

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +2 -0
+        install -d ${D}${sysconfdir}/logrotate.d
+        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/logrotate

${D}${sysconfdir}/logrotate.d/influxdb

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +3 -0
+    fi
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}"

] ; then

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +2 -0
+        install -d ${D}${systemd_unitdir}/system
+        install -m 0644

${S}/src/${GO_IMPORT}/scripts/influxdb.service
${D}${systemd_system_unitdir}/influxdb.service

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +8 -0
+    fi
+
+    # TODO chown
+}
+
+INITSCRIPT_PACKAGES = "${PN}"
+INITSCRIPT_NAME = "influxdb"
+INITSCRIPT_PARAMS = "defaults"
Quoted 11 lines
Quoted 8 lines
Quoted 8 lines
meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +2 -1
+
+SYSTEMD_SERVICE_${PN} = "influxdb.service"
--

2.29.2

--
Thomas Perrot, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

#5 lore raw

Hello Khem,

Quoted 2 lines · Khem Raj

Just test it in your environment and see if it does not break things.

I test it in my environment and it does not break anything.

Best regards,
Thomas

Quoted 1,283 lines
Quoted 1,278 lines · Thomas Perrot

Hello Khem,

Quoted 3 lines · Khem Raj

also see
https://github.com/pkg/term/issues/49

Thanks, I saw you submitted a patch fixing this build issue. Do you need me to have a hand in on another point?

Best regards,
Thomas

Quoted 1,248 lines
Quoted 1,246 lines · Khem Raj

Hi Thomas

This fails on mips see
https://errors.yoctoproject.org/Errors/Details/540902/

# github.com/pkg/term/termios
../../../../pkg/mod/github.com/pkg/[email protected]
/termios/termios_linux.go:78:61:
attr.Ispeed undefined (type *syscall.Termios has no field or
method
Ispeed)
../../../../pkg/mod/github.com/pkg/[email protected]
/termios/termios_linux.go:81:61:
attr.Ospeed undefined (type *syscall.Termios has no field or
method
Ospeed)

I think these perhaps can be fixed in term package maybe just comment them out.

Thanks
-Khem

Quoted 1,219 lines · Thomas Perrot

InfluxDB is a time series database designed to handle high write
and query
loads.

---
 .../recipes-dbs/influxdb/influxdb/influxdb    | 235 +++++++ .../influxdb/influxdb/influxdb.conf           | 586
++++++++++++++++++
 .../recipes-dbs/influxdb/influxdb_1.7.10.bb   |  63 ++

 3 files changed, 884 insertions(+)

 create mode 100755 meta-oe/recipes-
dbs/influxdb/influxdb/influxdb
 create mode 100644 meta-oe/recipes-
dbs/influxdb/influxdb/influxdb.conf
 create mode 100644 meta-oe/recipes-
dbs/influxdb/influxdb_1.7.10.bb

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +11 -0
new file mode 100755
index 000000000..ffb29c3ae
@@ -0,0 +1,235 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides:          influxd
+# Required-Start:    $all
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start the InfluxDB process
+### END INIT INFO
+set -x
+# If you modify this, please make sure to also edit

influxdb.service

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +2 -0
+
+# Command-line options that can be set in

/etc/default/influxdb.  These will override

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +20 -0
+# any config file values.
+DEFAULT=/etc/default/influxdb
+
+# Daemon options
+INFLUXD_OPTS=
+
+# Process name ( For display )
+NAME=influxdb
+
+# User and group
+USER=influxdb
+GROUP=influxdb
+
+# Check for sudo or root privileges before continuing
+if [ "$UID" != "0" ]; then
+    echo "You must be root to run this script"
+    exit 1
+fi
+
+# Daemon name, where is the actual executable If the daemon

is
not

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +59 -0
+# there, then exit.
+DAEMON=/usr/bin/influxd
+if [ ! -x $DAEMON ]; then
+    echo "Executable $DAEMON does not exist!"
+    exit 5
+fi
+
+# Configuration file
+CONFIG=/etc/influxdb/influxdb.conf
+
+# PID file for the daemon
+PIDFILE=/var/run/influxdb/influxd.pid
+PIDDIR=`dirname $PIDFILE`
+if [ ! -d "$PIDDIR" ]; then
+    mkdir -p $PIDDIR
+    chown $USER:$GROUP $PIDDIR
+fi
+
+# Max open files
+OPEN_FILE_LIMIT=65536
+
+if [ -r /lib/lsb/init-functions ]; then
+    source /lib/lsb/init-functions
+fi
+
+# Logging
+if [ -z "$STDOUT" ]; then
+    STDOUT=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDOUT" ]; then
+    mkdir -p $(dirname $STDOUT)
+fi
+
+if [ -z "$STDERR" ]; then
+    STDERR=/var/log/influxdb/influxd.log
+fi
+
+if [ ! -f "$STDERR" ]; then
+    mkdir -p $(dirname $STDERR)
+fi
+
+# Override init script variables with DEFAULT values
+if [ -r $DEFAULT ]; then
+    source $DEFAULT
+fi
+
+function log_failure_msg() {
+    echo "$@" "[ FAILED ]"
+}
+
+function log_success_msg() {
+    echo "$@" "[ OK ]"
+}
+
+function start() {
+    # Check if config file exist
+    if [ ! -r $CONFIG ]; then
+        log_failure_msg "config file $CONFIG doesn't exist

(or
you don't have permission to view)"
+        exit 4
+    fi
+
+    # Check that the PID file exists, and check the actual status of process
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # Process is already up
+            log_success_msg "$NAME process is already running"
+            return 0
+        fi
+    else
+        su -s /bin/sh -c "touch $PIDFILE" $USER &>/dev/null +        if [ $? -ne 0 ]; then
+            log_failure_msg "$PIDFILE not writable, check permissions"
+            exit 5
+        fi
+    fi
+
+    # Bump the file limits, before launching the daemon. These
will
+    # carry over to launched processes.
+    ulimit -n $OPEN_FILE_LIMIT
+    if [ $? -ne 0 ]; then
+        log_failure_msg "Unable to set ulimit to $OPEN_FILE_LIMIT"
+        exit 1
+    fi
+
+    # Launch process
+    echo "Starting $NAME..."
+    if command -v start-stop-daemon &>/dev/null; then +        start-stop-daemon \
+            --background \
+            --chuid $USER:$GROUP \
+            --start \
+            --quiet \
+            --pidfile $PIDFILE \
+            --exec $DAEMON \
+            -- \
+            -config $CONFIG \
+            $INFLUXD_OPTS >>$STDOUT 2>>$STDERR
+    else
+        local CMD="$DAEMON -config $CONFIG $INFLUXD_OPTS

Quoted 1 line
Quoted 1 line

$STDOUT 2>>$STDERR &"

+        su -s /bin/sh -c "$CMD" $USER
+    fi

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +24 -0
+
+    # Sleep to verify process is still up
+    sleep 1
+    echo $(pidof influxd) > $PIDFILE
+    if [ -f $PIDFILE ]; then
+        # PIDFILE exists
+        PID="$(cat $PIDFILE)"
+        if kill -0 "$PID" &>/dev/null; then
+            # PID up, service running
+            log_success_msg "$NAME process was started"
+            return 0
+        fi
+    fi
+    log_failure_msg "$NAME process was unable to start"
+    exit 1
+}
+
+function stop() {
+    # Stop the daemon.
+    if [ -f $PIDFILE ]; then
+        local PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            echo "Stopping $NAME..."
+            # Process still up, send SIGTERM and remove

PIDFILE
+            kill -s TERM $PID &>/dev/null && rm -f "$PIDFILE"
&>/dev/null
+            n=0
+            while true; do
+                # Enter loop to ensure process is stopped +                kill -0 $PID &>/dev/null
+                if [ "$?" != "0" ]; then
+                    # Process stopped, break from loop +                    log_success_msg "$NAME process was stopped"
+                    return 0
+                fi
+
+                # Process still up after signal, sleep and wait
+                sleep 1
+                n=$(expr $n + 1)
+                if [ $n -eq 30 ]; then
+                    # After 30 seconds, send SIGKILL +                    echo "Timeout exceeded, sending SIGKILL..."
+                    kill -s KILL $PID &>/dev/null +                elif [ $? -eq 40 ]; then
+                    # After 40 seconds, error out +                    log_failure_msg "could not stop $NAME process"
+                    exit 1
+                fi
+            done
+        fi
+    fi
+    log_success_msg "$NAME process already stopped"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file +48 -0
+}
+
+function restart() {
+    # Restart the daemon.
+    stop
+    start
+}
+
+function status() {
+    # Check the status of the process.
+    if [ -f $PIDFILE ]; then
+        PID="$(cat $PIDFILE)"
+        if kill -0 $PID &>/dev/null; then
+            log_success_msg "$NAME process is running"
+            exit 0
+        fi
+    fi
+    log_failure_msg "$NAME process is not running"
+    exit 1
+}
+
+case $1 in
+    start)
+        start
+        ;;
+
+    stop)
+        stop
+        ;;
+
+    restart)
+        restart
+        ;;
+
+    status)
+        status
+        ;;
+
+    version)
+        $DAEMON version
+        ;;
+
+    *)
+        # For invalid arguments, print the usage message.
+        echo "Usage: $0 {start|stop|restart|status|version}"
+        exit 2
+        ;;
+esac
(quoted diff) +0 -0

dbs/influxdb/influxdb/influxdb.conf b/meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file mode 100644
index 000000000..21c0926f2

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
@@ -0,0 +1,586 @@
+### Welcome to the InfluxDB configuration file.
+
+# The values in this file override the default values used

by
the system if
+# a config option is not specified. The commented out lines are
the configuration
+# field and the default value used. Uncommenting a line and changing the value
+# will change the value used at runtime when the process is restarted.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+
+# Once every 24 hours InfluxDB will report usage data to

usage.influxdata.com
+# The data includes a random ID, os, arch, version, the number
of series and other
+# usage data. No data from user databases is ever transmitted.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+# Change this option to true to disable reporting.
+# reporting-disabled = false
+
+# Bind address to use for the RPC service for backup and

restore.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +6 -0
+# bind-address = "127.0.0.1:8088"
+
+###
+### [meta]
+###
+### Controls the parameters for the Raft consensus group

that
stores metadata

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+### about the InfluxDB cluster.
+###
+
+[meta]
+  # Where the metadata/raft database is stored
+  dir = "/var/lib/influxdb/meta"
+
+  # Automatically create a default retention policy when

creating a database.
+  # retention-autocreate = true

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # If log messages are printed for the meta service
+  # logging-enabled = true
+
+###
+### [data]
+###
+### Controls where the actual shard data for InfluxDB lives

and
how it is
+### flushed from the WAL. "dir" may need to be changed to a suitable place
+### for your system, but the WAL settings are an advanced configuration. The

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+### defaults should work for most systems.
+###
+
+[data]
+  # The directory where the TSM storage engine stores TSM

files.
+  dir = "/var/lib/influxdb/data"
+
+  # The directory where the TSM storage engine stores WAL files.
+  wal-dir = "/var/lib/influxdb/wal"
+
+  # The amount of time that a write will wait before fsyncing.
A duration
+  # greater than 0 can be used to batch up multiple fsync calls.  This is useful for slower
+  # disks or when WAL write contention is seen.  A value of 0s
fsyncs every write to the WAL.
+  # Values in the range of 0-100ms are recommended for non- SSD
disks.
+  # wal-fsync-delay = "0s"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+
+
+  # The type of shard index to use for new shards.  The

default
is an in-memory index that is
+  # recreated at startup.  A value of "tsi1" will use a disk based index that supports higher
+  # cardinality datasets.
+  # index-version = "inmem"
+
+  # Trace logging provides more verbose output around the tsm
engine. Turning
+  # this on can provide more useful output for debugging tsm engine issues.
+  # trace-logging-enabled = false
+
+  # Whether queries should be logged before execution. Very useful for troubleshooting, but will
+  # log any sensitive data contained within a query. +  # query-log-enabled = true
+
+  # Validates incoming writes to ensure keys only have valid unicode characters.
+  # This setting will incur a small overhead because every key
must be checked.
+  # validate-keys = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+
+  # Settings for the TSM engine
+
+  # CacheMaxMemorySize is the maximum size a shard's cache

can
+  # reach before it starts rejecting writes.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 =
1k).
+  # Values without a size suffix are in bytes.
+  # cache-max-memory-size = "1g"
+
+  # CacheSnapshotMemorySize is the size at which the engine will
+  # snapshot the cache and write it to a TSM file, freeing up
memory
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 =
1k).
+  # Values without a size suffix are in bytes.
+  # cache-snapshot-memory-size = "25m"
+
+  # CacheSnapshotWriteColdDuration is the length of time at +  # which the engine will snapshot the cache and write it to +  # a new TSM file if the shard hasn't received writes or deletes
+  # cache-snapshot-write-cold-duration = "10m"
+
+  # CompactFullWriteColdDuration is the duration at which the
engine
+  # will compact all TSM files in a shard if it hasn't received
a
+  # write or delete
+  # compact-full-write-cold-duration = "4h"
+
+  # The maximum number of concurrent full and level compactions
that can run at one time.  A
+  # value of 0 results in 50% of runtime.GOMAXPROCS(0) used at
runtime.  Any number greater
+  # than 0 limits compactions to that value.  This setting does
not apply
+  # to cache snapshotting.
+  # max-concurrent-compactions = 0
+
+  # CompactThroughput is the rate limit in bytes per second that
we
+  # will allow TSM compactions to write to disk. Note that short
bursts are allowed
+  # to happen at a possibly larger value, set by CompactThroughputBurst
+  # compact-throughput = "48m"
+
+  # CompactThroughputBurst is the rate limit in bytes per second
that we
+  # will allow TSM compactions to write to disk.
+  # compact-throughput-burst = "48m"
+
+  # If true, then the mmap advise value MADV_WILLNEED will be
provided to the kernel with respect to
+  # TSM files. This setting has been found to be problematic on
some kernels, and defaults to off.
+  # It might help users who have slow disks in some cases. +  # tsm-use-madv-willneed = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+
+  # Settings for the inmem index
+
+  # The maximum series allowed per database before writes

are
dropped.  This limit can prevent
+  # high cardinality issues at the database level.  This limit
can be disabled by setting it to
+  # 0.
+  # max-series-per-database = 1000000
+
+  # The maximum number of tag values per tag that are allowed
before writes are dropped.  This limit
+  # can prevent high cardinality tag values from being written
to a measurement.  This limit can be
+  # disabled by setting it to 0.
+  # max-values-per-tag = 100000

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+
+  # Settings for the tsi1 index
+
+  # The threshold, in bytes, when an index write-ahead log

file
will compact
+  # into an index file. Lower sizes will cause log files to be
compacted more
+  # quickly and result in lower heap usage at the expense of write throughput.
+  # Higher sizes will be compacted less frequently, store more
series in-memory,
+  # and provide higher write throughput.
+  # Valid size suffixes are k, m, or g (case insensitive, 1024 =
1k).
+  # Values without a size suffix are in bytes.
+  # max-index-log-file-size = "1m"
+
+  # The size of the internal cache used in the TSI index to store previously
+  # calculated series results. Cached results will be returned
quickly from the cache rather
+  # than needing to be recalculated when a subsequent query with
a matching tag key/value
+  # predicate is executed. Setting this value to 0 will disable
the cache, which may
+  # lead to query performance issues.
+  # This value should only be increased if it is known that the
set of regularly used
+  # tag key/value predicates across all measurements for a database is larger than 100. An
+  # increase in cache size may lead to an increase in heap usage.
+  series-id-set-cache-size = 100

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+
+###
+### [coordinator]
+###
+### Controls the clustering service configuration.
+###
+
+[coordinator]
+  # The default time a write request will wait until a

"timeout"
error is returned to the caller.
+  # write-timeout = "10s"
+
+  # The maximum number of concurrent queries allowed to be executing at one time.  If a query is
+  # executed and exceeds this limit, an error is returned to the
caller.  This limit can be disabled
+  # by setting it to 0.
+  # max-concurrent-queries = 0
+
+  # The maximum time a query will is allowed to execute before
being killed by the system.  This limit
+  # can help prevent run away queries.  Setting the value to 0
disables the limit.
+  # query-timeout = "0s"
+
+  # The time threshold when a query will be logged as a slow query.  This limit can be set to help
+  # discover slow or resource intensive queries.  Setting the
value to 0 disables the slow query logging.
+  # log-queries-after = "0s"
+
+  # The maximum number of points a SELECT can process.  A value
of 0 will make
+  # the maximum point count unlimited.  This will only be checked every second so queries will not
+  # be aborted immediately when hitting the limit. +  # max-select-point = 0
+
+  # The maximum number of series a SELECT can run.  A value of 0
will make the maximum series
+  # count unlimited.
+  # max-select-series = 0
+
+  # The maximum number of group by time bucket a SELECT can create.  A value of zero will max the maximum
+  # number of buckets unlimited.
+  # max-select-buckets = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [retention]
+###
+### Controls the enforcement of retention policies for

evicting
old data.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +7 -0
+###
+
+[retention]
+  # Determines whether retention policy enforcement enabled.
+  # enabled = true
+
+  # The interval of time when retention policy enforcement

checks run.
+  # check-interval = "30m"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [shard-precreation]
+###
+### Controls the precreation of shards, so they are

available
before data arrives.
+### Only shards that, after creation, will have both a start-
and end-time in the
+### future, will ever be created. Shards are never precreated
that would be wholly

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +4 -0
+### or partially in the past.
+
+[shard-precreation]
+  # Determines whether shard pre-creation service is

enabled.
+  # enabled = true
+
+  # The interval of time when the check to pre-create new shards
runs.
+  # check-interval = "10m"
+
+  # The default period ahead of the endtime of a shard group that its successor
+  # group is created.
+  # advance-period = "30m"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +3 -0
+
+###
+### Controls the system self-monitoring, statistics and

diagnostics.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +2 -0
+###
+### The internal database for monitoring data is created

automatically if
+### if it does not already exist. The target retention within
this database
+### is called 'monitor' and is also created with a retention period of 7 days
+### and a replication factor of 1, if it does not exist. In all
cases the
+### this retention policy is configured as the default for the
database.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +15 -0
+
+[monitor]
+  # Whether to record statistics internally.
+  # store-enabled = true
+
+  # The destination database for recorded statistics
+  # store-database = "_internal"
+
+  # The interval at which to record statistics
+  # store-interval = "10s"
+
+###
+### [http]
+###
+### Controls how the HTTP endpoints are configured. These

are
the primary

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +17 -0
+### mechanism for getting data into and out of InfluxDB.
+###
+
+[http]
+  # Determines whether HTTP endpoint is enabled.
+  # enabled = true
+
+  # Determines whether the Flux query endpoint is enabled.
+  # flux-enabled = false
+
+  # Determines whether the Flux query logging is enabled.
+  # flux-log-enabled = false
+
+  # The bind address used by the HTTP service.
+  # bind-address = ":8086"
+
+  # Determines whether user authentication is enabled over

HTTP/HTTPS.
+  # auth-enabled = false
+
+  # The default realm sent back when issuing a basic auth challenge.
+  # realm = "InfluxDB"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+  # Determines whether HTTP request logging is enabled.
+  # log-enabled = true
+
+  # Determines whether the HTTP write request logs should be

suppressed when the log is enabled.
+  # suppress-write-log = false
+
+  # When HTTP request logging is enabled, this option specifies
the path where
+  # log entries should be written. If unspecified, the default
is to write to stderr, which
+  # intermingles HTTP logs with internal InfluxDB logging. +  #
+  # If influxd is unable to access the specified path, it will
log an error and fall back to writing
+  # the request log to stderr.
+  # access-log-path = ""
+
+  # Filters which requests should be logged. Each filter is of
the pattern NNN, NNX, or NXX where N is
+  # a number and X is a wildcard for any number. To filter all
5xx responses, use the string 5xx.
+  # If multiple filters are used, then only one has to match.
The default is to have no filters which
+  # will cause every request to be printed.
+  # access-log-status-filters = []

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+  # Determines whether detailed write logging is enabled.
+  # write-tracing = false
+
+  # Determines whether the pprof endpoint is enabled.  This

endpoint is used for
+  # troubleshooting and monitoring.
+  # pprof-enabled = true
+
+  # Enables authentication on pprof endpoints. Users will need
admin permissions
+  # to access the pprof endpoints when this setting is enabled.
This setting has
+  # no effect if either auth-enabled or pprof-enabled are set to
false.
+  # pprof-auth-enabled = false
+
+  # Enables a pprof endpoint that binds to localhost:6060 immediately on startup.
+  # This is only needed to debug startup issues.
+  # debug-pprof-enabled = false
+
+  # Enables authentication on the /ping, /metrics, and deprecated /status
+  # endpoints. This setting has no effect if auth-enabled is set
to false.
+  # ping-auth-enabled = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+
+  # Determines whether HTTPS is enabled.
+  # https-enabled = false
+
+  # The SSL certificate to use when HTTPS is enabled.
+  # https-certificate = "/etc/ssl/influxdb.pem"
+
+  # Use a separate private key location.
+  # https-private-key = ""
+
+  # The JWT auth shared secret to validate requests using

JSON
web tokens.
+  # shared-secret = ""
+
+  # The default chunk size for result sets that should be chunked.
+  # max-row-limit = 0
+
+  # The maximum number of HTTP connections that may be open at
once.  New connections that
+  # would exceed this limit are dropped.  Setting this value to
0 disables the limit.
+  # max-connection-limit = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Enable http service over unix domain socket
+  # unix-socket-enabled = false
+
+  # The path of the unix domain socket.
+  # bind-socket = "/var/run/influxdb.sock"
+
+  # The maximum size of a client request body, in bytes.

Setting
this value to 0 disables the limit.
+  # max-body-size = 25000000

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +10 -0
+
+  # The maximum number of writes processed concurrently.
+  # Setting this to 0 disables the limit.
+  # max-concurrent-write-limit = 0
+
+  # The maximum number of writes queued for processing.
+  # Setting this to 0 disables the limit.
+  # max-enqueued-write-limit = 0
+
+  # The maximum duration for a write to wait in the queue to

be
processed.
+  # Setting this to 0 or setting max-concurrent-write-limit to 0
disables the limit.
+  # enqueued-write-timeout = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+
+###
+### [logging]
+###
+### Controls how the logger emits logs to the output.
+###
+
+[logging]
+  # Determines which log encoder to use for logs. Available

options
+  # are auto, logfmt, and json. auto will use a more a more user-friendly
+  # output format if the output terminal is a TTY, but the format is not as
+  # easily machine-readable. When the output is a non-TTY, auto
will use
+  # logfmt.
+  # format = "auto"
+
+  # Determines which level of logs will be emitted. The available levels
+  # are error, warn, info, and debug. Logs that are equal to or
above the
+  # specified level will be emitted.
+  # level = "info"
+
+  # Suppresses the logo output that is printed when the program
is started.
+  # The logo is always suppressed if STDOUT is not a TTY. +  # suppress-logo = false

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [subscriber]
+###
+### Controls the subscriptions, which can be used to fork a

copy
of all data

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +11 -0
+### received by the InfluxDB host.
+###
+
+[subscriber]
+  # Determines whether the subscriber service is enabled.
+  # enabled = true
+
+  # The default timeout for HTTP writes to subscribers.
+  # http-timeout = "30s"
+
+  # Allows insecure HTTPS connections to subscribers.  This

is
useful when testing with self-
+  # signed certificates.
+  # insecure-skip-verify = false
+
+  # The path to the PEM encoded CA certs file. If the empty string, the default system certs will be used
+  # ca-certs = ""
+
+  # The number of writer goroutines processing the write channel.
+  # write-concurrency = 40
+
+  # The number of in-flight writes buffered in the write channel.
+  # write-buffer-size = 1000

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +18 -0
+
+
+###
+### [[graphite]]
+###
+### Controls one or many listeners for Graphite data.
+###
+
+[[graphite]]
+  # Determines whether the graphite endpoint is enabled.
+  # enabled = false
+  # database = "graphite"
+  # retention-policy = ""
+  # bind-address = ":2003"
+  # protocol = "tcp"
+  # consistency-level = "one"
+
+  # These next lines control how batching works. You should

have
this enabled
+  # otherwise you could get dropped metrics or poor performance.
Batching
+  # will buffer points in memory if you have many coming in.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer

limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will
fail if set above OS max.
+  # udp-read-buffer = 0
+
+  ### This string joins multiple matching 'measurement' values
providing more control over the final measurement name. +  # separator = "."
+
+  ### Default tags that will be added to all metrics.  These can
be overridden at the template level
+  ### or by tags extracted from metric
+  # tags = ["region=us-east", "zone=1c"]
+
+  ### Each template line requires a template pattern.  It can
have an optional
+  ### filter before the template and separated by spaces. It
can also have optional extra
+  ### tags following the template.  Multiple tags should be separated by commas and no spaces
+  ### similar to the line protocol format.  There can be only
one default template.
+  # templates = [
+  #   "*.app env.service.resource.measurement",
+  #   # Default template
+  #   "server.*",
+  # ]

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +14 -0
+
+###
+### [collectd]
+###
+### Controls one or many listeners for collectd data.
+###
+
+[[collectd]]
+  # enabled = false
+  # bind-address = ":25826"
+  # database = "collectd"
+  # retention-policy = ""
+  #
+  # The collectd service supports either scanning a

directory
for multiple types
+  # db files, or specifying a single db file.
+  # typesdb = "/usr/local/share/collectd"
+  #
+  # security-level = "none"
+  # auth-file = "/etc/collectd/auth_file"
+
+  # These next lines control how batching works. You should have
this enabled
+  # otherwise you could get dropped metrics or poor performance.
Batching
+  # will buffer points in memory if you have many coming in.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Flush at least this often even if we haven't hit buffer

limit
+  # batch-timeout = "10s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will
fail if set above OS max.
+  # read-buffer = 0
+
+  # Multi-value plugins can be handled two ways.
+  # "split" will parse and store the multi-value plugin data into separate measurements
+  # "join" will parse and store the multi-value plugin as a single multi-value measurement.
+  # "split" is the default behavior for backward compatibility
with previous versions of influxdb.
+  # parse-multivalue-plugin = "split"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +19 -0
+###
+### [opentsdb]
+###
+### Controls one or many listeners for OpenTSDB data.
+###
+
+[[opentsdb]]
+  # enabled = false
+  # bind-address = ":4242"
+  # database = "opentsdb"
+  # retention-policy = ""
+  # consistency-level = "one"
+  # tls-enabled = false
+  # certificate= "/etc/ssl/influxdb.pem"
+
+  # Log an error for every malformed point.
+  # log-point-errors = true
+
+  # These next lines control how batching works. You should

have
this enabled
+  # otherwise you could get dropped metrics or poor performance.
Only points
+  # metrics received over the telnet protocol undergo batching.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 1000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 5
+
+  # Flush at least this often even if we haven't hit buffer

limit
+  # batch-timeout = "1s"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +5 -0
+
+###
+### [[udp]]
+###
+### Controls the listeners for InfluxDB line protocol data

via
UDP.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+###
+
+[[udp]]
+  # enabled = false
+  # bind-address = ":8089"
+  # database = "udp"
+  # retention-policy = ""
+
+  # InfluxDB precision for timestamps on received points (""

or
"n", "u", "ms", "s", "m", "h")
+  # precision = ""
+
+  # These next lines control how batching works. You should have
this enabled
+  # otherwise you could get dropped metrics or poor performance.
Batching
+  # will buffer points in memory if you have many coming in.

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +8 -0
+
+  # Flush if this many points get buffered
+  # batch-size = 5000
+
+  # Number of batches that may be pending in memory
+  # batch-pending = 10
+
+  # Will flush at least this often even if we haven't hit

buffer
limit
+  # batch-timeout = "1s"
+
+  # UDP Read buffer size, 0 means OS default. UDP listener will
fail if set above OS max.
+  # read-buffer = 0

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+
+###
+### [continuous_queries]
+###
+### Controls how continuous queries are run within InfluxDB.
+###
+
+[continuous_queries]
+  # Determines whether the continuous query service is

enabled.
+  # enabled = true
+
+  # Controls whether queries are logged when executed by the CQ
service.
+  # log-enabled = true
+
+  # Controls whether queries are logged to the self- monitoring
data store.
+  # query-stats-enabled = false
+
+  # interval for how often continuous queries will be checked if
they need to run
+  # run-interval = "1s"

meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file +9 -0
+
+###
+### [tls]
+###
+### Global configuration settings for TLS in InfluxDB.
+###
+
+[tls]
+  # Determines the available set of cipher suites. See

https://golang.org/pkg/crypto/tls/#pkg-constants
+  # for a list of available ciphers, which depends on the version of Go (use the query
+  # SHOW DIAGNOSTICS to see the version of Go used to build InfluxDB). If not specified, uses
+  # the default settings from Go's crypto/tls package. +  # ciphers = [
+  #   "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305",
+  #   "TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305",
+  # ]
+
+  # Minimum version of the tls protocol that will be negotiated.
If not specified, uses the
+  # default settings from Go's crypto/tls package. +  # min-version = "tls1.2"
+
+  # Maximum version of the tls protocol that will be negotiated.
If not specified, uses the
+  # default settings from Go's crypto/tls package. +  # max-version = "tls1.3"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +1 -0
new file mode 100644
index 000000000..4f2bb78b2
@@ -0,0 +1,63 @@
+DESCRIPTION = "InfluxDB is a time series database designed

to
handle high write and query loads."
+HOMEPAGE = "
https://www.influxdata.com/products/influxdb-overview/"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +3 -0
+
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "

file://src/${GO_IMPORT}/LICENSE;md5=ba8146ad9cc2a128209983265136e06a "

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +15 -0
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+RDEPENDS_${PN} = "bash"
+RDEPENDS_${PN}-dev = "bash"
+
+GO_IMPORT = "github.com/influxdata/influxdb"
+
+GO_INSTALL = "\
+    ${GO_IMPORT}/cmd/influx \
+    ${GO_IMPORT}/cmd/influxd \
+"
+
+SRC_URI = "\
+

git://${GO_IMPORT};protocol=https;branch=1.7;destsuffix=${BPN
}-
${PV}/src/${GO_IMPORT} \
+    file://influxdb \
+    file://influxdb.conf \
+"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +7 -0
+
+SRCREV = "c958f436b2e538a88a7815aad721c7774a0b8f63"
+
+inherit go-mod systemd update-rc.d useradd
+
+USERADD_PACKAGES = "${PN}"
+USERADD_PARAM_${PN} = "--system -d /var/lib/influxdb -m -s

/bin/nologin influxdb"

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +10 -0
+
+do_install_prepend() {
+    rm ${B}/src/${GO_IMPORT}/build.py
+    rm ${B}/src/${GO_IMPORT}/build.sh
+    rm ${B}/src/${GO_IMPORT}/Dockerfile*
+}
+
+do_install_append() {
+    install -d ${D}${sysconfdir}/influxdb
+    install -m 0644 ${WORKDIR}/influxdb.conf

${D}${sysconfdir}/influxdb
+    chown -R root.influxdb ${D}${sysconfdir}/influxdb +
+    install -d ${D}${sysconfdir}/init.d
+    install -m 0755 ${WORKDIR}/influxdb ${D}${sysconfdir}/init.d/influxdb
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'sysvinit', d)}"
] ; then
+        install -d ${D}${sysconfdir}/logrotate.d +        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/logrotate ${D}${sysconfdir}/logrotate.d/influxdb
+    fi
+
+    if [ "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}"
] ; then
+        install -d ${D}${systemd_unitdir}/system +        install -m 0644 ${S}/src/${GO_IMPORT}/scripts/influxdb.service ${D}${systemd_system_unitdir}/influxdb.service
+    fi

meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +7 -0
+
+    # TODO chown
+}
+
+INITSCRIPT_PACKAGES = "${PN}"
+INITSCRIPT_NAME = "influxdb"
+INITSCRIPT_PARAMS = "defaults"
Quoted 11 lines
Quoted 8 lines
Quoted 8 lines
meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file +2 -1
+
+SYSTEMD_SERVICE_${PN} = "influxdb.service"
--

2.29.2

--
Thomas Perrot, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Signature · 3 lines
Thomas Perrot, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com