mm: Free unused swap cache page in write protection fault handler
Subsystems (2)
PATCH 1/1 mm: Free unused swap cache page in write protection fault handler
Commit 09854ba94c6a ("mm: do_wp_page() simplification") introduces an issue as follows.
On a system with free memory as follow before test,
total used free shared buff/cache available
Mem: 1697300 160156 1459220 8648 77924 1419724 Swap: 1048572 0 0
The AnonPages filed of /proc/meminfo is 11712 kB. After running a memory eater which will trigger many swapins and write protection faults, the free memory becomes,
total used free shared buff/cache available
Mem: 1697300 352620 1309004 624 35676 1252380 Swap: 1048572 216924 831648
While the /proc/meminfo shows,
SwapCached: 198908 kB AnonPages: 1956 kB
Then, with swapoff -a, the free memory becomes,
total used free shared buff/cache available
Mem: 1697300 161972 1488184 8648 47144 1433172 Swap: 0 0 0
That is, after swapins and write protection faults, many unused swap cache pages will be left unfreed in system. Although the following page reclaiming or swapoff will free these pages, it's still better to free these pages at the first place.
So in this patch, at the end of wp_page_copy(), the old unused swap cache page will be tried to be freed. With that, after running the memory eater which will trigger many swapins and write protection faults, the free memory is,
total used free shared buff/cache available
Mem: 1697300 154020 1509400 1212 33880 1451524 Swap: 1048572 18432 1030140
While the /proc/meminfo shows,
SwapCached: 1240 kB AnonPages: 1904 kB
BTW: I think this should be in stable after v5.9.
--- mm/memory.c | 5 +++++ 1 file changed, 5 insertions(+)
mm/memory.c +5 -0
@@ -2963,6 +2963,11 @@ static vm_fault_t wp_page_copy(struct vm_fault *vmf)munlock_vma_page (old_page);unlock_page (old_page); } +if (page_copied &&PageSwapCache (old_page) && + !page_mapped (old_page) &&trylock_page (old_page)) { +try_to_free_swap (old_page); +unlock_page (old_page); + }put_page (old_page); }return page_copied ?VM_FAULT_WRITE :0 ;
Signature · 1 line
2.29.2
Quoted 3 lines · Huang Ying
So in this patch, at the end of
wp_page_copy(), the old unused swap cache page will be tried to be freed.
I'd much rather free it later when needed, rather than when you're in a COW section.
Linus
Quoted 8 lines · Linus Torvalds
Quoted 3 lines · Huang Ying
So in this patch, at the end of
wp_page_copy(), the old unused swap cache page will be tried to be freed.I'd much rather free it later when needed, rather than when you're in a COW section.
Unused swap cache isn't unused file cache. Nobody can reuse them directly before freeing them firstly. It will make COW a little faster via keeping them. But I think the overhead to free them isn't high. While keeping them in system will confuse users (users will expect file cache to use free memory, but not expect unused swap cache to use much free memory), make the swap space more fragmented, and add system overall overhead (scanning LRU list, etc.).
Best Regards,
Huang, Ying
Quoted 11 lines · huang ying
Quoted 8 lines · Linus Torvalds
Quoted 3 lines · Huang Ying
So in this patch, at the end of
wp_page_copy(), the old unused swap cache page will be tried to be freed.I'd much rather free it later when needed, rather than when you're in a COW section.
Quoted 7 lines
Unused swap cache isn't unused file cache. Nobody can reuse them directly before freeing them firstly. It will make COW a little faster via keeping them. But I think the overhead to free them isn't high. While keeping them in system will confuse users (users will expect file cache to use free memory, but not expect unused swap cache to use much free memory), make the swap space more fragmented, and add system overall overhead (scanning LRU list, etc.).
Couldn't we just move it to the tail of the LRU list so it's reclaimed first? Or is locking going to be a problem here?
Quoted 21 lines · Matthew Wilcox
Quoted 11 lines · huang ying
Quoted 8 lines · Linus Torvalds
Quoted 3 lines · Huang Ying
So in this patch, at the end of
wp_page_copy(), the old unused swap cache page will be tried to be freed.I'd much rather free it later when needed, rather than when you're in a COW section.
Quoted 7 lines
Unused swap cache isn't unused file cache. Nobody can reuse them directly before freeing them firstly. It will make COW a little faster via keeping them. But I think the overhead to free them isn't high. While keeping them in system will confuse users (users will expect file cache to use free memory, but not expect unused swap cache to use much free memory), make the swap space more fragmented, and add system overall overhead (scanning LRU list, etc.).
Quoted 2 lines
Couldn't we just move it to the tail of the LRU list so it's reclaimed first? Or is locking going to be a problem here?
Yes. That's a way to reduce the disturbance to the page reclaiming. For LRU lock contention, is it sufficient to use another pagevec?
Best Regards,
Huang, Ying
Quoted 6 lines · huang ying
Quoted 3 lines
Couldn't we just move it to the tail of the LRU list so it's reclaimed first? Or is locking going to be a problem here?
Yes. That's a way to reduce the disturbance to the page reclaiming. For LRU lock contention, is it sufficient to use another pagevec?
I wonder if this is really worth it. I'd like to see numbers.
Because in probably 99%+ of all cases, that LRU dance is only going to hurt and add extra locking overhead and dirty caches.
So I'd like to see some numbers that it actually helps measurably in whatever paging-heavy case...
Linus
Quoted 8 lines · Linus Torvalds
Quoted 6 lines · huang ying
Quoted 3 lines
Couldn't we just move it to the tail of the LRU list so it's reclaimed first? Or is locking going to be a problem here?
Yes. That's a way to reduce the disturbance to the page reclaiming. For LRU lock contention, is it sufficient to use another pagevec?
Quoted 7 lines
I wonder if this is really worth it. I'd like to see numbers.
Because in probably 99%+ of all cases, that LRU dance is only going to hurt and add extra locking overhead and dirty caches.
So I'd like to see some numbers that it actually helps measurably in whatever paging-heavy case...
OK. I will start from a simpler version and only use a pagevec if there's measurable difference.
Best Regards,
Huang, Ying