Skip to contentSkip to conversation

dm crypt: defer the decryption to a tasklet, when being called with interrupts disabled

PATCH In review Ignat Korchagin 2 participants 2 messages Jan 13, 2021 – Jan 14, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dm crypt: defer the decryption to a tasklet, when being called with interrupts disabled

On some specific hardware on early boot we occasionally get

[ 1193.920255][    T0] BUG: sleeping function called from invalid context at mm/mempool.c:381
[ 1193.936616][    T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69
[ 1193.953233][    T0] no locks held by swapper/69/0.
[ 1193.965871][    T0] irq event stamp: 575062
[ 1193.977724][    T0] hardirqs last  enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0
[ 1194.002762][    T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80
[ 1194.029035][    T0] softirqs last  enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.054227][    T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.079389][    T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1
[ 1194.104103][    T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020
[ 1194.119591][    T0] Call Trace:
[ 1194.130233][    T0]  dump_stack+0x9a/0xcc
[ 1194.141617][    T0]  ___might_sleep.cold+0x180/0x1b0
[ 1194.153825][    T0]  mempool_alloc+0x16b/0x300
[ 1194.165313][    T0]  ? remove_element+0x160/0x160
[ 1194.176961][    T0]  ? blk_mq_end_request+0x4b/0x490
[ 1194.188778][    T0]  crypt_convert+0x27f6/0x45f0 [dm_crypt]
[ 1194.201024][    T0]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1194.212906][    T0]  ? module_assert_mutex_or_preempt+0x3e/0x70
[ 1194.225318][    T0]  ? __module_address.part.0+0x1b/0x3a0
[ 1194.237212][    T0]  ? is_kernel_percpu_address+0x5b/0x190
[ 1194.249238][    T0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt]
[ 1194.261593][    T0]  ? is_module_address+0x25/0x40
[ 1194.272905][    T0]  ? static_obj+0x8a/0xc0
[ 1194.283582][    T0]  ? lockdep_init_map_waits+0x26a/0x700
[ 1194.295570][    T0]  ? __raw_spin_lock_init+0x39/0x110
[ 1194.307330][    T0]  kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt]
[ 1194.320496][    T0]  ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt]
[ 1194.333203][    T0]  blk_update_request+0x6d7/0x1500
[ 1194.344841][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.356831][    T0]  blk_mq_end_request+0x4b/0x490
[ 1194.367994][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.379693][    T0]  flush_smp_call_function_queue+0x24b/0x560
[ 1194.391847][    T0]  flush_smp_call_function_from_idle+0x59/0x80
[ 1194.403969][    T0]  do_idle+0x287/0x450
[ 1194.413891][    T0]  ? arch_cpu_idle_exit+0x40/0x40
[ 1194.424716][    T0]  ? lockdep_hardirqs_on_prepare+0x286/0x3f0
[ 1194.436399][    T0]  ? _raw_spin_unlock_irqrestore+0x39/0x40
[ 1194.447759][    T0]  cpu_startup_entry+0x19/0x20
[ 1194.458038][    T0]  secondary_startup_64_no_verify+0xb0/0xbb

IO completion can be queued to a different CPU by the block subsystem as a "call single function/data". The CPU may run these routines from the idle task, but it does so with interrupts disabled.

It is not a good idea to do decryption with irqs disabled even in an idle task context, so just defer it to a tasklet as with requests from hard irqs.

Fixes 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc <[email protected]> # v5.9+
---
 drivers/md/dm-crypt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-crypt.c +5 -2
index 53791138d78b..c56b01bfdb60 100644
@@ -2091,8 +2091,11 @@ static void kcryptd_queue_crypt(struct dm_crypt_io *io)
 
 	if ((bio_data_dir(io->base_bio) == READ && test_bit(DM_CRYPT_NO_READ_WORKQUEUE, &cc->flags)) ||
 	    (bio_data_dir(io->base_bio) == WRITE && test_bit(DM_CRYPT_NO_WRITE_WORKQUEUE, &cc->flags))) {
-		if (in_irq()) {
-			/* Crypto API's "skcipher_walk_first() refuses to work in hard IRQ context */
+		/* in_irq(): Crypto API's "skcipher_walk_first() refuses to work in hard IRQ context.
+		 * irqs_disabled(): the kernel may run some IO completion from the idle thread, but
+		   it is being executed with irqs disabled.
+		 */
+		if (in_irq() || irqs_disabled()) {
 			tasklet_init(&io->tasklet, kcryptd_crypt_tasklet, (unsigned long)&io->work);
 			tasklet_schedule(&io->tasklet);
 			return;
Signature · 6 lines
2.20.1

--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
#1 lore raw

Hi Ignat,

Quoted 47 lines · Ignat Korchagin

On some specific hardware on early boot we occasionally get

[ 1193.920255][    T0] BUG: sleeping function called from invalid context at mm/mempool.c:381
[ 1193.936616][    T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69
[ 1193.953233][    T0] no locks held by swapper/69/0.
[ 1193.965871][    T0] irq event stamp: 575062
[ 1193.977724][    T0] hardirqs last  enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0
[ 1194.002762][    T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80
[ 1194.029035][    T0] softirqs last  enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.054227][    T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20
[ 1194.079389][    T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1
[ 1194.104103][    T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020
[ 1194.119591][    T0] Call Trace:
[ 1194.130233][    T0]  dump_stack+0x9a/0xcc
[ 1194.141617][    T0]  ___might_sleep.cold+0x180/0x1b0
[ 1194.153825][    T0]  mempool_alloc+0x16b/0x300
[ 1194.165313][    T0]  ? remove_element+0x160/0x160
[ 1194.176961][    T0]  ? blk_mq_end_request+0x4b/0x490
[ 1194.188778][    T0]  crypt_convert+0x27f6/0x45f0 [dm_crypt]
[ 1194.201024][    T0]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1194.212906][    T0]  ? module_assert_mutex_or_preempt+0x3e/0x70
[ 1194.225318][    T0]  ? __module_address.part.0+0x1b/0x3a0
[ 1194.237212][    T0]  ? is_kernel_percpu_address+0x5b/0x190
[ 1194.249238][    T0]  ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt]
[ 1194.261593][    T0]  ? is_module_address+0x25/0x40
[ 1194.272905][    T0]  ? static_obj+0x8a/0xc0
[ 1194.283582][    T0]  ? lockdep_init_map_waits+0x26a/0x700
[ 1194.295570][    T0]  ? __raw_spin_lock_init+0x39/0x110
[ 1194.307330][    T0]  kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt]
[ 1194.320496][    T0]  ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt]
[ 1194.333203][    T0]  blk_update_request+0x6d7/0x1500
[ 1194.344841][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.356831][    T0]  blk_mq_end_request+0x4b/0x490
[ 1194.367994][    T0]  ? blk_mq_trigger_softirq+0x190/0x190
[ 1194.379693][    T0]  flush_smp_call_function_queue+0x24b/0x560
[ 1194.391847][    T0]  flush_smp_call_function_from_idle+0x59/0x80
[ 1194.403969][    T0]  do_idle+0x287/0x450
[ 1194.413891][    T0]  ? arch_cpu_idle_exit+0x40/0x40
[ 1194.424716][    T0]  ? lockdep_hardirqs_on_prepare+0x286/0x3f0
[ 1194.436399][    T0]  ? _raw_spin_unlock_irqrestore+0x39/0x40
[ 1194.447759][    T0]  cpu_startup_entry+0x19/0x20
[ 1194.458038][    T0]  secondary_startup_64_no_verify+0xb0/0xbb

IO completion can be queued to a different CPU by the block subsystem as a "call single function/data". The CPU may run these routines from the idle task, but it does so with interrupts disabled.

Quoted 6 lines

It is not a good idea to do decryption with irqs disabled even in an idle task context, so just defer it to a tasklet as with requests from hard irqs.

Fixes 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues")
Cc <[email protected]> # v5.9+

Thanks for working on this.

Looking at all these patches submitted in the last few weeks it seems to me that there are some non-trivial implicit assumptions in dm-crypt which are invalidated when bypassing its workqueues.

It might be difficult to find the more subtle of them by trial and error, especial these which don't cause crashes but silent data corruption instead.

I wonder if somebody with block and Crypto API knowledge could chime in here to statically review the code - I've added linux-crypto and linux-block to the CC list.

By the way, I would appreciate if you could CC on dm-crypt "no workqueue" patches since I am interested in this functionality.

Thanks,
Maciej