Skip to contentSkip to conversation

Add AVF & DCF VLAN feaure

PATCH Superseded Haiyue Wang 3 participants 32 messages Dec 14, 2020 – Jan 12, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover Add AVF & DCF VLAN feaure

Add new VLAN feature, which has rich settings.

Haiyue Wang (5):
common/iavf: new VLAN opcode
net/iavf: support Ethernet CRC strip disable
net/ice: enable QinQ filter for switch
net/ice: add DCF port representor
net/iavf: support new VLAN virtchnl opcodes

 drivers/common/iavf/virtchnl.h           | 229 +++++++++++++++
 drivers/net/iavf/iavf.h                  |   6 +
 drivers/net/iavf/iavf_ethdev.c           |  49 ++++
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 150 +++++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/ice_generic_flow.c       |   8 +
 drivers/net/ice/ice_generic_flow.h       |   1 +
 drivers/net/ice/ice_switch_filter.c      | 104 ++++++-
 drivers/net/ice/meson.build              |   1 +
 13 files changed, 1002 insertions(+), 20 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
Signature · 1 line
2.29.2
#1 lore raw

PATCH v2 1/5 common/iavf: new VLAN opcode

Add new VLAN opcode support.

---
 drivers/common/iavf/virtchnl.h | 229 +++++++++++++++++++++++++++++++++
 1 file changed, 229 insertions(+)
drivers/common/iavf/virtchnl.h +229 -0
index b931da61e..445d04d53 100644
@@ -129,6 +129,7 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
 	VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
 	/* opcodes 34, 35, 36, 37 and 38 are reserved */
+	VIRTCHNL_OP_DCF_VLAN_OFFLOAD = 38,
 	VIRTCHNL_OP_DCF_CMD_DESC = 39,
 	VIRTCHNL_OP_DCF_CMD_BUFF = 40,
 	VIRTCHNL_OP_DCF_DISABLE = 41,
@@ -141,6 +142,11 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_DEL_FDIR_FILTER = 48,
 	VIRTCHNL_OP_QUERY_FDIR_FILTER = 49,
 	VIRTCHNL_OP_GET_MAX_RSS_QREGION = 50,
+	VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51,
+	VIRTCHNL_OP_ADD_VLAN_V2 = 52,
+	VIRTCHNL_OP_DEL_VLAN_V2 = 53,
+	VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54,
+	VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55,
 	VIRTCHNL_OP_ENABLE_QUEUES_V2 = 107,
 	VIRTCHNL_OP_DISABLE_QUEUES_V2 = 108,
 	VIRTCHNL_OP_MAP_QUEUE_VECTOR = 111,
@@ -251,6 +257,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
 #define VIRTCHNL_VF_OFFLOAD_CRC			0x00000080
 	/* 0X00000100 is reserved */
 #define VIRTCHNL_VF_LARGE_NUM_QPAIRS		0x00000200
+#define VIRTCHNL_VF_OFFLOAD_VLAN_V2		0x00008000
 #define VIRTCHNL_VF_OFFLOAD_VLAN		0x00010000
 #define VIRTCHNL_VF_OFFLOAD_RX_POLLING		0x00020000
 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000
@@ -536,6 +543,202 @@ struct virtchnl_vlan_filter_list {
 
 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
 
+/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related
+ * structures and opcodes.
+ *
+ * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver
+ * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported
+ * by the PF concurrently. For example, if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it
+ * would OR the following in the virtchnl_vlan_filtering_caps.outer field:
+ *
+ * 	VIRTHCNL_VLAN_ETHERTYPE_8100 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_AND;
+ *
+ * The VF would interpret this as VLAN filtering can be supported on both 0x8100
+ * and 0x88A8 VLAN ethertypes.
+ *
+ * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported
+ * by the PF concurrently. For example if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping
+ * offload it would OR the following in the
+ * virtchnl_vlan_offload_caps.outer_stripping field:
+ *
+ * 	VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_XOR;
+ *
+ * The VF would interpret this as VLAN stripping can be supported on either
+ * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override
+ * the previously set value.
+ *
+ * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for
+ * VLAN filtering if the underlying PF supports it.
+ *
+ * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a
+ * certain VLAN capability can be toggled. For example if the underlying PF/CP
+ * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should
+ * set this bit along with the supported ethertypes.
+ */
+enum virtchnl_vlan_support {
+	VIRTCHNL_VLAN_UNSUPPORTED =	0,
+	VIRTCHNL_VLAN_ETHERTYPE_8100 =	0x0001,
+	VIRTCHNL_VLAN_ETHERTYPE_88A8 =	0x0002,
+	VIRTCHNL_VLAN_ETHERTYPE_9100 =	0x0004,
+	VIRTCHNL_VLAN_PRIO =		0x0100,
+	VIRTCHNL_VLAN_FILTER_MASK =	0x1000,
+	VIRTCHNL_VLAN_ETHERTYPE_AND =	0x2000,
+	VIRTCHNL_VLAN_ETHERTYPE_XOR =	0x4000,
+	VIRTCHNL_VLAN_TOGGLE =		0x8000,
+};
+
+/* The PF populates these fields based on the supported VLAN filtering. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using
+ * the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN filtering setting if the
+ * VIRTCHNL_VFLAN_TOGGLE_ALLOWED bit is set.
+ *
+ * The max_filters field tells the VF how many VLAN filters it's allowed to have
+ * at any one time. If it exceeds this amount and tries to add another filter,
+ * then the request will be rejected by the PF.
+ */
+struct virtchnl_vlan_filtering_caps {
+	u16 outer;
+	u16 inner;
+	u16 max_filters;
+	u8 pad[4];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(10, virtchnl_vlan_filtering_caps);
+
+/* This enum is used for the virtchnl_vlan_offload_caps structure to specify
+ * if the PF supports a different ethertype for stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified
+ * for stripping affect the ethertype(s) sepcified for insertion and visa versa
+ * as well. If the VF tries to configure VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then
+ * that will be the ethertype for both stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for
+ * stripping do not affect the ethertype(s) specified for insertion and visa
+ * versa.
+ */
+enum virtchnl_vlan_ethertype_match {
+	VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0,
+	VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,
+};
+
+/* The PF populates these fields based on the supported VLAN offloads. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN offload setting if the
+ * VIRTCHNL_VFLAN_TOGGLE_ALLOWED bit is set.
+ *
+ * The VF driver needs to be aware of how the tags are stipped by hardware and
+ * inserted by the VF driver based on the level of offload support.
+ *
+ * outer_stripping supported - VLAN tag stripped into L2TAG2 field by hardware
+ * outer_insertion supported - VLAN tag inserted into L2TAG2 field by VF driver
+ *
+ * inner_stripping supported - VLAN tag stripped into L2TAG1 field by hardware
+ * inner_insertion supported - VLAN tag inserted into L2TAG1 field by VF driver
+ */
+struct virtchnl_vlan_offload_caps {
+	u16 outer_stripping;
+	u16 inner_stripping;
+	u16 outer_insertion;
+	u16 inner_insertion;
+	u16 ethertype_init;
+	u8 ethertype_match;
+	u8 pad[3];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_vlan_offload_caps);
+
+/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
+ * VF sends this message to determine its VLAN capabilities.
+ *
+ * PF will mark which capabilities it supports based on hardware support and
+ * current configuration. For example, if a port VLAN is configured the PF will
+ * not allow outer VLAN filtering, stripping, or insertion to be configured so
+ * it will block these features from the VF.
+ *
+ * The VF will need to cross reference its capabilities with the PFs
+ * capabilities in the response message from the PF to determine the VLAN
+ * support.
+ */
+struct virtchnl_vlan_caps {
+	struct virtchnl_vlan_filtering_caps filtering;
+	struct virtchnl_vlan_offload_caps offloads;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_caps);
+
+struct virtchnl_vlan {
+	u16 tci;	/* tci[15:13] = PCP and tci[11:0] = VID */
+	u16 tci_mask;	/* only valid if VIRTCHNL_VLAN_FILTER_MASK set in filtering caps */
+	u16 tpid;	/* 0x8100, 0x88a8, etc. and only type(s) set in filtering caps */
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
+
+struct virtchnl_vlan_filter {
+	struct virtchnl_vlan inner;
+	struct virtchnl_vlan outer;
+	u8 pad[16];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
+
+/* VIRTCHNL_OP_ADD_VLAN_V2
+ * VIRTCHNL_OP_DEL_VLAN_V2
+ *
+ * VF sends these messages to add/del one or more VLAN tag filters for Rx traffic.
+ *
+ * The PF/CP attempts to add the filters and returns status.
+ *
+ * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the
+ * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
+ */
+struct virtchnl_vlan_filter_list_v2 {
+	u16 vport_id;
+	u16 num_elements;
+	u8 pad[4];
+	struct virtchnl_vlan_filter filters[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2);
+
+/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2
+ *
+ * VF sends this message to enable or disable VLAN stripping. It also needs to
+ * specify an ethertype. The VF knows which virtchnl_vlan_filter fields are
+ * allowed via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message.
+ */
+struct virtchnl_vlan_strip {
+	u16 vsi_id;
+	u16 outer_ethertype_setting;	/* 0x8100, 0x88a8, etc. and only type(s) set in the offload caps */
+	u16 inner_ethertype_setting;	/* 0x8100, 0x88a8, etc. and only type(s) set in the offload caps */
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan_strip);
+
 /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
  * VF sends VSI id and flags.
  * PF returns status code in retval.
@@ -754,6 +957,32 @@ struct virtchnl_pkg_info {
 
 VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_pkg_info);
 
+struct virtchnl_dcf_vlan_offload {
+	u16 vf_id;
+	u16 tpid;
+	u16 vlan_flags;
+#define VIRTCHNL_DCF_VLAN_TYPE_S		0
+#define VIRTCHNL_DCF_VLAN_TYPE_M		\
+			(0x1 << VIRTCHNL_DCF_VLAN_TYPE_S)
+#define VIRTCHNL_DCF_VLAN_TYPE_INNER		0x0
+#define VIRTCHNL_DCF_VLAN_TYPE_OUTER		0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_S		1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_M	\
+			(0x7 << VIRTCHNL_DCF_VLAN_INSERT_MODE_S)
+#define VIRTCHNL_DCF_VLAN_INSERT_DISABLE	0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_PORT_BASED	0x2
+#define VIRTCHNL_DCF_VLAN_INSERT_VIA_TX_DESC	0x3
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_S		4
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_M		\
+			(0x7 << VIRTCHNL_DCF_VLAN_STRIP_MODE_S)
+#define VIRTCHNL_DCF_VLAN_STRIP_DISABLE		0x1
+#define VIRTCHNL_DCF_VLAN_STRIP_ONLY		0x2
+#define VIRTCHNL_DCF_VLAN_STRIP_INTO_RX_DESC	0x3
+	u16 vlan_id;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_dcf_vlan_offload);
+
 struct virtchnl_supported_rxdids {
 	u64 supported_rxdids;
 };
Signature · 1 line
2.29.2
#2 lore raw

PATCH v2 2/5 net/iavf: support Ethernet CRC strip disable

In reply to Haiyue Wang

The VF will check the PF's CRC strip capability firstly, then set the 'CRC strip disable' value in the queue configuration according to the RX CRC offload setting.

---
 drivers/net/iavf/iavf_ethdev.c | 3 +++
 drivers/net/iavf/iavf_rxtx.c   | 6 +++++-
 drivers/net/iavf/iavf_vchnl.c  | 3 ++-
 3 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/iavf/iavf_ethdev.c +3 -0
index 7e3c26a94..0fd06e4b4 100644
@@ -795,6 +795,9 @@ iavf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		DEV_TX_OFFLOAD_MULTI_SEGS |
 		DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_CRC)
+		dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_KEEP_CRC;
+
 	dev_info->default_rxconf = (struct rte_eth_rxconf) {
 		.rx_free_thresh = IAVF_DEFAULT_RX_FREE_THRESH,
 		.rx_drop_en = 0,
drivers/net/iavf/iavf_rxtx.c +5 -1
index 21d508b3f..d53d7b984 100644
@@ -550,11 +550,15 @@ iavf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 	rxq->rx_free_thresh = rx_free_thresh;
 	rxq->queue_id = queue_idx;
 	rxq->port_id = dev->data->port_id;
-	rxq->crc_len = 0; /* crc stripping by default */
 	rxq->rx_deferred_start = rx_conf->rx_deferred_start;
 	rxq->rx_hdr_len = 0;
 	rxq->vsi = vsi;
 
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+		rxq->crc_len = RTE_ETHER_CRC_LEN;
+	else
+		rxq->crc_len = 0;
+
 	len = rte_pktmbuf_data_room_size(rxq->mp) - RTE_PKTMBUF_HEADROOM;
 	rxq->rx_buf_len = RTE_ALIGN(len, (1 << IAVF_RXQ_CTX_DBUFF_SHIFT));
 
drivers/net/iavf/iavf_vchnl.c +2 -1
index 33d03af65..3f949c9e3 100644
@@ -458,6 +458,7 @@ iavf_get_vf_resource(struct iavf_adapter *adapter)
 		VIRTCHNL_VF_OFFLOAD_FDIR_PF |
 		VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF |
 		VIRTCHNL_VF_OFFLOAD_REQ_QUEUES |
+		VIRTCHNL_VF_OFFLOAD_CRC |
 		VIRTCHNL_VF_LARGE_NUM_QPAIRS;
 
 	args.in_args = (uint8_t *)&caps;
@@ -851,7 +852,7 @@ iavf_configure_queues(struct iavf_adapter *adapter,
 		vc_qp->rxq.ring_len = rxq[i]->nb_rx_desc;
 		vc_qp->rxq.dma_ring_addr = rxq[i]->rx_ring_phys_addr;
 		vc_qp->rxq.databuffer_size = rxq[i]->rx_buf_len;
-
+		vc_qp->rxq.crc_disable = rxq[i]->crc_len != 0 ? 1 : 0;
 #ifndef RTE_LIBRTE_IAVF_16BYTE_RX_DESC
 		if (vf->vf_res->vf_cap_flags &
 		    VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC &&
Signature · 1 line
2.29.2
#3 lore raw

PATCH v2 3/5 net/ice: enable QinQ filter for switch

In reply to Haiyue Wang

Enable the double VLAN support for QinQ filter switch.

---
 drivers/net/ice/ice_generic_flow.c  |   8 +++
 drivers/net/ice/ice_generic_flow.h  |   1 +
 drivers/net/ice/ice_switch_filter.c | 104 +++++++++++++++++++++++++---
 3 files changed, 102 insertions(+), 11 deletions(-)
drivers/net/ice/ice_generic_flow.c +8 -0
index 1429cbc3b..1712d3b2e 100644
@@ -1455,6 +1455,14 @@ enum rte_flow_item_type pattern_eth_qinq_pppoes[] = {
 	RTE_FLOW_ITEM_TYPE_PPPOES,
 	RTE_FLOW_ITEM_TYPE_END,
 };
+enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[] = {
+	RTE_FLOW_ITEM_TYPE_ETH,
+	RTE_FLOW_ITEM_TYPE_VLAN,
+	RTE_FLOW_ITEM_TYPE_VLAN,
+	RTE_FLOW_ITEM_TYPE_PPPOES,
+	RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID,
+	RTE_FLOW_ITEM_TYPE_END,
+};
 enum rte_flow_item_type pattern_eth_pppoes_ipv4[] = {
 	RTE_FLOW_ITEM_TYPE_ETH,
 	RTE_FLOW_ITEM_TYPE_PPPOES,
drivers/net/ice/ice_generic_flow.h +1 -0
index 434d2f425..dc45d8dc6 100644
@@ -426,6 +426,7 @@ extern enum rte_flow_item_type pattern_eth_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_qinq_pppoes[];
+extern enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_pppoes_ipv4[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes_ipv4[];
 extern enum rte_flow_item_type pattern_eth_qinq_pppoes_ipv4[];
drivers/net/ice/ice_switch_filter.c +93 -11

189 lines not on this page · raw message

Signature · 1 line
2.29.2
#4 lore raw

PATCH v2 4/5 net/ice: add DCF port representor

In reply to Haiyue Wang

Add the DCF port representor infrastructure for the VFs of DCF attached PF. Then the standard ethdev API can be used to configure the VFs.

The main function is VLAN related.

---
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 5 files changed, 462 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
drivers/net/ice/ice_dcf.c +1 -0
index 44dbd3bb8..4a9af3292 100644
@@ -234,6 +234,7 @@ ice_dcf_get_vf_resource(struct ice_dcf_hw *hw)
 
 	caps = VIRTCHNL_VF_OFFLOAD_WB_ON_ITR | VIRTCHNL_VF_OFFLOAD_RX_POLLING |
 	       VIRTCHNL_VF_CAP_ADV_LINK_SPEED | VIRTCHNL_VF_CAP_DCF |
+	       VIRTCHNL_VF_OFFLOAD_VLAN_V2 |
 	       VF_BASE_MODE_OFFLOADS | VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC;
 
 	err = ice_dcf_send_cmd_req_no_irq(hw, VIRTCHNL_OP_GET_VF_RESOURCES,
drivers/net/ice/ice_dcf_ethdev.c +84 -7

104 lines not on this page · raw message

drivers/net/ice/ice_dcf_ethdev.h +20 -0
index b54528bea..bd5552332 100644
@@ -22,9 +22,29 @@ struct ice_dcf_adapter {
 	struct ice_dcf_hw real_hw;
 };
 
+struct ice_dcf_vf_repr_param {
+	struct ice_dcf_adapter *adapter;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+};
+
+struct ice_dcf_vf_repr {
+	struct ice_dcf_adapter *dcf_adapter;
+	struct rte_ether_addr mac_addr;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+
+	uint16_t outer_vlan_tpid;
+	uint16_t pvid;
+	uint16_t hw_vlan_insert_pvid:1;
+};
+
 void ice_dcf_handle_pf_event_msg(struct ice_dcf_hw *dcf_hw,
 				 uint8_t *msg, uint16_t msglen);
 int ice_dcf_init_parent_adapter(struct rte_eth_dev *eth_dev);
 void ice_dcf_uninit_parent_adapter(struct rte_eth_dev *eth_dev);
 
+int ice_dcf_vf_repr_init(struct rte_eth_dev *ethdev, void *init_param);
+int ice_dcf_vf_repr_uninit(struct rte_eth_dev *ethdev);
+
 #endif /* _ICE_DCF_ETHDEV_H_ */
drivers/net/ice/ice_dcf_vf_representor.c new file +356 -0

356 lines not on this page · raw message

drivers/net/ice/meson.build +1 -0
index 7b291269d..d58936089 100644
@@ -61,6 +61,7 @@ if arch_subdir == 'x86'
 endif
 
 sources += files('ice_dcf.c',
+		 'ice_dcf_vf_representor.c',
 		 'ice_dcf_ethdev.c',
 		 'ice_dcf_parent.c')
 
Signature · 1 line
2.29.2
#5 lore raw

PATCH v2 5/5 net/iavf: support new VLAN virtchnl opcodes

In reply to Haiyue Wang

The new VLAN virtchnl opcodes introduce rich capabilities setting like outer/inner different TPIDs.

---
 drivers/net/iavf/iavf.h        |   6 ++
 drivers/net/iavf/iavf_ethdev.c |  46 +++++++++++
 drivers/net/iavf/iavf_vchnl.c  | 147 +++++++++++++++++++++++++++++++++
 3 files changed, 199 insertions(+)
drivers/net/iavf/iavf.h +6 -0
index 6d5912d8c..c57ad6175 100644
@@ -132,6 +132,7 @@ struct iavf_info {
 	struct virtchnl_version_info virtchnl_version;
 	struct virtchnl_vf_resource *vf_res; /* VF resource */
 	struct virtchnl_vsi_resource *vsi_res; /* LAN VSI */
+	struct virtchnl_vlan_caps vlan_v2_caps;
 	uint64_t supported_rxdid;
 	uint8_t *proto_xtr; /* proto xtr type for all queues */
 	volatile enum virtchnl_ops pend_cmd; /* pending command not finished */
@@ -288,7 +289,9 @@ int iavf_check_api_version(struct iavf_adapter *adapter);
 int iavf_get_vf_resource(struct iavf_adapter *adapter);
 void iavf_handle_virtchnl_msg(struct rte_eth_dev *dev);
 int iavf_enable_vlan_strip(struct iavf_adapter *adapter);
+int iavf_enable_vlan_strip_v2(struct iavf_adapter *adapter);
 int iavf_disable_vlan_strip(struct iavf_adapter *adapter);
+int iavf_disable_vlan_strip_v2(struct iavf_adapter *adapter);
 int iavf_switch_queue(struct iavf_adapter *adapter, uint16_t qid,
 		     bool rx, bool on);
 int iavf_switch_queue_lv(struct iavf_adapter *adapter, uint16_t qid,
@@ -302,6 +305,7 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter);
 int iavf_configure_queues(struct iavf_adapter *adapter,
 			uint16_t num_queue_pairs, uint16_t index);
 int iavf_get_supported_rxdid(struct iavf_adapter *adapter);
+int iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter);
 int iavf_config_irq_map(struct iavf_adapter *adapter);
 int iavf_config_irq_map_lv(struct iavf_adapter *adapter, uint16_t num,
 			uint16_t index);
@@ -315,6 +319,8 @@ int iavf_config_promisc(struct iavf_adapter *adapter, bool enable_unicast,
 int iavf_add_del_eth_addr(struct iavf_adapter *adapter,
 			 struct rte_ether_addr *addr, bool add);
 int iavf_add_del_vlan(struct iavf_adapter *adapter, uint16_t vlanid, bool add);
+int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t vlanid,
+			 bool add);
 int iavf_fdir_add(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);
 int iavf_fdir_del(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);
 int iavf_fdir_check(struct iavf_adapter *adapter,
drivers/net/iavf/iavf_ethdev.c +46 -0

76 lines not on this page · raw message

drivers/net/iavf/iavf_vchnl.c +147 -0

183 lines not on this page · raw message

Signature · 1 line
2.29.2
#6 lore raw

Re: [dpdk-dev] [PATCH v2 5/5] net/iavf: support new VLAN virtchnl opcodes

Quoted 164 lines

-----Original Message-----
From: Wang, Haiyue <[email protected]>
Sent: Monday, December 14, 2020 15:12
To: [email protected]
Cc: Yang, Qiming <[email protected]>; Wu, Jingjing <[email protected]>; Zhang, Qi Z <[email protected]>; Wang, Haiyue <[email protected]>; Xing, Beilei <[email protected]>
Subject: [PATCH v2 5/5] net/iavf: support new VLAN virtchnl opcodes

The new VLAN virtchnl opcodes introduce rich capabilities setting like outer/inner different TPIDs.

---
 drivers/net/iavf/iavf.h        |   6 ++
 drivers/net/iavf/iavf_ethdev.c |  46 +++++++++++
drivers/net/iavf/iavf_vchnl.c  | 147 +++++++++++++++++++++++++++++++++
 3 files changed, 199 insertions(+)
drivers/net/iavf/iavf.h index renamed from drivers/net/iavf/iavf.h +0 -0

6d5912d8c..c57ad6175 100644

drivers/net/iavf/iavf.h +1 -0
@@ -132,6 +132,7 @@ struct iavf_info {
 	struct virtchnl_version_info virtchnl_version;
 	struct virtchnl_vf_resource *vf_res; /* VF resource */
 	struct virtchnl_vsi_resource *vsi_res; /* LAN VSI */
+	struct virtchnl_vlan_caps vlan_v2_caps;
 	uint64_t supported_rxdid;
 	uint8_t *proto_xtr; /* proto xtr type for all queues */
 	volatile enum virtchnl_ops pend_cmd; /* pending command not

finished */ @@ -288,7 +289,9 @@ int iavf_check_api_version(struct iavf_adapter *adapter); int iavf_get_vf_resource(struct iavf_adapter *adapter); void iavf_handle_virtchnl_msg(struct rte_eth_dev *dev); int iavf_enable_vlan_strip(struct iavf_adapter *adapter);

drivers/net/iavf/iavf.h +2 -0
+int iavf_enable_vlan_strip_v2(struct iavf_adapter *adapter);
 int iavf_disable_vlan_strip(struct iavf_adapter *adapter);
+int iavf_disable_vlan_strip_v2(struct iavf_adapter *adapter);
 int iavf_switch_queue(struct iavf_adapter *adapter, uint16_t qid,
 		     bool rx, bool on);
 int iavf_switch_queue_lv(struct iavf_adapter *adapter, uint16_t qid, @@ -

302,6 +305,7 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter); int iavf_configure_queues(struct iavf_adapter *adapter,
uint16_t num_queue_pairs, uint16_t index); int
iavf_get_supported_rxdid(struct iavf_adapter *adapter);
+int iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter);
int iavf_config_irq_map(struct iavf_adapter *adapter); int
iavf_config_irq_map_lv(struct iavf_adapter *adapter, uint16_t num,

drivers/net/iavf/iavf.h +0 -0
 			uint16_t index);
@@ -315,6 +319,8 @@ int iavf_config_promisc(struct iavf_adapter *adapter,

bool enable_unicast, int iavf_add_del_eth_addr(struct iavf_adapter *adapter,
struct rte_ether_addr *addr, bool add); int
iavf_add_del_vlan(struct iavf_adapter *adapter, uint16_t vlanid, bool add);

drivers/net/iavf/iavf.h +2 -0
+int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t vlanid,
+			 bool add);
 int iavf_fdir_add(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);

int iavf_fdir_del(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter); int iavf_fdir_check(struct iavf_adapter *adapter, diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c index 0fd06e4b4..4d946013c 100644

drivers/net/iavf/iavf_ethdev.c +8 -0
@@ -384,6 +384,14 @@ iavf_dev_configure(struct rte_eth_dev *dev)
 		vf->max_rss_qregion = IAVF_MAX_NUM_QUEUES_DFLT;
 	}
 
+	/* Vlan stripping setting v2 */
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2) {
+		if (dev_conf->rxmode.offloads &
 DEV_RX_OFFLOAD_VLAN_STRIP)
+			iavf_enable_vlan_strip_v2(ad);
+		else
+			iavf_disable_vlan_strip_v2(ad);
+	}
+
 	/* Vlan stripping setting */
 	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN) {

if (dev_conf->rxmode.offloads &
DEV_RX_OFFLOAD_VLAN_STRIP) @@ -992,6 +1000,13 @@ iavf_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)

drivers/net/iavf/iavf_ethdev.c +38 -0
 	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
 	int err;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2) {
+		err = iavf_add_del_vlan_v2(adapter, vlan_id, on);
+		if (err)
+			return -EIO;
+		return 0;
+	}
+
 	if (!(vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
 		return -ENOTSUP;
@@ -1001,6 +1016,27 @@ iavf_dev_vlan_filter_set(struct rte_eth_dev *dev,
 uint16_t vlan_id, int on)
 	return 0;
 }
 
+static int
+iavf_dev_vlan_offload_set_v2(struct rte_eth_dev *dev, int mask) {
+	struct iavf_adapter *adapter =
+		IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
+	int err;
+
+	if (mask & ETH_VLAN_STRIP_MASK) {
+		if (dev_conf->rxmode.offloads &
 DEV_RX_OFFLOAD_VLAN_STRIP)
+			err = iavf_enable_vlan_strip_v2(adapter);
+		else
+			err = iavf_disable_vlan_strip_v2(adapter);
+
+		if (err)
+			return -EIO;
+	}
+
+	return 0;
+}
+
 static int
 iavf_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask)  { @@ -1010,6
+1046,9 @@ iavf_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
 	int err;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2)
+		return iavf_dev_vlan_offload_set_v2(dev, mask);
+
 	if (!(vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
 		return -ENOTSUP;
@@ -1861,6 +1900,13 @@ iavf_init_vf(struct rte_eth_dev *dev)
 		}
 	}
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2) {
+		if (iavf_get_vlan_offload_caps_v2(adapter) != 0) {
+			PMD_INIT_LOG(ERR, "failed to do get VLAN offload
 v2 capabilities");
+			goto err_rss;
+		}
+	}
+
 	iavf_init_proto_xtr(dev);
 
drivers/net/iavf/iavf_ethdev.c +0 -0
 	return 0;
drivers/net/iavf/iavf_vchnl.c index renamed from drivers/net/iavf/iavf_vchnl.c +0 -0

3f949c9e3..6b571924f 100644

drivers/net/iavf/iavf_vchnl.c +1 -0
@@ -174,6 +174,7 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter,
 struct iavf_cmd_info *args)
 	case VIRTCHNL_OP_VERSION:
 	case VIRTCHNL_OP_GET_VF_RESOURCES:
 	case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
+	case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
 		/* for init virtchnl ops, need to poll the response */
 		do {

result = iavf_read_msg_from_pf(adapter, args-

Quoted 1 line

out_size, @@ -366,6 +367,45 @@ iavf_enable_vlan_strip(struct

iavf_adapter *adapter)

drivers/net/iavf/iavf_vchnl.c iavf_enable_vlan_strip(struct iavf_adapter *adapter)

Quoted 5 lines
drivers/net/iavf/iavf_vchnl.c +2 -0
 	return ret;
 }
 
+int
+iavf_enable_vlan_strip_v2(struct iavf_adapter *adapter) {

Why we don't use one function to implement vlan strip v2? iavf_switch_vlan_strip_v2(struct iavf_adapter *adapter, bool on) args.ops = on ? VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2

		   : VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2;
Quoted 42 lines
drivers/net/iavf/iavf_vchnl.c +9 -0
+	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
+	struct virtchnl_vlan_offload_caps *offload_caps;
+	struct virtchnl_vlan_strip vlan_strip;
+	struct iavf_cmd_info args;
+	bool outer;
+	int ret;
+
+	offload_caps = &vf->vlan_v2_caps.offloads;
+	if (offload_caps->outer_stripping &

VIRTCHNL_VLAN_ETHERTYPE_8100)

drivers/net/iavf/iavf_vchnl.c +2 -0
+		outer = true;
+	else if (offload_caps->inner_stripping &

VIRTCHNL_VLAN_ETHERTYPE_8100)

drivers/net/iavf/iavf_vchnl.c +26 -0
+		outer = false;
+	else
+		return -ENOTSUP;
+
+	memset(&vlan_strip, 0, sizeof(vlan_strip));
+	vlan_strip.vsi_id = vf->vsi_res->vsi_id;
+	if (outer)
+		vlan_strip.outer_ethertype_setting =
+					VIRTCHNL_VLAN_ETHERTYPE_8100;
+	else
+		vlan_strip.inner_ethertype_setting =
+					VIRTCHNL_VLAN_ETHERTYPE_8100;
+
+	args.ops = VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2;
+	args.in_args = (uint8_t *)&vlan_strip;
+	args.in_args_size = sizeof(vlan_strip);
+	args.out_buffer = vf->aq_resp;
+	args.out_size = IAVF_AQ_BUF_SZ;
+	ret = iavf_execute_vf_cmd(adapter, &args);
+	if (ret)
+		PMD_DRV_LOG(ERR, "fail to execute command
+VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2");
+
+	return ret;
+}
+
 int
 iavf_disable_vlan_strip(struct iavf_adapter *adapter)  { @@ -387,6 +427,45

@@ iavf_disable_vlan_strip(struct iavf_adapter *adapter)

drivers/net/iavf/iavf_vchnl.c iavf_enable_vlan_strip(struct iavf_adapter *adapter)

Quoted 5 lines
drivers/net/iavf/iavf_vchnl.c +2 -0
 	return ret;
 }
 
+int
+iavf_disable_vlan_strip_v2(struct iavf_adapter *adapter) {

Same comment.

Quoted 136 lines
drivers/net/iavf/iavf_vchnl.c +9 -0
+	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
+	struct virtchnl_vlan_offload_caps *offload_caps;
+	struct virtchnl_vlan_strip vlan_strip;
+	struct iavf_cmd_info args;
+	bool outer;
+	int ret;
+
+	offload_caps = &vf->vlan_v2_caps.offloads;
+	if (offload_caps->outer_stripping &

VIRTCHNL_VLAN_ETHERTYPE_8100)

drivers/net/iavf/iavf_vchnl.c +2 -0
+		outer = true;
+	else if (offload_caps->inner_stripping &

VIRTCHNL_VLAN_ETHERTYPE_8100)

drivers/net/iavf/iavf_vchnl.c +51 -0
+		outer = false;
+	else
+		return -ENOTSUP;
+
+	memset(&vlan_strip, 0, sizeof(vlan_strip));
+	vlan_strip.vsi_id = vf->vsi_res->vsi_id;
+	if (outer)
+		vlan_strip.outer_ethertype_setting =
+					VIRTCHNL_VLAN_ETHERTYPE_8100;
+	else
+		vlan_strip.inner_ethertype_setting =
+					VIRTCHNL_VLAN_ETHERTYPE_8100;
+
+	args.ops = VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2;
+	args.in_args = (uint8_t *)&vlan_strip;
+	args.in_args_size = sizeof(vlan_strip);
+	args.out_buffer = vf->aq_resp;
+	args.out_size = IAVF_AQ_BUF_SZ;
+	ret = iavf_execute_vf_cmd(adapter, &args);
+	if (ret)
+		PMD_DRV_LOG(ERR, "fail to execute command
+VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2");
+
+	return ret;
+}
+
 #define VIRTCHNL_VERSION_MAJOR_START 1
 #define VIRTCHNL_VERSION_MINOR_START 1
@@ -459,6 +538,7 @@ iavf_get_vf_resource(struct iavf_adapter *adapter)
 		VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF |
 		VIRTCHNL_VF_OFFLOAD_REQ_QUEUES |
 		VIRTCHNL_VF_OFFLOAD_CRC |
+		VIRTCHNL_VF_OFFLOAD_VLAN_V2 |
 		VIRTCHNL_VF_LARGE_NUM_QPAIRS;
 
 	args.in_args = (uint8_t *)&caps;
@@ -522,6 +602,31 @@ iavf_get_supported_rxdid(struct iavf_adapter
 *adapter)
 	return 0;
 }
 
+int
+iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter) {
+	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
+	struct iavf_cmd_info args;
+	int ret;
+
+	args.ops = VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS;
+	args.in_args = NULL;
+	args.in_args_size = 0;
+	args.out_buffer = vf->aq_resp;
+	args.out_size = IAVF_AQ_BUF_SZ;
+
+	ret = iavf_execute_vf_cmd(adapter, &args);
+	if (ret) {
+		PMD_DRV_LOG(ERR,
+			    "Failed to execute command of
 VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS");
+		return ret;
+	}
+
+	rte_memcpy(&vf->vlan_v2_caps, vf->aq_resp, sizeof(vf-
 >vlan_v2_caps));
+
+	return 0;
+}
+
 int
 iavf_enable_queues(struct iavf_adapter *adapter)  { @@ -1165,6 +1270,48

@@ iavf_add_del_vlan(struct iavf_adapter *adapter, uint16_t vlanid, bool add)

drivers/net/iavf/iavf_vchnl.c +30 -0
 	return err;
 }
 
+int
+iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t vlanid,
+bool add) {
+	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
+	struct virtchnl_vlan_filtering_caps *filtering_caps;
+	struct virtchnl_vlan_filter_list_v2 vlan_list;
+	struct iavf_cmd_info args;
+	bool outer;
+	int err;
+
+	filtering_caps = &vf->vlan_v2_caps.filtering;
+	if (filtering_caps->outer & VIRTCHNL_VLAN_ETHERTYPE_8100)
+		outer = true;
+	else if (filtering_caps->inner & VIRTCHNL_VLAN_ETHERTYPE_8100)
+		outer = false;
+	else
+		return -ENOTSUP;
+
+	memset(&vlan_list, 0, sizeof(vlan_list));
+	vlan_list.num_elements = 1;
+
+	if (outer) {
+		vlan_list.filters[0].outer.tci = vlanid;
+		vlan_list.filters[0].outer.tpid = RTE_ETHER_TYPE_VLAN;
+	} else {
+		vlan_list.filters[0].inner.tci = vlanid;
+		vlan_list.filters[0].inner.tpid = RTE_ETHER_TYPE_VLAN;
+	}
+
+	args.ops = add ? VIRTCHNL_OP_ADD_VLAN_V2 :

VIRTCHNL_OP_DEL_VLAN_V2;

drivers/net/iavf/iavf_vchnl.c +12 -1
+	args.in_args = (uint8_t *)&vlan_list;
+	args.in_args_size = sizeof(vlan_list);
+	args.out_buffer = vf->aq_resp;
+	args.out_size = IAVF_AQ_BUF_SZ;
+	err = iavf_execute_vf_cmd(adapter, &args);
+	if (err)
+		PMD_DRV_LOG(ERR, "fail to execute command %s",
+			    add ? "OP_ADD_VLAN_V2" :  "OP_DEL_VLAN_V2");
+
+	return err;
+}
+
 int
 iavf_fdir_add(struct iavf_adapter *adapter,
 	struct iavf_fdir_conf *filter)
--

2.29.2

#7 lore raw

Re: [dpdk-dev] [PATCH v2 5/5] net/iavf: support new VLAN virtchnl opcodes

Quoted 175 lines

-----Original Message-----
From: Yang, Qiming <[email protected]>
Sent: Tuesday, December 15, 2020 13:20
To: Wang, Haiyue <[email protected]>; [email protected]
Cc: Wu, Jingjing <[email protected]>; Zhang, Qi Z <[email protected]>; Xing, Beilei <[email protected]>
Subject: RE: [PATCH v2 5/5] net/iavf: support new VLAN virtchnl opcodes

Quoted 165 lines

-----Original Message-----
From: Wang, Haiyue <[email protected]>
Sent: Monday, December 14, 2020 15:12
To: [email protected]
Cc: Yang, Qiming <[email protected]>; Wu, Jingjing <[email protected]>; Zhang, Qi Z <[email protected]>; Wang, Haiyue <[email protected]>; Xing, Beilei <[email protected]>
Subject: [PATCH v2 5/5] net/iavf: support new VLAN virtchnl opcodes

The new VLAN virtchnl opcodes introduce rich capabilities setting like outer/inner different TPIDs.

---
 drivers/net/iavf/iavf.h        |   6 ++
 drivers/net/iavf/iavf_ethdev.c |  46 +++++++++++
drivers/net/iavf/iavf_vchnl.c  | 147 +++++++++++++++++++++++++++++++++
 3 files changed, 199 insertions(+)
drivers/net/iavf/iavf.h index renamed from drivers/net/iavf/iavf.h +0 -0

6d5912d8c..c57ad6175 100644

drivers/net/iavf/iavf.h +1 -0
@@ -132,6 +132,7 @@ struct iavf_info {
 	struct virtchnl_version_info virtchnl_version;
 	struct virtchnl_vf_resource *vf_res; /* VF resource */
 	struct virtchnl_vsi_resource *vsi_res; /* LAN VSI */
+	struct virtchnl_vlan_caps vlan_v2_caps;
 	uint64_t supported_rxdid;
 	uint8_t *proto_xtr; /* proto xtr type for all queues */
 	volatile enum virtchnl_ops pend_cmd; /* pending command not

finished */ @@ -288,7 +289,9 @@ int iavf_check_api_version(struct iavf_adapter *adapter); int iavf_get_vf_resource(struct iavf_adapter *adapter); void iavf_handle_virtchnl_msg(struct rte_eth_dev *dev); int iavf_enable_vlan_strip(struct iavf_adapter *adapter);

drivers/net/iavf/iavf.h +2 -0
+int iavf_enable_vlan_strip_v2(struct iavf_adapter *adapter);
 int iavf_disable_vlan_strip(struct iavf_adapter *adapter);
+int iavf_disable_vlan_strip_v2(struct iavf_adapter *adapter);
 int iavf_switch_queue(struct iavf_adapter *adapter, uint16_t qid,
 		     bool rx, bool on);
 int iavf_switch_queue_lv(struct iavf_adapter *adapter, uint16_t qid, @@ -

302,6 +305,7 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter); int iavf_configure_queues(struct iavf_adapter *adapter,
uint16_t num_queue_pairs, uint16_t index); int
iavf_get_supported_rxdid(struct iavf_adapter *adapter);
+int iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter);
int iavf_config_irq_map(struct iavf_adapter *adapter); int
iavf_config_irq_map_lv(struct iavf_adapter *adapter, uint16_t num,

drivers/net/iavf/iavf.h +0 -0
 			uint16_t index);
@@ -315,6 +319,8 @@ int iavf_config_promisc(struct iavf_adapter *adapter,

bool enable_unicast, int iavf_add_del_eth_addr(struct iavf_adapter *adapter,
struct rte_ether_addr *addr, bool add); int
iavf_add_del_vlan(struct iavf_adapter *adapter, uint16_t vlanid, bool add);

drivers/net/iavf/iavf.h +2 -0
+int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t vlanid,
+			 bool add);
 int iavf_fdir_add(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);

int iavf_fdir_del(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter); int iavf_fdir_check(struct iavf_adapter *adapter, diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c index 0fd06e4b4..4d946013c 100644

drivers/net/iavf/iavf_ethdev.c +8 -0
@@ -384,6 +384,14 @@ iavf_dev_configure(struct rte_eth_dev *dev)
 		vf->max_rss_qregion = IAVF_MAX_NUM_QUEUES_DFLT;
 	}
 
+	/* Vlan stripping setting v2 */
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2) {
+		if (dev_conf->rxmode.offloads &
 DEV_RX_OFFLOAD_VLAN_STRIP)
+			iavf_enable_vlan_strip_v2(ad);
+		else
+			iavf_disable_vlan_strip_v2(ad);
+	}
+
 	/* Vlan stripping setting */
 	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN) {

if (dev_conf->rxmode.offloads &
DEV_RX_OFFLOAD_VLAN_STRIP) @@ -992,6 +1000,13 @@ iavf_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)

drivers/net/iavf/iavf_ethdev.c +38 -0
 	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
 	int err;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2) {
+		err = iavf_add_del_vlan_v2(adapter, vlan_id, on);
+		if (err)
+			return -EIO;
+		return 0;
+	}
+
 	if (!(vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
 		return -ENOTSUP;
@@ -1001,6 +1016,27 @@ iavf_dev_vlan_filter_set(struct rte_eth_dev *dev,
 uint16_t vlan_id, int on)
 	return 0;
 }
 
+static int
+iavf_dev_vlan_offload_set_v2(struct rte_eth_dev *dev, int mask) {
+	struct iavf_adapter *adapter =
+		IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
+	int err;
+
+	if (mask & ETH_VLAN_STRIP_MASK) {
+		if (dev_conf->rxmode.offloads &
 DEV_RX_OFFLOAD_VLAN_STRIP)
+			err = iavf_enable_vlan_strip_v2(adapter);
+		else
+			err = iavf_disable_vlan_strip_v2(adapter);
+
+		if (err)
+			return -EIO;
+	}
+
+	return 0;
+}
+
 static int
 iavf_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask)  { @@ -1010,6
+1046,9 @@ iavf_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
 	int err;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2)
+		return iavf_dev_vlan_offload_set_v2(dev, mask);
+
 	if (!(vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
 		return -ENOTSUP;
@@ -1861,6 +1900,13 @@ iavf_init_vf(struct rte_eth_dev *dev)
 		}
 	}
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2) {
+		if (iavf_get_vlan_offload_caps_v2(adapter) != 0) {
+			PMD_INIT_LOG(ERR, "failed to do get VLAN offload
 v2 capabilities");
+			goto err_rss;
+		}
+	}
+
 	iavf_init_proto_xtr(dev);
 
drivers/net/iavf/iavf_ethdev.c +0 -0
 	return 0;
drivers/net/iavf/iavf_vchnl.c index renamed from drivers/net/iavf/iavf_vchnl.c +0 -0

3f949c9e3..6b571924f 100644

drivers/net/iavf/iavf_vchnl.c +1 -0
@@ -174,6 +174,7 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter,
 struct iavf_cmd_info *args)
 	case VIRTCHNL_OP_VERSION:
 	case VIRTCHNL_OP_GET_VF_RESOURCES:
 	case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
+	case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
 		/* for init virtchnl ops, need to poll the response */
 		do {

result = iavf_read_msg_from_pf(adapter, args-

Quoted 1 line

out_size, @@ -366,6 +367,45 @@ iavf_enable_vlan_strip(struct

iavf_adapter *adapter)
return ret;
}

Quoted 7 lines

drivers/net/iavf/iavf_vchnl.c

Quoted 2 lines
drivers/net/iavf/iavf_vchnl.c +2 -0
+int
+iavf_enable_vlan_strip_v2(struct iavf_adapter *adapter) {

Why we don't use one function to implement vlan strip v2? iavf_switch_vlan_strip_v2(struct iavf_adapter *adapter, bool on) args.ops = on ? VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2

		   : VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2;

Make the code align to VLAN v1, like:

	/* Vlan stripping setting v2 */
	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN_V2) {
		if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
			iavf_enable_vlan_strip_v2(ad);
		else
			iavf_disable_vlan_strip_v2(ad);
	}

	/* Vlan stripping setting */
	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN) {
		if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
			iavf_enable_vlan_strip(ad);
		else
			iavf_disable_vlan_strip(ad);
	}
Quoted 46 lines
Quoted 46 lines
drivers/net/iavf/iavf_vchnl.c +9 -0
+	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
+	struct virtchnl_vlan_offload_caps *offload_caps;
+	struct virtchnl_vlan_strip vlan_strip;
+	struct iavf_cmd_info args;
+	bool outer;
+	int ret;
+
+	offload_caps = &vf->vlan_v2_caps.offloads;
+	if (offload_caps->outer_stripping &

VIRTCHNL_VLAN_ETHERTYPE_8100)

drivers/net/iavf/iavf_vchnl.c +2 -0
+		outer = true;
+	else if (offload_caps->inner_stripping &

VIRTCHNL_VLAN_ETHERTYPE_8100)

drivers/net/iavf/iavf_vchnl.c +26 -0
+		outer = false;
+	else
+		return -ENOTSUP;
+
+	memset(&vlan_strip, 0, sizeof(vlan_strip));
+	vlan_strip.vsi_id = vf->vsi_res->vsi_id;
+	if (outer)
+		vlan_strip.outer_ethertype_setting =
+					VIRTCHNL_VLAN_ETHERTYPE_8100;
+	else
+		vlan_strip.inner_ethertype_setting =
+					VIRTCHNL_VLAN_ETHERTYPE_8100;
+
+	args.ops = VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2;
+	args.in_args = (uint8_t *)&vlan_strip;
+	args.in_args_size = sizeof(vlan_strip);
+	args.out_buffer = vf->aq_resp;
+	args.out_size = IAVF_AQ_BUF_SZ;
+	ret = iavf_execute_vf_cmd(adapter, &args);
+	if (ret)
+		PMD_DRV_LOG(ERR, "fail to execute command
+VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2");
+
+	return ret;
+}
+
 int
 iavf_disable_vlan_strip(struct iavf_adapter *adapter)  { @@ -387,6 +427,45

@@ iavf_disable_vlan_strip(struct iavf_adapter *adapter)
return ret;
}

Quoted 5 lines

drivers/net/iavf/iavf_vchnl.c

Quoted 2 lines
drivers/net/iavf/iavf_vchnl.c +2 -0
+int
+iavf_disable_vlan_strip_v2(struct iavf_adapter *adapter) {

Same comment.

Ditto.

Quoted 1 line
Quoted 1 line

2.29.2

#8 lore raw
In reply to Haiyue Wang

Hi, Haiyue
Will this patch set cover DCF QinQ enable in the future?

Qiming

Quoted 36 lines

-----Original Message-----
From: Wang, Haiyue <[email protected]>
Sent: Monday, December 14, 2020 15:12
To: [email protected]
Cc: Yang, Qiming <[email protected]>; Wu, Jingjing <[email protected]>; Zhang, Qi Z <[email protected]>; Wang, Haiyue <[email protected]>
Subject: [PATCH v2 0/5] Add AVF & DCF VLAN feaure

Add new VLAN feature, which has rich settings.

Haiyue Wang (5):
common/iavf: new VLAN opcode
net/iavf: support Ethernet CRC strip disable
net/ice: enable QinQ filter for switch
net/ice: add DCF port representor
net/iavf: support new VLAN virtchnl opcodes

 drivers/common/iavf/virtchnl.h           | 229 +++++++++++++++
 drivers/net/iavf/iavf.h                  |   6 +
 drivers/net/iavf/iavf_ethdev.c           |  49 ++++
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 150 +++++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/ice_generic_flow.c       |   8 +
 drivers/net/ice/ice_generic_flow.h       |   1 +
 drivers/net/ice/ice_switch_filter.c      | 104 ++++++-
 drivers/net/ice/meson.build              |   1 +
 13 files changed, 1002 insertions(+), 20 deletions(-)  create mode 100644

drivers/net/ice/ice_dcf_vf_representor.c

--
2.29.2

#9 lore raw
Quoted 9 lines

-----Original Message-----
From: Yang, Qiming <[email protected]>
Sent: Tuesday, December 15, 2020 13:22
To: Wang, Haiyue <[email protected]>; [email protected]
Cc: Wu, Jingjing <[email protected]>; Zhang, Qi Z <[email protected]>
Subject: RE: [PATCH v2 0/5] Add AVF & DCF VLAN feaure

Hi, Haiyue
Will this patch set cover DCF QinQ enable in the future?

Yes.

Quoted 39 lines

Qiming

Quoted 36 lines

-----Original Message-----
From: Wang, Haiyue <[email protected]>
Sent: Monday, December 14, 2020 15:12
To: [email protected]
Cc: Yang, Qiming <[email protected]>; Wu, Jingjing <[email protected]>; Zhang, Qi Z <[email protected]>; Wang, Haiyue <[email protected]>
Subject: [PATCH v2 0/5] Add AVF & DCF VLAN feaure

Add new VLAN feature, which has rich settings.

Haiyue Wang (5):
common/iavf: new VLAN opcode
net/iavf: support Ethernet CRC strip disable
net/ice: enable QinQ filter for switch
net/ice: add DCF port representor
net/iavf: support new VLAN virtchnl opcodes

 drivers/common/iavf/virtchnl.h           | 229 +++++++++++++++
 drivers/net/iavf/iavf.h                  |   6 +
 drivers/net/iavf/iavf_ethdev.c           |  49 ++++
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 150 +++++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/ice_generic_flow.c       |   8 +
 drivers/net/ice/ice_generic_flow.h       |   1 +
 drivers/net/ice/ice_switch_filter.c      | 104 ++++++-
 drivers/net/ice/meson.build              |   1 +
 13 files changed, 1002 insertions(+), 20 deletions(-)  create mode 100644

drivers/net/ice/ice_dcf_vf_representor.c

--
2.29.2

#10 lore raw

v3 cover Add AVF & DCF VLAN feaure

In reply to Haiyue Wang

Add new VLAN feature, which has rich settings.

v3: code refactor for handing QinQ according to the VC response.

Haiyue Wang (5):
common/iavf: new VLAN opcode
net/iavf: support Ethernet CRC strip disable net/ice: enable QinQ filter for switch net/ice: add the DCF VLAN handling net/iavf: implement new VLAN capability handling

 drivers/common/iavf/virtchnl.h           | 259 +++++++++++++++++
 drivers/net/iavf/iavf.h                  |  10 +
 drivers/net/iavf/iavf_ethdev.c           | 110 +++++++
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 144 ++++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/ice_generic_flow.c       |   8 +
 drivers/net/ice/ice_generic_flow.h       |   1 +
 drivers/net/ice/ice_switch_filter.c      | 104 ++++++-
 drivers/net/ice/meson.build              |   1 +
 13 files changed, 1091 insertions(+), 20 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
Signature · 1 line
2.29.2
#11 lore raw

PATCH v3 1/5 common/iavf: new VLAN opcode

Add new VLAN opcode support.

---
 drivers/common/iavf/virtchnl.h | 259 +++++++++++++++++++++++++++++++++
 1 file changed, 259 insertions(+)
drivers/common/iavf/virtchnl.h +259 -0
index fcbaa31fa..13788e46b 100644
@@ -129,6 +129,7 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
 	VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
 	/* opcodes 34, 35, 36, 37 and 38 are reserved */
+	VIRTCHNL_OP_DCF_VLAN_OFFLOAD = 38,
 	VIRTCHNL_OP_DCF_CMD_DESC = 39,
 	VIRTCHNL_OP_DCF_CMD_BUFF = 40,
 	VIRTCHNL_OP_DCF_DISABLE = 41,
@@ -141,6 +142,11 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_DEL_FDIR_FILTER = 48,
 	VIRTCHNL_OP_QUERY_FDIR_FILTER = 49,
 	VIRTCHNL_OP_GET_MAX_RSS_QREGION = 50,
+	VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51,
+	VIRTCHNL_OP_ADD_VLAN_V2 = 52,
+	VIRTCHNL_OP_DEL_VLAN_V2 = 53,
+	VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54,
+	VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55,
 	VIRTCHNL_OP_ENABLE_QUEUES_V2 = 107,
 	VIRTCHNL_OP_DISABLE_QUEUES_V2 = 108,
 	VIRTCHNL_OP_MAP_QUEUE_VECTOR = 111,
@@ -251,6 +257,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
 #define VIRTCHNL_VF_OFFLOAD_CRC			0x00000080
 	/* 0X00000100 is reserved */
 #define VIRTCHNL_VF_LARGE_NUM_QPAIRS		0x00000200
+#define VIRTCHNL_VF_OFFLOAD_VLAN_V2		0x00008000
 #define VIRTCHNL_VF_OFFLOAD_VLAN		0x00010000
 #define VIRTCHNL_VF_OFFLOAD_RX_POLLING		0x00020000
 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000
@@ -536,6 +543,202 @@ struct virtchnl_vlan_filter_list {
 
 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
 
+/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related
+ * structures and opcodes.
+ *
+ * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver
+ * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported
+ * by the PF concurrently. For example, if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it
+ * would OR the following in the virtchnl_vlan_filtering_caps.outer field:
+ *
+ * 	VIRTHCNL_VLAN_ETHERTYPE_8100 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_AND;
+ *
+ * The VF would interpret this as VLAN filtering can be supported on both 0x8100
+ * and 0x88A8 VLAN ethertypes.
+ *
+ * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported
+ * by the PF concurrently. For example if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping
+ * offload it would OR the following in the
+ * virtchnl_vlan_offload_caps.outer_stripping field:
+ *
+ * 	VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_XOR;
+ *
+ * The VF would interpret this as VLAN stripping can be supported on either
+ * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override
+ * the previously set value.
+ *
+ * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for
+ * VLAN filtering if the underlying PF supports it.
+ *
+ * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a
+ * certain VLAN capability can be toggled. For example if the underlying PF/CP
+ * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should
+ * set this bit along with the supported ethertypes.
+ */
+enum virtchnl_vlan_support {
+	VIRTCHNL_VLAN_UNSUPPORTED =	0,
+	VIRTCHNL_VLAN_ETHERTYPE_8100 =	0x0001,
+	VIRTCHNL_VLAN_ETHERTYPE_88A8 =	0x0002,
+	VIRTCHNL_VLAN_ETHERTYPE_9100 =	0x0004,
+	VIRTCHNL_VLAN_PRIO =		0x0100,
+	VIRTCHNL_VLAN_FILTER_MASK =	0x1000,
+	VIRTCHNL_VLAN_ETHERTYPE_AND =	0x2000,
+	VIRTCHNL_VLAN_ETHERTYPE_XOR =	0x4000,
+	VIRTCHNL_VLAN_TOGGLE =		0x8000,
+};
+
+/* The PF populates these fields based on the supported VLAN filtering. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using
+ * the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN filtering setting if the
+ * VIRTCHNL_VFLAN_TOGGLE_ALLOWED bit is set.
+ *
+ * The max_filters field tells the VF how many VLAN filters it's allowed to have
+ * at any one time. If it exceeds this amount and tries to add another filter,
+ * then the request will be rejected by the PF.
+ */
+struct virtchnl_vlan_filtering_caps {
+	u16 outer;
+	u16 inner;
+	u16 max_filters;
+	u8 pad[4];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(10, virtchnl_vlan_filtering_caps);
+
+/* This enum is used for the virtchnl_vlan_offload_caps structure to specify
+ * if the PF supports a different ethertype for stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified
+ * for stripping affect the ethertype(s) sepcified for insertion and visa versa
+ * as well. If the VF tries to configure VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then
+ * that will be the ethertype for both stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for
+ * stripping do not affect the ethertype(s) specified for insertion and visa
+ * versa.
+ */
+enum virtchnl_vlan_ethertype_match {
+	VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0,
+	VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,
+};
+
+/* The PF populates these fields based on the supported VLAN offloads. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN offload setting if the
+ * VIRTCHNL_VFLAN_TOGGLE_ALLOWED bit is set.
+ *
+ * The VF driver needs to be aware of how the tags are stipped by hardware and
+ * inserted by the VF driver based on the level of offload support.
+ *
+ * outer_stripping supported - VLAN tag stripped into L2TAG2 field by hardware
+ * outer_insertion supported - VLAN tag inserted into L2TAG2 field by VF driver
+ *
+ * inner_stripping supported - VLAN tag stripped into L2TAG1 field by hardware
+ * inner_insertion supported - VLAN tag inserted into L2TAG1 field by VF driver
+ */
+struct virtchnl_vlan_offload_caps {
+	u16 outer_stripping;
+	u16 inner_stripping;
+	u16 outer_insertion;
+	u16 inner_insertion;
+	u16 ethertype_init;
+	u8 ethertype_match;
+	u8 pad[3];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_vlan_offload_caps);
+
+/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
+ * VF sends this message to determine its VLAN capabilities.
+ *
+ * PF will mark which capabilities it supports based on hardware support and
+ * current configuration. For example, if a port VLAN is configured the PF will
+ * not allow outer VLAN filtering, stripping, or insertion to be configured so
+ * it will block these features from the VF.
+ *
+ * The VF will need to cross reference its capabilities with the PFs
+ * capabilities in the response message from the PF to determine the VLAN
+ * support.
+ */
+struct virtchnl_vlan_caps {
+	struct virtchnl_vlan_filtering_caps filtering;
+	struct virtchnl_vlan_offload_caps offloads;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_caps);
+
+struct virtchnl_vlan {
+	u16 tci;	/* tci[15:13] = PCP and tci[11:0] = VID */
+	u16 tci_mask;	/* only valid if VIRTCHNL_VLAN_FILTER_MASK set in filtering caps */
+	u16 tpid;	/* 0x8100, 0x88a8, etc. and only type(s) set in filtering caps */
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
+
+struct virtchnl_vlan_filter {
+	struct virtchnl_vlan inner;
+	struct virtchnl_vlan outer;
+	u8 pad[16];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
+
+/* VIRTCHNL_OP_ADD_VLAN_V2
+ * VIRTCHNL_OP_DEL_VLAN_V2
+ *
+ * VF sends these messages to add/del one or more VLAN tag filters for Rx traffic.
+ *
+ * The PF/CP attempts to add the filters and returns status.
+ *
+ * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the
+ * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
+ */
+struct virtchnl_vlan_filter_list_v2 {
+	u16 vport_id;
+	u16 num_elements;
+	u8 pad[4];
+	struct virtchnl_vlan_filter filters[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2);
+
+/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2
+ *
+ * VF sends this message to enable or disable VLAN stripping. It also needs to
+ * specify an ethertype. The VF knows which virtchnl_vlan_filter fields are
+ * allowed via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message.
+ */
+struct virtchnl_vlan_strip {
+	u16 vsi_id;
+	u16 outer_ethertype_setting;	/* 0x8100, 0x88a8, etc. and only type(s) set in the offload caps */
+	u16 inner_ethertype_setting;	/* 0x8100, 0x88a8, etc. and only type(s) set in the offload caps */
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan_strip);
+
 /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
  * VF sends VSI id and flags.
  * PF returns status code in retval.
@@ -754,6 +957,32 @@ struct virtchnl_pkg_info {
 
 VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_pkg_info);
 
+struct virtchnl_dcf_vlan_offload {
+	u16 vf_id;
+	u16 tpid;
+	u16 vlan_flags;
+#define VIRTCHNL_DCF_VLAN_TYPE_S		0
+#define VIRTCHNL_DCF_VLAN_TYPE_M		\
+			(0x1 << VIRTCHNL_DCF_VLAN_TYPE_S)
+#define VIRTCHNL_DCF_VLAN_TYPE_INNER		0x0
+#define VIRTCHNL_DCF_VLAN_TYPE_OUTER		0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_S		1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_M	\
+			(0x7 << VIRTCHNL_DCF_VLAN_INSERT_MODE_S)
+#define VIRTCHNL_DCF_VLAN_INSERT_DISABLE	0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_PORT_BASED	0x2
+#define VIRTCHNL_DCF_VLAN_INSERT_VIA_TX_DESC	0x3
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_S		4
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_M		\
+			(0x7 << VIRTCHNL_DCF_VLAN_STRIP_MODE_S)
+#define VIRTCHNL_DCF_VLAN_STRIP_DISABLE		0x1
+#define VIRTCHNL_DCF_VLAN_STRIP_ONLY		0x2
+#define VIRTCHNL_DCF_VLAN_STRIP_INTO_RX_DESC	0x3
+	u16 vlan_id;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_dcf_vlan_offload);
+
 struct virtchnl_supported_rxdids {
 	u64 supported_rxdids;
 };
@@ -1291,6 +1520,10 @@ enum virtchnl_vector_limits {
 	VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX	=
 		((u16)(~0) - sizeof(struct virtchnl_queue_vector_maps)) /
 		sizeof(struct virtchnl_queue_vector),
+
+	VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX		=
+		((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list_v2)) /
+		sizeof(struct virtchnl_vlan_filter),
 };
 
 /**
@@ -1465,6 +1698,9 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
 	case VIRTCHNL_OP_DEL_CLOUD_FILTER:
 		valid_len = sizeof(struct virtchnl_filter);
 		break;
+	case VIRTCHNL_OP_DCF_VLAN_OFFLOAD:
+		valid_len = sizeof(struct virtchnl_dcf_vlan_offload);
+		break;
 	case VIRTCHNL_OP_DCF_CMD_DESC:
 	case VIRTCHNL_OP_DCF_CMD_BUFF:
 		/* These two opcodes are specific to handle the AdminQ command,
@@ -1491,6 +1727,29 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
 	case VIRTCHNL_OP_QUERY_FDIR_FILTER:
 		valid_len = sizeof(struct virtchnl_fdir_query);
 		break;
+	case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
+		break;
+	case VIRTCHNL_OP_ADD_VLAN_V2:
+	case VIRTCHNL_OP_DEL_VLAN_V2:
+		valid_len = sizeof(struct virtchnl_vlan_filter_list_v2);
+		if (msglen >= valid_len) {
+			struct virtchnl_vlan_filter_list_v2 *vfl =
+			    (struct virtchnl_vlan_filter_list_v2 *)msg;
+
+			if (vfl->num_elements == 0 || vfl->num_elements >
+			    VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX) {
+				err_msg_format = true;
+				break;
+			}
+
+			valid_len += (vfl->num_elements - 1) *
+				sizeof(struct virtchnl_vlan_filter);
+		}
+		break;
+	case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
+	case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
+		valid_len = sizeof(struct virtchnl_vlan_strip);
+		break;
 	case VIRTCHNL_OP_ENABLE_QUEUES_V2:
 	case VIRTCHNL_OP_DISABLE_QUEUES_V2:
 		valid_len = sizeof(struct virtchnl_del_ena_dis_queues);
Signature · 1 line
2.29.2
#12 lore raw

PATCH v3 2/5 net/iavf: support Ethernet CRC strip disable

In reply to Haiyue Wang

The VF will check the PF's CRC strip capability firstly, then set the 'CRC strip disable' value in the queue configuration according to the RX CRC offload setting.

---
 drivers/net/iavf/iavf_ethdev.c | 3 +++
 drivers/net/iavf/iavf_rxtx.c   | 6 +++++-
 drivers/net/iavf/iavf_vchnl.c  | 3 ++-
 3 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/iavf/iavf_ethdev.c +3 -0
index d2fa16825..75361b73b 100644
@@ -798,6 +798,9 @@ iavf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		DEV_TX_OFFLOAD_MULTI_SEGS |
 		DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_CRC)
+		dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_KEEP_CRC;
+
 	dev_info->default_rxconf = (struct rte_eth_rxconf) {
 		.rx_free_thresh = IAVF_DEFAULT_RX_FREE_THRESH,
 		.rx_drop_en = 0,
drivers/net/iavf/iavf_rxtx.c +5 -1
index 21d508b3f..d53d7b984 100644
@@ -550,11 +550,15 @@ iavf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 	rxq->rx_free_thresh = rx_free_thresh;
 	rxq->queue_id = queue_idx;
 	rxq->port_id = dev->data->port_id;
-	rxq->crc_len = 0; /* crc stripping by default */
 	rxq->rx_deferred_start = rx_conf->rx_deferred_start;
 	rxq->rx_hdr_len = 0;
 	rxq->vsi = vsi;
 
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+		rxq->crc_len = RTE_ETHER_CRC_LEN;
+	else
+		rxq->crc_len = 0;
+
 	len = rte_pktmbuf_data_room_size(rxq->mp) - RTE_PKTMBUF_HEADROOM;
 	rxq->rx_buf_len = RTE_ALIGN(len, (1 << IAVF_RXQ_CTX_DBUFF_SHIFT));
 
drivers/net/iavf/iavf_vchnl.c +2 -1
index 25d5cdaf5..c33194cdc 100644
@@ -458,6 +458,7 @@ iavf_get_vf_resource(struct iavf_adapter *adapter)
 		VIRTCHNL_VF_OFFLOAD_FDIR_PF |
 		VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF |
 		VIRTCHNL_VF_OFFLOAD_REQ_QUEUES |
+		VIRTCHNL_VF_OFFLOAD_CRC |
 		VIRTCHNL_VF_LARGE_NUM_QPAIRS;
 
 	args.in_args = (uint8_t *)&caps;
@@ -853,7 +854,7 @@ iavf_configure_queues(struct iavf_adapter *adapter,
 		vc_qp->rxq.ring_len = rxq[i]->nb_rx_desc;
 		vc_qp->rxq.dma_ring_addr = rxq[i]->rx_ring_phys_addr;
 		vc_qp->rxq.databuffer_size = rxq[i]->rx_buf_len;
-
+		vc_qp->rxq.crc_disable = rxq[i]->crc_len != 0 ? 1 : 0;
 #ifndef RTE_LIBRTE_IAVF_16BYTE_RX_DESC
 		if (vf->vf_res->vf_cap_flags &
 		    VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC &&
Signature · 1 line
2.29.2
#13 lore raw

PATCH v3 3/5 net/ice: enable QinQ filter for switch

In reply to Haiyue Wang

Enable the double VLAN support for QinQ filter switch.

---
 drivers/net/ice/ice_generic_flow.c  |   8 +++
 drivers/net/ice/ice_generic_flow.h  |   1 +
 drivers/net/ice/ice_switch_filter.c | 104 +++++++++++++++++++++++++---
 3 files changed, 102 insertions(+), 11 deletions(-)
drivers/net/ice/ice_generic_flow.c +8 -0
index 1429cbc3b..1712d3b2e 100644
@@ -1455,6 +1455,14 @@ enum rte_flow_item_type pattern_eth_qinq_pppoes[] = {
 	RTE_FLOW_ITEM_TYPE_PPPOES,
 	RTE_FLOW_ITEM_TYPE_END,
 };
+enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[] = {
+	RTE_FLOW_ITEM_TYPE_ETH,
+	RTE_FLOW_ITEM_TYPE_VLAN,
+	RTE_FLOW_ITEM_TYPE_VLAN,
+	RTE_FLOW_ITEM_TYPE_PPPOES,
+	RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID,
+	RTE_FLOW_ITEM_TYPE_END,
+};
 enum rte_flow_item_type pattern_eth_pppoes_ipv4[] = {
 	RTE_FLOW_ITEM_TYPE_ETH,
 	RTE_FLOW_ITEM_TYPE_PPPOES,
drivers/net/ice/ice_generic_flow.h +1 -0
index 434d2f425..dc45d8dc6 100644
@@ -426,6 +426,7 @@ extern enum rte_flow_item_type pattern_eth_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_qinq_pppoes[];
+extern enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_pppoes_ipv4[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes_ipv4[];
 extern enum rte_flow_item_type pattern_eth_qinq_pppoes_ipv4[];
drivers/net/ice/ice_switch_filter.c +93 -11

189 lines not on this page · raw message

Signature · 1 line
2.29.2
#14 lore raw

PATCH v3 4/5 net/ice: add the DCF VLAN handling

In reply to Haiyue Wang

Add the DCF port representor infrastructure for the VFs of DCF attached PF. Then the standard ethdev API like VLAN can be used to configure the VFs.

---
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 5 files changed, 462 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
drivers/net/ice/ice_dcf.c +1 -0
index 44dbd3bb8..4a9af3292 100644
@@ -234,6 +234,7 @@ ice_dcf_get_vf_resource(struct ice_dcf_hw *hw)
 
 	caps = VIRTCHNL_VF_OFFLOAD_WB_ON_ITR | VIRTCHNL_VF_OFFLOAD_RX_POLLING |
 	       VIRTCHNL_VF_CAP_ADV_LINK_SPEED | VIRTCHNL_VF_CAP_DCF |
+	       VIRTCHNL_VF_OFFLOAD_VLAN_V2 |
 	       VF_BASE_MODE_OFFLOADS | VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC;
 
 	err = ice_dcf_send_cmd_req_no_irq(hw, VIRTCHNL_OP_GET_VF_RESOURCES,
drivers/net/ice/ice_dcf_ethdev.c +84 -7

104 lines not on this page · raw message

drivers/net/ice/ice_dcf_ethdev.h +20 -0
index b54528bea..bd5552332 100644
@@ -22,9 +22,29 @@ struct ice_dcf_adapter {
 	struct ice_dcf_hw real_hw;
 };
 
+struct ice_dcf_vf_repr_param {
+	struct ice_dcf_adapter *adapter;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+};
+
+struct ice_dcf_vf_repr {
+	struct ice_dcf_adapter *dcf_adapter;
+	struct rte_ether_addr mac_addr;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+
+	uint16_t outer_vlan_tpid;
+	uint16_t pvid;
+	uint16_t hw_vlan_insert_pvid:1;
+};
+
 void ice_dcf_handle_pf_event_msg(struct ice_dcf_hw *dcf_hw,
 				 uint8_t *msg, uint16_t msglen);
 int ice_dcf_init_parent_adapter(struct rte_eth_dev *eth_dev);
 void ice_dcf_uninit_parent_adapter(struct rte_eth_dev *eth_dev);
 
+int ice_dcf_vf_repr_init(struct rte_eth_dev *ethdev, void *init_param);
+int ice_dcf_vf_repr_uninit(struct rte_eth_dev *ethdev);
+
 #endif /* _ICE_DCF_ETHDEV_H_ */
drivers/net/ice/ice_dcf_vf_representor.c new file +356 -0

356 lines not on this page · raw message

drivers/net/ice/meson.build +1 -0
index 7b291269d..d58936089 100644
@@ -61,6 +61,7 @@ if arch_subdir == 'x86'
 endif
 
 sources += files('ice_dcf.c',
+		 'ice_dcf_vf_representor.c',
 		 'ice_dcf_ethdev.c',
 		 'ice_dcf_parent.c')
 
Signature · 1 line
2.29.2
#15 lore raw

PATCH v3 5/5 net/iavf: implement new VLAN capability handling

In reply to Haiyue Wang

The new VLAN virtchnl opcodes introduce new settings like different TPID filtering, stripping.

---
 drivers/net/iavf/iavf.h        |  10 +++
 drivers/net/iavf/iavf_ethdev.c | 107 +++++++++++++++++++++++++
 drivers/net/iavf/iavf_vchnl.c  | 141 +++++++++++++++++++++++++++++++++
 3 files changed, 258 insertions(+)
drivers/net/iavf/iavf.h +10 -0
index 9754273b2..c5d53bd9c 100644
@@ -139,6 +139,7 @@ struct iavf_info {
 	struct virtchnl_version_info virtchnl_version;
 	struct virtchnl_vf_resource *vf_res; /* VF resource */
 	struct virtchnl_vsi_resource *vsi_res; /* LAN VSI */
+	struct virtchnl_vlan_caps vlan_v2_caps;
 	uint64_t supported_rxdid;
 	uint8_t *proto_xtr; /* proto xtr type for all queues */
 	volatile enum virtchnl_ops pend_cmd; /* pending command not finished */
@@ -173,6 +174,10 @@ struct iavf_info {
 	struct iavf_fdir_info fdir; /* flow director info */
 	/* indicate large VF support enabled or not */
 	bool lv_enabled;
+
+	/* used to set the VLAN Ethernet type for virtchnl VLAN V2 */
+	uint16_t outer_vlan_tpid;
+	uint16_t inner_vlan_tpid;
 };
 
 #define IAVF_MAX_PKT_TYPE 1024
@@ -297,6 +302,8 @@ int iavf_get_vf_resource(struct iavf_adapter *adapter);
 void iavf_handle_virtchnl_msg(struct rte_eth_dev *dev);
 int iavf_enable_vlan_strip(struct iavf_adapter *adapter);
 int iavf_disable_vlan_strip(struct iavf_adapter *adapter);
+int iavf_config_vlan_strip_v2(struct iavf_adapter *adapter, uint16_t tpid,
+			      bool enable);
 int iavf_switch_queue(struct iavf_adapter *adapter, uint16_t qid,
 		     bool rx, bool on);
 int iavf_switch_queue_lv(struct iavf_adapter *adapter, uint16_t qid,
@@ -310,6 +317,7 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter);
 int iavf_configure_queues(struct iavf_adapter *adapter,
 			uint16_t num_queue_pairs, uint16_t index);
 int iavf_get_supported_rxdid(struct iavf_adapter *adapter);
+int iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter);
 int iavf_config_irq_map(struct iavf_adapter *adapter);
 int iavf_config_irq_map_lv(struct iavf_adapter *adapter, uint16_t num,
 			uint16_t index);
@@ -323,6 +331,8 @@ int iavf_config_promisc(struct iavf_adapter *adapter, bool enable_unicast,
 int iavf_add_del_eth_addr(struct iavf_adapter *adapter,
 			 struct rte_ether_addr *addr, bool add);
 int iavf_add_del_vlan(struct iavf_adapter *adapter, uint16_t vlanid, bool add);
+int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t tpid,
+			 uint16_t vlanid, bool add);
 int iavf_fdir_add(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);
 int iavf_fdir_del(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);
 int iavf_fdir_check(struct iavf_adapter *adapter,
drivers/net/iavf/iavf_ethdev.c +107 -0

167 lines not on this page · raw message

drivers/net/iavf/iavf_vchnl.c +141 -0

177 lines not on this page · raw message

Signature · 1 line
2.29.2
#16 lore raw

v4 cover Add AVF & DCF VLAN feaure

In reply to Haiyue Wang

Add new VLAN feature, which has rich settings.

v4: make code readable for QinQ TPID setting.
v3: code refactor for handing QinQ according to the VC response.

Haiyue Wang (5):
common/iavf: new VLAN opcode
net/iavf: support Ethernet CRC strip disable net/ice: enable QinQ filter for switch net/ice: add the DCF VLAN handling net/iavf: implement new VLAN capability handling

 drivers/common/iavf/virtchnl.h           | 259 +++++++++++++++++
 drivers/net/iavf/iavf.h                  |  10 +
 drivers/net/iavf/iavf_ethdev.c           | 117 ++++++++
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 144 ++++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/ice_generic_flow.c       |   8 +
 drivers/net/ice/ice_generic_flow.h       |   1 +
 drivers/net/ice/ice_switch_filter.c      | 104 ++++++-
 drivers/net/ice/meson.build              |   1 +
 13 files changed, 1098 insertions(+), 20 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
Signature · 1 line
2.29.2
#17 lore raw

PATCH v4 1/5 common/iavf: new VLAN opcode

Add new VLAN opcode support.

---
 drivers/common/iavf/virtchnl.h | 259 +++++++++++++++++++++++++++++++++
 1 file changed, 259 insertions(+)
drivers/common/iavf/virtchnl.h +259 -0
index fcbaa31fa..13788e46b 100644
@@ -129,6 +129,7 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
 	VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
 	/* opcodes 34, 35, 36, 37 and 38 are reserved */
+	VIRTCHNL_OP_DCF_VLAN_OFFLOAD = 38,
 	VIRTCHNL_OP_DCF_CMD_DESC = 39,
 	VIRTCHNL_OP_DCF_CMD_BUFF = 40,
 	VIRTCHNL_OP_DCF_DISABLE = 41,
@@ -141,6 +142,11 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_DEL_FDIR_FILTER = 48,
 	VIRTCHNL_OP_QUERY_FDIR_FILTER = 49,
 	VIRTCHNL_OP_GET_MAX_RSS_QREGION = 50,
+	VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51,
+	VIRTCHNL_OP_ADD_VLAN_V2 = 52,
+	VIRTCHNL_OP_DEL_VLAN_V2 = 53,
+	VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54,
+	VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55,
 	VIRTCHNL_OP_ENABLE_QUEUES_V2 = 107,
 	VIRTCHNL_OP_DISABLE_QUEUES_V2 = 108,
 	VIRTCHNL_OP_MAP_QUEUE_VECTOR = 111,
@@ -251,6 +257,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
 #define VIRTCHNL_VF_OFFLOAD_CRC			0x00000080
 	/* 0X00000100 is reserved */
 #define VIRTCHNL_VF_LARGE_NUM_QPAIRS		0x00000200
+#define VIRTCHNL_VF_OFFLOAD_VLAN_V2		0x00008000
 #define VIRTCHNL_VF_OFFLOAD_VLAN		0x00010000
 #define VIRTCHNL_VF_OFFLOAD_RX_POLLING		0x00020000
 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000
@@ -536,6 +543,202 @@ struct virtchnl_vlan_filter_list {
 
 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
 
+/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related
+ * structures and opcodes.
+ *
+ * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver
+ * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported
+ * by the PF concurrently. For example, if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it
+ * would OR the following in the virtchnl_vlan_filtering_caps.outer field:
+ *
+ * 	VIRTHCNL_VLAN_ETHERTYPE_8100 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_AND;
+ *
+ * The VF would interpret this as VLAN filtering can be supported on both 0x8100
+ * and 0x88A8 VLAN ethertypes.
+ *
+ * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported
+ * by the PF concurrently. For example if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping
+ * offload it would OR the following in the
+ * virtchnl_vlan_offload_caps.outer_stripping field:
+ *
+ * 	VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ * 	VIRTCHNL_VLAN_ETHERTYPE_XOR;
+ *
+ * The VF would interpret this as VLAN stripping can be supported on either
+ * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override
+ * the previously set value.
+ *
+ * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for
+ * VLAN filtering if the underlying PF supports it.
+ *
+ * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a
+ * certain VLAN capability can be toggled. For example if the underlying PF/CP
+ * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should
+ * set this bit along with the supported ethertypes.
+ */
+enum virtchnl_vlan_support {
+	VIRTCHNL_VLAN_UNSUPPORTED =	0,
+	VIRTCHNL_VLAN_ETHERTYPE_8100 =	0x0001,
+	VIRTCHNL_VLAN_ETHERTYPE_88A8 =	0x0002,
+	VIRTCHNL_VLAN_ETHERTYPE_9100 =	0x0004,
+	VIRTCHNL_VLAN_PRIO =		0x0100,
+	VIRTCHNL_VLAN_FILTER_MASK =	0x1000,
+	VIRTCHNL_VLAN_ETHERTYPE_AND =	0x2000,
+	VIRTCHNL_VLAN_ETHERTYPE_XOR =	0x4000,
+	VIRTCHNL_VLAN_TOGGLE =		0x8000,
+};
+
+/* The PF populates these fields based on the supported VLAN filtering. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using
+ * the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN filtering setting if the
+ * VIRTCHNL_VFLAN_TOGGLE_ALLOWED bit is set.
+ *
+ * The max_filters field tells the VF how many VLAN filters it's allowed to have
+ * at any one time. If it exceeds this amount and tries to add another filter,
+ * then the request will be rejected by the PF.
+ */
+struct virtchnl_vlan_filtering_caps {
+	u16 outer;
+	u16 inner;
+	u16 max_filters;
+	u8 pad[4];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(10, virtchnl_vlan_filtering_caps);
+
+/* This enum is used for the virtchnl_vlan_offload_caps structure to specify
+ * if the PF supports a different ethertype for stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified
+ * for stripping affect the ethertype(s) sepcified for insertion and visa versa
+ * as well. If the VF tries to configure VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then
+ * that will be the ethertype for both stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for
+ * stripping do not affect the ethertype(s) specified for insertion and visa
+ * versa.
+ */
+enum virtchnl_vlan_ethertype_match {
+	VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0,
+	VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,
+};
+
+/* The PF populates these fields based on the supported VLAN offloads. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN offload setting if the
+ * VIRTCHNL_VFLAN_TOGGLE_ALLOWED bit is set.
+ *
+ * The VF driver needs to be aware of how the tags are stipped by hardware and
+ * inserted by the VF driver based on the level of offload support.
+ *
+ * outer_stripping supported - VLAN tag stripped into L2TAG2 field by hardware
+ * outer_insertion supported - VLAN tag inserted into L2TAG2 field by VF driver
+ *
+ * inner_stripping supported - VLAN tag stripped into L2TAG1 field by hardware
+ * inner_insertion supported - VLAN tag inserted into L2TAG1 field by VF driver
+ */
+struct virtchnl_vlan_offload_caps {
+	u16 outer_stripping;
+	u16 inner_stripping;
+	u16 outer_insertion;
+	u16 inner_insertion;
+	u16 ethertype_init;
+	u8 ethertype_match;
+	u8 pad[3];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_vlan_offload_caps);
+
+/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
+ * VF sends this message to determine its VLAN capabilities.
+ *
+ * PF will mark which capabilities it supports based on hardware support and
+ * current configuration. For example, if a port VLAN is configured the PF will
+ * not allow outer VLAN filtering, stripping, or insertion to be configured so
+ * it will block these features from the VF.
+ *
+ * The VF will need to cross reference its capabilities with the PFs
+ * capabilities in the response message from the PF to determine the VLAN
+ * support.
+ */
+struct virtchnl_vlan_caps {
+	struct virtchnl_vlan_filtering_caps filtering;
+	struct virtchnl_vlan_offload_caps offloads;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_caps);
+
+struct virtchnl_vlan {
+	u16 tci;	/* tci[15:13] = PCP and tci[11:0] = VID */
+	u16 tci_mask;	/* only valid if VIRTCHNL_VLAN_FILTER_MASK set in filtering caps */
+	u16 tpid;	/* 0x8100, 0x88a8, etc. and only type(s) set in filtering caps */
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
+
+struct virtchnl_vlan_filter {
+	struct virtchnl_vlan inner;
+	struct virtchnl_vlan outer;
+	u8 pad[16];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
+
+/* VIRTCHNL_OP_ADD_VLAN_V2
+ * VIRTCHNL_OP_DEL_VLAN_V2
+ *
+ * VF sends these messages to add/del one or more VLAN tag filters for Rx traffic.
+ *
+ * The PF/CP attempts to add the filters and returns status.
+ *
+ * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the
+ * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
+ */
+struct virtchnl_vlan_filter_list_v2 {
+	u16 vport_id;
+	u16 num_elements;
+	u8 pad[4];
+	struct virtchnl_vlan_filter filters[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2);
+
+/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2
+ *
+ * VF sends this message to enable or disable VLAN stripping. It also needs to
+ * specify an ethertype. The VF knows which virtchnl_vlan_filter fields are
+ * allowed via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message.
+ */
+struct virtchnl_vlan_strip {
+	u16 vsi_id;
+	u16 outer_ethertype_setting;	/* 0x8100, 0x88a8, etc. and only type(s) set in the offload caps */
+	u16 inner_ethertype_setting;	/* 0x8100, 0x88a8, etc. and only type(s) set in the offload caps */
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan_strip);
+
 /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
  * VF sends VSI id and flags.
  * PF returns status code in retval.
@@ -754,6 +957,32 @@ struct virtchnl_pkg_info {
 
 VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_pkg_info);
 
+struct virtchnl_dcf_vlan_offload {
+	u16 vf_id;
+	u16 tpid;
+	u16 vlan_flags;
+#define VIRTCHNL_DCF_VLAN_TYPE_S		0
+#define VIRTCHNL_DCF_VLAN_TYPE_M		\
+			(0x1 << VIRTCHNL_DCF_VLAN_TYPE_S)
+#define VIRTCHNL_DCF_VLAN_TYPE_INNER		0x0
+#define VIRTCHNL_DCF_VLAN_TYPE_OUTER		0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_S		1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_M	\
+			(0x7 << VIRTCHNL_DCF_VLAN_INSERT_MODE_S)
+#define VIRTCHNL_DCF_VLAN_INSERT_DISABLE	0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_PORT_BASED	0x2
+#define VIRTCHNL_DCF_VLAN_INSERT_VIA_TX_DESC	0x3
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_S		4
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_M		\
+			(0x7 << VIRTCHNL_DCF_VLAN_STRIP_MODE_S)
+#define VIRTCHNL_DCF_VLAN_STRIP_DISABLE		0x1
+#define VIRTCHNL_DCF_VLAN_STRIP_ONLY		0x2
+#define VIRTCHNL_DCF_VLAN_STRIP_INTO_RX_DESC	0x3
+	u16 vlan_id;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_dcf_vlan_offload);
+
 struct virtchnl_supported_rxdids {
 	u64 supported_rxdids;
 };
@@ -1291,6 +1520,10 @@ enum virtchnl_vector_limits {
 	VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX	=
 		((u16)(~0) - sizeof(struct virtchnl_queue_vector_maps)) /
 		sizeof(struct virtchnl_queue_vector),
+
+	VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX		=
+		((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list_v2)) /
+		sizeof(struct virtchnl_vlan_filter),
 };
 
 /**
@@ -1465,6 +1698,9 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
 	case VIRTCHNL_OP_DEL_CLOUD_FILTER:
 		valid_len = sizeof(struct virtchnl_filter);
 		break;
+	case VIRTCHNL_OP_DCF_VLAN_OFFLOAD:
+		valid_len = sizeof(struct virtchnl_dcf_vlan_offload);
+		break;
 	case VIRTCHNL_OP_DCF_CMD_DESC:
 	case VIRTCHNL_OP_DCF_CMD_BUFF:
 		/* These two opcodes are specific to handle the AdminQ command,
@@ -1491,6 +1727,29 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
 	case VIRTCHNL_OP_QUERY_FDIR_FILTER:
 		valid_len = sizeof(struct virtchnl_fdir_query);
 		break;
+	case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
+		break;
+	case VIRTCHNL_OP_ADD_VLAN_V2:
+	case VIRTCHNL_OP_DEL_VLAN_V2:
+		valid_len = sizeof(struct virtchnl_vlan_filter_list_v2);
+		if (msglen >= valid_len) {
+			struct virtchnl_vlan_filter_list_v2 *vfl =
+			    (struct virtchnl_vlan_filter_list_v2 *)msg;
+
+			if (vfl->num_elements == 0 || vfl->num_elements >
+			    VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX) {
+				err_msg_format = true;
+				break;
+			}
+
+			valid_len += (vfl->num_elements - 1) *
+				sizeof(struct virtchnl_vlan_filter);
+		}
+		break;
+	case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
+	case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
+		valid_len = sizeof(struct virtchnl_vlan_strip);
+		break;
 	case VIRTCHNL_OP_ENABLE_QUEUES_V2:
 	case VIRTCHNL_OP_DISABLE_QUEUES_V2:
 		valid_len = sizeof(struct virtchnl_del_ena_dis_queues);
Signature · 1 line
2.29.2
#18 lore raw

PATCH v4 2/5 net/iavf: support Ethernet CRC strip disable

In reply to Haiyue Wang

The VF will check the PF's CRC strip capability firstly, then set the 'CRC strip disable' value in the queue configuration according to the RX CRC offload setting.

---
 drivers/net/iavf/iavf_ethdev.c | 3 +++
 drivers/net/iavf/iavf_rxtx.c   | 6 +++++-
 drivers/net/iavf/iavf_vchnl.c  | 3 ++-
 3 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/iavf/iavf_ethdev.c +3 -0
index 7bf31d4f4..49e6dd125 100644
@@ -800,6 +800,9 @@ iavf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		DEV_TX_OFFLOAD_MULTI_SEGS |
 		DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_CRC)
+		dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_KEEP_CRC;
+
 	dev_info->default_rxconf = (struct rte_eth_rxconf) {
 		.rx_free_thresh = IAVF_DEFAULT_RX_FREE_THRESH,
 		.rx_drop_en = 0,
drivers/net/iavf/iavf_rxtx.c +5 -1
index 21d508b3f..d53d7b984 100644
@@ -550,11 +550,15 @@ iavf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 	rxq->rx_free_thresh = rx_free_thresh;
 	rxq->queue_id = queue_idx;
 	rxq->port_id = dev->data->port_id;
-	rxq->crc_len = 0; /* crc stripping by default */
 	rxq->rx_deferred_start = rx_conf->rx_deferred_start;
 	rxq->rx_hdr_len = 0;
 	rxq->vsi = vsi;
 
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+		rxq->crc_len = RTE_ETHER_CRC_LEN;
+	else
+		rxq->crc_len = 0;
+
 	len = rte_pktmbuf_data_room_size(rxq->mp) - RTE_PKTMBUF_HEADROOM;
 	rxq->rx_buf_len = RTE_ALIGN(len, (1 << IAVF_RXQ_CTX_DBUFF_SHIFT));
 
drivers/net/iavf/iavf_vchnl.c +2 -1
index 25d5cdaf5..c33194cdc 100644
@@ -458,6 +458,7 @@ iavf_get_vf_resource(struct iavf_adapter *adapter)
 		VIRTCHNL_VF_OFFLOAD_FDIR_PF |
 		VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF |
 		VIRTCHNL_VF_OFFLOAD_REQ_QUEUES |
+		VIRTCHNL_VF_OFFLOAD_CRC |
 		VIRTCHNL_VF_LARGE_NUM_QPAIRS;
 
 	args.in_args = (uint8_t *)&caps;
@@ -853,7 +854,7 @@ iavf_configure_queues(struct iavf_adapter *adapter,
 		vc_qp->rxq.ring_len = rxq[i]->nb_rx_desc;
 		vc_qp->rxq.dma_ring_addr = rxq[i]->rx_ring_phys_addr;
 		vc_qp->rxq.databuffer_size = rxq[i]->rx_buf_len;
-
+		vc_qp->rxq.crc_disable = rxq[i]->crc_len != 0 ? 1 : 0;
 #ifndef RTE_LIBRTE_IAVF_16BYTE_RX_DESC
 		if (vf->vf_res->vf_cap_flags &
 		    VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC &&
Signature · 1 line
2.29.2
#19 lore raw

PATCH v4 3/5 net/ice: enable QinQ filter for switch

In reply to Haiyue Wang

Enable the double VLAN support for QinQ filter switch.

---
 drivers/net/ice/ice_generic_flow.c  |   8 +++
 drivers/net/ice/ice_generic_flow.h  |   1 +
 drivers/net/ice/ice_switch_filter.c | 104 +++++++++++++++++++++++++---
 3 files changed, 102 insertions(+), 11 deletions(-)
drivers/net/ice/ice_generic_flow.c +8 -0
index 1429cbc3b..1712d3b2e 100644
@@ -1455,6 +1455,14 @@ enum rte_flow_item_type pattern_eth_qinq_pppoes[] = {
 	RTE_FLOW_ITEM_TYPE_PPPOES,
 	RTE_FLOW_ITEM_TYPE_END,
 };
+enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[] = {
+	RTE_FLOW_ITEM_TYPE_ETH,
+	RTE_FLOW_ITEM_TYPE_VLAN,
+	RTE_FLOW_ITEM_TYPE_VLAN,
+	RTE_FLOW_ITEM_TYPE_PPPOES,
+	RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID,
+	RTE_FLOW_ITEM_TYPE_END,
+};
 enum rte_flow_item_type pattern_eth_pppoes_ipv4[] = {
 	RTE_FLOW_ITEM_TYPE_ETH,
 	RTE_FLOW_ITEM_TYPE_PPPOES,
drivers/net/ice/ice_generic_flow.h +1 -0
index 434d2f425..dc45d8dc6 100644
@@ -426,6 +426,7 @@ extern enum rte_flow_item_type pattern_eth_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_qinq_pppoes[];
+extern enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[];
 extern enum rte_flow_item_type pattern_eth_pppoes_ipv4[];
 extern enum rte_flow_item_type pattern_eth_vlan_pppoes_ipv4[];
 extern enum rte_flow_item_type pattern_eth_qinq_pppoes_ipv4[];
drivers/net/ice/ice_switch_filter.c +93 -11

189 lines not on this page · raw message

Signature · 1 line
2.29.2
#20 lore raw

PATCH v4 4/5 net/ice: add the DCF VLAN handling

In reply to Haiyue Wang

Add the DCF port representor infrastructure for the VFs of DCF attached PF. Then the standard ethdev API like VLAN can be used to configure the VFs.

---
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  20 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 356 +++++++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 5 files changed, 462 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
drivers/net/ice/ice_dcf.c +1 -0
index 44dbd3bb8..4a9af3292 100644
@@ -234,6 +234,7 @@ ice_dcf_get_vf_resource(struct ice_dcf_hw *hw)
 
 	caps = VIRTCHNL_VF_OFFLOAD_WB_ON_ITR | VIRTCHNL_VF_OFFLOAD_RX_POLLING |
 	       VIRTCHNL_VF_CAP_ADV_LINK_SPEED | VIRTCHNL_VF_CAP_DCF |
+	       VIRTCHNL_VF_OFFLOAD_VLAN_V2 |
 	       VF_BASE_MODE_OFFLOADS | VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC;
 
 	err = ice_dcf_send_cmd_req_no_irq(hw, VIRTCHNL_OP_GET_VF_RESOURCES,
drivers/net/ice/ice_dcf_ethdev.c +84 -7

104 lines not on this page · raw message

drivers/net/ice/ice_dcf_ethdev.h +20 -0
index b54528bea..bd5552332 100644
@@ -22,9 +22,29 @@ struct ice_dcf_adapter {
 	struct ice_dcf_hw real_hw;
 };
 
+struct ice_dcf_vf_repr_param {
+	struct ice_dcf_adapter *adapter;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+};
+
+struct ice_dcf_vf_repr {
+	struct ice_dcf_adapter *dcf_adapter;
+	struct rte_ether_addr mac_addr;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+
+	uint16_t outer_vlan_tpid;
+	uint16_t pvid;
+	uint16_t hw_vlan_insert_pvid:1;
+};
+
 void ice_dcf_handle_pf_event_msg(struct ice_dcf_hw *dcf_hw,
 				 uint8_t *msg, uint16_t msglen);
 int ice_dcf_init_parent_adapter(struct rte_eth_dev *eth_dev);
 void ice_dcf_uninit_parent_adapter(struct rte_eth_dev *eth_dev);
 
+int ice_dcf_vf_repr_init(struct rte_eth_dev *ethdev, void *init_param);
+int ice_dcf_vf_repr_uninit(struct rte_eth_dev *ethdev);
+
 #endif /* _ICE_DCF_ETHDEV_H_ */
drivers/net/ice/ice_dcf_vf_representor.c new file +356 -0

356 lines not on this page · raw message

drivers/net/ice/meson.build +1 -0
index 7b291269d..d58936089 100644
@@ -61,6 +61,7 @@ if arch_subdir == 'x86'
 endif
 
 sources += files('ice_dcf.c',
+		 'ice_dcf_vf_representor.c',
 		 'ice_dcf_ethdev.c',
 		 'ice_dcf_parent.c')
 
Signature · 1 line
2.29.2
#21 lore raw

PATCH v4 5/5 net/iavf: implement new VLAN capability handling

In reply to Haiyue Wang

The new VLAN virtchnl opcodes introduce new settings like different TPID filtering, stripping.

Query the PF's VLAN capabilities based on current device configuration, then set the ethdev VLAN information that the VF can support.

The VLAN filtering and offload acceleration should be performed on the outer VLAN tag when the double VLAN mode is enabled on the PF:
a). 0x8100
b). 0x8100 + 0x8100
c). 0x9100 + 0x8100
d). 0x88a8 + 0x8100

---
 drivers/net/iavf/iavf.h        |  10 +++
 drivers/net/iavf/iavf_ethdev.c | 114 ++++++++++++++++++++++++++
 drivers/net/iavf/iavf_vchnl.c  | 141 +++++++++++++++++++++++++++++++++
 3 files changed, 265 insertions(+)
drivers/net/iavf/iavf.h +10 -0
index 9754273b2..c5d53bd9c 100644
@@ -139,6 +139,7 @@ struct iavf_info {
 	struct virtchnl_version_info virtchnl_version;
 	struct virtchnl_vf_resource *vf_res; /* VF resource */
 	struct virtchnl_vsi_resource *vsi_res; /* LAN VSI */
+	struct virtchnl_vlan_caps vlan_v2_caps;
 	uint64_t supported_rxdid;
 	uint8_t *proto_xtr; /* proto xtr type for all queues */
 	volatile enum virtchnl_ops pend_cmd; /* pending command not finished */
@@ -173,6 +174,10 @@ struct iavf_info {
 	struct iavf_fdir_info fdir; /* flow director info */
 	/* indicate large VF support enabled or not */
 	bool lv_enabled;
+
+	/* used to set the VLAN Ethernet type for virtchnl VLAN V2 */
+	uint16_t outer_vlan_tpid;
+	uint16_t inner_vlan_tpid;
 };
 
 #define IAVF_MAX_PKT_TYPE 1024
@@ -297,6 +302,8 @@ int iavf_get_vf_resource(struct iavf_adapter *adapter);
 void iavf_handle_virtchnl_msg(struct rte_eth_dev *dev);
 int iavf_enable_vlan_strip(struct iavf_adapter *adapter);
 int iavf_disable_vlan_strip(struct iavf_adapter *adapter);
+int iavf_config_vlan_strip_v2(struct iavf_adapter *adapter, uint16_t tpid,
+			      bool enable);
 int iavf_switch_queue(struct iavf_adapter *adapter, uint16_t qid,
 		     bool rx, bool on);
 int iavf_switch_queue_lv(struct iavf_adapter *adapter, uint16_t qid,
@@ -310,6 +317,7 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter);
 int iavf_configure_queues(struct iavf_adapter *adapter,
 			uint16_t num_queue_pairs, uint16_t index);
 int iavf_get_supported_rxdid(struct iavf_adapter *adapter);
+int iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter);
 int iavf_config_irq_map(struct iavf_adapter *adapter);
 int iavf_config_irq_map_lv(struct iavf_adapter *adapter, uint16_t num,
 			uint16_t index);
@@ -323,6 +331,8 @@ int iavf_config_promisc(struct iavf_adapter *adapter, bool enable_unicast,
 int iavf_add_del_eth_addr(struct iavf_adapter *adapter,
 			 struct rte_ether_addr *addr, bool add);
 int iavf_add_del_vlan(struct iavf_adapter *adapter, uint16_t vlanid, bool add);
+int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t tpid,
+			 uint16_t vlanid, bool add);
 int iavf_fdir_add(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);
 int iavf_fdir_del(struct iavf_adapter *adapter, struct iavf_fdir_conf *filter);
 int iavf_fdir_check(struct iavf_adapter *adapter,
drivers/net/iavf/iavf_ethdev.c +114 -0

174 lines not on this page · raw message

drivers/net/iavf/iavf_vchnl.c +141 -0

177 lines not on this page · raw message

Signature · 1 line
2.29.2
#22 lore raw

v5 cover Add AVF & DCF VLAN feaure

In reply to Haiyue Wang

Add new VLAN feature, which has rich settings.

v5: seperate the QinQ switch filter with another thead.
v4: make code readable for QinQ TPID setting.
v3: code refactor for handing QinQ according to the VC response.

Note:

Patch [1] is used to start CI checking, it will be sent
by: https://patchwork.dpdk.org/cover/86137/

Haiyue Wang (4):
common/iavf: new VLAN opcode - [1] net/iavf: support Ethernet CRC strip disable net/ice: add the DCF VLAN handling net/iavf: implement new VLAN capability handling

 drivers/common/iavf/virtchnl.h           | 416 +++++++++++++++++++++++
 drivers/net/iavf/iavf.h                  |   6 +
 drivers/net/iavf/iavf_ethdev.c           | 120 ++++++-
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 123 ++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 ++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  24 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 334 ++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 10 files changed, 1106 insertions(+), 16 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
Signature · 1 line
2.30.0
#23 lore raw

PATCH v5 1/4 common/iavf: new VLAN opcode

Add new VLAN opcode support.

---
 drivers/common/iavf/virtchnl.h | 416 +++++++++++++++++++++++++++++++++
 1 file changed, 416 insertions(+)
drivers/common/iavf/virtchnl.h +416 -0
index fcbaa31fa..b549a853c 100644
@@ -129,6 +129,7 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
 	VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
 	/* opcodes 34, 35, 36, 37 and 38 are reserved */
+	VIRTCHNL_OP_DCF_VLAN_OFFLOAD = 38,
 	VIRTCHNL_OP_DCF_CMD_DESC = 39,
 	VIRTCHNL_OP_DCF_CMD_BUFF = 40,
 	VIRTCHNL_OP_DCF_DISABLE = 41,
@@ -141,6 +142,13 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_DEL_FDIR_FILTER = 48,
 	VIRTCHNL_OP_QUERY_FDIR_FILTER = 49,
 	VIRTCHNL_OP_GET_MAX_RSS_QREGION = 50,
+	VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51,
+	VIRTCHNL_OP_ADD_VLAN_V2 = 52,
+	VIRTCHNL_OP_DEL_VLAN_V2 = 53,
+	VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54,
+	VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55,
+	VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56,
+	VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57,
 	VIRTCHNL_OP_ENABLE_QUEUES_V2 = 107,
 	VIRTCHNL_OP_DISABLE_QUEUES_V2 = 108,
 	VIRTCHNL_OP_MAP_QUEUE_VECTOR = 111,
@@ -251,6 +259,7 @@ VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
 #define VIRTCHNL_VF_OFFLOAD_CRC			0x00000080
 	/* 0X00000100 is reserved */
 #define VIRTCHNL_VF_LARGE_NUM_QPAIRS		0x00000200
+#define VIRTCHNL_VF_OFFLOAD_VLAN_V2		0x00008000
 #define VIRTCHNL_VF_OFFLOAD_VLAN		0x00010000
 #define VIRTCHNL_VF_OFFLOAD_RX_POLLING		0x00020000
 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2	0x00040000
@@ -536,6 +545,349 @@ struct virtchnl_vlan_filter_list {
 
 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
 
+/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related
+ * structures and opcodes.
+ *
+ * VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver
+ * populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype.
+ * VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype.
+ *
+ * VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported
+ * by the PF concurrently. For example, if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it
+ * would OR the following bits:
+ *
+ *	VIRTHCNL_VLAN_ETHERTYPE_8100 |
+ *	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ *	VIRTCHNL_VLAN_ETHERTYPE_AND;
+ *
+ * The VF would interpret this as VLAN filtering can be supported on both 0x8100
+ * and 0x88A8 VLAN ethertypes.
+ *
+ * VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported
+ * by the PF concurrently. For example if the PF can support
+ * VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping
+ * offload it would OR the following bits:
+ *
+ *	VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ *	VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ *	VIRTCHNL_VLAN_ETHERTYPE_XOR;
+ *
+ * The VF would interpret this as VLAN stripping can be supported on either
+ * 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override
+ * the previously set value.
+ *
+ * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or
+ * strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors.
+ *
+ * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware
+ * offloaded VLAN tags using the L2TAG2 field of the Tx descriptor.
+ *
+ * VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware
+ * offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor.
+ *
+ * VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for
+ * VLAN filtering if the underlying PF supports it.
+ *
+ * VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a
+ * certain VLAN capability can be toggled. For example if the underlying PF/CP
+ * allows the VF to toggle VLAN filtering, stripping, and/or insertion it should
+ * set this bit along with the supported ethertypes.
+ */
+enum virtchnl_vlan_support {
+	VIRTCHNL_VLAN_UNSUPPORTED =		0,
+	VIRTCHNL_VLAN_ETHERTYPE_8100 =		0x00000001,
+	VIRTCHNL_VLAN_ETHERTYPE_88A8 =		0x00000002,
+	VIRTCHNL_VLAN_ETHERTYPE_9100 =		0x00000004,
+	VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 =	0x00000100,
+	VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 =	0x00000200,
+	VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 =	0x00000400,
+	VIRTCHNL_VLAN_PRIO =			0x01000000,
+	VIRTCHNL_VLAN_FILTER_MASK =		0x10000000,
+	VIRTCHNL_VLAN_ETHERTYPE_AND =		0x20000000,
+	VIRTCHNL_VLAN_ETHERTYPE_XOR =		0x40000000,
+	VIRTCHNL_VLAN_TOGGLE =			0x80000000
+};
+
+/* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
+ * for filtering, insertion, and stripping capabilities.
+ *
+ * If only outer capabilities are supported (for filtering, insertion, and/or
+ * stripping) then this refers to the outer most or single VLAN from the VF's
+ * perspective.
+ *
+ * If only inner capabilities are supported (for filtering, insertion, and/or
+ * stripping) then this refers to the outer most or single VLAN from the VF's
+ * perspective.
+ *
+ * If both outer and inner capabilities are supported (for filtering, insertion,
+ * and/or stripping) then outer refers to the outer most or single VLAN and
+ * inner refers to the second VLAN, if it exists, in the packet.
+ *
+ * There is no support for tunneled VLAN offloads, so outer or inner are never
+ * referring to a tunneled packet from the VF's perspective.
+ */
+struct virtchnl_vlan_supported_caps {
+	u32 outer;
+	u32 inner;
+};
+
+/* The PF populates these fields based on the supported VLAN filtering. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using
+ * the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN filtering setting if the
+ * VIRTCHNL_VLAN_TOGGLE bit is set.
+ *
+ * The ethertype(s) specified in the ethertype_init field are the ethertypes
+ * enabled for VLAN filtering. VLAN filtering in this case refers to the outer
+ * most VLAN from the VF's perspective. If both inner and outer filtering are
+ * allowed then ethertype_init only refers to the outer most VLAN as only
+ * VLAN ethertype supported for inner VLAN filtering is
+ * VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled
+ * when both inner and outer filtering are allowed.
+ *
+ * The max_filters field tells the VF how many VLAN filters it's allowed to have
+ * at any one time. If it exceeds this amount and tries to add another filter,
+ * then the request will be rejected by the PF. To prevent failures, the VF
+ * should keep track of how many VLAN filters it has added and not attempt to
+ * add more than max_filters.
+ */
+struct virtchnl_vlan_filtering_caps {
+	struct virtchnl_vlan_supported_caps filtering_support;
+	u32 ethertype_init;
+	u16 max_filters;
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps);
+
+/* This enum is used for the virtchnl_vlan_offload_caps structure to specify
+ * if the PF supports a different ethertype for stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified
+ * for stripping affect the ethertype(s) sepcified for insertion and visa versa
+ * as well. If the VF tries to configure VLAN stripping via
+ * VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then
+ * that will be the ethertype for both stripping and insertion.
+ *
+ * VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for
+ * stripping do not affect the ethertype(s) specified for insertion and visa
+ * versa.
+ */
+enum virtchnl_vlan_ethertype_match {
+	VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0,
+	VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,
+};
+
+/* The PF populates these fields based on the supported VLAN offloads. If a
+ * field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
+ * reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields.
+ *
+ * Also, a VF is only allowed to toggle its VLAN offload setting if the
+ * VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set.
+ *
+ * The VF driver needs to be aware of how the tags are stipped by hardware and
+ * inserted by the VF driver based on the level of offload support. The PF will
+ * populate these fields based on where the VLAN tags are expected to be
+ * offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to
+ * interpret these fields. See the definition of the
+ * VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support
+ * enumeration.
+ */
+struct virtchnl_vlan_offload_caps {
+	struct virtchnl_vlan_supported_caps stripping_support;
+	struct virtchnl_vlan_supported_caps insertion_support;
+	u32 ethertype_init;
+	u8 ethertype_match;
+	u8 pad[3];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps);
+
+/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
+ * VF sends this message to determine its VLAN capabilities.
+ *
+ * PF will mark which capabilities it supports based on hardware support and
+ * current configuration. For example, if a port VLAN is configured the PF will
+ * not allow outer VLAN filtering, stripping, or insertion to be configured so
+ * it will block these features from the VF.
+ *
+ * The VF will need to cross reference its capabilities with the PFs
+ * capabilities in the response message from the PF to determine the VLAN
+ * support.
+ */
+struct virtchnl_vlan_caps {
+	struct virtchnl_vlan_filtering_caps filtering;
+	struct virtchnl_vlan_offload_caps offloads;
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps);
+
+struct virtchnl_vlan {
+	u16 tci;	/* tci[15:13] = PCP and tci[11:0] = VID */
+	u16 tci_mask;	/* only valid if VIRTCHNL_VLAN_FILTER_MASK set in
+			 * filtering caps
+			 */
+	u16 tpid;	/* 0x8100, 0x88a8, etc. and only type(s) set in
+			 * filtering caps. Note that tpid here does not refer to
+			 * VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the
+			 * actual 2-byte VLAN TPID
+			 */
+	u8 pad[2];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
+
+struct virtchnl_vlan_filter {
+	struct virtchnl_vlan inner;
+	struct virtchnl_vlan outer;
+	u8 pad[16];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
+
+/* VIRTCHNL_OP_ADD_VLAN_V2
+ * VIRTCHNL_OP_DEL_VLAN_V2
+ *
+ * VF sends these messages to add/del one or more VLAN tag filters for Rx
+ * traffic.
+ *
+ * The PF attempts to add the filters and returns status.
+ *
+ * The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the
+ * supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
+ */
+struct virtchnl_vlan_filter_list_v2 {
+	u16 vport_id;
+	u16 num_elements;
+	u8 pad[4];
+	struct virtchnl_vlan_filter filters[1];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2);
+
+/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2
+ * VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2
+ * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2
+ * VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2
+ *
+ * VF sends this message to enable or disable VLAN stripping or insertion. It
+ * also needs to specify an ethertype. The VF knows which VLAN ethertypes are
+ * allowed and whether or not it's allowed to enable/disable the specific
+ * offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to
+ * parse the virtchnl_vlan_caps.offloads fields to determine which offload
+ * messages are allowed.
+ *
+ * For example, if the PF populates the virtchnl_vlan_caps.offloads in the
+ * following manner the VF will be allowed to enable and/or disable 0x8100 inner
+ * VLAN insertion and/or stripping via the opcodes listed above. Inner in this
+ * case means the outer most or single VLAN from the VF's perspective. This is
+ * because no outer offloads are supported. See the comments above the
+ * virtchnl_vlan_supported_caps structure for more details.
+ *
+ * virtchnl_vlan_caps.offloads.stripping_support.inner =
+ *			VIRTCHNL_VLAN_TOGGLE |
+ *			VIRTCHNL_VLAN_ETHERTYPE_8100;
+ *
+ * virtchnl_vlan_caps.offloads.insertion_support.inner =
+ *			VIRTCHNL_VLAN_TOGGLE |
+ *			VIRTCHNL_VLAN_ETHERTYPE_8100;
+ *
+ * In order to enable inner (again note that in this case inner is the outer
+ * most or single VLAN from the VF's perspective) VLAN stripping for 0x8100
+ * VLANs, the VF would populate the virtchnl_vlan_offload structure in the
+ * following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
+ *
+ * virtchnl_vlan_offload.inner_ethertype_setting =
+ *			VIRTCHNL_VLAN_ETHERTYPE_8100;
+ *
+ * virtchnl_vlan_offload.vport_id = vport_id or vsi_id assigned to the VF on
+ * initialization.
+ *
+ * The reason that VLAN TPID(s) are not being used for the
+ * outer_ethertype_setting and inner_ethertype_setting fields is because it's
+ * possible a device could support VLAN insertion and/or stripping offload on
+ * multiple ethertypes concurrently, so this method allows a VF to request
+ * multiple ethertypes in one message using the virtchnl_vlan_support
+ * enumeration.
+ *
+ * For example, if the PF populates the virtchnl_vlan_caps.offloads in the
+ * following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer
+ * VLAN insertion and stripping simultaneously. The
+ * virtchnl_vlan_caps.offloads.ethertype_match field will  also have to be
+ * populated based on what the PF can support.
+ *
+ * virtchnl_vlan_caps.offloads.stripping_support.outer =
+ *			VIRTCHNL_VLAN_TOGGLE |
+ *			VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_AND;
+ *
+ * virtchnl_vlan_caps.offloads.insertion_support.outer =
+ *			VIRTCHNL_VLAN_TOGGLE |
+ *			VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_AND;
+ *
+ * In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF
+ * would populate the virthcnl_vlan_offload_structure in the following manner
+ * and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
+ *
+ * virtchnl_vlan_offload.outer_ethertype_setting =
+ *			VIRTHCNL_VLAN_ETHERTYPE_8100 |
+ *			VIRTHCNL_VLAN_ETHERTYPE_88A8;
+ *
+ * virtchnl_vlan_offload.vport_id = vport_id or vsi_id assigned to the VF on
+ * initialization.
+ *
+ * There is also the case where a PF and the underlying hardware can support
+ * VLAN offloads on multiple ethertypes, but not concurrently. For example, if
+ * the PF populates the virtchnl_vlan_caps.offloads in the following manner the
+ * VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN
+ * offloads. The ethertypes must match for stripping and insertion.
+ *
+ * virtchnl_vlan_caps.offloads.stripping_support.outer =
+ *			VIRTCHNL_VLAN_TOGGLE |
+ *			VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_XOR;
+ *
+ * virtchnl_vlan_caps.offloads.insertion_support.outer =
+ *			VIRTCHNL_VLAN_TOGGLE |
+ *			VIRTCHNL_VLAN_ETHERTYPE_8100 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_88A8 |
+ *			VIRTCHNL_VLAN_ETHERTYPE_XOR;
+ *
+ * virtchnl_vlan_caps.offloads.ethertype_match =
+ *			VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION;
+ *
+ * In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would
+ * populate the virtchnl_vlan_offload_structure in the following manner and send
+ * the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the
+ * ethertype for VLAN insertion if it's enabled. So, for completeness, a
+ * VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent.
+ *
+ * virtchnl_vlan_offload.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8;
+ *
+ * virtchnl_vlan_offload.vport_id = vport_id or vsi_id assigned to the VF on
+ * initialization.
+ */
+struct virtchnl_vlan_offload {
+	u32 outer_ethertype_setting;
+	u32 inner_ethertype_setting;
+	u16 vport_id;
+	u8 pad[6];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_offload);
+
 /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
  * VF sends VSI id and flags.
  * PF returns status code in retval.
@@ -754,6 +1106,38 @@ struct virtchnl_pkg_info {
 
 VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_pkg_info);
 
+/* VIRTCHNL_OP_DCF_VLAN_OFFLOAD
+ * DCF negotiates the VIRTCHNL_VF_OFFLOAD_VLAN_V2 capabilitiy firstly to get
+ * the double VLAN configuration, then DCF sends this message to configure the
+ * outer or inner VLAN offloads (insertion and strip) for the target VF.
+ */
+struct virtchnl_dcf_vlan_offload {
+	u16 vf_id;
+	u16 tpid;
+	u16 vlan_flags;
+#define VIRTCHNL_DCF_VLAN_TYPE_S		0
+#define VIRTCHNL_DCF_VLAN_TYPE_M		\
+			(0x1 << VIRTCHNL_DCF_VLAN_TYPE_S)
+#define VIRTCHNL_DCF_VLAN_TYPE_INNER		0x0
+#define VIRTCHNL_DCF_VLAN_TYPE_OUTER		0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_S		1
+#define VIRTCHNL_DCF_VLAN_INSERT_MODE_M	\
+			(0x7 << VIRTCHNL_DCF_VLAN_INSERT_MODE_S)
+#define VIRTCHNL_DCF_VLAN_INSERT_DISABLE	0x1
+#define VIRTCHNL_DCF_VLAN_INSERT_PORT_BASED	0x2
+#define VIRTCHNL_DCF_VLAN_INSERT_VIA_TX_DESC	0x3
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_S		4
+#define VIRTCHNL_DCF_VLAN_STRIP_MODE_M		\
+			(0x7 << VIRTCHNL_DCF_VLAN_STRIP_MODE_S)
+#define VIRTCHNL_DCF_VLAN_STRIP_DISABLE		0x1
+#define VIRTCHNL_DCF_VLAN_STRIP_ONLY		0x2
+#define VIRTCHNL_DCF_VLAN_STRIP_INTO_RX_DESC	0x3
+	u16 vlan_id;
+	u16 pad[4];
+};
+
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_dcf_vlan_offload);
+
 struct virtchnl_supported_rxdids {
 	u64 supported_rxdids;
 };
@@ -1291,6 +1675,10 @@ enum virtchnl_vector_limits {
 	VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX	=
 		((u16)(~0) - sizeof(struct virtchnl_queue_vector_maps)) /
 		sizeof(struct virtchnl_queue_vector),
+
+	VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX		=
+		((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list_v2)) /
+		sizeof(struct virtchnl_vlan_filter),
 };
 
 /**
@@ -1465,6 +1853,9 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
 	case VIRTCHNL_OP_DEL_CLOUD_FILTER:
 		valid_len = sizeof(struct virtchnl_filter);
 		break;
+	case VIRTCHNL_OP_DCF_VLAN_OFFLOAD:
+		valid_len = sizeof(struct virtchnl_dcf_vlan_offload);
+		break;
 	case VIRTCHNL_OP_DCF_CMD_DESC:
 	case VIRTCHNL_OP_DCF_CMD_BUFF:
 		/* These two opcodes are specific to handle the AdminQ command,
@@ -1491,6 +1882,31 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
 	case VIRTCHNL_OP_QUERY_FDIR_FILTER:
 		valid_len = sizeof(struct virtchnl_fdir_query);
 		break;
+	case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
+		break;
+	case VIRTCHNL_OP_ADD_VLAN_V2:
+	case VIRTCHNL_OP_DEL_VLAN_V2:
+		valid_len = sizeof(struct virtchnl_vlan_filter_list_v2);
+		if (msglen >= valid_len) {
+			struct virtchnl_vlan_filter_list_v2 *vfl =
+			    (struct virtchnl_vlan_filter_list_v2 *)msg;
+
+			if (vfl->num_elements == 0 || vfl->num_elements >
+			    VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX) {
+				err_msg_format = true;
+				break;
+			}
+
+			valid_len += (vfl->num_elements - 1) *
+				sizeof(struct virtchnl_vlan_filter);
+		}
+		break;
+	case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
+	case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
+	case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2:
+	case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2:
+		valid_len = sizeof(struct virtchnl_vlan_offload);
+		break;
 	case VIRTCHNL_OP_ENABLE_QUEUES_V2:
 	case VIRTCHNL_OP_DISABLE_QUEUES_V2:
 		valid_len = sizeof(struct virtchnl_del_ena_dis_queues);
Signature · 1 line
2.30.0
#24 lore raw

PATCH v5 2/4 net/iavf: support Ethernet CRC strip disable

In reply to Haiyue Wang

The VF will check the PF's CRC strip capability firstly, then set the 'CRC strip disable' value in the queue configuration according to the RX CRC offload setting.

---
 drivers/net/iavf/iavf_ethdev.c | 3 +++
 drivers/net/iavf/iavf_rxtx.c   | 6 +++++-
 drivers/net/iavf/iavf_vchnl.c  | 3 ++-
 3 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/iavf/iavf_ethdev.c +3 -0
index 7bf31d4f4..49e6dd125 100644
@@ -800,6 +800,9 @@ iavf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		DEV_TX_OFFLOAD_MULTI_SEGS |
 		DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_CRC)
+		dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_KEEP_CRC;
+
 	dev_info->default_rxconf = (struct rte_eth_rxconf) {
 		.rx_free_thresh = IAVF_DEFAULT_RX_FREE_THRESH,
 		.rx_drop_en = 0,
drivers/net/iavf/iavf_rxtx.c +5 -1
index 21d508b3f..d53d7b984 100644
@@ -550,11 +550,15 @@ iavf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 	rxq->rx_free_thresh = rx_free_thresh;
 	rxq->queue_id = queue_idx;
 	rxq->port_id = dev->data->port_id;
-	rxq->crc_len = 0; /* crc stripping by default */
 	rxq->rx_deferred_start = rx_conf->rx_deferred_start;
 	rxq->rx_hdr_len = 0;
 	rxq->vsi = vsi;
 
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+		rxq->crc_len = RTE_ETHER_CRC_LEN;
+	else
+		rxq->crc_len = 0;
+
 	len = rte_pktmbuf_data_room_size(rxq->mp) - RTE_PKTMBUF_HEADROOM;
 	rxq->rx_buf_len = RTE_ALIGN(len, (1 << IAVF_RXQ_CTX_DBUFF_SHIFT));
 
drivers/net/iavf/iavf_vchnl.c +2 -1
index 25d5cdaf5..c33194cdc 100644
@@ -458,6 +458,7 @@ iavf_get_vf_resource(struct iavf_adapter *adapter)
 		VIRTCHNL_VF_OFFLOAD_FDIR_PF |
 		VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF |
 		VIRTCHNL_VF_OFFLOAD_REQ_QUEUES |
+		VIRTCHNL_VF_OFFLOAD_CRC |
 		VIRTCHNL_VF_LARGE_NUM_QPAIRS;
 
 	args.in_args = (uint8_t *)&caps;
@@ -853,7 +854,7 @@ iavf_configure_queues(struct iavf_adapter *adapter,
 		vc_qp->rxq.ring_len = rxq[i]->nb_rx_desc;
 		vc_qp->rxq.dma_ring_addr = rxq[i]->rx_ring_phys_addr;
 		vc_qp->rxq.databuffer_size = rxq[i]->rx_buf_len;
-
+		vc_qp->rxq.crc_disable = rxq[i]->crc_len != 0 ? 1 : 0;
 #ifndef RTE_LIBRTE_IAVF_16BYTE_RX_DESC
 		if (vf->vf_res->vf_cap_flags &
 		    VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC &&
Signature · 1 line
2.30.0
#25 lore raw

PATCH v5 3/4 net/ice: add the DCF VLAN handling

In reply to Haiyue Wang

Add the DCF port representor infrastructure for the VFs of DCF attached PF. Then the standard ethdev API like VLAN can be used to configure the VFs.

---
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  24 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 334 +++++++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 5 files changed, 444 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
drivers/net/ice/ice_dcf.c +1 -0
index 44dbd3bb8..4a9af3292 100644
@@ -234,6 +234,7 @@ ice_dcf_get_vf_resource(struct ice_dcf_hw *hw)
 
 	caps = VIRTCHNL_VF_OFFLOAD_WB_ON_ITR | VIRTCHNL_VF_OFFLOAD_RX_POLLING |
 	       VIRTCHNL_VF_CAP_ADV_LINK_SPEED | VIRTCHNL_VF_CAP_DCF |
+	       VIRTCHNL_VF_OFFLOAD_VLAN_V2 |
 	       VF_BASE_MODE_OFFLOADS | VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC;
 
 	err = ice_dcf_send_cmd_req_no_irq(hw, VIRTCHNL_OP_GET_VF_RESOURCES,
drivers/net/ice/ice_dcf_ethdev.c +84 -7

104 lines not on this page · raw message

drivers/net/ice/ice_dcf_ethdev.h +24 -0
index b54528bea..7695815e1 100644
@@ -22,9 +22,33 @@ struct ice_dcf_adapter {
 	struct ice_dcf_hw real_hw;
 };
 
+struct ice_dcf_vf_repr_param {
+	struct ice_dcf_adapter *adapter;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+};
+
+struct ice_dcf_vlan {
+	uint16_t tpid;
+	uint16_t vid;
+};
+
+struct ice_dcf_vf_repr {
+	struct ice_dcf_adapter *dcf_adapter;
+	struct rte_ether_addr mac_addr;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+
+	bool port_vlan_ena;
+	struct ice_dcf_vlan port_vlan_info;
+};
+
 void ice_dcf_handle_pf_event_msg(struct ice_dcf_hw *dcf_hw,
 				 uint8_t *msg, uint16_t msglen);
 int ice_dcf_init_parent_adapter(struct rte_eth_dev *eth_dev);
 void ice_dcf_uninit_parent_adapter(struct rte_eth_dev *eth_dev);
 
+int ice_dcf_vf_repr_init(struct rte_eth_dev *ethdev, void *init_param);
+int ice_dcf_vf_repr_uninit(struct rte_eth_dev *ethdev);
+
 #endif /* _ICE_DCF_ETHDEV_H_ */
drivers/net/ice/ice_dcf_vf_representor.c new file +334 -0

334 lines not on this page · raw message

drivers/net/ice/meson.build +1 -0
index 7b291269d..d58936089 100644
@@ -61,6 +61,7 @@ if arch_subdir == 'x86'
 endif
 
 sources += files('ice_dcf.c',
+		 'ice_dcf_vf_representor.c',
 		 'ice_dcf_ethdev.c',
 		 'ice_dcf_parent.c')
 
Signature · 1 line
2.30.0
#26 lore raw

PATCH v5 4/4 net/iavf: implement new VLAN capability handling

In reply to Haiyue Wang

The new VLAN virtchnl opcodes introduce new capabilities like VLAN filtering, stripping and insertion.

The VF needs to query the VLAN capabilities based on current device configuration firstly.

---
 drivers/net/iavf/iavf.h        |   6 ++
 drivers/net/iavf/iavf_ethdev.c | 117 ++++++++++++++++++++++++++++++--
 drivers/net/iavf/iavf_vchnl.c  | 120 +++++++++++++++++++++++++++++++++
 3 files changed, 236 insertions(+), 7 deletions(-)
drivers/net/iavf/iavf.h +6 -0
index 9754273b2..af11268fe 100644
@@ -139,6 +139,7 @@ struct iavf_info {
 	struct virtchnl_version_info virtchnl_version;
 	struct virtchnl_vf_resource *vf_res; /* VF resource */
 	struct virtchnl_vsi_resource *vsi_res; /* LAN VSI */
+	struct virtchnl_vlan_caps vlan_v2_caps;
 	uint64_t supported_rxdid;
 	uint8_t *proto_xtr; /* proto xtr type for all queues */
 	volatile enum virtchnl_ops pend_cmd; /* pending command not finished */
@@ -310,6 +311,11 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter);
 int iavf_configure_queues(struct iavf_adapter *adapter,
 			uint16_t num_queue_pairs, uint16_t index);
 int iavf_get_supported_rxdid(struct iavf_adapter *adapter);
+int iavf_config_vlan_strip_v2(struct iavf_adapter *adapter, bool enable);
+int iavf_config_vlan_insert_v2(struct iavf_adapter *adapter, bool enable);
+int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t vlanid,
+			 bool add);
+int iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter);
 int iavf_config_irq_map(struct iavf_adapter *adapter);
 int iavf_config_irq_map_lv(struct iavf_adapter *adapter, uint16_t num,
 			uint16_t index);
drivers/net/iavf/iavf_ethdev.c +110 -7

165 lines not on this page · raw message

drivers/net/iavf/iavf_vchnl.c +120 -0

138 lines not on this page · raw message

Signature · 1 line
2.30.0
#27 lore raw

v6 cover Add AVF & DCF VLAN feaure

In reply to Haiyue Wang

v6: code clean, and update the commit log.
v5: seperate the QinQ switch filter with another thead.
v4: make code readable for QinQ TPID setting.
v3: code refactor for handing QinQ according to the VC response.

Haiyue Wang (3):
net/iavf: support Ethernet CRC strip disable net/ice: add the DCF VLAN handling net/iavf: implement new VLAN capability handling

 drivers/net/iavf/iavf.h                  |   6 +
 drivers/net/iavf/iavf_ethdev.c           | 120 +++++++-
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 156 ++++++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  24 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 334 +++++++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 9 files changed, 723 insertions(+), 16 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
Signature · 1 line
2.30.0
#28 lore raw

PATCH v6 1/3 net/iavf: support Ethernet CRC strip disable

The VF will check the PF's CRC strip capability firstly, then set the 'CRC strip disable' value in the queue configuration according to the RX CRC offload setting.

---
 drivers/net/iavf/iavf_ethdev.c | 3 +++
 drivers/net/iavf/iavf_rxtx.c   | 6 +++++-
 drivers/net/iavf/iavf_vchnl.c  | 3 ++-
 3 files changed, 10 insertions(+), 2 deletions(-)
drivers/net/iavf/iavf_ethdev.c +3 -0
index 7bf31d4f4..49e6dd125 100644
@@ -800,6 +800,9 @@ iavf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		DEV_TX_OFFLOAD_MULTI_SEGS |
 		DEV_TX_OFFLOAD_MBUF_FAST_FREE;
 
+	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_CRC)
+		dev_info->rx_offload_capa |= DEV_RX_OFFLOAD_KEEP_CRC;
+
 	dev_info->default_rxconf = (struct rte_eth_rxconf) {
 		.rx_free_thresh = IAVF_DEFAULT_RX_FREE_THRESH,
 		.rx_drop_en = 0,
drivers/net/iavf/iavf_rxtx.c +5 -1
index 21d508b3f..d53d7b984 100644
@@ -550,11 +550,15 @@ iavf_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 	rxq->rx_free_thresh = rx_free_thresh;
 	rxq->queue_id = queue_idx;
 	rxq->port_id = dev->data->port_id;
-	rxq->crc_len = 0; /* crc stripping by default */
 	rxq->rx_deferred_start = rx_conf->rx_deferred_start;
 	rxq->rx_hdr_len = 0;
 	rxq->vsi = vsi;
 
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+		rxq->crc_len = RTE_ETHER_CRC_LEN;
+	else
+		rxq->crc_len = 0;
+
 	len = rte_pktmbuf_data_room_size(rxq->mp) - RTE_PKTMBUF_HEADROOM;
 	rxq->rx_buf_len = RTE_ALIGN(len, (1 << IAVF_RXQ_CTX_DBUFF_SHIFT));
 
drivers/net/iavf/iavf_vchnl.c +2 -1
index 25d5cdaf5..c33194cdc 100644
@@ -458,6 +458,7 @@ iavf_get_vf_resource(struct iavf_adapter *adapter)
 		VIRTCHNL_VF_OFFLOAD_FDIR_PF |
 		VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF |
 		VIRTCHNL_VF_OFFLOAD_REQ_QUEUES |
+		VIRTCHNL_VF_OFFLOAD_CRC |
 		VIRTCHNL_VF_LARGE_NUM_QPAIRS;
 
 	args.in_args = (uint8_t *)&caps;
@@ -853,7 +854,7 @@ iavf_configure_queues(struct iavf_adapter *adapter,
 		vc_qp->rxq.ring_len = rxq[i]->nb_rx_desc;
 		vc_qp->rxq.dma_ring_addr = rxq[i]->rx_ring_phys_addr;
 		vc_qp->rxq.databuffer_size = rxq[i]->rx_buf_len;
-
+		vc_qp->rxq.crc_disable = rxq[i]->crc_len != 0 ? 1 : 0;
 #ifndef RTE_LIBRTE_IAVF_16BYTE_RX_DESC
 		if (vf->vf_res->vf_cap_flags &
 		    VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC &&
Signature · 1 line
2.30.0
#29 lore raw

PATCH v6 2/3 net/ice: add the DCF VLAN handling

In reply to Haiyue Wang

Add the DCF port representor infrastructure for the VFs of DCF attached PF. Then the standard ethdev API like VLAN can be used to configure the VFs.

---
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  24 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 334 +++++++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 5 files changed, 444 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ice/ice_dcf_vf_representor.c
drivers/net/ice/ice_dcf.c +1 -0
index 44dbd3bb8..4a9af3292 100644
@@ -234,6 +234,7 @@ ice_dcf_get_vf_resource(struct ice_dcf_hw *hw)
 
 	caps = VIRTCHNL_VF_OFFLOAD_WB_ON_ITR | VIRTCHNL_VF_OFFLOAD_RX_POLLING |
 	       VIRTCHNL_VF_CAP_ADV_LINK_SPEED | VIRTCHNL_VF_CAP_DCF |
+	       VIRTCHNL_VF_OFFLOAD_VLAN_V2 |
 	       VF_BASE_MODE_OFFLOADS | VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC;
 
 	err = ice_dcf_send_cmd_req_no_irq(hw, VIRTCHNL_OP_GET_VF_RESOURCES,
drivers/net/ice/ice_dcf_ethdev.c +84 -7

104 lines not on this page · raw message

drivers/net/ice/ice_dcf_ethdev.h +24 -0
index b54528bea..7695815e1 100644
@@ -22,9 +22,33 @@ struct ice_dcf_adapter {
 	struct ice_dcf_hw real_hw;
 };
 
+struct ice_dcf_vf_repr_param {
+	struct ice_dcf_adapter *adapter;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+};
+
+struct ice_dcf_vlan {
+	uint16_t tpid;
+	uint16_t vid;
+};
+
+struct ice_dcf_vf_repr {
+	struct ice_dcf_adapter *dcf_adapter;
+	struct rte_ether_addr mac_addr;
+	uint16_t switch_domain_id;
+	uint16_t vf_id;
+
+	bool port_vlan_ena;
+	struct ice_dcf_vlan port_vlan_info;
+};
+
 void ice_dcf_handle_pf_event_msg(struct ice_dcf_hw *dcf_hw,
 				 uint8_t *msg, uint16_t msglen);
 int ice_dcf_init_parent_adapter(struct rte_eth_dev *eth_dev);
 void ice_dcf_uninit_parent_adapter(struct rte_eth_dev *eth_dev);
 
+int ice_dcf_vf_repr_init(struct rte_eth_dev *ethdev, void *init_param);
+int ice_dcf_vf_repr_uninit(struct rte_eth_dev *ethdev);
+
 #endif /* _ICE_DCF_ETHDEV_H_ */
drivers/net/ice/ice_dcf_vf_representor.c new file +334 -0

334 lines not on this page · raw message

drivers/net/ice/meson.build +1 -0
index 7b291269d..d58936089 100644
@@ -61,6 +61,7 @@ if arch_subdir == 'x86'
 endif
 
 sources += files('ice_dcf.c',
+		 'ice_dcf_vf_representor.c',
 		 'ice_dcf_ethdev.c',
 		 'ice_dcf_parent.c')
 
Signature · 1 line
2.30.0
#30 lore raw

PATCH v6 3/3 net/iavf: implement new VLAN capability handling

In reply to Haiyue Wang

The new VLAN virtchnl opcodes introduce new capabilities like VLAN filtering, stripping and insertion.

The AVF needs to query the VLAN capabilities based on current device configuration firstly.

AVF is able to configure inner VLAN filter when port VLAN is enabled base on negotiation; and AVF is able to configure outer VLAN (0x8100) if port VLAN is disabled to be compatible with legacy mode.

When port VLAN is updated by DCF, the AVF needs to reset to query the new VLAN capabilities.

---
 drivers/net/iavf/iavf.h        |   6 ++
 drivers/net/iavf/iavf_ethdev.c | 117 +++++++++++++++++++++++--
 drivers/net/iavf/iavf_vchnl.c  | 153 +++++++++++++++++++++++++++++++++
 3 files changed, 269 insertions(+), 7 deletions(-)
drivers/net/iavf/iavf.h +6 -0
index 9754273b2..af11268fe 100644
@@ -139,6 +139,7 @@ struct iavf_info {
 	struct virtchnl_version_info virtchnl_version;
 	struct virtchnl_vf_resource *vf_res; /* VF resource */
 	struct virtchnl_vsi_resource *vsi_res; /* LAN VSI */
+	struct virtchnl_vlan_caps vlan_v2_caps;
 	uint64_t supported_rxdid;
 	uint8_t *proto_xtr; /* proto xtr type for all queues */
 	volatile enum virtchnl_ops pend_cmd; /* pending command not finished */
@@ -310,6 +311,11 @@ int iavf_configure_rss_key(struct iavf_adapter *adapter);
 int iavf_configure_queues(struct iavf_adapter *adapter,
 			uint16_t num_queue_pairs, uint16_t index);
 int iavf_get_supported_rxdid(struct iavf_adapter *adapter);
+int iavf_config_vlan_strip_v2(struct iavf_adapter *adapter, bool enable);
+int iavf_config_vlan_insert_v2(struct iavf_adapter *adapter, bool enable);
+int iavf_add_del_vlan_v2(struct iavf_adapter *adapter, uint16_t vlanid,
+			 bool add);
+int iavf_get_vlan_offload_caps_v2(struct iavf_adapter *adapter);
 int iavf_config_irq_map(struct iavf_adapter *adapter);
 int iavf_config_irq_map_lv(struct iavf_adapter *adapter, uint16_t num,
 			uint16_t index);
drivers/net/iavf/iavf_ethdev.c +110 -7

165 lines not on this page · raw message

drivers/net/iavf/iavf_vchnl.c +153 -0

171 lines not on this page · raw message

Signature · 1 line
2.30.0
Acked-by on the v6 series Applied
#31 lore raw
In reply to Haiyue Wang
Quoted 32 lines

-----Original Message-----
From: Wang, Haiyue <[email protected]>
Sent: Tuesday, January 12, 2021 4:13 PM
To: [email protected]
Cc: Yang, Qiming <[email protected]>; Wu, Jingjing <[email protected]>; Xing, Beilei <[email protected]>; Zhang, Qi Z <[email protected]>; Fu, Qi <[email protected]>; Wang, Haiyue <[email protected]>
Subject: [PATCH v6 0/3] Add AVF & DCF VLAN feaure

v6: code clean, and update the commit log.
v5: seperate the QinQ switch filter with another thead.
v4: make code readable for QinQ TPID setting.
v3: code refactor for handing QinQ according to the VC response.

Haiyue Wang (3):
net/iavf: support Ethernet CRC strip disable net/ice: add the DCF VLAN handling net/iavf: implement new VLAN capability handling

 drivers/net/iavf/iavf.h                  |   6 +
 drivers/net/iavf/iavf_ethdev.c           | 120 +++++++-
 drivers/net/iavf/iavf_rxtx.c             |   6 +-
 drivers/net/iavf/iavf_vchnl.c            | 156 ++++++++++-
 drivers/net/ice/ice_dcf.c                |   1 +
 drivers/net/ice/ice_dcf_ethdev.c         |  91 +++++-
 drivers/net/ice/ice_dcf_ethdev.h         |  24 ++
 drivers/net/ice/ice_dcf_vf_representor.c | 334 +++++++++++++++++++++++
 drivers/net/ice/meson.build              |   1 +
 9 files changed, 723 insertions(+), 16 deletions(-)  create mode 100644
Quoted 4 lines

drivers/net/ice/ice_dcf_vf_representor.c

--
2.30.0

Applied to dpdk-next-net-intel.

Thanks
Qi